Movement of jump

Similar Questions

• Satellite L350D - 20 d - movie playback jumps only if disconnected from headset

  welll I got another but a very weird problem with my laptop speakers... its starts when I saw my last movie HD maded... its just 720 p but... when I plugged in the headphones to the laptop everythink is fine.

  BUT when I disconnect head portable phones and I use laptop speakers, as in CLOCK with perfection synhroniation, my movie beginning to have problems with mininova on WinMediaPlayer.

  All felling in the same places executives jump and the whole system is overloaded... From the CPU to 100% USAGE is even one vid HD 720 p. What is weird movie still jump and make stops in same place ALWYAS BUT WHEN I DISCONNECT HEADPHONES! weird... cuz film is perectly smooth and error-free or jump or framing problems when I watch the same movie using connected headset for laptop.

  I was simply not done posting on forum abuts this cuz its sounds makes no sense, but it happened today.
  Which, in my view, it may be some vibration Toshiba speakers which are serious problems on the motherboard or processor am not completely sure... but defenytly its weird...

  When I watch this movie with head phones and sounds through everythink pregnant headset is fine but only I disconect head phones films had serious problem in the game... This is for some disturbrance of Toshiba speakers... or right speakers are bad for this laptop?
  Maybe to big magnezium? What making magnetic disturbrance on the motherboard? not sure, but it still happens

  Hello

  I think your problem has nothing to do with the speakers
  You said that the CPU usage increases and that the system is overloaded
  This is the reason why the movie does not run smoothly

  Now, you should check what system process the cause
  If this problem would appear, start the Task Manager and check under the processes tab.
  You can see the process that stresses the CPU and verrouillerait material resources close this process would be useful

  In your case I would google for more details on the background process and possibly one of the installed 3rd party software and tools cause it

• Movement while jumping help

  Hello! I am very new to the use of flash/actionscript 3 and I started to create a very simple game, but I'm really stuck on getting my character to move by jumping. For the moment, she can move and jump, but not at the same time. I tried to look into this but I can't seem to get anything to work. Again, I am new so any help would be great appreciated! This is the encoding that I stripped to any movement of character so far.

  Stop();

  Gravity 'weight '.

  var gravity: Number = 10;

  skip the 'power '.

  var jumpPower:Number = 10;

  is the drive already jumpting?

  var isJumping:Boolean = false;

  placement of the ground

  var field: Number = 377 - thief_mc.height;

  Listening on a button

  stage.addEventListener (KeyboardEvent.KEY_DOWN, onKeyPress);

  Wait for the unlock key

  stage.addEventListener (KeyboardEvent.KEY_UP, onKeyRelease);

  stage of the update

  stage.addEventListener (Event.ENTER_FRAME, update);

  on key press

  function onKeyPress(evt:KeyboardEvent):void {}

  If you press left, walking to the left

  {if(evt.keycode==Keyboard.Left)}

  thief_mc.gotoAndStop ("walkleft");

  thief_mc.x-= 10;

  }

  If you press right, walking straight

  else {if(evt.keyCode==Keyboard.RIGHT)

  thief_mc.gotoAndStop ("walkright");

  thief_mc.x += 10;

  isJumping = true;

  }

  Press space to jump

  {if(evt.keycode==Keyboard.Space)}

  {if(!isJumping)}

  jumpPower = 30;

  isJumping = true;

  }

  }

  }

  on the unlock key

  function onKeyRelease(evt:KeyboardEvent):void {}

  If the arrow to exit left side forward

  {if(evt.keycode==Keyboard.Left)}

  thief_mc.gotoAndPlay ("Idle");

  }

  If release straight facing forward

  else {if(evt.keyCode==Keyboard.RIGHT)

  thief_mc.gotoAndPlay ("Idle");

  }

  }

  calculation on how thief_mc high jump and where he jumps too.

  function update(evt:Event):void {}

  {if (isJumping)}

  thief_mc.y = jumpPower;

  jumpPower-= 2;

  }

  If (thief_mc.y + gravity < ground)

  thief_mc.y += gravity;

  else {}

  thief_mc.y = Earth;

  isJumping = false;

  }

  }

  If you treat the market in the same way as you d the jumping, it should be easier to manage.  Something like...

