Stop Adaptive contrast on laptop Z710

I've been struggling with this for months, I can't take more.

It's a Z710 with Intel and Nvidia GeForce, as well as Windows 8.1.

My laptop's brightness according to what is shown on the screen.

On these forums, it is perfectly clear and white. On any other site with a colored background (even worse if it is black or dark grey colors), it darkens. Then, when I switch back to a site with a clear background, he returned to my favorite brightness.

I can literally barely see then, because I have problems eyepieces and need all the time with a maximum brightness. If I'm trying to play a game or read whatever it is, the contrast is terrible and brightness is low, so it is almost impossible.

I went into settings Intel and disabled (under the battery), I tried to go in Nvidia, I disabled the sensor via services.msc, I turned off via the control panel. There is no option in the settings menu of charm. What google has offered - I tried.

Does anyone have any suggestions as to what I can do?

Resolved.

For anyone else having this problem, go to the Manager of energy and change your settings to high performance (the rocket). More adaptive step contrast

Tags: Lenovo Notebooks

Similar Questions

  • HP Simpletouch stop working on my laptop ENY 6 m how trouble shoot

    HP Simpletouch stop working on my laptop ENY 6 m how trouble shoot?

    Hi BigMike,

    Welcome to the HP Forum!

    SimpleTouch is a Nook eReader. ?

    If you mean SimplePass, then

    start by:

    • Unplug everything from the laptop,
    • It stops completely
    • Perform the Hard Reset .  Start the computer and connect

    Then, take a look at this guide:

    Simple Instructions for upgrade HP SimplePass

    Click on the star of congratulations !

    It's a nice way of saying 'Thank you' for help.

    Although I strive to reflect best practices of HP, I do not work for HP.

  • USB wireless adapter for computer laptop problem

    Hello:

    The HP laptop with XP get "Low" signal every time I'm in the other room that is not too much longer off the router, about 60 to 70 feet away from him.  Then, yesterday, I got USB Netgear adapter in the hope of trying to get more signal.  Because, says a guy in the store of the computer installation USB adapter is 'boost' to get decent and more signals.

    When I installed the Netgear adapter for the laptop, there is no signal at all and to appear the following message appears in the middle of the screen.

    NETGEAR 111v3 Smart Wizard, WEP Passphrase to create WG and the key manually

    My question is;

    How to install the USB Netgear adapter for laptop?

    Thank you for your help in advance.

    Hello

    The general idea that a USB adapter is a bit a booster dose is false. I'm not sure that you will get the USB Ant thing you don't get the laptop.

    According to the physical environment, 60 to 70 domestic feet with walls is probably beyond the capacity of the wireless router.

    As for your specific question, it seems that USB is correctly installed but must adjust its password security to your current wireless network.

    In general.

    My wireless is not working - http://www.ezlan.net/wireless.html

    Basic wireless configuration - http://www.ezlan.net/Wireless_Config.html

    Wireless Security - http://www.ezlan.net/Wireless_Security.html

    Extending remote - http://www.ezlan.net/Distance.html

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • Windows Vista Basic has stopped working on my laptop.

    After my recent updates, Windows Vista Basic has stopped working on my laptop.

    After my recent updates, Windows Vista Basic has stopped working on my laptop.

    Hey shousell

    stoppped working covers a lot

    If you can not start, follow these steps

    1st thing to try is a restoration of the system in safe mode

    http://www.windowsvistauserguide.com/system_restore.htm

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    If that does not read this information

    the link below is how to download and get a vista disk startup repair, which you can start from the

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

    It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

    Change boot order it do dvd drive 1st in the boot order

    or transfer your question in forum windows update link below

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    Walter, the time zone traveller

  • What is this and how can I stop\adapter 'Atheros ARR9285 fall in my network, I can't download my norton360 top?

    What is this and how can I stop\adapter 'Atheros ARR9285 fall in my network, I can't download my norton360 top?

    What is this and how can I stop\adapter 'Atheros ARR9285 fall in my network, I can't download my norton360 top?

    Atheros ARR9285 is a wireless network adapter.

    Problems with Norton 360 should be directed to Norton Support: http://us.norton.com/support/

  • How can I activate a wireless adapter on asus laptop

    How can I activate a wireless adapter on asus laptop

    Try the function key (FN) + F2

  • While the suite war Thunder game stops and restarts my laptop

    Original title: war Thunder crashing

    Hello

    I have a Dell Inspiron 7420. Recently, when I play War Thunder, the game just stops and restarts my laptop. There is no warning, all of a sudden shows a black screen and the auto restart my laptop. What happens to the login screen.

