Movie Maker fails with general access denied error

Similar Questions

• Windows movie maker 2.6 General access denied error

  OK, I downloaded Director windows 2.6 for my computer windows vista... I did everything I could to fix the software and restarting the computer... How do I get windows 2.6 Director work? I.e. when I click on the shortcut on my desktop, that is to say the general access denied error... what should I do?

  Hello mercercountyairsoftarmy,

  After uninstalling Movie Maker 2.6, try the following.

  Check to see if there are any corrupt system files.
  Click Start
  Open an elevated command prompt.

  To do this, click Start, click programs, accessories principally made, right-click Guest, and then click Run as administrator.
  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.
  At the command prompt, type the following command and press ENTER:

  SFC/scannow

  This will check for any violation of the integrity and repair any damaged operating system files.

  Then restart your system.

  Pease refer to (KB) knowledge base article if you find corrupted files:
  Article 929833 - how to use the System File Checker tool to resolve missing or damaged on Windows Vista or Windows system files

  Then, go to the file setup.exe and select run as administrator.

  Please answer back with an update.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• WHS client backup fails with an access denied error

  I have a new laptop with Windows 8.1 on which I have installed the Windows Home Server 2011 connector and configuration backups for her. Backups fail at every attempt to return that an error prevented backup to create a snapshot of the volumes on this computer.

  The event log shows event ID 8194 by the following:

  The volume shadow copy Service error: error unexpected mark of the IVssWriterCallback interface. HR = 0 x 80070005 access is denied.

  . This is often caused by incorrect security settings in the process of the writer or the applicant.

  I tried to start the VSS service and tried the backup with the same result.

  The service runs with the same parameters the service runs on a computer that registers with success.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN

  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• IPL (direct load) with OGG 12.2 fails with MGR: access denied

  Hello

  I'm doing an initial load of a table (DB12c to DB12c) 12.1.0.2

  Connect the source in the root container and on the target PDB have been verified.

  I start the extract and it stops immediately. Here is the error I get from ggserr.log.

  ERROR OGG - 01201 Oracle GoldenGate Capture for Oracle, eload01.prm: error reported by MGR: access denied.

  2016-01-08 17:12:25 ERROR OGG - 01668 Oracle GoldenGate Capture for Oracle, eload01.prm: PROCESS ABENDING.

  Any ideas?

  Here is the file eload01.prm

  EXTRACT ELOAD01

  c##ggadmin@cdb1 username, password ggadmin

  sourcecatalog pdb1

  rmthost trg, mgrport 7809

  replicat rmttask, group rload01

  table soe.addresses.

  Please ask for more if necessary.

  Thank you

  dbaOnTap

  Did some research and found the answer to my own question.  Read about it here: Initial Direct load access denied to the Oracle GoldenGate 12.2 - my experiences with Oracle technology

• iDRAC 7 launch Virtual Console fails with access denied error

  Hello

  whenever I try to launch the idrac video console 7, it fails with an "Access denied" error it's weird because I'm connected to the idrac as superuser. I use JDK 1.6. I tried through different browsers and I still get the same error.

  Found the same problem after an update of the Firmware to iDRAC.

  To address I created a new user account and permissions of base. Seems "Access Virtual Console" even when checked permissions do not actually post update.

• Get the "Access denied" error when you try to play all video files in another folder on my external hard drive.

  A couple of days, I've had accidentally one of the folders slipped on my hard drive in the folder above him and was presented with the "Access denied" error messages when I tried the two a) reglisser it out & b) open it from the record she had been driven to (which was not a folder of my making that is a jibberish titled folder containing two .vdm files it contains first)

  After receiving advice of a friend, I did a restore from safe mode on the eve of the day when he moved and he did bring him back with all the files and files in the right place, but now I'm getting an access denied for each file, I try to play. Whether Real Player, Windows Media Player etc none will play.

  Just to test, I slipped a .avi file in the folder to see if he was going to play and he did it can be the folder settings, I'm just hoping that all these files are now not corrupted and unplayable as I have some 180 GB of data in this folder in more than 1000 files.

