move the backup of the plant to another drive

Similar Questions

• How can I move the OS to another drive.

  I have a HP Pavilion Elite HPE with Win7 Pro as my OS and a single 1 TB HD.  Is it possible to move my C and D partitions to a smaller drive?  If so, how do I.  (I realize I have to buy another drive... (LOL).

  Thanks in advance for any help/suggestions.

  C   ;-)

  cindy906 wrote: I have a HP Pavilion Elite HPE with Win7 Pro as my OS and a single 1 TB HD.  Is it possible to move my C and D partitions to a smaller drive?  If so, how do I.  (I realize I have to buy another drive... (LOL).

  Thanks in advance for any help/suggestions, C ;-)

  Hello cindy906, you should be able to add a smaller hard drive to your system and use the restore disks HP recovery that you should already have, while leaving the current hard drive installed.

  There is a question that you would need to know. If you leave the current hard drive cables connected and use the Recovey HP restore to reimage the new hard drive, when you start the installation of the Windows operating system, the installation program (System partition) can be changed on the current hard drive. If you install Windows7 SP1, the Boot Manager will be changed and make the current version no longer starts.

  Windows 7 creates a configuration (System) partition when it installs hidden. When there is already a system on a system partition, Windows 7 will be find and replace it with the new OS when you update to Windows 7 SP1.

  Once the new disk has been reimagee with the game to restore HP Recovery disks, and the operating system has been installed, you can then reconnect the cables on the current hard drive and use it as a backup drive or delete it if you prefer.

  You would not be able to move the current hard disk to another system, for legal reasons and problems of compatibility with the already installed drivers for the HP computer, unless you formatted the hard drive and deleted the C: and D: partitions and the hidden partition of 100 MB.

  If all three partitions are formatted, the reader could be wiped clean and could be used on another system.

• Move the system on another drive partition.

  I have 4 hard drives on my Windows 7 system.  Readers 1 & 2 are defined in a RAID 1 configuration (labeled Disk 0 disk c).  Disc 3 (labeled Disk 1 drive F :) is were the 100 MB Partition reserved system resides.)  This drive has the SMART errors.  How can I move the system reserved on a healthy disk partition?

  Hello

  Thanks for posting your question in the Microsoft community

  After the description of the question, I understand that you want to move the different system for the drive partition. I'll be happy to help you on this question.

  1. What is the accurate and complete error message you get?
  2. What is the letter of the drive for this partition not formatted?

  Let us try the following steps.

  If the 100MB partition not formatted the disk '1' before the C: drive, follow the below mentioned steps.
  a. create a repair disk.
  Create a system repair disc:
  http://Windows.Microsoft.com/en-in/Windows7/create-a-system-repair-disc

  b. create a new simple partition.

  c. assign a drive letter (ex: 'Z').

  d. copy a folder and two files to the system partition reserved current (drive '0')

  Boot

  Bootmgr

  BOOTSECT. BAK

  e. remove the drive letter of the partition 'System Reserved' old ('0' drive)

  f. mark the new "System Reserved" boot partition as "Active".

  g. restart the computer and check if his boot to the desktop.

  h. If the computer does not start, then using the disk repair repair startup.
  Startup Repair: frequently asked questions:
  http://Windows.Microsoft.com/en-in/Windows7/Startup-Repair-frequently-asked-questions

  i. If able to boot to the desktop successfully, remove the old "System Reserved" partition ('0' by car)

  After trying the steps above suggested, giving us the results.

• I want to cut out spaces (bottom) of a ramp, so when I move the ramp to another location, you will be able to see through the cutting of the spaces and see the new view behind the railing

  I want to cut out spaces (bottom) of a ramp, so when I move the ramp to another location, you will be able to see through the cutting of the spaces and see the new view behind the railing

  marvwfactor

  What version of Premiere Elements and on what operating system works - it?

  Video or?

  Waiting for more information, you can apply ChromaKey (an effect of overlay of the effects of the program) to convert the solid color background areas in transparency. The success will depend on the nature of the solid color and how his strong colorrelates to the rest of the colors in the image.

  Please review and consider and provide more information, so that we can give you an answer with substance.

  Thank you.

  RTA

• Is it possible to move the files to another user in Vista?

  so I was wondering if I can move all my files and applications on another user? is it possible or not?

  Hi andylam123,

  Yes, you can move your files and settings to a different user account.

  Refer to this article for more details:

  Difficulty of a corrupted user profile

  Note: Ignore the title of the article. You can follow the procedure to copy the files successfully.

• How can I move a few photos of the catalog to another drive?

  I use the SSD as my photo viewer is almost full. I plan to buy another drive (a larger HARD drive) to the inactive photos I access regularly.

  Once I have move folders with these photos to this other player, how can I say Lightroom where to find them?

