moving items order after copy/paste

Similar Questions

• Folders and subfolders missing after copy/paste

  I was moving my photos in my usual folder of my temporary folder and suddenly most of the photos is missing after copy/paste

  and my subfolders in the folder image were also missing. When I checked the properties of the folder, all subfolders are always counted,

  but they are not found. Help, please.

  Thanks in advance,

  Just try to restart and copy and paste again. The ultimate solution for Windows. :-)

• How to find the file (EBS_R12) the OEL 5 after copy/paste Windows 7?

  People,
  
  Hello. I just installed Oracle Linux 5 as a guest at the top of VMPlayer operating system. The OS is Windows 7.
  
  I downloaded Oracle E-Business Suite R12 of delivery in Windows 7 in a folder (EBS_R12) on the screen of my laptop.
  
  In order to install EBS R12 Oracle Linux 5, I have copy and paste the EBS_R12 file in Oracle Linux 5 screen. The file size is about 50 GB. After coply paste was successful, I don't think where is the folder (EBS_R12) in the Guest OS Oracle Linux 5.
  
  Can any people tell me where is the folder (EBS_R12) in Oracle Linux 5 after copy/paste Windows 7?

  Hello

  After coply paste was successful, I don't think where is the folder (EBS_R12) in the Guest OS Oracle Linux 5.

  The copy succeeded.

  If Yes, then you can do the following

  #find / - name EBS_R12-type d - print

  (Assuming that you copied the folder 'EBS_R12', but not its content).

  Thank you

• Stroke in the wrong place after copy/paste in Illustrator CC

  Since the passage of the CS6 at CC, I have a problem of copy/paste, work of one Illustrator document to another.

  Sometimes features are in the wrong place as you can see in the screenshot below. On the left side I just copied a picture from another file I and lines appear at the bottom right where they should be (in this case it is not possible to select the lines "out of place". Moving all about what I selected moves around the misplaced lines, but they keep the same distance. The way I found for this problem is either doing "Contour lines" or to make the illustration more bigger or smaller. Which will appear automatically the features in place. If I can undo these changes traits remain in the right place.

  This seems to happen with illustrations that have been made to the CS6, but save the original file does not help CC; the problem is occurring. It also seems to occur to the traits that have a variable width profile. Features with a uniform profile remain in place. I had this problem in Illustrator CC on Windows and Mac, with various files that I created initially in CS6. It is quite annoying because I copy and paste a large number of these illustrations, so I find myself constantly having to do "Contour lines" and then "Cancel" to remedy. What can I do to prevent this?

  

  Please apply the latest patch 19.1 this should solve your problem.

  -Ashutosh

• Embed fonts disappear after copy paste

  Hi there gang.

  I have a dynamic text field that has built-in fonts. When I copy one file to another, the pasted text field loses its checkmark incorporated. I have to open the menu embed and reselect the embed appropriate keys. Any idea what could be the cause?

  The problem is that this text field is inside a component that many of my colleagues use several times / day in many assets. We just jumped to 4 CS5.5 and the text is now endangered. I have followed up to this problem, but don't know how to solve. There is NO reason for this dynamic text field should be a loser, it is incorporated... uh... ness!

  Any input appreciated.

  
  Thank you

  DP

  a built-in font is not 'attached' to the textfield (despite the fact that you can embed a font using the properties panel with the selected TextField).  the police is "added" to the swf.  you will see the police in the library of the swf file after incorporation correctly.

  so, if you move a textfield to a swf file, which fonts of the built-in textfield object of a swf file that does not have this embedded font, that textfield (and all other textfield in this swf file) will be there as a textfield that does NOT have this integrated police.

  for your situation, use a system font.

• CS5 Crash after copy/paste/drag

  when I copy and paste and try dragging the image, photoshop crash. I'm already updating my photoshop, someone knows how to fix this?

  Sorry my bad English = /.

  Updating your graphic driver and/or disable the OpenGL option in the prefs of PS. Quite clearly a problem with material mix of transparency through a low graphic material or a bad driver and configuration.

  Mylenium

• First CC 2014 - effects of copy/paste does not keep the stacking order

  As long as I remember first seems no honor or maintain the stacking order of the effects when you copy them from one clip to another. It is an absolutely huge issue as most people hone their audio and video effects on a clip of sample and then copy it to the other. But what is the point of this process, if the command paste rearranges the order of the stack of effects!

  For example, I usually use dynamic effects, EQ and Volume on my audio to add some compression and level my audio. Levels the dynamics takes as "input" is very important, so the effects of EQ and Volume are usually piled on after the results of the dynamic has spat. However, when I copy and paste my perfect order and parameters, dynamic still falls to the bottom of the battery that produces a very different audio result.

  Then I need to individually move the dynamic effect, return to the top of the pile on every single clip I pasted my settings from. It is a really horrible bug/oversight. While on the topic of bugs, when you add the 'Volume' to a favorite custom location effect, it seems not be able to be applied here on subsequent reboots of first.

  Or did I miss something in the process of copy/paste now regarding the stack of effects?