  Any help is very appreciated.
  Kind regards
  Haley

  Hey HRolston,

  What version/service pack of XP are you using?

  What format of your hard drive is formatted to?

  You can check the version/service pack:

  ·         Click Start

  ·         Right click my computer

  ·         Click on Properties

  ·         On the general tab, under System: you will see your information

  For example: Microsoft Windows XP Professional, Version 2002, Service Pack 3

  You can check what is the format of your hard drive is:

  ·         Click Start

  ·         Click on my computer

  ·         Right click on Local disk (c) (or letter that contains your operating system)

  ·         Click on Properties

  ·         On the general tab, next to file system: you will see the format of your hard drive (Fat32 or NTFS)

  Can't wait to hear back on your part.

  Steven
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Access denied errors on my music folder

  I'm having a problem with getting "Access Denied" errors on my files.  For example I can't access the 'My music' folder in C:\Users\\Documents\My music.   When I look at the properties of that folder, it shows that I have all the permissions.   Is there a solution to this?   A recent Windows Update may have caused a problem there?

  Hello

  1 - is this message pop up with all the files?

  Try to follow the steps below and check:

  a. Click Start, click all programs, and click Accessories.

  b. right click on command prompt, and then click Run as administrator.

  c. in the administrator of the command prompt window, type the following command and press on enter:
  takeown /F (file path)
  For example:
  takeown /F C:\Users\\Music

  d. now, type the following command and press ENTER:
  CACLS (file path) /G Administrator: F
  Note: Instead of the administrator, you can type your name of user account with administrator privileges.
  For example:
  CACLS C:\Users\\Music/g Microsoft: F (where Microsoft's user account with administrator privileges).

  e. restart the computer and test the issue.

  Refer to this link for more information: http://technet.microsoft.com/en-us/library/bb490872.aspx

• Steam.exe(main_exception):error:Delete of steam.exe failed, Win32 Error5 "access denied."

  I get the error that is displayed in the title line when you try to install the application of steam for the game Left4Dead. Just in case where the window title does not display the full error message:

  Steam.exe(main_exception):error:Delete of steam.exe failed, Win32 Error5 "access denied."

  My system specs are as follows:

  MB: ASUS P6T DELUXE Version2
  CPU: i7 950 QUAD-CORE 3.06GHz
  GC: XFX RADEON HD 4890 1 GB
  RAM: Patriot 12 GB Triple Channel Lat7
  HARD drive: WD VelociRaptor 150 GB 10K rpm
  HARD drive: Samsung Dual RAID Class 1 TB
  HARD drive: dual Seagate Barracuda 500 GB
  PWR: COOLMAX 1200 Watt
  CASE: Aplus Black Aluminum ATX Full Tower
  OS: Vista Ultimate 64-bit

  I checked my system and performed the following tasks to try to resolve the problem:
  My version of Windows is up-to-date. I have no problem hardware or exceptional driver. I tried to temporarily disable my antivirus to complete the installation, this does not solve the problem. I tried to install it as a system administrator. I searched the site of Valve/steam software for a solution, none were found (http://store.steampowered.com/). I searched the database of Microsoft for a solution, none were found. I'm having no problem with other games or applications that were loaded on that computer. The problem is only with the application steam.exe and any game that requires the application of steam to the function.
  I came across the following link which has promised to solve the problem;
  http://www.bing.com/search?mkt=en-us&q=steam%20error%20Win32%20error%205
  https://support.steampowered.com/kb_article.php?ref=5322-QYZB-5344  
  I followed the instructions at three times, all with the same error message.
  The default program is responsible for the following: C:\Program Files (x 86) \Steam.
  I tried to load the program on different hard disks and got the same error code.
  I have triple checked all user profiles to make sure that the appropriate privileges have been set (Admin). I checked all the steam program elements to ensure that they have been set to run as a program director executed. I double checked that proper TCP/UDP ports are open for the application of the steam function. http://www.resoo.org/docs/Counterstrike/steam_ports.html
  Any help to fix this would be greatly appreciated.

