move a vector point
Hello
I just put myself in illlustrator car I found sketch a bit limited but index seemed more simple...
My question is: I create point by point a vector. Once finished I would simply move one of the points of this vector. Which tool to use for this
Thank you
Kim,
The direct Selection tool. Deselect the object first, if selected; You can do this by clicking on a blank spot on the plan of work/work area.
Tags: Illustrator
Similar Questions
-
When I use the selection tool to move vector points and fold the edges, I see that the change in metal frame. Once I commit by letting go of the mouse button, the object changes. It presents a preview just with a wire frame. I would like to see the preview to change on the solid object. Is there a setting somewhere?
I really hope I'm explaining this to people to understand .
Thank you
Ed
Hi Ed,
You use a previous version of Flash Pro that displays this behavior.
Live the overview of forms while editing got added in Flash Pro CC (and above). You can try the latest version of Flash Pro (CC 2014) see how it works.
-
direct selection - move the anchor points with the arrow keys of the keyboard
Hello
I use Illustrator CC. I just use the image tracking tool to create a version vector of my company logo. It worked pretty well, but now I'm just trying to clean it up a bit. I have a few anchor points that I want to just push upwards or downwards into the smallest possible increment.
I think it would be easier for me to do using the arrow keys on the keyboard instead of the mouse, but the arrows cause my selected anchor point to jump in too large a distance way. I checked to make sure that the bearings commented, snap to grid and snap to Point are all extinct. I don't see anything else to do.
Can someone tell me which control how the keyboard arrow keys will move an anchor point, and how can I fix this to the smallest possible distance?
Thanks in advance,
PaulGeneral Prefs, area keyboard Increments. Have something you need.
Then use Nudge (up, down, left, right arrow).
-
HOW TO MOVE THE FLAG POINT MAP, MIRCOSOFT 2013
HOW TO MOVE THE FLAG POINT MAP, MIRCOSOFT 2013
Hello
It is not a Community Forum for MapPoint.
Ask here
Highway, Streets & Trips, MapPoint Forum:
http://social.Microsoft.com/forums/en-us/streetsandtrips/threadsOther Support options (not free)
Support for MapPoint, streets & trips and Highway:
http://support.Microsoft.com/ph/851Don
-
How can I move two anchor points overlapping of distinct objects at the same time?
Please refer to the picture for clarification:
Pink and blue objects in the image are distinct forms that have the same number of vertices/inkings. The forms have been generated with ArcGIS and exported to a. File to HAVE it. I need to move the anchor points of these two forms, so that they create a trail that follows the outline of the layer of the topography, but it seems that I can only move the anchor of a shape at the same time. Is there a way to pass the two anchors both (anchors that overlap, one of each shape)?
I should also add and subtract some of the anchor so while making it so each anchor is not a 'corner '.
I want to essentially merge or merge the anchor points of the two forms while maintaining the two colors, so that they share a border.
Any help will be a life saver! I can try to clarify if it is not supposed. Thanks in advance!
-Jake
Jake,
You can click on selection of object through only in preferences, then after the first deselect all ClickDrag (click outside paths) with the tool directly on each game Selection and then ClickDrag to move (you can simply go to set).
-
How to move the insertion point from editText ScriptUI?
Hello.
How to move the insertion point from editText ScriptUI?
Please tell me the JS code.
Thank you.
I don't think you can. You can control the selection of text in an editText widget, but not the position of the insertion point.
-
How we move the top point of the triangle down without shift 2 low points!
Hello
I'm doing my own logo... (trial and error)... and the need to move the top point of the triangle down without the 2 basis points on the way down! Have been to him for a long time but the basis of 2 points to continue moving down for.
It's actually a small square with a triangle roof - House, but the roof is too high. Very simple things, but the basic points is still moving down!
Would like to know how to do it!
Thank you!
Tania (U.K)
If still in trouble, download a screen shot of your form with all points of view. How did you produce the form? You could either use the polygon tool with set on 3 sides, or a more convoluted process, is to use the pen tool to draw the shape. Then with the resultant Workpath selected in the Trace Panel, go layer > fill new layer > solid color. This produces a new layer of the shape of your workpath.
-
I can't move the anchor points on a shape, I've drawn with the pen tool. There are also small circles with a point in them (think focus), who they are and they are part of my problem? If I open a new document and draw randomly everything is good, no anchor and focus points behave.
Bubble icons are the widgets corner. You can drag inward to round the corner. They are not part of your problem. If you want to hide them, select view > hide corner Widget. I have a hotkey defined for this menu item.
If you see multiple bullseyes, you may have your set with the shape selected, that would prevent you from being able to move individual anchor points. Deselect the shape first, and then move the anchor with the direct Selection tool.
-
What does it mean when the Selection tool in illustrator has a small white box or black next to the pointer? I did a clipping of an object mask and now can't move and selection pointer has small box beside him. Yet to learn...
When it is over an unselected path or shape (as in, something that you can select if you click right here), it shows a black box. When you're not selected anchor, it shows a white box.
-
Tecra S1: Move the mouse pointer
From time to time my mouse pointer moves slowly upward or sideways. This happens once anchored and when not docked. In the latter case, I have an external mouse not attached.
This problem is really annoying, especially when you try to hit a box for example.
Any ideas?
See you soon
seasack
Hi seasack
If you use the pointer internal (the stick between GH and B), it is very common that the ca of pointer starts to move.
