Motherboard replacement for a Presario all-in - One SG2 - 210UK

Similar Questions

• How to adjust the brightness and contrast for Compaq Presario all-in-One CQ1-1007 D desktop PC

  How to adjust the brightness and contrast for Compaq Presario all-in-One CQ1 - 1007 D desktop PC? THX.

  There were buttons No. brightness and contrast on the front of the monitor-no onscreen menu.

  On your desktop,.
  Right-click to select graphic properties->

  in display settings, click Advanced settings
  Here you go, you can do almost anything with the brightness

  Hope it helps

• I replaced my Photosmart 2570 all-in-One with Photosmart 5520. I can print all programs except

  I replaced my Photosmart 2570 all-in-One with Photosmart 5520. I can print to all programs except the HP Image Zone. It shows the right default printer. When I print a photo 4 x 6 prints only part, and it is slightly enlarged. My operating system is Windows XP. Do you need any other information? Thank you. Peggy

  Hi PeggyOlson,

  It is an older program used with your 2570. Try to download and install the new photo software from the link below.

  HP Photo Creations

  HP Photo creation FAQ

• Cannot find driver for HP 2710 all-in-one anywhere that works.

  I read the questions / answers on the printer drivers for my new laptop with Windows 7 and it seems that nothing is exhists for my HP 2710 all-in-one.   The driver that Windows only supports the printer, not the scanner or fax.  Many answers recommend to contact HP for the pilot, but HPs response is to use that Microsoft has in the computer.

  I don't know why Microsoft Gets a complete driver for this popular all-in-one printer.  My new Mac Book in their OS and it will interface with all functions beautifully.  He finds the printer, scanner and fax and installed the flawless drivers.   Now that I bought a PC even once, it's frustrating to find that Microsoft has yet to produce a stable product compatible XP that was at least good support with software companies and hardware.   Should I really buy all new software and equipment to own a PC these days?

  Just in case where you were not already in the running of it here is a link to HP described as workaround to make the scanner and fax from the HP 2710 works with the driver included in Windows 7:http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01796736&lc=en&dlc=en&cc=us&os=4062&product=420428&sw_lang=&key=null&site=null#N341

• I can't install update for hp printer all in one remote Dungeon, is ox80073cf6 of error.

  * Original title: hp printer all in one remote control

  I can't install the update for hp printer all in one remote control. keep getting error ox80073cf6

  You need to contact HP.  They are experts in their software & hardware.

• Wireless LAN card seems to be missing on my Compaq Presario all-in-One CQ1 - 2025 Office PC.

  I can't find my wireless anywhere LAN card. I had until I changed to October last IP and now - no wireless icon. I have reset my pc as long as you plant and still no wifi! Help!

  Hello cbnolen,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that your wireless card disappeared and does not always show after doing a recovery of the plant on your Compaq Presario CQ1 all-in-one - PC of office of 2025. The problem you describe seems to be a physical problem, and I think it would be better if you contact HP Support for service options.
  
  I want to thank you for display on the HP Forums. Have a great day!

• failed to install for photosmart b109 all-in-one a - m. has said usb not connected to the computer

  I replaced Vista with a new version of windows 7 64-bit and cannot get my HP Photosmart B109 all-in-one a - m at the end of the installation I downloaded from the HP site. I uninstalled this printer as suggested before attempting the download. He gets to the part where you plug in the power and then the lights on the printer the computer tells me that my USB key is not plugged into it. I tried changing USB website and tested the USB connections and ensure that they work on the computer, but still the same response. The program then continues to stay on the installation of the final software and never complete. Talked with a local tech guy who suggested that you contact because he has no idea.

  Hi, thanks for the suggestion. However, I did not upgrade but remove vista altogether. I found the problem after a lot of grief and research - there was a cord that had fallen on the back of the library that was not plugged in!

• Compatibility SSD for HP touchsmart all-in-one PC?

  Hey all, my parents have a HP Envy 23 Touchsmart all-in-one PC. The model number is 23-d117a.

  He has a mechanical hard drive 2 TB in it, and I want to replace it with an SSD for Christmas. I have no qualms with opening on the back of the PC and on the hard drive Bay to do the physical installation, and I can understand how to clone the content of the hard drive on the whole quite easily.

  I just want to know if there will be problems with compatibility. I guess most of the time a hard drive is a hard drive and that it will work as long as it uses the correct file format, but I don't know if HP has put any kind of limits on the machine that prevents him from working.

  In addition, it is less important, but if anyone can recommend a good support to the smaller SSD fit into the 3.5 HARD drive enclosure and again the line upward with the connectors, I'd appreciate it.

  Thanks for your time.

  Hello @Solidiquis,

  I understand that your question is if there are restrictions on the use of a DSS on your parents HP ENVY 23 - d117a TouchSmart all-in-One desktop PC. As much as I know there is no restriction on the use of a Solid State Drive on this computer. In fact, I found this document for computer explaining the differences. FAQ of propulsion hybrid Seagate Solid State. As for the recommendation on the necessary adapter unfortunately I can not make a specific recommendation, but I believe that everything will work. Here is an example of what you are looking for StarTech.com 2.5 "to 3.5" SATA aluminum box drive hard adapter with SSD/HDD up to 12.5 mm height.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• HPDeskJet 1050: Download the drivers for my hp all-in - one deskjet 1050

  Where can I download drivers for Hp deskjet 1050 all-in-one printer for printerJ410a

  Hello

  You can download the software installer full of features for Windows 7 on the following link.

  http://ftp.HP.com/pub/softlib/software12/COL32611/al-109412-3/DJ1050_J410_1313-1.exe

  Kind regards

  DP - K

• I don't remember the name of softerware for my HP All in one Printer

  I have a HP J4580 printer. I had my recently re-created PC. I don't remember the name of the software that I had which had all my functions in it. Scan, copy, e-mail, fax, percentage of printer cartridge.  Nobody know, don't forget the name of this software?