  Gravity 'weight '.

  var gravity: Number = 10;

  skip the 'power '.

  var jumpPower:Number = 10;

  is the drive already jumpting?

  var isJumping:Boolean = false;

  placement of the ground

  var field: Number = 377 - thief_mc.height;

  var isWalking:Boolean = false;

  var direction: Number = 1;

  Listening on a button

  stage.addEventListener (KeyboardEvent.KEY_DOWN, onKeyPress);

  Wait for the unlock key

  stage.addEventListener (KeyboardEvent.KEY_UP, onKeyRelease);

  stage of the update

  stage.addEventListener (Event.ENTER_FRAME, update);

  on key press

  function onKeyPress(evt:KeyboardEvent):void {}

  If you press left, walking to the left

  {if(evt.keycode==Keyboard.Left)}

  thief_mc.gotoAndStop ("walkleft");

  direction = - 1;
  isWalking = true;

  }

  If you press right, walking straight

  else {if(evt.keyCode==Keyboard.RIGHT)

  thief_mc.gotoAndStop ("walkright");

  direction = 1;
  isWalking = true;

  }

  Press space to jump

  {if(evt.keycode==Keyboard.Space)}

  {if(!isJumping)}

  jumpPower = 30;

  isJumping = true;

  }

  }

  }

  on the unlock key

  function onKeyRelease(evt:KeyboardEvent):void {}

  If the arrow to exit left side forward

  {if(evt.keycode==Keyboard.Left)}

  thief_mc.gotoAndPlay ("Idle");
  isWalking = false;
  }

  If release straight facing forward

  else {if(evt.keyCode==Keyboard.RIGHT)

  thief_mc.gotoAndPlay ("Idle");
  isWalking = false;
  }

  }

  calculation on how thief_mc high jump and where he jumps too.

  function update(evt:Event):void {}

  {if (isWalking)}
  thief_mc.x += direction * 10;
  }

  {if (isJumping)}

  thief_mc.y = jumpPower;

  jumpPower-= 2;

  }

  If (thief_mc.y + Gravity<>

  thief_mc.y += gravity;

  else {}

  thief_mc.y = Earth;

  isJumping = false;

  }

  }

• movement of jump software

  Just bought hp envy 15 x 360 touchsmart. I play the piano and put sheets of music on my laptop and found out there is no software on my laptop to turn the pages of music without actually in contact with the screen. I was wondering if it is possible to load software of jump movement and what so where can I get this. Or did anyone know of software motion that focus on my hp envy 15?

  Thank you

  wrk17

  Hello

  Your machine has sensor Leap? If not, then No, the software will not work. The sensor will be BREAK under him.

  Kind regards.

• Resize a movie FLA &amp; jump button (help)

  Hello

  I want to resize an animation Flash (full movie) which had a dimension 448 * 280 pixels size.
  and need to play automatically instead of click the button START INTRO

  someone help me please on this issue,.
  Thank you
  concerning
  zains

  The extent of resizing goes.  If you want to resize the source file then you need to go change the dimensions of the document and then change everything piece by piece to fit into the new dimensions.  The alternative is to simply change the dimensions specified in the html page that includes the file.  This may affect the quality of any bitmap image in the file.

  As regards to the beginning question goes, it is that there is a stop(); command at the beginning of the timeline that you need to remove so that the file is not stopped at the beginning of the year.

• HP Envy with movement of jump

  I just discovered that my brand new HP Envy 17 is not Bluetooth after trying to install a Microsoft mouse, CAUGHT!
  How can get Bluetooth on this laptop now? I also just bought an envy printer that doesn't work as well.

  Hello

  Another reason: for this part, not BT drivers for Windows 8.1 (fully tested) until April 25, 2014 available so before many products that had no Bluetooth. I do not use BT so no problem at all. If you wish, you can use Bluetooth dongle.

  Kind regards.

• Satellite Pro A300 - the cursor moves continuously when connected an external mouse

  Hello

  I have a Satellite Pro A300. When I connect a mouse directly by USB the cursor moves constantly. I also have a mouse attached via a docking station, Toshiba and that works perfectly.