  In addition, this record will be most of the time. I do a lot of audio recording and need a quiet work environment. Will this be a problem? I guess that LR will show just a '? ' or something beside the photos/folders that are stored on this drive, when it is off? I would only the disk when I need to access these photos, which is rarely.

  Step 1. In your operating system, COPY (and not move) the photos on the new disk

  Step 2. In Lightroom, point Lightroom to the new location by double-clicking on the folder name and select the location of the folder to update

  Step 3. Once you are sure that step 2 has worked properly, then you can remove the phothos in the original drive with your operating system to 100%

  More deteails and pictures in part 2 of this document: Adobe Lightroom - find folders and files moved or missing

• Requests for comment move the cc on another partition?

  Hello everyone,

  I would have liked to move all of the cc to partition applications another.

  At installation, the program allows me at any time to indicate another partition or another disc, on which I would like to install the software.

  4 cc applications take me more than 3 GB on the partition dedicated to the operating system (SSD drive) and lacking space.

  Thanks in advance for any proposal and soon

  Germain Delsart

  Hi, Germain,.

  I think you want to change the installation location of the CC apps.

  Please launch the desktop creative cloud application > click the gear on the top icon right > select preferences > under the creative cloud section, you can specify the installation location.

  Reference: installation directory change request

  Kind regards

  Sheena

• Move the group to another group

  Hi all

  Can help to create a script to move the group named "Shine" in another group named "shine everything."

  Thanks in advance.

  Snapshot show for a better understanding.

  

  Does that help?

  // move groups of a certain name into group of a certain name;
  // 2015, use it at your own risk;
  #target "photoshop-70.032"
  if (app.documents.length > 0) {
  var myDocument = app.activeDocument;
  var name1 = "Shine";
  var targetName = "Shine All";
  var targetGroup = layersWithName (targetName);
  // if exactly one group qualifies;
  if (targetGroup.length == 1) {
  // collect groups;
  var theGroups = layersWithName(name1);
  // process groups;
  for (var m = theGroups.length - 1; m >= 0; m--) {
    moveTo(theGroups[m][1], targetGroup[0][1]);
    };
  }
  else {alert ("too many or too few groups called »"+targetName+"«")}
  };
  ////////////////////////////////////
  function layersWithName (thisName) {
  // the file;
  var myDocument = app.activeDocument;
  // get number of layers;
  var ref = new ActionReference();
  ref.putEnumerated( charIDToTypeID("Dcmn"), charIDToTypeID("Ordn"), charIDToTypeID("Trgt") );
  var applicationDesc = executeActionGet(ref);
  var theNumber = applicationDesc.getInteger(stringIDToTypeID("numberOfLayers"));
  // process the layers;
  var theLayers = new Array;
  for (var m = 0; m <= theNumber; m++) {
  try {
  var ref = new ActionReference();
  ref.putIndex( charIDToTypeID( "Lyr " ), m);
  var layerDesc = executeActionGet(ref);
  var layerSet = typeIDToStringID(layerDesc.getEnumerationValue(stringIDToTypeID("layerSection")));
  var isBackground = layerDesc.getBoolean(stringIDToTypeID("background"));
  // if not layer group collect values;
  if (layerSet != "layerSectionEnd" /*&& layerSet != "layerSectionStart"*/ && isBackground != true) {
  var theName = layerDesc.getString(stringIDToTypeID('name'));
  var theID = layerDesc.getInteger(stringIDToTypeID('layerID'));
  if (theName == thisName) {
  theLayers.push([theName, theID)
  }
  };
  }
  catch (e) {};
  };
  return (theLayers)
  };
  ////// move //////
  function moveTo (theLayer, theGroup) {
  // get index;
  var ref = new ActionReference();
  ref.putIdentifier( charIDToTypeID( "Lyr " ), theGroup - 1);
  var layerDesc = executeActionGet(ref);
  var theIndex = layerDesc.getInteger(stringIDToTypeID("itemIndex"));
  // =======================================================
  var idmove = charIDToTypeID( "move" );
      var desc5 = new ActionDescriptor();
      var idnull = charIDToTypeID( "null" );
          var ref4 = new ActionReference();
          var idLyr = charIDToTypeID( "Lyr " );
          ref4.putIdentifier( idLyr, theLayer );
      desc5.putReference( idnull, ref4 );
      var idT = charIDToTypeID( "T  " );
          var ref5 = new ActionReference();
          var idLyr = charIDToTypeID( "Lyr " );
          ref5.putIndex( idLyr, theIndex );
      desc5.putReference( idT, ref5 );
      var idAdjs = charIDToTypeID( "Adjs" );
      desc5.putBoolean( idAdjs, false );
      var idVrsn = charIDToTypeID( "Vrsn" );
      desc5.putInteger( idVrsn, 5 );
  executeAction( idmove, desc5, DialogModes.NO );
  };
  

  under the direction

• When I copy the files to another drive I lose sight that I put in place

  I have a folder of music with MP3s set up for show, track, year, artist, Album name, duration, and then sorted by Album title and show in groups.