The reason is a bit technical but very understandable.
The mouse pointer works like a small joystick. Means that it is that you push forward, down, sideways and so on. However, please check the HOUSE or 0-position from time to time. When you're not, this would be a normal position of the HOUSE for us but it doesn't.
It is therefore possible that it may be wrong to believe that the position of the HOUSE is when you push forward.
If you stand and do not change the position of the needle for (I think) 2 separate controls the position of the HOUSE, this position will then be the new post HOME until the next time he finds another.
Actual cases is not that extreme, of course, but more normal cases are that you bend your finger on the pointer when for example reading something on the screen. The pointer can recognize as a small boost, and if you do go, then he could have a new position of the HOUSE and start to drift or it could be "heavy" feeling in a certain direction.
The solution? Simple! Leave it on for about 5 seconds and it will go away.If you have this problem, even if your not even using the pointer, then I guess you have a hardware problem.
Try disabling the internal mouse by pressing FN + F9.Good luck
Tom
-
Screen moves when I point the mouse, like opening an email
Relatively new desktop IMac, Yosemite. I use a mouse when I point the cursor on any line, the line moves suddenly. It sometimes takes a few tries to succeed, because it moves (move a line or so away). He did this, since I got it and seems to be deteriorating, or I'm more tired of it. Any ideas? Thank you.
Looks like you have perhaps inadvertently zoomed in the screen. Try typing the command-option-8 to toggle the zoom.
You can find the zoom settings in the preferences system-> accessibility
-
move the data points on the waveform display
Hello
No idea why the waveform display to my VI has shift the data points? The third tab of the screen does not display this problem. I took a video of what happens to better illustrate what I'm talking about and attached my VI to identify the problem.
I am currently a sample of data from a DAQmx and storing in a queue until data backup button. Everything works well, but the problem is the display of actual data, which, although sense points, it shows move in a small area around where they are drawn in the first place. It happens even when I erase the visible data and restart the collection of data, as shown in the video.
Thanks for any help you may be able to provide.
Guy
The amount of data you draw? If you draw a lot more datapoints that there are pixels on the x-axis of the graph, you can get peaks that appear to move because of graphic interpolation LabVIEW has to do.
Mike...
-
Why when I try to move an object / point won't he go where I want it?
When I paint with the pen tool & to move a point, he won't let me move to another area (not where I want to). I do not have snap to grid in order to understand why?
Check the transformation Panel if "snap to grid of pixels" is enabled. If it is: turn off the power.
-
How to change the alignment of the existing "Movie Clip" symbol Point?
Hi all
by: Adobe Flash Professional CS6
My Flash program contains a 'Symbol' MovieClip and then to the breast of this "Movie Clip" there are 3 layers, which are about 6-7 long chassis.
Right now is size of video Clip "1680 x 1050" and it is centered on the stage. But the registration point is in a strange situation. It seems
as it is biased a bit and to the right.
I was wondering if there was a way to change the point of alignment in the same way as when you create the symbol (* that is when it shows you the )
points of type "grid" which you click on one of them and it becomes its registration point)? I read about how you can change the registration Point of
by clicking on the Clip and then clicking on Edit > Edit Selected/symbol/In_Place. But when I try that it's really hard to get where I want it to be...
What I want is the upper-left corner of the symbol for the registration Point, which is the top-left corner is "0,0"
Anyway I can do without having to "Hands-free" move image to the Point of alignment... ?
Any ideas/suggestions would be greatly appreciated!
Thanks in advance,
Matt
You can always create another movieclip that you (select the mc and choose create MovieClip) and when you specify the upper left corner to be the alignment point.
-
Can I move the anchor Point for the adjustment brush in ACR CS5
There has never been a problem before, but the anchor point for the adjustment in ACR brush is sitting exactly where I need to see what is happening. I can delete and start over, but if there is a way to move or hide the anchor in stil be able to adjust the setting, it would be useful to know for the next time it happens.
You can press the V key to toggle the power switch pins.
Maybe you are looking for
-
I click on my plug-in update, he said: I need to update java I update java, but when I go back to plugin it still says that I have to update. I've updated several times and get the same result, what I am doing wrong? I know that I have the right vers
-
Tecra A10 - 12Z BIOS 1.6 wanted to move to 3, but 'not supported' - W7H32
There are many problems with this Tecra A10. As Windows Xp is disabled, I tried Windows 7, which is too awkward, so I wanted to try the eSATA operating systems. Although I could install Lubuntu on eSATA it would not start (no hard drive inside most)
-
Satellite M30 - user not allowed to update the BIOS
I have a Satellite M30 (204, according to me, model 60 GB 1.6 GHz) and I try to update the BIOS but get the error message the "the user is not allowed to update the bios. The reason why I'm trying to update it is I just bought a 250 GB hard drive, bu
-
OfficeJet Pro 8600: questions printerhead
I suddenly got a message on my printer screen: "there is a problem with the ink system. Turn the printer off then on (I also unplugged it, but which did not help). If it persists, call HP. "It did not work, so the next step was to remove the printerh
-
Aspire XC100 - increase graphics ram?
Type of display graphics AMD Radeon HD 7310875 MB total available graphics memory256 MB dedicated graphics memory0 MB dedicated system memory619 MB shared system memory8.981.0.0 display adapter driver versionResolution of the primary monitor 1440 x 9