Movie Maker 6.0 - limiting length of film?
Hi all, I posted a question earlier, and although I got an immediate response, and I acted on the advice, I can't go more than 18 minutes on a film. Zealous employment transitions limits the memory needed to make a single movie? Is there a loimit number of clips? Help!
Hello
You say that you have 300 GB on the disk? How this is FREE and is the free part on the
same partition as you work? I think you need 2 or 3 times the free zone on the partition
you are working on doing your job properly. That is to say if you have a partition C: and D: and C: only
a 2 free concerts and D: and 150 free concerts and you work on C:, then you are limited to its
and if you were working on D: it is a lot more available space. And if free space on D:
was small and C: had a lot and then work on D: would also restrict you.
This utility will show you how the space is used.
WinDirStat - free
http://WinDirStat.info/
---------------------------------------------------------
Also perform these just in case where:
Follow these steps to remove corruption and missing/damaged file system repair or replacement.
Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228
Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html
I hope this helps and happy holidays!
Rob - bicycle - Mark Twain said it is good.
Tags: Windows
Similar Questions
-
Microsoft Movie Maker - cannot change the length of each clip.
Cannot change the length of each clip on Microsoft Movie Maker.
I clicked on 'tools', then 'options' in Microsoft Movie Maker after importing my media and organize my clips as the way I would like it. When I then click on the "Advanced" tab, image duration shows only 5 seconds with the transition period only 1.25 seconds, which is the default setting and that is also what I want. However, when I play my project in Movie Maker, it accelerates through each clip. I also noticed that when I press the title of 'Clip' in my headings at the top left and then click on 'Properties', the duration of each clip shows that only 00:02 seconds. Which is why my speed clips too quickly.
I would have thought that setting my time of duration in the Tools section would then set in the Clips section, but this is obniously does not. I don't understand why everyone would show differently and wonder if you can help me to slow down the speed that my movie is playing.
Thank you
Cannot change the length of each clip on Microsoft Movie Maker.
I clicked on 'tools', then 'options' in Microsoft Movie Maker after importing my media and organize my clips as the way I would like it. When I then click on the "Advanced" tab, image duration shows only 5 seconds with the transition period only 1.25 seconds, which is the default setting and that is also what I want. However, when I play my project in Movie Maker, it accelerates through each clip. I also noticed that when I press the title of 'Clip' in my headings at the top left and then click on 'Properties', the duration of each clip shows that only 00:02 seconds. Which is why my speed clips too quickly.
I would have thought that setting my time of duration in the Tools section would then set in the Clips section, but this is obniously does not. I don't understand why everyone would show differently and wonder if you can help me to slow down the speed that my movie is playing.
Thank you
================================
The change of setting to: Tools / Options /.
Advanced... tab applies only to the added clips
to the timeline * after * you change the setting.If you switch to view "Storyboard" and select
all of the clips as a batch (select one and the type...
CTRL + A)... you can add the 'Speed Up, Double.
or "Slow down, half" effect of changing the
duration. Simply select all clips / right click
the effect on the menu... Choose...
Add to storyboard table.'Speed Up, Double' cuts the duration of half.
"Slow Down, half ' double life.
These effects can be added up to six times.
If you need finer adjustment...
the info may be useful:You can change the duration for each clip
manually. Move your pointer autour the
edge of an element until you see a double red
arrow. Now, drag the double red arrow...
you will see if show a ToolTip displays the duration
train to change.Or... just to redo the project after changing
the long-term: Tools / Options / Advanced
tab.
Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *. -
Windows Movie Maker-how change the length of a video
Windows Movie Maker on Windows Vista
My video is 4 hours long and I need to cut it in half in order to put on the dvd with dvd machine program. How can I do this?
My video is 4 hours long and I need to cut it in half in order to put on the dvd with dvd machine program. How can I do this?