    Hi Pinaki displayed,

    Really sorry for the relply ULTRA end. BTW, it's always the same Amos. I tried reinstalliing the windows 8 and all that kind of stuff and I think it's a hardware problem. I'll be sending my laptop to a PC repair shop soon. Thx for your help! Really of sry for long wait.

  • Audio suddenly stopped working on my laptop

    My audio suddenly stopped working on my laptop. It runs on windows 8, and it's an acer. I tried restarting the computer and troubleshooting audio through the control panel. Netflix is said the problem is related to Silverlight, but it seems to work very well. I tried to uninstall and install again, but that has not worked. Also tried to install the audio drivers from the acer Web site... nothing. Also downloading windows 8.1 in case that is useful...

    OT: Audio does not

    This occurred after the most recent Windows update? (around 7/10)? If so, the KB2962407 update may have been the origin of the problem. I fixed it by uninstalling this particular update. Details can be found here:

    http://www.eightforums.com/sound-audio/49684-no-sound-device-being-used-another-application-7.html

  • Receive vc system tray restart error message. How can I stop this on my laptop?

    Hello

    Get VCSystem plateau is restarting error message. How can I stop this on my laptop? My laptop model number is

    VPCEB4AFX.

    Hi nagk98,

    I'm sorry to hear that you are having problems with your laptop. The plateau of VCSystem is a process used by the VAIO Care program. To solve this problem is that you need to upgrade your VAIO Care program. You can uninstall and re install the program if VAIO update fails. You can check this link for more information on the VAIO update utility. I hope this helps.

    Thank you!

    Sean

    If my post answered your question, please mark it as "accept as a Solution.

  • Adapter WiFi my laptop has suddenly stopped working.

    Operating system: Microsoft Windows 7 (32 bit)

    I was in the middle of my routine of navigation when all of a sudden:
    -My WIFI is out
    -Light network on my laptop (F12 key) turned RED
    -Not visible in Control Panel networks with wireless networks.

    I did something unusual or installed software or antivirus software etc., which could possibly cause this.

    So far, I tried on but none of them worked.
    -Deactivation and activation then the WIFI adapter.
    -Uninstalling, then reinstalling the latest driver for the WIRELESS card.

    -WiFi F12 key.

    Help, please.

     

    System Imformation:

    HP Notebook 1000 series

    Windows 7 Home Premium 32 bit
    RALink RT5390R wireless 802.11b/g/n 1 x 1 adapter
    I use my Microsoft Security Essentials antivirus.
     

    Umair salvation,

    Please provide detailed information about your question. I appreciate the step by step troubleshooting, and pain that you have taken to resolve your problem. However, there are a few steps more that we can try to diagnose the root cause of the problem.

    I would be grateful if you can provide us with the following information to help us better understand the issue.

    1. Are you able to connect any other wireless device to the same network?
    2. Are all the lights on the Modem/Router Green?
    3. Have you tried to connect your HP laptop with wired network? If so, was the same result?

    Problem with the random disconnection of a wireless network can be triggered for a variety of reasons. To find out the exact cause of the issue, I would recommend that you run the network troubleshooter utility.

    Network convenience stores

    This problem can occur if authentication enable IEEE 802. 1 X for this network checkbox is enabled. If this box is checked, but there is no server to authenticate the connection is interrupted. If you turn on the wireless network connection, it disconnects again after a short period.
     
    Method 1: Disable IEEE 802 authentication. 1 X

    To disable authentication IEEE 802. 1 X, follow these steps:

    • Click Start, type ncpa.cpl, and then press ENTER.
    • Right click on your wireless network connection and then click Properties.
    • Click the wireless networks tab.
    • Under preferred networks, click your wireless network, and then click Properties.
    • Click on the Authentication tab, click to clear the authentication enable IEEE 802. 1 X for this network
    • Check box, and then click OK twice.

    Method 2: Disable the IP assistance service

    • Hold down the Windows key and type R, type "services.msc" (without the quotes) and press enter
    • Scroll down to the IP assistance service, right-click on it and select Properties
    • In the drop-down list box that says "Automatic" or "Manual", set it to disabled and then click 'apply '.
    • Then click on "Stop" to stop the service from running in the current session
    • Click OK to exit the dialog box.