  Lance

  Exactly how do you copy and paste effects? Have you tried the Paste attributes command? How do you save a preset effects and which apply to the other elements?

• How to copy & paste several items at once?

  Original title: copy paste &

  I'm sorry if I ask this question in the right place. How to copy & paste several items at once? Recently, I learned how to copy & paste, which will give you an idea of my level of skills.  Thanks, Jim

  What you're trying to copy more than one? If you want to copy a few files or pictures for example, hold the Ctrl key and click on each one to highlight and then right-click | Copy all copy.
   
  To copy the contents of a folder, highlight one and Ctrl + A will highlight everything.
   
   
   

• Copy/paste via Remote Desktop broken after update 11/09/13

  Hello..

  As the title suggests, copy/paste via RD does not work after 11/09/13 patches. I uninstalled patches and still no joy. After looking around various solutions, I changed the associated paste redirection group policy and tried to launch rdclip.exe. I get

  "Windows cannot find 'rdclip.exe'. Make sure you typed the name correctly and then try again. »

  I use RD and paste on an hourly basis. Please advise and thanks in advance...

  Thanks, I found the answer here. One of resets of the KB "Local resources" options on a profile registered Rd and in the process deselects the Clipboard as a local resource. Clipboard simply re - select the fixed profile.

• Copy / paste don't work in Indesign after Psd/AI upgrade to 2015

  I made the mistake of upgrading photoshop and illustrator to 2015 CC. I no has not upgraded Indesign yet because Indesign has historically not well with earlier versions of Indesign. Now, I can't do the simple copy and paste operation. In fact, I don't think it was fair to InDesign, but I had some problems with photoshop, the inability to copy and paste to the other program (such as photoshop for IA/id). I can't recreate the bug of photoshop constantly copy paste, but the copy and paste since indesign is completely broken.

  Anyone else run into this or similar problems after the upgrade?

  UPDATE: I installed InDesign 2015 as well (while keeping the Indesign 2014 version and still, can not copy and paste. I should be more specific. I can cut, but it will not stick to anything (text, shapes, etc.). of in indesign. I can copy and paste to Notepad in indesign, but no indesign on. I can't copy a form in indesign and paste another in the same document (or different documents). I can use ctrl + click and drag to duplicate.

  My systems admin just walked by and I asked about the formatting of my machine, only the when he said there was an update of Microsoft 2 days ago what he just rolled back this morning.

  It was the fault of all Microsoft!

  So I just rebooted and everything works fine!

• copy / paste does not work in El Capitan

  Since the upgrade to 10.11.6 the functions copy / paste don't work, either by the keyboard shortcuts or the Edit menu.

  Then you have a bad installation.

  Try these in order to test your system after each see if it is back to normal:

  1. a. reset the PRAM and NVRAM on your Mac.

  b. Macs with Intel processors: reset of the controller (SMC) system management

  2. restart the computer in Safe Mode, and then restart again, normally. If this does not help, then:

  Boot to HD recovery: restart the computer and after the buzzer, press on and press and hold the

  Command and R keys until that Menu Utility screen appears.

  3 repair the hard disk and permissions: restart the computer and after the buzzer, press on and hold down the command and R until the Menu Utility screen opens.

  When the Utility menu, select disk utility, and then press the continue button. After loading disk utility select it

  indented (in general, Macintosh HD) entry of the list to one side.  Click first aid button in the toolbar. Wait for the operation

  is over, then quit disk utility and return in the Utility Menu.

  4 download and install OS X El Capitan 10.11.6 Combo Update.

  5 reinstalling OS x: reboot of HD recovery Select reinstall OS X in the Utility Menu and click on the continue button.

• Can not copy / paste from one folder to another.

  Just recently, I can't copy and paste a word document to a different folder, and my office is locked and can not move icons. I've unlocked settings, also tried to reconstruct the dates. Running advanced system of care. Creates a new user. Nothing works. My computer as most of the people is a tool and not used to play games, it's time to implement a different system, that is to say Windows 7 or wait 8. I honestly thought that XP Pro has been very stable and I have all the important issues in over 5 years, and in this case. This is the result of an update?

  Hello

  1 did you change your computer, after which the issue started?
  2. the issue of copy paste only occurs with Microsoft Word?

  Windows XP is still very stable and reliable. If you want to upgrade to Windows 7 or Windows 8, you can do it. It's a good idea to upgrade your operating system to get used to a new User Interface that would give you a new experience altogether.

  Follow these steps and check if the problem persists.

  Step 1:

  Test the issue in safe mode.

  Step 2:

  If the problem does not occur in safe mode, I suspect that there is a conflict of software of third party causing the problem to occur. I suggest that you start your computer in a clean boot State in order to eliminate conflicts of third party software.

  Note: The steps in the article to restart your computer as usual.

  Step 3:

   http://www.Microsoft.com/security/scanner/en-us/default.aspx

• How to copy/paste the text box anchor to its anchor text and remove all checkpoints empty?

  Hi all

  I have a document of a few pages, but a story. The right column is the area of main text and on many places, anchored text boxes are placed which appears on the left column, as shown below.