=====================================
Wow! This is a huge project... If you have not had errors and
crashes, there must be some kind of miracle.Just a thought... I wonder if a DVD Double layer would
work with the file as it is?In any case... you have saved the project in WMV or AVI
film format in a folder on your hard drive?To get a separation of the file... you could re-import-the movie
Creator and divide.Windows VIsta - work with clips in Windows Movie Maker
(Divide and combine Clips)
http://Windows.Microsoft.com/en-us/Windows-Vista/work-with-clips-in-Windows-Movie-MakerAnd... the following free software may be worth a visit:
VidSplitter
http://www.Geovid.com/VidSplitter/If you have saved as AVI... see the following:
VirtualDub
http://www.videohelp.com/tools/VirtualDub
(left click of he who said):
'Download from mirror (direct link) (1.6 MB)')VirtualDub: How to split the video
http://www.ScreenVirtuoso.com/VirtualDub-split-video.htmlVideo editing tutorial - using VirtualDub
http://www.astahost.com/info.php/video-editing-tutorial_t11655.html
> not compatible with .wmv or .asf filesVolunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
Windows Movie Maker: I can't complete my film
I'm pretty computer savvy, but could not understand this problem. I got a new computer which is Windows 7. Windows Movie Maker was not about it, so I downloaded the free version of Windows Movie Maker 2.6. It worked fine for awhile and I recently did a short video successfully without any problems. Until a few days ago when I tried to finish another movie and save it on my computer, it won't in a movie. I tried all the different film settings to save my movie about the file size, quality, etc., and yet, it will not save. I get the same error message stating "unable to complete the Save Movie Wizard. Your film is not properly registered. This project contains files which are lacking or which have been modified after importation sources. Your project cannot be saved as a movie until the source files have been located or deleted from the project. "I checked that all the different files where not moved or changed on my computer, they were where they were when I made the film. I also tried to save my film previously saved successfully to the movies again to make sure that he had nothing to do with the current files and it wouldn't save. I tried to read single movie files, which are in the film, apart from Movie Maker, and they play very well. I have a lot of space on the hard disk on my computer to save on. I don't know what the problem is. My computer model and manufacturer is a Dell Inspiron if that makes a difference.
I'd appreciate any help what so ever to solve this problem.
Thank you, Shelly :)Later came across the same problem when recording as "high definition (720 p). But re - start Movie Maker solved the problem. Definitely seems a problem of memory [leak].
-
Windows Movie Maker WLMM NOT... Film isn't to end of movie
REF... Movie Maker (NOT live w... terrible 1 MM),Version 2.6.4038... & Windows 7
Ihave Benn using MM, the original, for several years with great success. Had to replace a camcorder that will produce only the AVCHD files. These successfully converted files Messrs. unique pictures are all JPEG.
Problem is that I just finished a movie, using WMM files & photos JPEG. Computer will not complete the making of the film? It says "not enough memory to places... when there is a lot of Go on each drive, I tried to register on!"
Made movies with success on other occasions... same mix. Cross, I checked all the files in priject and the source of the files that are in order... Could someone guide me in the right direction please?
Thank you very much... Darcy
When the only solution viable response to a tech support question is 'Please stop doing what our product is advertised to do', it's time to stop using the product.
This isn't just a comment on this topic in this forum - I looked for an answer to this question for a couple of hours, and the reality seems to be that WMM not just do what it is advertised to do this very regularly, even what requirements have been far exceeded. Nobody has all the answers as to why. It is a reason to go back to Linux, for me. FFmpeg does not have a GUI, but it works. WMM is one of the few reasons why I should continue to be part of my tasks in Windows.
-
He's saying that he cannot save the movie to the specified location. Ensure that the use of original source of your movie files are always available (which they are!) that the backup location is always available - what it means?
Pls help
Thank you inadvance
The most common reason, you see this is because Movie Maker is unable to manage one of your source files. Movie Maker prefers to video .wmv and .wma for audio, so if you use other types of files in WMM 2.1, you should try to convert them to these types of files first. Freemake has a couple of converters (Freemake Video Converter and Audio Converter from Freemake) that can do this quite easily. Or you can look around.
Another reason, you could see it is if your project has a lot of pictures. The version of XP Movie Maker (WMM 2.1) was not too well manage memory and could not refuse to save your movie once it takes about 100 photos. If this is the case, try to divide your project into two (or more) separate projects and recording each part as a separate sequence. If it works, at the end you can put them back together by creating a final project and adding partial movies created previously.
-
Can Movie Maker - I adjust the length of the fade
I have an audio soundtrack I want to disappear gradually.
But the fade in / out is about 1 second.
It is possible to extend the fade out to maybe 5 seconds please?Thank you.