    Method 3: update the Firmware on the router

    Download and install the latest firmware for the router, in case the steps above fail to resolve the problem. If your router is Netgear, then you can follow the steps below.

    NET gear 3700 firmware update

    Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

    Kind regards

  • M/S update stop my WiFi adapter on my laptop

    I'm under the M/S Vista on a Sony Vaio laptop. Today, M/S is an update of Silverlight without my agreement. The result is that I now can't use WiFi on this laptop since the way through boot, seeing WiFi turns off 0 and reports of windows that the switch has been turned off. This happened last year and has been overturned when M/S did another update that has eliminated the problem they created. Someone at - it no indication on what to do to recover the WiFi?

    Hello

    You can access the site from Sony and re - download the drivers for your model...

    http://eSupport.Sony.com/

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    You can also use this method to stop it happening again.

    Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

    You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

    But unfortunately, the only way to know which is the update of the problem is to install them one at a time, until you find the one 'bad' for your installation (you think it's the Silverlight one).

    You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

    'Remove an update'

    http://Windows.Microsoft.com/en-us/Windows-Vista/remove-an-update

    When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

    "How to hide or show an update of Windows Vista"

    http://www.Vistax64.com/tutorials/72491-Windows-Update.html

     

    Here's how to chanage update settings, if you think it is necessary to:

    "Understanding Windows Update and Extras in Windows Vista and Windows 7.

    http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

    Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

    Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

    Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

    But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

    See you soon.

  • is it safe to keep the power adapter plugged into laptop all the time?

    I was constantly using a laptop Pavilion DV6-1230 we 5 years almost always with the power adapter is plugged in. I replaced the battery once. I was told yesterday that this isn't a good idea, because it can lead to a shorter battery hardware and life issues. We buy a new computer and want to know what is the recommended method for the use of current alternative with a laptop. Is always connected OK? Or we stop the computer at the end of the day? The power plug must be removed from the plug?  Appreciate the suggestions and recommendations on best practices in this case.

    Hello:

    It is not a good idea to leave the power cable connected with the battery in the PC.

    You should disconnect the power supply at least once a month even if you move the laptop, run Notepad as needed and let the battery drain down until you get the low battery warning.

    Then load it up.

    Here is a useful guide of HP to prolong the battery life...

    http://support.HP.com/us-en/document/c01297640

  • I have a mac book pro 2009 model, now when I try to load it, there is no green light on the adapter and the laptop does not charge. Not sure if there is a problem with the card or the battery or the laptop. Kindly help

    I have a Mac book pro 2009 model, when I try to load it it not there no green light on the adapter and he is in charge. Not sure if there is a problem with the adapter or the battery or the laptop. Kindly help... Thank you

    Have you tried:

    Portable Apple computers: Troubleshooting MagSafe adapters - Apple Support

    This is the Office Mac Pro forum. I asked that your post be moved to the MacBook Pro laptop forum.

  • Integrated webcam has stopped working on my laptop Satellite

    My laptop integrated webcam has stopped working, I tried to check the properties of the device and uninstall and reinstall the driver, but all I get in the device status is

    This device cannot start. (Code 10)

    The I/O device is configured incorrectly or the configuration of the driver settings are incorrect.

    I can't find anywhere to change something as im don't know what to do.

    Can you please tell us which model of laptop and what operating system are you using?

    By the way: since when did you notice this problem of webcam? It started one day to the next?

  • Keyboard stopped working on my laptop Satellite

    Hello

    Some of the keys on my laptop suddenly stopped working today and slowly seem to have problems with more keys (they are does not at all or typing a letter or a symbol for the key, sometimes more than one letter).

    I tried to turn off my computer for awhile, and now my sound doesn't work either.

    Help, please.

    * edit: * sound came back.
    I just hope he stays.

    still some problems with the right keyboard and having to use the on-screen keyboard to type

    Post edited by: Hatem

    > still have problems with the keyboard well and having to use the on-screen keyboard to type

    In your case I would recommend you to connect an external USB keyboard and test the laptop as part of this external keyboard.
    In case the external keyboard would work perfectly, the problem is not related to the keyboard controller, but your internal keyboard and to solve this problem, the internal keyboard needs to be replaced.

Maybe you are looking for