  Hello Platinum,
   
  Thank you for writing to Microsoft Vista Community Forums.
   
  This error is primarily caused by a lack of permissions for the user, having the Steam.exe file attributes set to 'Read only', or by another program interferes with the installation of Steam process (if the steam client application has been updated to a version that was not included in your package of Steam, Steam will download a new copy of itself and then delete the old file Steam.exe except when another program interferes).
   
  1. check your Windows user permissions.
  Please ensure that you are logged on as administrator on the computer that you use to install Steam.
  2. check the file attributes
  3. right click on the file Steam.exe, which was created after running the Steam Installer, and then select Properties
  4 uncheck the read-only box if it is checked and hit apply before closing the window
  5. try running the Steam.exe file once more
  6. check the settings of your security software
   
  If you are running an antivirus, firewall or any product safety program that may interfere with the removal and replacement of the file Steam.exe (some security software will check information of a file whenever it is changed and block the automatic replacement of files) Please check your settings for the program and ensure that you are prompted to authorize activities that may trigger the security software.
   
  Remove spyware, Adware and virus software and try to run the installation again.
   
  In addition to the steps above, follow these steps:
  1. go in C:/Program Files/Steam /.
  2. right click on Steam.exe and go to properties.
  3. click on the Compatibility tab.
  4. check run as administrator and click OK.
  5. then I deleted StemeTemp (or something like that. the steam icon).
  6. then run Steme.exe again.

  It will be useful.
   
  Thank you and best regards,

  Srinivas
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• error: ShellExecuteEx failed: Code 5 access denied trying to uninstall a 3rd party program.

  I was using a 3rd party appointed Start Menu Pro 7.8 program & wanted to uninstall, I use CCleaner for the same purpose, but when I tried to uninstall the program I got an error: ShellExecuteEx failed: Code 5 access denied. I've never had this error before, so was not sure of the cause of it... so I would like to know the reason for the error.

  Thank you

  Run the program with admin rights:

  http://Windows.Microsoft.com/en-us/Windows7/how-do-I-run-an-application-once-with-a-full-administrator-access-token

  Code 5 - access denied means that you don't have permissions to run the programs with rights of sweat standard.

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Just as a reference: how to FIX the annoying 'White Screen Of Death"with Silverlight and"Access denied"error with computer management.

  Well, I just hope that someone who has met these two mistakes will find my dose. It might save a lot of pointless research on the net.

  SYMPTOMS:
  -When you try to open a Silverlight application in your browser (Firefox, Chrome, IE, etc), your browser displays only a white area. When you right click on the white area, you can click on the Silverlight properties.
  -If you try to start "Computer management" by clicking on the 'My Computer' icon and select 'Manage', you get the following error: 'access denied '.

  CAUSE:
  The following errors are usually the result of a bad environment variable. In this case the "windir" environment variable does not work correctly. You can try running the management of the computer to start > run and entering:
  %windir%\system32\mmc.exe/s %windir%\system32\compmgmt.msc

  Notice the between the characters of percentage windir environment variable. If you run the above code, you will probably get an error saying that MMC cannot open the file. Look closely at the path, it's back!
  You will probably find any % somewhere.

  What actually happened here is the variable windir made reference to another variable: systemroot
  Why this creates problems, I'm not sure. Also, I don't understand what made then variable windir change.

  SOLUTION:
  -From your desktop or Explorer: right-click on "My computer" and select "Properties".
  -Click on the "Advanced" tab and then click "Environment Variables".

  http://pcauthorities.com/images/advanced-system-properties-XP.jpg

  -Did the windir variable. Together to "C:\Windows" do not think that it is already set to "C:\Windows", because windows then tells you. Double-click it to know for sure.

  http://www.adminxp.com/windowsvista/envvariabl.PNG

  -See, I told you! Change this to "C:\Windows".

  http://www.adminxp.com/windowsvista/editenvvar.PNG

  Hi Jooch,
   
  Thanks for posting such a detailed response, including symptoms, Cause, and resolution to "White Screen Of Death" with Silverlight and "Access denied" error with computer management"issues.
   
