Similar Questions

• I get the 0x8078012D error code when I run the Windows backup on an external hard drive.

  I get the 0x8078012D error code when I run the Windows backup on an external hard drive.  I have Windows 7 Professional.  That suggests this error code is the problem and how can I solve the problem?

  For people who read this thread, I offer the following information.  I solved the problem by noticing that the problem could have been caused, when the system image is created.  So I did a backup without creating the system image and backup is complete without error.

  Then I used the backup program to create a system image.  This time error (0x8007045D) was displayed.   The error report says "the operation failed for a device error encountered with the source or the destination. If the volume of the source or the destination is on a disk, run CHKDSK /R on the source volume or destination and then try again using. »

  So I ran chkdsk/r, and this program is a bad sector on the hard drive of my computer and fixed the error.  It took about an hour to run the program.  Now, the image of the system and the backup of data file work again.

  So I think that the main cause of error (0x8078012D) is deborahgarbe of i/o error (0x8007045D).  So if you get the first error code you can search for fixes for the second error code fix the root cause.

• compatibility issue between the windows operating system 7 and NERO 7 ultra edition

  y at - it an easy way to make NERO 7 compatible with windows 7

  Thank you

  I took a glance at the website of the company Nero. It seems that Nero 7 is compatible with Windows until Vista operating systems. Here's what the company says about Windows 7 and Nero 7.

  You may need to upgrade to a newer version of Nero.

• Restore the data to backup the Windows XP system files

  I have a backup of the Windows XP system to an external drive.  I need to restore my data from this external hard drive files only.  I don't have an XP machine.  Ideally, I would like to restore my data files on a Windows 7 computer and save them to the external drive. Is this possible?  If so, simple step by step instructions can be provided.  Thank you.

  Hi Denise_898,

  1. How were you running the backup of files on Windows XP?

  2. what program did you use to backup files in Windows XP?

  If you use the ntbackup utility available in Windows XP, you use NT Backup Restore Utility for Windows 7.

  Restore description of the backup of Windows NT to Windows 7 and Windows Server 2008 R2

  http://support.Microsoft.com/kb/974674

  How to use the backup utility to back up files and folders in Windows XP Home Edition

  http://support.Microsoft.com/kb/308422

• I am a user of Picasa for a long time conversion to Lightroom.  I share photos with dropbox on a MAC, a Windows computers, storing images and the catalog in dropbox.  I'm able to share the LR catalog, but on the second system images can be found as s

  I am a user of Picasa for a long time conversion to Lightroom. I share photos with dropbox on a MAC, a Windows computers, storing images and the catalog in dropbox. I'm able to share the LR catalog, but on the second system images can be found as a prefix system DB files have different user names. Any ideas?

  At the point of Lightroom to another location for photos, follow these instructions:

  http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm

  Note: If the catalog is constantly being synchronized to DropBox, you will most likely follow these instructions whenever you open the catalog on another computer.

• How to make a backup of the Windows BACKUP DELL?

  I have a Dell 0ptiplex 3010 with windows 7 pro 32 bit 10 units.
  How to make a backup of the Windows BACKUP DELL?
  Please help, I'm still confused with BACKUP DELL.

  Hi rahar_satriyo,

  Only the version complete Dell backup and restore will give you an option to backup computer image which is a paid version. The default Basic that comes with the system version will have only the restore factory in image.

• WD external drive is not detected by the Windows backup program

  Original title: with a WD external drive backup program

  I have a WD My Book Essential 320 GB external drive. The Windows backup program does not recognize the drive... The drive IS recognized on my computer and I can access and transfer and copy and paste to it without problem. It's just the backup program which does not. No error message or anything. Only, it does not recognize the drive when I get to the destination area. I tried to update the drivers. The WD support site has Backup downloads for OTHER external drives, but not this one. Their Web site says to contact Microsoft support. Any suggestions?

  Hey mrlray,

  Here's what you can do.

  Perform the clean boot

  Backup process a lot sometimes, this problem is provided by third party in conflict with windows software. See if this is the case here by putting your boot system before you perform the backup.

  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  Note: Ensure that return you the computer to a normal startup mode after you have completed troubleshooting.

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• The service cannot be started, either because it is disabled or because it has no enabled devices is associated to him. (0 x 80070422) attempt to run the Windows backup utility.

  I get this message every time I try to run the Windows backup utility.  All the services are rundning according to the instructions of Microsoft experts on the same issue.

  Original title: the service cannot be started, either because it is disabled or because it has no enabled devices is associated to him. (0 x 80070422)

  Hi Charles,

  Welcome to the community Microsoft and thanks for posting the question. I'll certainly try and help you perform the backup.

  Until we start could you give us some more information?

