Cannot enter the numbers on the screen of the phone - HELP

Similar Questions

• URGENT! After installing 6 Fusion and creation of new virtual machine with Windows 7, I get a message "VMware Fusion cannot enter the unit". WHAT SHOULD DO?

  After purchase, installation and activation Fusion 6 with the license key, I had a library of VMS showing 2 Boot Camp partitions. It's strange that I only have 1.
  I tried to activate them but received a message that it is out of date in 2 cases. (see annex 1)

  I started a new virtual machine with a Windows 7 installation disc directly on my HD. I have provided a way to do this and followed the instructions of Fusion to the screen.

  Apparently, everything went well and after several restarts, the installation appears to be over (see annex 2) I tried to open and run the installed Windows 7. I had however a window with the following message:

  "Pending the unit.

  "VMware Fusion cannot enter the unit. Please wait until the unit starts automatically, or interact with the virtual machine below. ' (see annex 3)

  Here Windows 7 seems to start but after a while with the home screen and of the Øresund finishing this window closed and open a new window called library Virtual Machine on the left showing the partitions of Bootcamp and the Virtual Machine Windows 7 x 64 and in the middle gray a representation of what is supposed to be the Windows 7 desktop. (see Exhibit 4). When I opened the settings button a window with different setting options pops up. This mark means to me that Windows is installed but the final opening isn't the case

  When you quit Vmware Fusion indeed Windows seems to be close (see part 5)

  What is going on? What has gone wrong? What should I do? I don't know how to solve the problem.

  I should f.i. remove the virtual machine from Windows 7 and is free automatically made partition on my HD as the reboot with the Windows installation disc? or y at - it another way to enter the UNIT?

  Help, please!

  Thanks in advance

  Your virtual machine is running. It is in the unit - which each windows gets its own window of Mac - and you have no application Windows running, there is no visible windows. You can start a Windows application in the start of Fusion menu in the menu bar at the top right, or turn on the Windows task bar on the view menu and start applications from there. Or use the view menu to switch to the Single mode or full-screen, which puts all of your Windows desktop in a window separate from Mac.

  You do not have two partitions to Boot Camp on your Mac, you have two virtual machines named "Boot Camp partition".

  The message about it being unable to enter the unit arrives while the merger is pending for the tools begin to run, because the tool is necessary for the unit.

• Tecra M5 cannot enter the BIOS to change the setting too boot from cd first

  Tecra M5 cannot enter the BIOS to change the setting too boot from cd first

  I bought on ebay and the seller sold me a dubious version of xp so I want to format and install my own at the start he said:

  The Intel Boot Agent GE v1.2.31 initialization
  KE - E05: the LAN adapter's configuration is corrupted or has not been initialized. Boot agent cannot continue

  Hello

  The message looks like you tried to boot and install Windows LAN

  If you want to change the boot order, I recommend pressing the F12 key, immediately after that the laptop was turned on!

  A new start menu should appear, then you can choose the reader of CD/DVD (ODD) and a boot device.

  Also by pressing the C button should allow you to boot from the CD inserted, bootable.

  Welcome them

• I tried all these steps and still no progress, cannot update or restore my phone. When you try to restore an error appears saying 'cannot find the phone (9).

  I tried all these steps and still no progress, cannot update or restore my phone. When you try to restore an error appears saying 'cannot find the phone (9).

  We do not know what are the following steps, because you have not provided their. Support this article has suggestions for your specific error code.

  If you see errors 9, 4005, 4013, 4014, when you restore your device iOS - Apple Support or

• ID but cannot open the phone

  معرف ولكن لا يمكن فتح الهاتف

  I know that ID but cannot open the phone

• iTunes does not recognize my iPhone on my HP Pavilion Windows 10 5s, so cannot sync the phone, which has the latest operating system running

  iTunes does not recognize my iPhone on my HP Pavilion Windows 10 5s, so cannot sync the phone running. I downloaded the latest OS for the phone and the latest version of iTunes on my PC and have tried all USB ports several times. I also reinstalled drivers USB to the PC.  The phone is recognized on the computer of a friend under Win 7. All shows when I plug it on mine is a page showing the 'Apple iPhone' folder display of storage internal (2.18 GB free of 14.7 GB). Troubleshooting in devices and printers, where the phone displays as "Not specified Apple iPhone" generates a message saying that "Apple iPhone is an older USB device and may not work with USB 3.0 and plug it into a USB 2.0 port." But when I use USB 2.0 (I tried several times using each of the three USB ports on my PC), troubleshooting the error message says "Apple iPhone won't work correctly with USB 3.0." This seems to be a recent problem, since in March 2016, I could spend a few songs from my PC to my phone using iTunes.

  I wish I had some ideas of people who have experienced this problem, I find to be a more frustrating one.