  When I try to copy these files to a different drive (such as a backup copy), they lose that point of view I have Setup and it wou; d take me a long toime to reset the points of view for all folders is not good.

  Hello

  When copy you it to another drive, it will take the default order of windows.

  For reference:

  http://support.Microsoft.com/kb/306554

  http://support.Microsoft.com/kb/812003

  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756 /) how to back up and restore the registry in Windows

• Can I change the operating with another drive, and then use the recovery CD to restore my operating system on the new drive?

  I have 2 hard drives. I want to replace the smallest disk, which can be found be the operating drive. If I removed and installed another drive and used the recovery CD the I bought with the computer, I'll be able to re - install new hard disk?

  Hello

  Yes, you can change the hard drive and reinstall Vista using recovery disks.

  You may or may not have problems of reactivation.

  If you do, use the telephone option and hold firmly explain to a real person in the situation.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• How to change the location of the CACHE to another drive

  Cache of my Bridge is located on my C drive, which is almost full.  I would like to change the location of the cache on the D drive, which is also a hard drive internal, but with plenty of available space.  Unfortunately, when I go to preferences and click on the 'Choose' button for the location of the cache, it only shows me my C drive.  I'm 99% sure that I initially installed all of the creative cloud on my C drive, but then uninstalled and reinstalled on my D drive (because of space reasons).  It seems that if the application resides on drive D, but all the remains of data of the app on the C drive.

  Is there anyway to access the D drive for the cache?

  Is there anyway to move the app on my D drive data files?

  Thank you

  Paul

  It's weird.

  I would try the following as a workaround.

  First make a folder on your drive D as D:\Bridge Cache.

  Then place a shortcut to this folder on your desktop.

  Maybe that way you can access this folder.

  You can delete the shortcut later.

  I tried on my computer and it worked...

• I would like to move my programs of elements to one another drive can be done?

  My boot drive is very small and I store most of the things on my external hard drive. When I bought Photoshop elements 14 online that it installed on my boot drive as done organizing. My boot disk prevents fill. When I bought the first 14 elements I installed it on my external hard drive. It works very well. How can I move the application on the external drive. I use a MAC book.

  Uninstall from your c drive.

  get back on your external drive.

  to migrate your catalog, move organizing items catalogue by using the backup and restore

• Move the data to another file system file - affects on the day before in a DG?

  If I want to move a file of data to another file system, because the current file system is full, I'd take the tablespace offline and unix, copy the data file to the new location and rename the tablespace to the new location.
  
  How would behave the night before in a dataguard environment? The DOF would apply, but could I take a tablespace offline space, waiting for read-only copy the data file on the unix sleep?

  Hello;

  I think that this would be ' rename a Datafile in the primary Database.

  If you don't rename the data corresponding to the watch system and then attempt to refresh the database backup control file, the standby database will attempt to use the data file renamed, but it will not enter into it. (the change is not propagated to the database pending)

  See Section 8.3.4 rename a data file in the primary database in the Document Oracle B14239-05 (Oracle10)

  This is a step by step on how to handle this.

  OR

  Chapter 9.3.4 rename a data file in the primary database in Oracle Document E10700-02 (Oracle 11)

  Best regards

  mseberg

  Published by: mseberg on December 1st, 2011 09:15

• How to move the VM to another storage without Virtual Center

  Hello-

  I read some other posts on the moving a virtual computer to another storage without Virtual Center and there is a good post, but I have different problems, because my situation is a little different.

  My VC is currently stored on a local storage of the ESX servers.  It is the virtual machine that I want to move to a shared storage.

  You guys can help me with some of the steps I can take to move this shared storage better?

  I'm not too familiar with Linux, so even copy files etc, I'm not sure how to do it.

  TIA!

  Luke

  You are welcome!

  Now you can help us.  Please consider awarding points for 'useful' or 'right' answers

• How do I move the dashboard to another space?

  I recently got a new iMac, and after the migration from a Time Machine backup, my widgets now have their own space.  On my Mac Pro widgets open in every space, and I want to make it work this way again.  But it is not possible to remove the space from the dashboard (not), and I can't find a way to change the dashboard to work in each space (there is no popup Options that I can see).  I want widgets to pop up on the current screen what he can be, so I can see what's behind the widgets.  For example, if I appear a calculator and see a list of numbers in a document at the same time.  I don't WANT widgets in their own space with just a white background.  How can I do?  Or is - it is no longer possible with El Capitan?

  Go to system-> Mission control preferences and set the dashboard for "like"recovery."