  I want the text of each text box anchor to cut of his place and sticking to its point of insertion/anchor and remove all of the empty boxes of anchored.

  I'm trying since this morning but I was able to get the anchor object reference. Any help on how to start with will be useful.

  Marie rosine

  

  OK, let's say you have a main text (not rooted) box and three text boxes that are anchored to the text it contains. One is anchored with text, the second is not anchored and the third argument is empty (I won't get into the anchor vs custom anchor line given that you mention in your message).

  Scroll us through the items on the page:

  function main(){
    var myDoc = app.activeDocument;
    var myPages = myDoc.pages.everyItem().getElements();
    for (var i = 0; i < myPages.length; i++){
    {
      var myPage = myPages[i];
      //Checks that the page is valid, and that it is not a master page. If either is true, skips to the next page.
      if (myPage.isValid == false) continue;
      if (myPage.parent instanceof MasterSpread) continue;
      var myItems = myPage.allPageItems;
      for (var j = 0; j < myItems.length; j++){
        //Current item.
        var myItem = myItems[j];
        //If myItem doesn't have a Character parent, it is not anchored.
        //The first and third text frames would fail this test.
        if (!(myItem.parent instanceof Character)) continue;
        //We only care about text frames.
        if (!(myItem instanceof TextFrame)) continue;
        //I think the only way this would happen would be if you had an image or
        //something else unexpected within the frame. I check for it so no content
        //is inadvertently lost.
        else if (myItem.texts.length > 1) continue;
        //If we're still in this iteration of the loop, all qualifications are met.
        //Flatten the text frame.
        //I don't use layers that often so, to me, flatten makes sense. You may want
        //to use a different term if there's a chance for confusion.
        flattenItem(myItem);
       }
     }
  }
  
  function flattenItem(funcItem)
  {
       //Hold onto the anchor character.
      var myParent = funcItem.parent;
       //Duplicate the text from within the frame so that it appears right after the anchor.
       //There may be other methods, but this works for me. I try to avoid copy/paste
       //so as not to deal with any clipboard mishaps. I added a check in case of empties.
       if (funcItem.texts.length > 0){funcItem.texts[0].duplicate(LocationOptions.AFTER, myParent.insertionPoints[0]);}
       //Replace the anchor character itself with a space (or whatever) which also
       //deletes the text frame it was anchoring.
      myParent.contents = " ";
  }
  

  I guess the takeaway is perhaps you aren't looking at the main text block and then check if anything it is anchored. You are watching each text block and find out if it is anchored. That's my approach, anyway.

• Copy paste does not

  I met a weird problem while working on 6 Captivate. I have a few items in my screens like, click box, text box, text entery and etc etc. And now I want to copy these standard objects for all other screens in my project. When I select all items and right-click > copy, it seems that it is copied. But when I switch to display desired and make right click > paste or press Ctrl + V, looks like it's been stuck somewhere, but not visible on the screen

  And this is the case most of the time but not always. I've tried restarting the app, reboot the system mmee, erase the folder hidden % tem. But nothing seems to work. It mite work tomorrow morning... You never know .

  Whenever it is long to set the properties of an object for each slide. So copy paste is a must.

  Can any that relate to this question a little bit and give me a few entries?

  Thank you

  Soumya

  After the update my Captivate 6 6.1, I have over this problem.

  Apparently, it seems, the simulations built in 6.1 captive and reopened 6 Captivate for editing, do not allow copying pastng business.

• Strange copy paste problem

  I encountered a very strange problem using copy and paste with CS4 (11.0.2). When I select all, move on to another image, copy and paste, the pasted image is moved in position!  As I've never met this problem before, I spent several hours trying to isolate the cause.  It seems to be limited to a particular image.  Although I have saved in several formats, as well with PhotoShop and other programs, the behavior is the same.

  Here is a link to the image:

  http://i164.Photobucket.com/albums/U28/VinceB_photo/VbTest2.PNG

  If you save this image as a .png and load it in PhotoShop, you will see that the background is transparent.  If I use the magic wand and a low tolerance to select the transparent part and fill it with an opaque color, the shift on the problem of copy/paste goes!  I tried to reproduce the problem by making a new image with a transparent background and shades of gray in an RGB image, but do not meet the displacement on the problem of copy/paste.

  For reference, the image is the diffuse map a sticker to be applied to another texture.  I wanted to copy on a layer above the normal map to check the size and recording.  I always wanted to do, but am frankly stumped.  Any help would be appreciated.

  EDIT: even if you do not know the solution, if you can load the image in PhotoShop, select all, copy and paste (to produce a copy of the original in a higher layer) and check that the two images do not register, which would increase the confidence of my mental health.

  Christmas is correct to diagnose the 'why' of this problem. If you copy and beyond the layer, it moves everything as you described... However, after a glance you can see that it moves to position the pixels copied exactly in the center of the selected space. You can check by repeating your process to duplicate the Maj... then select the original layer, Select All > Align Vertical centers > Align Horizontal centers. As you can see the works of original art now lines up perfectly with the pasted object. Photoshop is just centering the number given by a few pixels of the document or selection on the dough.