Mouse audition CS5.5 scrolling problem

Similar Questions

• Audition CS5.5 reinstall problem

  Hi, I have audition cs5.5, which was an upgrade to version 1.5. When I bought what I needed to call adobe to get a response from code challenge to activate because there seems to be a problem with the sn for version 1.5. Adobe then issued me with the code and all was good for a few years.

  I now have a new system that I want to install this software on and once again had the same problem. I contacted the online support from adobe who were able to guide me here because they take in charge the newer versions (I also have a subscription of clouds, but as I paid for these permanent licenses I want to use them on additional systems).

  I need help here from Adobe please that you are the only ones who can legally give me a code.

  I recorded all of the software and everything is legal and paid,

  Thanks in advance

  Trevor

  Hi Trevor,

  While I don't have access to the confidential information of the user, we will see if there is anything we can do here to help.  First of all, I'm not clear why the installation asks for a challenge code any.  CS5.5 update serial numbers should not be if I remember correctly, ask a serial number legacy to validate ownership of a previous version - I think that this was done on the Web site when buying, as serial number authentication algorithms were not compatible.  Version CS5.5 should 'phone home' during the installation to authenticate valid serial number.  Only if this were not possible, usually the computer being completely disconnected, exist an alternative activation method where you would need to give a challenge code to a customer service representative and respond with the code they provide.

  If you are not able to activate the default method and must use code challenge, it is entirely the responsibility of our customer service representatives, but I suspect that they do not see those who ask more often.  If you try again and get the same answer after explaining, you can not activate using the default method, please let me know and I'll investigate more on our end.

  Thank you

  Durin

• Major display problem with Audition CS5.5 on Surface Pro 4 Tablet

  Hi people,

  I just got a new Microsoft Surface Pro 4 tablet, so I can edit on the go more easily than with my old laptop. I use Audition CS5.5, because I am a podcaster and radio producer, and it works wonderfully for these tasks. Unfortunately, when I installed hearing on this new tablet, I discovered a major compatibility issue. All text and buttons display so small that the program is essentially unusable.

  

  I tried to play with the display settings on the Surface, but they seem to have no effect on hearing. Even when I get the settings "change the size of the text, apps and other elements ' maximum, it has no effect on how the hearing poster (even if she handicap other programs).

  

  So I tried contacting Adobe via Facebook, and everything they said it was "Hi Chris, see if this article helps you to: . http://bit.LY/24jts28 "Thanks , ^ KM. Which I linked to an article from Microsoft. When I went through the troubleshooting process, however, he suggested 1) the same thing, I tried 2) communicating with Adobe or 3) buy the new version of the hearing.

  

  And earlier I tried calling technical support and they told me that they don't offer phone support for tablets.

  I am extremely frustrated. I love this piece of software and it would be ridiculous to pay a monthly subscription for the new version just change the display settings. Was Adobe really this careless with the design of this product, and they have now abandoned it? What can I do to solve this problem?

  Thanks for any help.

  -Chris

  Support should not consider the 4 Surface Pro tablet, from a support perspective, it's a PC.  I'm sorry to hear that you who were respected.

  Richard is correct, in CS5.5 we simply don't HiDPI screens on the piece of road, and you will probably find that's true with many Adobe applications since that time.

  In addition, as Richard has pointed out, in recent versions we did some work to support HiDPI screens as well as some of the capabilities of the touch Surface.  Here are two tweets I sent to a customer showing on my personal 3 Surface Pro:

  C Van Winkle on Twitter: "@DawsAngeles @duringleaves https://t.co/owizvYIbg0".

  C Van Winkle on Twitter: "@DawsAngeles @duringleaves https://t.co/Zw3NI41rMG".

• Audition CS5.5: Problems with playback

  I just can't get anything to play Audition CS5.5. I can do everything else at the hearing except play or save files. I just got a new Macbook, so my OS is OX 10.9.3. Someone knows how to fix this?