  1. Since when are you facing the issue?

  2. you have any anti-virus installed on the computer program?

  3. What are the troubleshooting steps correct you have taken to correct the problem?

  4. are you aware of any changes made to the computer before the show?

  I suggest you to re check the service as long as this error usually occurs if one of the services required for the backup Windows for work is disabled or has not started.

  To check the services, click Start, in the Start Search bar type services , and then press enter.

  Please check that the following services are enabled:

  -"Remote Procedure Call" (RPCSS) must be active, Automatic.

  'COM + Event System"(System events) must beactivated en, Manuel.

  -'System Event Notification Service"(SENSE) must be active, Automatic.

  -"Volume Shadow Copy" (VSS) must beactivated en, Manuel.

  'Microsoft Software Shadow Copy provider' (SWPRV) must beactivated en, Manuel.

  Once you make changes according to the above specifications, you can try a backup and check to see if that solves the problem.

  I also suggest you to run a SFC scan (System File Checker). This will replace the corrupted Windows files.

  Here are a few articles on Windows backup.

  http://Windows.Microsoft.com/en-us/Windows7/back-up-your-files

  http://Windows.Microsoft.com/en-us/Windows7/back-up-and-restore-frequently-asked-questions

  Hope this information was helpful and let us know if you need assistance in the future. We will be happy to help you.

• Disable the windows backup utility

  How can I disable the windows backup program?  I could not make a backup by using the utility for running Windows Vista.  Problem since upgrade to Windows 7.  The program continues at the prompt for a DVD and I would rather just turn off.

  Valerie

  Reference: http://www.sevenforums.com/tutorials/618-backup-files-schedule-turn-off.html

  You could also disable the backup services service

  Start > service.msc > Windows backup > stop the service.

  See you soon! "That's all a pension chequer nights and days,"
  Where destiny with men for pieces plays;
  Here and there, mates and kills.

  In a world without walls and fences, who needs windows and doors? Life sucks! Getting used to!

• The create a System Image will save the FPGA code and the RT code?

  I have some cRIO systems which were broadcast in our manufacturing plant for some time. A slight problem has been discovered in the programming and created a workaround solution, but a fix should be implemented. Currently, I have no way to test my new code without loading on the cRIO and it works on the tool while the product is running. If there is a problem and I need to do some debugging, the tool cannot be down for an extended period. I would write a vi that will save an image of the cRIO so I can reload the software that is currently running and prevent a situation of prolonged downtime.

  My question is, when I did in the past with a product that has different tests, calibration and the final client software RT, it seems that the code FPGA not be saved (not a big deal at the time since the new FPGA code was compatible with different deployments RT). The new FPGA code won't be compatible with the old RT software, so now I'm worried. I would like to just check on it until I have all the boss breathing down my neck. If the service will not save the bitfile FPGA, is there anything else I can do for the tool to return to the previous running state while I solved problems that may exist with the new code review? The original code was lost by my predecessor. Otherwise, I would use just that.

  Hi Jeremy,.

  You are right, because the create a System Image does not record the bitfile with the image of the RT. Using the configuration system API, you will need to deploy the RT image and then the bitfile FPGA compiled later. To ensure that you can return to the previous version of the software running on your RIOs, you could simply save the current image and bitfile before deploying the new image and bitfile.

  However, the best way to proceed is to use replication Deployment Utility (RAD of OR). I have provided the link to the tutorial on the wheel, where you can download the utility. This exe will make images of the any of your RT targets and will also include the bitfiles with them. You can also deploy these images to several targets at once. In particular, you can read about the Bitfile (s) configure for FPGA Deployment Flash; the bitfile will be deployed at the start when stored in flash memory.

  Replication and deployment (RAD) utility-

  http://www.NI.com/example/30986/en/

• Dell has developed a passwoord and cannot access the Windows XP system on a network share in Windows 7.

  Original title: network router, XP computer and Windows 7 laptop computer dilemma.

  My system XP computer is part of a network using a router. I also have a laptop Windows 7, using the same network. Reference Dell set up a password so that the network is not accessible without password, reducing the risk of piracy. Now, I can not in the XP system because of the defined password.  How to reset or enter the password on the XP computer?

  Hi Scottid2,

  1. do you receive error messages when you access the Windows XP system?

  2. What is the password being set by Dell?

  You can check in the Windows 7 system if the password protected sharing is enabled. When protected by password sharing is enabled, people using other computers on your network cannot access your shared folders or printers unless they have a user account on your computer.

  You can turn off password protected sharing and check if it helps.

  For more information, see the articles:

  Why can't I connect to other computers?