  It doesn't matter what USB port I use or if the laptop is connected to the docking station or not, or if it works on AC or on battery power.

  I thought it was the mouse that was the problem, so I went and bought a new one but the problem persists.

  Actually, while I wrote this post, he has stopped doing that and then started! Very frustrating.

  Can anyone help?

  Thank you

  Susib

  Hello

  How about, the touchpad is the slider moves and jumps using the touchpad?
  Try to disable the touchpad while using the USB mouse control if you can notice a difference

  What about BIOS?
  You have the latest version installed?
  Check it!

• Computer has a black screen with a message "power off, then reinstall the jumper in normal mode position."

  Original title: black screen?

  My computer has a black screen with: turn off power and reinstall the jumper in normal mode position? Help!

  Hi Miguel C.
   
  a. What is the brand of your computer?
   
  b. do you remember of any changes to your machine before the question?
   
  I don't know what motherboard you have, but some is shipped with the 'Clear CMOS' jumper in the position unequivocally. Check the manual of your motherboard for this rider and make sure that it is in the normal position.
   
  J7B1 computer configuration jumper block requires a single rider set the configuration of the BIOS Setup utility. This allows the configuration in the configuration utility BIOS, including the frequency of bus and the processor motherboard speed.
   
  Note: Do not move this jumper with the computer turned on.
  
  Warning of the BIOS:
  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
   
  I think, you'd be best to contact the manufacturer of the motherboard as this seems to be a motherboard problem.
   
  Aziz Nadeem - Microsoft Support
   

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Play movie (detection of frame 15 and stop there)

  Hello
  
  I want a simple solution, but in flash, it is not as easy as I want it. In the code below, it plays the movie then jumps immediately to the 15 framework. I want the movie to play until the TI frame reached 15, then stops.
  
  I tried a loop to detect the frame which plays, but not good. Can someone help me?
  
  

  Try:

• MacBook pro 2015 bootcamp error

  Hi all

  I have a MacBook pro, 2015, with 10 Windows boot camp on it (300 GB Mac, PC 200 GB)

  Windows and Mac have been working fine, until yesterday

  I tripped over the cable and disconnected the device (no problem, right?) but it off instantly, even if it had a decent amount of battery left and noticed a time of incredibly long boot, but Windows (which was what it was defined on) seemed fine, so I don't think about it

  But today I tried to use the side mac and I have serious problems

  -Incredible Lag (I pressed the H key, as a test and it came 2 minutes later)

  -Controls unresponsive (keys don't line up with what has been typed)

  -The mouse move (he jumped to a place randomly after trying to move)

  I did not connect, so I don't know anything about the problem

  If anyone has had this problem or knows something about it, I'd be delighted to hear your advice

  Thank you!

  Stop

  Disconnect all external devices

  Reset SM

  Reset the management system (SCM) controller on your Mac - Apple Support

  start in safe mode

  Try safe mode if your Mac does not end commissioning - Apple Support

  check the operation of your system

  with deleted devices, restart normally.

  Recheck the system.

  If the problem persists, you can view a report of etrecheck for more Analytisis

  www.etrecheck.com

• Default BIOS password

  Hello everyone,

  I had real trouble moving my Touchsmart 600 - 1030fr to Windows 8. Due to incompatibility of graphics driver, I see nothing on my computer after the startup screen (the one with the blue window).

  I discovered that a change in the BIOS can solve this problem, but my BIOS asks me a password. I tried to reset this password in removal and replacement of the battery from the motherboard. Although he told me that the BIOS has been reversed to the factory settings, the password is always there.

  Is anyone of you know what is the password to the factory settings?

  Also, I read on the forum but

  • The password 12345 found heredoes not work
  • the text which States

  "NOTE: If a new non - HP BIOS is installed, and turn on a password is used, and you don't remember the password to start the computer, see the support document of specification motherboard for your computer model to find the password reset instructions to clear BIOS passwords."
  not help me in my documentation of the computer do me not any suspicion on the specification of the motherboard and it is a real BIOS HP.

  Thanks for your help.