  Very well.  Then the next thing I would try is remove existing preferences of hearing and letting rebuild them from scratch, by asking id cool device from the BONE.

  1. open Finder and click on OK in the menu bar.  Hold the OPTION key and click library when it appears.

  2. go to Preferences > Adobe > Audition

  3 Rename the folder "4.0" to something else, like "4.0.BACKUP".

  4. start the hearing

  If this fails to make a difference, please let us know how the hearing was installed on this new system.  The contents of the hard disk have migrated or imported from another computer?

• Installed Firefox 3.6.10 now my mouse wheel does not scroll

  I just installed FF 3.6.10 update, and now my mouse wheel does not scroll. I checked my settings of the mouse, and everything is OK. Mouse wheel scrolls in applications non-Firefox, including offline and IE records online. The mouse wheel has worked well with the latest version of FF. Also tried to plug in a different mouse, (mechanical an old man to whom), same problem. If this cannot be corrected, how to uninstall the last update and revert to the previous version?

  Please read this article to see if it helps:

  https://support.Mozilla.com/en-us/KB/cannot+scroll+with+mouse+wheel+or+touchpad?s=cannot+scroll+with+mouse+wheel+or+touchpad+ & As = s

• scrolling problems, running of the depot, retro-typing and cursor and windows boxes freezing in the process of disappearance. Help!

  I have a dell vostro 1000 laptop with windows Vista Basic program. I aggravating problems with scrolling, on each program Web site. I have mozilla firefox, chrome, IE I started to scroll down a page and he yanks back the Summit. This also happens offline. I feel like a tug of war. The other problem is the flashing running drop boxes. When I go to lets say google and I click on the search box type it then starts flashing and hurtling previous search words. It is difficult to stop this. right now I have some difficulties to type this question because I'm going to type a few words and then the cursor disappears also a previous sentence. Sometimes when I go to type a word in the search type box the first letter and then the cursor will return to the leading space and adds the letters before the first letter of the word. I feel like sometimes I write backwards. Oh! time comsuming. It does also offline. I have a wireless keyboard and mouse that I sometimes use the mouse works, then suddenly, the page is pulled to the top and I can only It control a few times with the arrow keys on your laptop. Sometimes, this work and others do not. My AutoFill will in to fill out the forms but the name, the address box etc. will follow down the rest of the form and I do not see other issues. I tried Control Panel for mouse problems and the keyboard and settings sometimes move for the reason so I can't set some options. Can someone please help me I've been struggling with this problem for over a year.

  Hi Butterfly3,

  Welcome to Microsoft Vista answers Forum!

  ·         Does the problem occur even when working with other programs such as WordPad and Notepad?

  (A.) it can happen that if drivers are not updated, you may update the drivers for keyboard and mouse on your machine, see steps to update the drivers:

  (i.) click Start > type in Device Manager in the start search > expand the keyboard and the mouse in Device Manager > right click on drivers > click Properties > click on the driver tab > click on update drivers > click OK.

  Now, restart the computer and check if the keyboard and mouse works fine without any problems.

  (B) if the problem persists, you may need to perform the analysis antivirus on the computer.

  You can also perform a complete analysis of the Service from the link: http://safety.live.com

  A.) you can also check by reducing the hardware acceleration on your computer, follow the steps below to reduce hardware acceleration:

  (i.) click Start > click Control Panel > click on appearance and personalization > click personalization > click on display settings > click Advanced settings > click the Troubleshooting tab, and then click on change settings.

  Note: The settings will be disabled if the graphics card driver does not support disabling hardware acceleration.

  Move the hardware acceleration slider until it is one notch to the right of none. It is the basis of acceleration.

  Click OK twice, and then close the window.

  (B) I suggest that you might have to reset the internet settings explorer explore on your computer, download the Microsoft Fix - it of the link which automatically resets the default browser settings, see the link: http://support.microsoft.com/923737

  Hope this information is useful.
  Let me know if it worked.
  All the best!

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Lately when I use the mouse the words text scrolling and copy on top of itself a million times. This happens when I am on line reading something to say on the MSN homepage.