  Networking of computers running different versions of Windows

  As the password is set by Dell, you can also consult with support of Dell for the same thing:

  Dell support

• Partition of WINDOWS 7 system utility and reserved "hidden" image

  I used the WIN 7 system image utility before, but I must admit it took several attempts to work around the problem of the score of "shadow".  Nevertheless, I had done, but did not write the procedure.  I want to create an updated image.  The dialog box indicating that the image was created successfully appears.

  Not being not confident of WINDOWS, I took blank hard drives & restored the image & it wouldn't boot.  I got was a flashing 'MISSING OPERATING SYSTEM '.  I've booted from WIN 7 DVD & entered the prompt command & reviewed directories of the restored image & the \WINDOWS\system32 directory exist.
  I don't remember this before, but I need to assign a drive letter to the partition of "shadow" & what to include in the picture as well?  I thought that the content of this partition automatically copied imaging utility & created a new partition of shadow on the readers that the image is restored.  Am I incorrect?
  The f

  I guess I solved my issue. I did not include this player in the exploitation of the IMAGE & assign letter of the score of "shadow". I restored the image successfully. I presumed that the startup config info would be ddinterrogated & copied by DEFAULT. I guess I guess THAT too.

  The f

• How I can scan the registry valuHi, how I can scan the Windows 7 registry value and how do I come to know if the registry value is same as it has been installed previously?

  Hello

  How can I scan the Windows 7 registry value and how do I come to know if the registry value is same as it has been installed previously?

  Hello
   
  The Windows registry is a vast and vital part of the computer, which continues to evolve being modified or deleted or new entries are created all the time.
   
  Case where the registry keys of change.
   
  At startup
   
  So that updates
   
  While making customization or custom settings in windows
   
  While to install the software
  Virus... etc.
   
   
  Each click Open and save is related to the registry.
   
  This is something very tedous to verify the integrity of a registry of windows with all of the above modifications being carried out.
   
  You can back up the registry of the computer after you install Windows new and update with all Windows updates and the custom software, into a registry backup or create a system image / restore point.
   
  Please visit these links for more information.

  Windows registry Description of the audit of the Windows Registry tool (Scanreg.exe) How do I add, edit or delete subkeys in registry and values by using a registration entries (.reg) file Hope this information helps

   
   
   

• Drive recovery system image and error 0 x 80070017

  Hello

  I have a new laptop Sony Vaio 15 did run Windows 8.  The only thing installed since the English language pack (it's a portable Japanese), as well as the updates of Windows of ~ 45 that are currently available.  He is running Trend Micro Security Center (I have initially well could hold a part of progress with my image system recovery disc).

  I tried to use the recovery of files of Windows 7 system to create a system image.  However, I keep getting the error message "the backup failed.  Data error (cyclic redundancy check).  (0 x 80070017). "I tried to save the system image on a recordable Blu - ray 25 GB disk.  If I do the same exact process on a Windows 7 machine I am able to create the image of the system, which would extend many Blu - ray discs.

  On the same screen for the creation of the image of the system, it has also an option to use the Windows backup utility.  However, when you save the removable backup media (DVD/Blu-ray) the program keeps me save an image of the system because "scheduled backup of the system image is not allowed on removable devices.  You can try to save a system image unique to this unit by clicking on create a system image in Windows 7 file recovery Control Panel. "It also goes on to say"other people might be able to access your backup on this type of situation.  The current system doesn't support setting permissions of security on the files.  Thus, your backed up files are accessible by anyone with physical access to the device. »

  Management of Windows 8 basically says that in order to recover the OEM/Windows partition, you must use a USB 32 GB.  http://Windows.Microsoft.com/en-us/Windows-8/create-USB-recovery-drive

  Is it possible to create a copy of the partition system/Windows on removable media (DVD/Blu-ray) as there are for Windows 7?  Or is the only way to restore the system after a disk crash HARD total is to create the image of the system on a USB flash drive?

  Thanks for the help,

  Stuart

  Hi Stuart,

  The 0 x 80070017, error you provided we usually means bad media.

  I suggest trying to use another drive and check if that helps.

  The system image is an exact copy of a disc. By default, a system image includes the drives required for Windows to run. In addition, it includes Windows and your system settings, programs and files.

  You can view the Microsoft Help article to create a System Image using the command line.

  How to create a system image to refresh your PC in Windows 8

  http://support.Microsoft.com/kb/2748351?WA=wsignin1.0

  If please get back to us and let us know if this helps to resolve the issue.

• Move the windows on a new hard drive

  I have three hard drives in my system and I can't the system to move the windows on the faster hard disk.

  You will need to have to use a cloning software to image (clone) of the system on the fastest disk drive or you will have to reinstall Windows on the fastest disk.

  Anyway make sure you got your data from the faster drive or it will be gone when you perform one of the functions.

  Microsoft partner - "gentlemen, you can't fight in here! This is the war room. »