  Well, you aren't the only one. This just freakin happened to me. I spent the last three hours with apple and Windows supports. Now I'm reinstalling Windows 10 by last resort of Windows support councils. I got the same message USB. In iTunes, under devices something removed my 5s and the iPad. But it remains 6 s wife. I tried my computers 2-(SS) 3.0 ports and 1 port 2.0 ordinary. I tried all four thinners cables I have. I will let you know the result of the Windows reinstall.

• My computer is dead, had to get the new computer. Installed PS CS2 and tried to activate it. Cannot call the online help desk, they sent me to you to activate my software. I have the serial number and the last activation number. T

  My computer is dead, had to get the new computer. Installed PS CS2 and tried to activate it. Cannot call the online help desk, they sent me to you to activate my software. I have the serial number and the last activation number. Thank you. Or to intervene in the forum.

  
  

  
  

  [address removed by email.. mod]

  
  

  Hi carlkent,

  Your serial for Photoshop CS2 key would not work as the activation for CS2 servers were closed.

  You must visit this link to download the version CS2 and use the key to series mentioned in this link: https://helpx.adobe.com/creative-suite/kb/cs2-product-downloads.html

• Computer will not conduct the office and cannot enter the Bios.

  Original title: cannot get into the BIOS

  When I turn on the computer, the logon screen is shown with details of the computer.  The computer won't proceed beyond this point.  So I can't enter the BIOS when I press the DELETE key and there is no way the computer goes to the office.    What can I do?

  Hi Ivor,

  1. you receive messages or error codes when you try to start in normal mode?

  2. did you of recent changes on the system?

  Usually, you must press a key (for example, F2, F12, DEL, ESC) or a key combination whenever you turn on your computer but before Windows starts. The choice of the function key varies depending on the brand of your computer.

  For more information, you can consult the following article:

  BIOS: Frequently asked questions

  If you are unable to boot into normal mode, then check if you can boot into safe mode and let us know the results to proceed to further troubleshooting.

  You can view the following items to start in safe mode.

  Startup options (including safe mode)

  Start your computer in safe mode

  Hope this information is useful.

• HP G62: Cannot enter the BIOS menu, system will ask the admin password

  I just bought a HP G62.

  I add 4 GB DDR in order to get 8 GB total.

  When I try to enter the BIOS meny, prompted me the admin password.

  The seller told me he never entered a BIOS password.

  Could you please help?

  It was a keyboard problem.

  I found the solution here:

  http://dogber1.blogspot.fr/2009/05/table-of-reverse-engineered-BIOS.html

  The tool mentioned that the passphrase using a qwerty keyboard.

• ThinkPad 13 - cannot enter the UEFI BIOS without entering the W10 first

  I have a brand new 13 Thinkpad which I'm really pleased.  However, the user manual seems to be wrong.  I can't enter the UEFI BIOS in F1.

  It seems that the only way to get into the BIOS is first go to W10 and make a shift/reboot or a restart/F1.

  OK, suppose that at some point in the future I need to access the BIOS (ex: changing boot options) and is not a job W10 or perhaps corruption W10.)

  How to enter BIOS without first W10? BIOS maybe consulted independent of the operating system?

  Hello and welcome,

  It is by design.  "Shutdown" in Win 10 more resembles the hibernation and it is not safe change hardware/BIOS setup in this State.

  F1/F12/ENTER should be available after a boot failure or a forced shutdown via a long press on the power button.

  BTW, UPDATE/restart and restart should just do the same thing. SHIFT button should cause a real stop after a followed Fx market should work.

  Z.

• Laserje CP2025n: Cannot enter the secret menu on the printer HP Laserjet CP2025n range

  I need to replace making paper rolls in the printer. I found countless videos and instructions on how to enter the secret menu for ultimatly choose "Pickup rollers" option to block in place. The combination is by pressing the arrow to the LEFT and the red button to cancel at the same time which should then display "2ndary Service" option Menu.

  I'm doing something wrong? Is it because it's a CP2025n and not a CP2025?

  -Bill

  I thought about her from another Web site. IDK why but below has been what has worked.

  1. Hold the left arrow key)<). the="" display="" will="" continue="" to="" cycle="" through="" setup="">
  2. Press Cancel (x), then release the button left arrow)<). now="" an="" additional="" "2ndary="" service"="" menu="" will="" appear="" in="" the="">
  3. With "2ndary Service" showing (use arrows left/right, if necessary), press OK.

  So instead of building and now their whole (which is what most sites say) you must keep LEFT and hit CANCEL it once everything by letting go of the LEFT.

  Was able to access the menu 2ndary servce.

• ApplicationMenuItem called with null in JDE 4.6 when you enter the phone number

  When I install a custom phone app, ApplicationMenuItem and

  try to enter a number on the keypad of the native Dialer, and then click the custom menu,

  my custom ApplicationMenuItem is called with a null context object.