  Hello

  Could be the HP Solution Center or HP printer Assistant. Please select the operating system for your software features full doanload computer and the driver from the following link and install it on your computer:

  http://support.HP.com/us-en/product/HP-OfficeJet-J4000-all-in-one-printer-series/3645081/model/3645099/drivers/

  Kind regards.

• PSC 1350 all-in-one: HP Director for PSC 1350 all-in-one - using Windows 10 (64-bit)

  Hello!  I recently had a new hard drive installed on my Samsung laptop year-and-a-half-year-old, as well as 10 (64-bit) Windows as well. Instead of using the original installation disc for my printer range all-in-one HP psc1350 (bought 1/2004), I have used your site and just did a download tonight HPPIW. EXE .  My question is: I do not see the original HP Director on the desktop now after the above file download. The copying, printing, scanning are all working well, if that's fine! So all the "Director" now wonder, if I can get in a way that - since the original my installation disc or HP support Web site? Thank you, CR-Issquah (26/08/2015, 21:00 - PT)

  Hello

  HP Director has been supported only for your printer up to Windows XP, since Windows Vista full features software is no longer available for your printer, and there is no HP Director application or provided HP solutions Center.

  You can follow the following document which lists no available workaround solution and the limitation of the provided solution:

  http://support.HP.com/us-en/document/c04740294

  Shlomi

• F375: Software & Drivers for Windows 10 / all-in-one printers, HP Deskjet F375

  When drivers and software will be available for the all-in-one printer HP Deskjet F375 for Windows 10?

  Current software and drivers for F375 on HP downloads (updated August 28, 2014) are for Windows 8 will not install on Windows 10. HP Solution Center will not work.

  This printer is listed as compatible Windows 10.  What happens when you try to install io?  Have you tried to use the Printer Wizard?

• problems with the installation of the driver for hp 6300 all-in-one under Windows 7

  I have not install hp 6300 all-in-one driver a10_cdb_net_full_win_130_141.exe I downloaded from the HP website.  The diagnostics said: "this application has requested the execution to terminate in an unusual way.  Please contact the team for more information application support. "Please explain what is happening.

  Thank you

  Peter

  Hi petervol,

  Download and install the following hotfix below and then run the instructions to uninstall & reinstall the printer.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-77751-1&CC=US&DLC=en&LC=en&os=4063&Product=1119598&sw_lang=

  Try using the brush included in the CD or download.

  Of the Original installation CD:

  1. Insert the CD in the drive and then cancel Setup

  2. open my computer and click right then on the CD from the drive and select open

  3 open the Util folder

  4 open the CCC folder

  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-76831-1&CC=US&DLC=en&LC=en&os=4063&Product=1119598&sw_lang=

  10. run the download to reinstall the printer

  If the software has been downloaded and extracted to your system:

  1. type % temp % in the field of race

  2. Locate and open the folder starting with 7z (example: 7zS2356)

  3 open the Util folder

  4 open the CCC folder

  5. If you have an HP computer, run the L3uninstall.exe. If you have a computer not HP, run the L4uninstall.exe

  6. once the uninstall is complete, restart the computer

  7 run the Accessories\ System Tools Disk Cleanup

  8. download and install the latest version of Adobe flash player

  http://www.Adobe.com/support/flashplayer/downloads.html

  9 download drivers and full software features

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=MP-76831-1&CC=US&DLC=en&LC=en&os=4063&Product=1119598&sw_lang=

  10. run the download to reinstall the printer

• How to connect an additional monitor for the gateway all-in-one?

  Hello you all, I have a question I hope you a lot more smarter computer people can help me with. I have a friend who has a gateway all in one model #-ZX4931. It has a VGA port on the back. It has been also updated for Windows 10. I'm house sitting and dog looking for her in a few weeks

  I want to plug the additional monitor which by the way, it's a Dell (sorry) to work on a project I'am doing right now. I try to use the screen that she has on the All In One and I didn't like how my project came out looking

  I see on the back of its All In One, it has a VGA port. I Google several times and different words from Google, which told me that you cannot plug an additional external monitor for all in one PC, so I'm confused as to why there is a VGA port, if you couldn't plug the external monitor

  in any case, can someone please help me and give me details on how to connect an external monitor, in addition to its gateway all in one model #-ZX4931

  Looking at your specific model, I think you can try to connect an external monitor via the VGA port.

  Once you have connected the secondary monitor using the VGA port, press control + p and main Windows logo if you are able to extend or clone your desktop.

• Need printer driver generic for Officejet 7210 all-in-one on Windows 8.1

  Updated my Windows 8 Windows 8.1, who took my print driver for an all-in-one Officejet 7210.  Tried to reinstall.  Error file not found.  Detailed monitoring of the process of a t-shirt (temp deleted files, deleted startup, programs).  Driver does not work but the printer does with other computers.  Printer is no longer supported and no help (but is in good working condition).

  I'm looking for a generic driver that will work with my printer and Windows 8.1.  I appreciate a lot of help...

  Hi LChristofaro,

  I have studied your error message and the Msiexec.exe error and this is a problem with windows install. I would recommend restarting your windows installer.

  To do this:

  1. run "Services.msc" (without the quotes).

  2. double-click on "Windows Installer" in the Services list.

  3. click on stop, and then click OK.

  4. Click Start, and then click OK.

  You restart the computer and try the installation again.

  Let me know if this helped.

  Thank you