  I appreciate your time and effort to do the same. This could help other users of the forum as well.

• Vista Business machine linux three or four open via samba with her but is not open, single machine gives access denied error you have no right to open the message.

  Vista Business and Samba problem

  Dear all members,.

  We have a strange problem in Vista Business, three or four linux machine open with her samba but is not open that one machine, give access denied error that you have no right to open the message. Other business machine two vista also open all the linux with samba machine. If Linux doesn't side no problem. It is machine Rhel6.

  How can we it is resolved?  NTLM necessary samba settings in Vista business also. Strange because 3 open one machine is not open.

  Concerning

  Plantade
  India
  Ahmedabad

  Hello

  The question you have posted is related to professional level support. Please visit the below mentioned link to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/category/windowsvistaitpro

• I try to install the McGraw Hill software and get an access denied error message. I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  I try to install the McGraw Hill software and get an access denied error message.  I have contacted the software company, they tell me it's a compatibility issue with Windows Vista and to contact Microsoft.

  Right-click on the setup.exe > run as admin.

  See you soon. Mick Murphy - Microsoft partner

• Error creating registry key, RegCreateKeyEx failed; Code 5 access denied

  Just as the title says. I encounter and error where a program is unable to create a registry key. Error 5, access denied. I tried as admin and the problem still persists. I tried to run the registry editor and access, but still the problem persists.

  For the complete error message:

  HKEY_LOCAL_MACHINE/SYSTEM/CurrentControlSet/Control/MediaProperties/PrivateProperties/Joystick/OEM/V8/AXES/0ID_8888 & PID_030

  RegCreateKeyEx failed; Code 5 access denied

  I can retry, ignore, stop the program. I run Windows 7. It is a big problem for me because this PC is also to play games, can't really do this without my will.

  I solved the problem some time ago btu don't remember how. I think trying to let the program us firewall or try to disable all firewall and installed, I'm pretty sure something along these lines has helped.

• What to do with it? "cookies dir: cannot make the folder /cookies: Permission denied (error 13).

  What to do in this case?

  dir of cookies: can not make the /cookies file: Permission denied (error 13)

  Re: Installing Desktop Cloud Creative, but I got error 13 a permission on my MacBookPro question, why?

• Impossible to update of Windows Media Player and Microsoft Security Essentials and the error is "access denied error 80070005."

  Apparently an involuntary change of administrative privileges or permissions (Windows XP Pro, SP3) keeps me updated Media Player version 9 to 11 v. and updated virus Security Essentials definitions.
  For Media Player, wmsetup.log reports access denied error 80070005 and UpdSpAPI.log reports access denied for the HKLM\SOFTWARE\Microsoft\MediaPlayer\Settings\MP3Encoding\LowRate registry key. In regedt32, I'm blocked from display HKLM\...\MediaPlayer\Settings and below, and "are allowed to view the current permission settings, but... can make a change." Except that I can't. I can enter the change but get «...» Access is denied"trying to apply them. So this is the first problem that I need help.
  But of course it's more than a registry key and the subkeys, because MSE too is affected and will download but not install virus definitions. WindowsUpdate.log reports: failed to install with error 80070643.
  My user account (it's the only one!) is part of the Administrators group and all that I tried to verify administrative permissions is positive. This is a new issue. No virus/malware, according to MSE, Lavasoft Ad-Aware, MalWarebytes Anti-Malware.
   
  Original title: cannot update Media Player or Microsoft Security Essentials - access denied Erors

  Hello

  Question: Impossible to update Windows Media Player

  Run the Fixit and see if it helps.

  Difficulty video Windows Media Player and other media or from library (Fixit)

  Problem: cannot install Microsoft Security Essentials

  Perform the steps from the link below and see if it helps.

  I can't install Microsoft Security Essentials

  Hope this information helps.