Motorola atrix mb860 for ICS

Similar Questions

• Re unlocked Motorola Atrix (MB860) use in to THE

  ATT unlocked my Motorola Atrix 2 (MB860). I am in Australia and bought a Vodafone SIM card. The voice works fine, but there is no data connection (which is included in the plan I bought). Called technical Vodafone and they sent me a "Profile Configuration" file via SMS to install to run the Internet connectivity. I am hesitant to install it. But they promised that this will not negatively affect my phone (but yet they cannot explain what it does).

  Can someone explain what this Config profile could do to my phone, and why it is necessary? And why I can't do it myself via the phone settings? My background is engineering network, I'm also curious. Pointers to explanations already on the Web would be fine.

  It is my first foray into data usage in other countries. Thank you

  Dave

  There are pay services (and some carriers) for this same function. Basically, it is supposed to set your APN settings so that you have the data connection. Just add an additional parameter that you can disable or remove if you wish!

  You may need to go to a level more high support to get the actual content - my guess is that phone representatives will only send the config files.

  It's very nice of them that several carriers just throw up their hands and make you find the settings on the line.

• Motorola Atrix 4 G camera won't initialize

  The stock for my Motorola atrix 4g camera does not work. When I pull the top of the camera or camcorder. The screen is black. As if there is something blocking the lens. Camera overlays are present. The shutter button and zoom in and out keys. After a while, I get an error message "Failed to initialize the camera" then I have to force close. There is nothing of blocking the lens. I thought it was a software problem. I've tried everything. Date of factory reset twice. I tried different camera software, removed the battery, power cycles. Nothing works. Everything else works fine. I scoured the internet for a solution. There is no solution, only the complaints from other users of android with the same question. I think it's a hardware problem. I have one question. Do you know if the replacement of the camera on the device will solve the issue? Thank you.

  If it helps the phone got really hot at a time where the screen started turning black on the upper right when the camera is located on the other side. That may have something to do with it.

  But I want to know if the camera replacement will solve the problem for me. Thank you.

  I SOLVED THE PROBLEM

  It's a mechanical problem. I replaced the flex Ribbon that holds the camera, the volume buttons and front detectors. When I removed the Ribbon flex, I noticed a burn mark on the underside of the flex Ribbon. Thus, the reason that the unit stopped working because the phone has overheated twice and stop. That had something to do with damage to the Ribbon of flex.

  So, after replacement of the flex Ribbon. The camera is fully functional. If you encounter this problem, the only way to fix it is to have the flex replaced Ribbon.

  If you want more information, please let me know. I want to help.

• Setup Motorola Atrix with Google TV via a HDMI device problem, help?

  I'm curious to know if anyone has had problems with implementation of devices via HDMI or using the Motorola Atrix (I'll be crossed this announcement on the forums Android and Motorola too to see what response I'll be there too).

  "After connecting my Atrix, turned to the Google TV (29') using the HDMI cable I got with the phone, I go to 'Settings' > 'Video input' > HDMI settings" > "Device list" > and click on "Enable", I get an error message that says:

  No HDMI devices have been found. Please check the connections.

  Thanks to a default function I chose, the "remote control" screen on my Atrix.

  I tried all four cards HDMI on the TV and received the same error message.

  Anyone would be able to help me solve this?

  I have the Sony NSX24GT1 24 and my phone is a Motorola Atrix Mobile phone black MB860 running on the Android 2.3.4 version.

  p.s. I really like my phone and I really like my TV and the possibility of using the two together! I really hope I can get help with this. Thank you!!

  Fixed! I had to press the input button on the very complicated, heavy Google TV remote control button (bad design).

• I need to sync to a new computer with a motorola atrix

  I bought a new computer, and now all of my favorite Office are available only on my phone Motorola Atrix. I have the sync key that has been used when I created the mobile, but none of the synchronization of the directions address back on the desktop.

  Thank you
  Lori Peyerk

  You will need to synchronize the user name, password and key to download the news of synchronization on your new computer.

  Firefox button > options > sync

  • In the add a device screen, click on I don't have the camera with me.
  • Then, enter your account name (email address) and password, Sync key click

• How to update Motorola atrix 4.0.500.ME860. Retail.en.05 to the gingerbread

  How to update Motorola atrix 4.0.500.ME860. Retail.en.05 to the gingerbread

  Froyo 2.2.2

  Bought in Hong Kong, to aid in India

  surajrk, if your Atrix is the Hong Kong version, you should receive an OTA update. Otherwise, try to access

  http://www.motorola.com/update, select Hong Kong, choose ME860 and download the update of the Motorola software.

• Buy now or wait for ICS?

  When I'll be able to find a tablet on the shelves of stores Best Buy with ICS on that? Want to buy my first android Tablet and wait it killing me.

  Generally, things are getting cheaper and better times light on, except automobiles and services by cable, so if you wait it will be better BUT you lose the use of it NOW!

  If you are looking for the Xoom to does what you want then I would buy it. I bought my Xoom almost a year ago and I have never regretted. Not like the time where she said "Marine Hey let me show you something."