  Lately when I use the mouse the words text scrolling and copy on top of itself a million times. This happens when I am on line reading something to say on the MSN homepage. Sometimes I can click off on the side and separates the text and I can read it but when I use the scroll of the mouse or even the scroll bar on the sideit happens again and again.

  Hi Jaynebasye,

  1. This only happens when you are on the MSN Web site?

  2. did you of recent changes on the system?

  Method 1:

  You can try to change the scroll settings and check.

  For more information, see the following article

  Change the settings of the mouse

  Method 2:

  Step 1:

  You can also check if the problem occurs in safe mode with network.

  Startup options (including safe mode)

  Start your computer in safe mode

  Step 2:

  If you do not experience the problem in safe mode with network, then perform a clean boot.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: Make sure that you put the computer to a Normal startup once you are finished.

  Hope this information is useful.

• Use Microsoft Wireless Notebook Laser Mouse 7000. Horizontal scrolling does not work

  Original title: mouse scrolloing problem

  I just bought a Microsoft Wireless Notebook Laser Mouse 7000 and my scrolling does not work, is their a way to implement or to solve this problem?

  Hello

  1. the problem occurs on a particular application?

  I wish that you follow all the methods in this article to resolve the problem.
   
  The problems with the mouse button or scroll the parameters
  http://support.Microsoft.com/kb/303091

• Audition CS5.5 installer said that my serial number is not valid.

  I have my serial number CS5.5 but Audition CS5.5 installer says that it is not valid.

  I don't have the same problem with all other CS5.5 products.

  If the hearing is part of a Creative Suite license you have bought then it must be installed subsequently.  The serial number does not work for individual products.

• Pass an audition CS5.5 works don't not on 2014 MacBook Air

  Greetings!

  Just upgraded computers (on a 2008 MacBook) to a 2014 of MacBook Air (13, early 2014).  I had Audition CS5.5 on my old Mac, so I disabled it, installed on the new Air and activated.  Everything seemed to install smoothly, but when I open the program and open an audio file, it simply doesn't work, plain and simple.  I touched the game and nothing happens. I try with the space bar and nothing happens.  The play button lights up but nothing plays.  I can add effects to titles and see that changes are in the waveforms, but can not hear back.  Even after changing, I can't save these changes.

  The specifics:

  13 "MacBook Air (early 2014)

  1.4 GHz Intel Core i5

  DDR3 4 GB 1600 MHz

  Running OSX Yosemite (10.10.3, even my old MacBook with no problems)

  With respect to the hearing, it is CS5.5.  There do not appear to be updates available.  I know that I can go to CS6 and I have no problem to pay for upgrade, but it will only do it if I know for a fact that the issue will be resolved.  And honestly, unless there are updates that are earth-shattering, I'm perfectly happy with 5.5.

  So there.  Anyone has any ideas what could be the problem?  I did some research, but can't seem to find someone with I'm having exactly the problem.  Thanks in advance for any help you can provide!

  This means generally that the hearing cannot connect to the audio interface. You will need to check the settings in the Audio hardware / preferences of the hearing. You may also check the Mac audio and Midi to make sure that your audio interface is configured correctly. You have the correct audio drivers installed for your audio interface?

• Visual C++ runtime on audition cs5.5 win8.1 boot error

  After you have reinstalled Audition cs5.5, I get a runtime visual C++ to start error.  I've never had a problem before on a reinstall.  I tried uninstalling and reinstalling without success.  Is their a version of Visual C++, what is needed here?  Is this a compatibility problem with Win 8.1?  Does anyone else have this problem?  I got lucky in the FAQ section.

  The only questions I've ever heard talk involving this appear have been caused by the presence of too many versions of running on a machine. I'm not entirely sure of what is the situation with the software only works correctly with the version he was supposed to, but apparently clearing out older versions (you can check this and delete them if you want using the normal uninstall routine) has fixed this issue at least once. It is merit to be studied, anyway.