  This same code + test case works well under the 4.5 JDE / 8300 emulator

  and device 8320, but fails under JDE 4.6 with the BB 9000 emulator

  and device

  To reproduce the bug:

  * Build/launch of the attached test application

  * Send with previous key

  * Go to the native Dialer

  * Enter "123" on the keyboard of the phone

  * Click on the trackball

  * Choose Bug49 the context menu

  * It will appear a dialog box indicating "context has the null value - is this a bug?

  NOTE that if, rather than enter a number on the keypad of the phone with step 4.

  a call log is selected, then it works and a non-null context object is passed.

  Can I make it work?  If this is a known bug, are

  It no work around?

  import net.rim.blackberry.api.menuitem.ApplicationMenuItem;import net.rim.blackberry.api.menuitem.ApplicationMenuItemRepository;import net.rim.device.api.ui.UiApplication;import net.rim.device.api.ui.component.Dialog;import net.rim.device.api.ui.component.LabelField;import net.rim.device.api.ui.component.RichTextField;import net.rim.device.api.ui.container.MainScreen;
  
  public class Bug49 extends UiApplication { public Bug49()    {     super();      Bug49Screen screen = new Bug49Screen();       pushScreen(screen);       ApplicationMenuItemRepository amir = ApplicationMenuItemRepository.getInstance();     Bug49NativeMenu bug49NativeMenu = new Bug49NativeMenu(0);     amir.addMenuItem(ApplicationMenuItemRepository.MENUITEM_PHONE, bug49NativeMenu ); }
  
    public static void main(String[] args) {      Bug49 b49 = new Bug49();      b49.enterEventDispatcher();   }
  
     static class Bug49Screen extends MainScreen {     public Bug49Screen() {            super();          setTitle(new LabelField("Hello"));            add(new RichTextField("Hello"));      } }
  
    static class Bug49NativeMenu extends ApplicationMenuItem  {     public Bug49NativeMenu(int order) {           super(order);     }     public Object run(Object context) {           if (context == null) {                Dialog.alert("context is null -- is this a bug?");            }         else {                Dialog.alert("context not null");         }         return null;      }     public String toString() {            return "Bug 49";      } }}
  

  It is a problem in the version of BlackBerry device software 4.6.0.  It has been fixed in version 4.7.0.

• DROID X 2 keeps restarting (cannot use the phone)

  My Droid X 2 guard restarts and crashes again and again. When I'm in front of the lock screen, he said. com Motorola.service.main has stopped responding or something similar to that, and then it runs all applications saying all crashed and the phone, then restarts. I have not install anything either before and it was completely random... I am currently not able to use my phone now because he won't stop restart. I pulled the battery and the SD card without result.

  You need data Factory reset from recovery console. From here, it's a guide that will allow you to the recovery console. This guide is to make a wipe cache partition, but an option above the partition to cache wipe is a wipe data / factory reset or similar wording and that's what I want you to do. This should bring back the phone out of the box state and get you going again.

  You may need to activate the phone again. You will also need to install all your applications and put things up. Sorry for the trouble and I hope it works well for you.

• BlackBerry Smartphones cannot lock the phone through blackberry ID

  Hello

  I take a phone of my coleague who has left the company. For some reason, I can't able to connect on the phone. Firstly I didn't at first, the password of my coleague ex, I went online and changed the password. However, when I want to connect with my new password to unlock the phone, I have this message:

  "You have exceeded the number of attempts to connect.

  For security reasons, you have been locked for 15 minutes. "Click on forgotten password if you need create a new password.

  But after 15 minutes and try again, the message... helpppp

  You try the BlackBerryID, or the security password, on the device?

  It looks like the BlackBerryID if you are locked out for 15 minutes.

  A wrong entered security password would give you only a message something like «wrong password 2/10»

  Then, to change the BBID of this device and make it 'your own' device, you'll need to do a wipe of the device security. This will delete all the data in personal, contacts, calendar, etc. and restore the State of the plant basically.

  Read this: BlackBerry smartphone must be wiped before transferring the property Security

• BlackBerry software update failed Smartphone, cannot use the phone, but can attach to the computer access to the Internet.

  How to fix the phone. Software of office says "cannot communicate with the device.

  Hi and welcome to the Forums!

  Good job on the recovery! But all is not lost for your data. If you did the update via your PC, then in the early stages of the process should have been a backup of your data (assuming you do not defeat this feature). If you're on a PC, then look for in your entire hard drive to a file with the extension of the IPD (*.) IPD)... check the date and time of the results... created more recently is your best candidate and if all goes well, it was created at the time you did the update. Use this procedure to restore this file:

  • KB10339 How to use BlackBerry Desktop Manager to restore the data to a BlackBerry smartphone from a backup file

  If you use a MAC, I don't know how he does things, but maybe this KB is useful:

  • KB18776 Back up and restore BlackBerry smartphone data on a Mac using BlackBerry Desktop Software 2.0

  If you performed the update OTA or otherwise circumvented the backup data, then you are indeed no chance.

  Good luck!