Will beI don't think that you can adjust the fade but you could split the audio file
5 seconds from the end and set the volume of the small section.Windows Vista - work with clips in Windows Movie Maker
(Divide and combine Clips)
http://Windows.Microsoft.com/en-us/Windows-Vista/work-with-clips-in-Windows-Movie-Maker -
Movie maker file too big DVD maker
The movie in Windows Movie Maker, I made is 180 minutes. My version of Windows DVD maker cannot contain the length of film does not exceed 150 minutes. I really don't want to cut the film, or split it into two films. Y at - it an upgrade for the creation of DVD which will contain more data, or is there something else I can do?
Hello paige2714,
Have you tried to use DVD +/-R double layer. You get 4.7 GB on a standard DVD, but a DL media you get close to 8.5 GB of space which means double it recording time. They are a little more expensive. Also Verbatim media are excellent! Don't forget to set the speed down when copying on DL media. I burn a 4 x, but for less fortunate to a coaster I would burn your master (a you intend to maintain) to 2.4 x. hope this helps you. Let us know if the DL media help you anyway. Make it a great day!
"In the end, the love you take, is equal to the Love You Make"
-
Problems affecting the points of beginning/end/split in Live Movie Maker
You know how when you add video for Windows Live Movie Maker, it shows a piece of film in the editing section? And how this 'film' is divided into a series of images separated by black bars? Well, whenever I try to put any kind of point in the program, it automatically places it in the closest division between the images on the film. I have Windows Vista with the latest service pack, I use video 3gp in the film, and I had this problem since the first time I've used the program. Please help me. I know that's not supposed to happen because my friend also use Windows Live Movie Maker and never had this problem. In addition, on a somewhat related note, MP4 does not, either. It is said that it does not recognize.
Hello
The question you have posted is related to Windows Live Movie Maker. So, I suggest you to post your questions in the Windows Live forums for assistance.
Here is the link: http://windowslivehelp.com/product.aspx?productid=5
-
"Movie Maker project file cannot be used in this context.
I have created a slideshow of photos with music. When I use Windows Movie Maker and continue to publish my movie. I chose to publish my movie to a DVD. Then Movie Makers boot me and open DVD Maker. I try to put some audio in the background of the menu and it won't let me I get a error that says "Movie Maker project cannot be used in this context..." The heck that means and how to fix it?
Help!
When you import a Movie Maker project file directly from the film
Manufacturer in DVD Maker I don't think you can continue to edit.Could you publish (save) the Movie Maker project in the. WMV
Film format and then import them saved. WMV to DVD file
Manufacturer and add other source files.Windows Vista - publish a movie in Windows Movie Maker
http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-MakerMovie Maker Vista - Edition
http://www.Papajohn.org/Vista-publishing.html -
Windows Movie Maker has stopped working and will not save
I used Movie Maker for some videos and they all worked without any problems. This one I edited without any problems, but when I go to save it I get an error message that says that "windows live movie maker has stopped working". My film is not as long, only four minutes, and it has music, a .wav file and text. My video files are AVCHD. I tried to remove the text and music, but it does not export again. I also tried a clean boot, but that doesn't work anymore.
Signature of the problem
APPCRASH
MovieMaker.exe
15.4.3555.308
4f596bb7
igdum32.dll
8.15.10.2342Hello
The application is creashing done igdumd32.dll, let's run the System File Checker tool.
Method 1:
This tool will try to replace the missing or damaged system files.
To do this, please visit this link:
How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
http://support.Microsoft.com/kb/929833
If the problem persists, we will try to fix the Movie Maker application. See method 2.
Method 2: we will try to fix Windows Live Movie Maker application.
a. click Start
b. go to the Control Panel
c. click uninstall a program
d. Double click on Windows Live Essentials
e. Select repair Windows Live Movie Maker.
If the problem persists, you can ask your question in the Windows Live Forum.
http://answers.Microsoft.com/en-us/windowslive
I hope this helps.
-
Why the length of film does not change when I remove Vista Movie Maker clips?
You have not answered my other question. I get an error "does not fit" when you publish a movie on dvd. I deleted half the clips in the storyboard and length does not change. I always get the error "will not fit". After I saved the project. It seems that it becomes the length of the imported clips not what is in the table of Storyboard. The length of the table of Storyboard is only 01:30, but the length in the window shows 02:42 that is causing the error. It seems to me that it should use the length of the table of Storyboard because it's what makes the final video on dvd.