• Cannot hear sound on Adobe Audition CS5.5

  Hi all, I am having trouble with Adobe Audition CS5.5.

  The first time I ran it, it said that of the inputs and outputs audio frequencies were not the same, so the hearing could not save.

  I fixed that and I do not know I did because everything I try to save is saved in fact, the problem is that I can't control what I record (with the 'I' switch IT) and I can't hear anything when I try to play something I recorded. I don't know that my sound card works because I can hear all the sounds of windows and if I export an mp3 file with hearing and then I try to open it with windows, I can hear this medication I recorded... There is my system info:

  ASUS P8P67 PRO

  Intel i7 [email protected]

  8 GB DDR3 dual channel RAM@825MHz

  Realtek High Definition Audio Card with ALC892 Codec

  Can someone help me?

  Thank you, bye!

  EDIT:

  I forgot, my Audio hardware settings are the following:

  The default entry: entry line (Realtek High Definition Audio)

  Output by default: Realtek Digital Output (Realtek High Definition Audio)

  Master clock: output: Realtek Digital Output (Realtek High Definition Audio)

  Latency: 200ms

  Sampling freq: 44100 Hz

  Post edited by: Harlandraka94

  Harlandraka94 wrote:

  I don't know that my sound card works because I can hear all the sounds windows

  This is almost certainly the root of your problem. Whenever Windows plays a sound, it resets the audio device to its own ridiculous parameters and does not return them later. As it says in the installation instructions very clearly - turn Windows all sounds OFF firmly.

  You must then set the default rate for the audio device is the same as the rate you want to use in Audition, in the control panel of machine. This should not be necessary, but if you do not, you are still likely to end up with the resampling BONE your output and you really don't want to what is happening, because the operating system is crap at it.

  Record monitoring, it is something better left of your audio device using its loop mode (assuming he has a)-ideally do not by hearing, because you will end by with latency delays.

• Any idea on what Audition CS5.5 will be compatible with Mac OSX Lion

  Hello

  Any idea on what Audition CS5.5 will be compatible with Lion?

  Are they let us know through this forum or on the main product page?

  Thank you

  Please see this page:

  Known issues with Adobe on Mac OS 10.7 Lion products

  There is nothing specific to the hearing, just the stuff General as scroll direction and the library is hidden folder and so on.

  We tested the Lion drops as they were coming.

• Scrolling problem

  I have the scrolling problem in netbeans IDE in my macBook pro early 2015 (retina 13 inches), somewhere that is extremely fast cannot see what is happening and in a place more slowly scrolling and not able to fix by increase or decrease scrolling speed of the trackpad in

  sys.pref-> accessibility.

  Everyone please help.

• scrolling problem large bitmap image

  City previous forums:

  Comments: comments	scrolling problem large bitmap image Posted: Sep 28, 2007 14:47
  	I want to scroll through a large bitmap image.i have read previous threads.i have added a null field before bitmap field. But the big picture scrolls, but shows an arrow down. Please help me. Thanks in advance.

  wang0043 Messages: 12 Join date: September 2007 Re: image to large bitmap scrolling problem Posted the: October 1, 2007 03:35 I have the same problem. After testing different ways using the BitmapField, I just changed paint the bitmap on the screen instead. More write the paint method and use drawbitmap to draw the bitmap to the screen. Track action wheelball to paint the bitmap can achieve the effect of view.

  Comments Re: image to large bitmap scrolling problem Posted the: 3 October 2007 18:10 Can you guys post the code on how it's done? Thank you

  Comments: vicky Re: image to large bitmap scrolling problem Posted the: July 19, 2008 02:33 Hello I get the same scrolling image problem. Can you please suggest some way thanx

  What kind of manager added the BitmapField to?  The support of the Manager there vertical or horizontal scrolling style defined?

  Here is an example of code that I use to show how to scroll through a screen image:

  Scrolling Image recipe

  The image of "test.png" is in the same folder as the source of java if you want to download that as well.