  Seriously, if you use a product then there value and the value of this product is lost when you do not have to use. It will be cheaper and certainly better later but all this time how could did you use your Xoom for what you wish for, then you are indeed lose this value. If you have never purchased a Tablet, you would save a lot of money but it is better savings for not having to use?

  If the Tablet does what you want today, then buy and enjoy now. The Xoom is supposed to get ICS and you will be able to use it while you wait for ICS.

  TFG

• Where the fix for ics

  I was wondering where the fix is for Ics battery problem? I'm on my fourth replacement and it is not the phone. Can someone give a guess on what help is coming?

  
  

• Whenever I connect my Motorola Atrix to the PC, Windows XP closes and the PC freezes

  Original title: Smartphone closes windows

  Whenever I connect my Motorola Atrix to the PC, Windows XP closes and the PC freezes. Does anyone else have this experience.  The connection works fine on my laptop.

  Hi patsatrix,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  3. This occurs when you connect other USB devices also?

  You can try to configure the computer so that it starts cleanboot and check if it helps.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353/en-us

  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  Hope this information is useful.

• Motorola Atrix HD MTP driver fails to install

  Update my phone Motorola Atrix HD, tried to install the latest drivers from Motorola via their package install MotorolaDeviceManager_2.3.9.exe.

  Software appears to install correctly, but when I connect the phone, it shows the installation of drivers in the sandbox, but will appear then the MTP driver fails.  I have tried to uninstall the driver from Device Manager, where it shows device MTP with yellow triangle, restart, then install the drivers and then connect the phone again, same results, have tried several times.

  The driver in the device, shows the error 52 code Manager, which means it does not recognize the digital signature of the driver, but I know that it is a valid driver of Motorola, so what gives?

  Operating system is Windows 7 Pro 64 bit.  I read many forums and nothing seems to have this problem of fixing.  Any ideas would be appreciated.

  Thank you

  Hi Chris,

  A yellow exclamation mark next to a device in Device Manager means that Windows has identified a problem any with this device.

  The yellow question mark is displayed as the full size of the device icon and appears when a device is detected but not installed.

  Try the following methods and check.

  Method 1:

  I suggest you to run the Microsoft Fixit and check if it helps.

  Hardware devices do not work or are not detected in Windows: http://support.microsoft.com/mats/hardware_device_problems/en-us

  Method 2:

  If the problem persists, I you suggest to uninstall the drivers and software and then try to reinstall the same and check if it helps.

  Uninstall or change a program: http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program

  Hope that the information provided is useful.

• Motorola Atrix 4.1.57 updated for Non - AT & T users?

  I am currently with Bell Canada, and when updates are available? Can I download the update manually?

  (

  ( http://www.motorola.com/staticfiles/Support/US-EN/Mobile%20Phones/ATRIX_4G/US-EN/Documents/StaticFil...)

  Thanks again!

  . Eric

  @Eric

  This update (4.1.57) is for AT & T only. This update is not currently available also for Bell Mobility. We will provide details if an update is available for Bell Canada. The update method may vary, but we like to do Over the Air updates as much as possible.

  If you have a phone unlocked from AT & T you get the update if you are using official factory installed software. If you have changed the software of your phone in any way he can make it difficult to update. Your profile shows "Rogers" If you indicated Bell in your original post.

  Mark

  Support Forums Manager

• Join fusion/Contacts: Atrix 2 and ICS

  I just upgraded to ICS on Atrix 2. I can't find a way to join/merge two contacts in my contact list. Can someone help me, please?

  You still have separate contacts merge in ICS. go to the contact that you want to merge... Open the contact information... Press menu, click Edit, when you get the screen change, once again the menu button, select join... and you'll get suggestions or you can slect who to contact for merge wirh... Select the contact, and then click on save option on top...

• How to buy a genuine replacement battery Motorola Atrix

  I would like to have another, anyone know how to get one?

  Website of ATT, Motorola, don't list one.

  Of course, I could get Chinese knock-off batteries by the cargo, but those who are not reliable and could explode and aren't just worth the hassle.

  Any suggestion employees of Motorola?

  It's a Motorola BH6X. It is listed as an 'Extended' Droid X battery, but that's the one even in the Atrix.

  Here it is in the Motorola store: link

  You can also find it on some popular sites of 'shopping' as well, just use the model number. (I don't want to enumerate all specific sites because of Community regulations)

  Oh, you might be able to find in a Verizon store, just ask for the Droid X Extended Battery and make sure it's a BH6X and NOT a BH5X.

• < DOUBLE > Motorola Update Services for bike e

  Motorola has launched its "update services" for users of bike e also. Hope that the android will be available shortly.

  There is already a thread on this topic here:

  https://forums.Motorola.com/posts/c76c91c8e3

  Please use search before starting a new thread.

  Search is your friend.

  Closed.

• Motorola Xoom wifi Upgrade ICS

  I have participated on my D2 gingerbread update, and I also wanted to take part in the trial of impregnation ICS for my zoom of woman. Please thank you. If you can let me know what I need to do to take part in this.

  The wifi only Xoom uses the Mac address and not the serial number for registration, unless something has changed in the last three days. Using the serial number will generate an error message, so you'll know whether you have entered the correct number.