Yes... adding or removing items from the timeline should change the duration of the project.
The files in your component collections have no effect on the duration of the project.I suggested that you publish in the movie .wmv format to see if the version with clips
removed would still last for 02:42.As I have said from the beginning... creating several small projects may be your solution.
I'm sorry that my suggestions seem redundant to you. Perhaps you could find assistance elsewhare.
There is a forum dedicated to Movie Maker on the following link:Windows Movie Maker Forums
http://www.windowsmoviemakers.NET/forums/ -
How can I change the format of a film shot in Microsoft Movie Maker?
Help! Windows Movie Maker: convert a file
How can I change the format of a movie in movie maker from microsoft so that it can be universally accessed? or uploaded to youtube?
I suspect you want to view/download the. Project MSWMM file
which is only useful for re - edit in Movie Maker.Try to save your Movie Maker project in the. Film WMV format.
With your project open in Movie Maker are... try the following steps...To save in a .wmv movie file...
Type of... CTRL + P (or go to...) File / save movie file)
to open the wizard movie recording.
Choose... My computer.
Next /.
Enter a name and a location.
Next /.
ICT... "Best quality for my computer.
Next /.
Wait while the movie is saved.
Finishing...The next YouTube document offers guidelines for downloading video:
Quote: "not bigger than 2 GB and no more than 15 minutes in length"
YouTube Help Center: for starters: how to download
http://www.Google.com/support/YouTube/bin/answer.py?hl=en&answer=57924 -
The short films that I do in Windows Movie Maker fail to run after about 1 minute, regardless of the format, I save in (WMV or AVI) any ideas why or what I am doing wrong?
I'm just looking to add the opening titles to the pieces of film of aprox 3 Germans, but everytime I try and save files for uploading to Youtube, then fail shortly after a minute. The sound and picture freeze while the counter continues until the end of the file.
am driven crazy by this so any advice would be welcome...
Hello
My friend John Papa - MVP - is the expert on Windows Movie Maker.
PapaJohn.org
http://Papajohn.org/PapaJohn - online tutorials
http://www.Papajohn.org/mm2-online-tutorials.htmlWindows Movie Maker Tutorials - see the menu on the left and others on the main screen.
http://www.windowsmoviemakers.NET/tutorials/Windows Live Movie Maker Forums are good sources of information:
Windows Live Movie Maker that works on Vista and Windows 7, see the link under Windows Live Essentials.
http://windowslivehelp.com/Windows Live - Movie Maker Portal - official support Site - see also the Forums of the right part of the page
http://windowslivehelp.com/product.aspx?ProductID=5====================
These might help:
Getting started with Windows Movie Maker
Import video, photos and audio on Windows Movie Maker
Get a movie in Windows Movie Maker
Make a movie quickly in Windows Movie Maker (AutoMovie)
Publish a movie in Windows Movie Maker
I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
For Windows Movie Maker, how in the "film"?
I'm trying to sing along with the music, but whenever I have it set on the Gateway Web Camera doesn't so I tried Windows Movie Maker, how to make me in the film with the song?
Hi MackenziArcher,
1 Windows operating system you are using?
You can view the following items and see if it helps:
Publish a movie in Windows Movie Maker
Hope this information is useful.
Maybe you are looking for
-
Firefox browser will let me see all the info site. other browser does.
Key information are not loaded on my banking site using Firefox as my browser. When I contacted my bank they asked to use Internet Explorer and the browser loading all the information requested. My Bank suggested that contact Firefox to correct the p
-
My Equium does not start!
I turned it off last night, I went to turn on 2 hours minutes splash screen there is no where you can choose to start windows normally or last mode known and safe etc.I ve tried them all but this is for the loading of Windows, but after a few seconds
-
0xc000000fb solutions to this error code must be running in safe mode or stop crashing
very annoying is not good for the soul! any help would be great... must be free however!
-
Cannot enter the numbers on the screen of the phone - HELP
Hello, I hope someone can help. I'm having a problem with enter numbers to be able to call on the phone screen. When I put a number in said unfortunately there have been contacts. I reset my phone and restarted.I hope someone can helpThanks in advanc
-
Received a message asking me to click on a link
The message is: "Dear Outlook name user, please reconfigure your Outlook information again by clicking on the following link.» Outlook 2010 "(ma question: est ce phishing?)"