  Here are the specifications of your desktop HP TouchSmart 600-1030fr and it's card mother Pegatron IPP7A-M5 (E60). Please follow these instructions;

  The BIOS password is used to protect the settings of the BIOS against unwanted changes. If you have forgotten your password, you can use this jumper to reset password settings.

  To clear the password BIOS follow these steps:
  
  1 turn off the POWER the computer and unplug the power cord.

  2. Locate the jumper marked CLEARLY P.W.

  3. move the jumper on the PSWD jumper on pins 3-1.

  4 wait about 10 seconds, and then return the jumper to pins 5-3.

  5. connect the power cord and turn on the computer.

  6 hold down the F10 key during the boot process to enter the BIOS setup. You will not be asked a password.

  Diagrams are on the page "card motherboard" for your computer.

• P7-1510: power on password

  Someone has a by-pass road for power on passwod for this PC,

  Thank you

  Please see the following weblink that has steps to remove the BIOS password:

  http://support.HP.com/us-en/product/HP-Pavilion-P7-desktop-PC-series/5330777/model/5331427/document/c03135925

  You must watch the CMOS clear diagram and diagram of obvious password together, somehow.

  The side left (pins 2, 4 and 6) is the side CMOS, and you drop this rider (leave it on pins 4 & 6).

  You want to move the jumper on the picture on the side right of the diagram to clear the password.

  You remove 5 and 3 pins and place on the pins 1 and 3.

• HP Z620: Jumpers on the motherboard Z620 FMB-1102

  I'm very curious to learn what is the jumper between the PCIe slots on a card mother FMB-1102 don't. I've searched high and low, but can't seem to find a refernce to it in any documentation. The dilemma is that my Hauppauge TV tuner card is not recognized in the Gen3 slots, but it is in the Gen2 ones. I have the BIOS current (3.88) and has been inspecting my boaerd when I noticed this jumper. Wanted to know its function. Thought that maybe he defined the parameters of cardslot somehow. Any help?

  See you soon,.

  Pete

  pete914, Z620 rider is you ask the subject located between the connector PCI-32 white and black PCIe connector above it?  It's the jumper highlighted in yellow in the picture below?

  

  If so, it is the header of E15 boot block recovery.  There is a jumper on pins 2 and 3 (pins beside your right hand in this picture).

  Move the jumper to pins 2-3 (default) to 1-2 manufally forces the system into recovery for the boot block mode.  The system is trying to reflash the BIOS OF THE system, a player connected USB will boot the system with the jumper on pins 1-2.  It will appear as no system startup and there will be a few flashes of keyboard and maybe some screen guests (it has been a long time since I tried this).

  If the system ROM BIOS is corrupted, the system will automatically for the boot block recovery mode.  It can be forced into this mode by moving the jumper and then reboot the system.  If your computer starts normally, do not move this jumper.  Leave it alone.

  Does that answer your question?

• Nedd support reset password computers desktop bios HP Pavolion P6 2311 l

  Dear support team,

  I have a PC desktop Pavilion P6, I set the bios password.

  Then I reset bios password is again empty password and reboot the PC.

  But PC stills appear need password.i use old password or blank password but incorrect bios.

  I use desktop HP Pavilion P6 2311 l.

  I try to remove the PIN cmos and move the jumper, but these aren't the results.

  I find the motherboard bios to default passwordd, but I can't.

  Thanks and greetings

  If it does not, you will need to either have the BIOS chip replaced by HP or a BIOS repair company. That's where she is now.

• Pavilion p7-1000 bios reset

  I am trying to boot from a cd, but when I go to boot at startup options, it asks for a password. I removed the CMOS of the day battery overnight and that reset the clock, but he always asks for a password. I can't because of the password of the bios for the parameters.

  Y at - it a default password for this model?

  How can I fix so I can choose to boot from the DVD drive?

  Hello:

  You must watch the CMOS clear diagram and diagram of obvious password together, somehow.

  The side left (pins 2, 4 and 6) is the side CMOS, and you drop this rider (leave it on pins 4 & 6).

  You want to move the jumper on the picture on the side right of the diagram to clear the password.

  You remove 5 and 3 pins and place on the pins 1 and 3.

  Of course all of the steps on the following link.