MS Calculator written (shows) two or more numbers with a single entry

Similar Questions

• I show two updates of security with a date of 1969 is that right

  I show two updates of security with a date of 1969 are those just my Fox fire beginning very slow very very slow

  This has happened

  Each time Firefox opened

  Is a month ago

  Firefox must have had a problem getting the time to update your system clock, and so the timing of this update is zero. Time (beginning of time) for Unix is 01/01/1970 midnight GMT, less your GMT offset - what makes 12/31/1969 and 2 to 6 pm on North America.

• two or more frame with fabric in cluster interconnect

  Hi experts

  I just want to confirm the proper way to connect two or more UCS 5108 chassis with a pair of interconnect fabric 6120xp clustered.

  I though that they should connect like this: the tissue Extender first of all chassis must connect on interconnection fabric A and second all chassis tissue Expander connects to the fabric interconnect b. as on the diagram here: https://supportforums.cisco.com/docs/DOC-5949

  However, I saw someone did: 1 chassis connects as I went through although above but for the 2 chassis, fabric Extender 1 connect to the B interconnection fabric and fabric fabric Extender 2 interconnect a. -

  can someone tell me which is appropriate/best practices? no reason the second chassis enjambment?

  Thank you

  Ming

  Ming, you must fix this implementation.  It's like ghostbusters: do not exceed the streams!

  Always systematically cable chassis fex to interconnection fabric.  Most common installation:

  Interconnection of fabric (primary) is connected to the hand (looking for the rear of the chassis) left FEX

  Fabric interconnect (subordinate) B is hand-bound straight FEX.

  Why?  You will get errors (can't be bothered them up!) and if you move a Service profile to a chassis to another chassis that is wired differently, it will not work (CNAs wired to different financial institutions, where the living are active / inactive = bad).

  PS - to change this, if I were you, I would like to turn off the entire system - fabric interconnects, chassis, everything.  then re-cable.  then turn on the fabric of the interconnections and chassis and check configurations are ok.

• two rows of back with a single column with just one place

  Hello all;
  

  I have a query that returns two rows similar to this below
  
  ID      PLACE            PROGRAM
  A       NEWYORK      PROGRAM A
  A       NEWYORK      PROGRAM B
  
  I would like this instead
  
  ID      PLACE             PROGRAM
  A       NEWYORK       PROGRAM A
                                 PROGRAM  B
  
  All help is appreciated. Thank you.

  Published by: user13328581 on March 22, 2011 11:52

  user13328581 wrote:
  WOW... Thanks a lot for Salomon, I never used the partitions and row_number in such a way... can you please explain your logic.

  Ensure that:

  ROW_NUMBER() over (partition by order of identification by location, program)

  This operation can take all the rows returned by the query andsplit them in compartments (sheet music) by id. Inside each bucket it order lines by program and place and assign line numbers. So for each row of the ID number 1 will be stored with (in alphabetical order) first place the first programt. And this is the line where we want to ID is displayed. That's why we wrap the analytical function that precedes in the CASE statement that will do just that. Now:

  ROW_NUMBER() over (partition by id, order by program)

  pretty much the same just bucket is a combination ID / PLACE. So for each combination of it, we want to show that for the first (in alphabetical order) programt.

  Now notice in the ORDER BY clause I prefix ID and PLACE with the table alias. You do it because otherwise the query alias ID and PLACE will have priority resulting in the incorrect sort order (remember that we cancelled all ID and PLACE with the exception of the number of line 1).

  SY.

• Two or more drives have the same name!

  Hi all

  In my wisdom, I created a server with multiple disks on multiple LUNS and now I want to replicate this server on my backup on a NAS drive.  When I try to reproduce this server I get the following error message (all other disc thin servers);

  Two or more records with the same name. These disks may not be replicated to the same location. You must configure replications of disc individually.

  I can't for the life of me see a way around this, unless I can rename the VMDK?   But it seems a bit risky...

  Any help much appreciated

  Stuart

  This should help you...

  Multi-disc about replication in a common directory with vSphere Replication | VMware vSphere Blog - VMware Blogs

• More help with analytical functions

  I had great hellp here yesterday and I need once more today. I guess I'm still not able to get a solid understanding of analytical functions. So here's the problem:
  table with 3 collars:
  product_id (int), sale_date (to date), count_sold (int) - each file show that the number of items have been sold for the product at a given date.
  The query should return the 3 passes of the table AND a fourth column that contains the date with the best sales of the product. If there are two or more dates with equal sales, the last being is chosen.
  
  Is this possible using an analytical function appropriately and without using a subquery?
  
  example:
  product_id, sale_date, count_sold, high_sales_date
  1, 01-01-2008, 10, 05/10/2008,.
  1, 2008-03-10, 20, 10/05/2008
  1, 10/04/2008, 25, 05/10/2008
  1, 10/05/2008, 25, 05/10/2008
  1, 01/06/2008, 22, 05/10/2008
  2, 05/12/2008, 12, 05/12/2008
  2, 06/01/2009, 10, 05/12/2008
  
  Thank you

  Hello

  Try this:

  SELECT     product_id
  ,     sale_date
  ,     count_sold
  ,     FIRST_VALUE (sale_date) OVER ( PARTITION BY  product_id
                                 ORDER BY          count_sold          DESC
                             ,               sale_date          DESC
                           )      AS high_sales_date
  FROM     table_x;
  

  If you would post INSERT statements for your data, then I could test it.

  Focus issue: Why use FIRST_VALUE with descending order and not LAST_VALUE (ASCending) ORDER of default?

• 30.0 Firefox is so slow since updated. IE & Chrome not having problems loading pages, showing the blank pages, need two or more tests to open Web pages.

  30.0 Firefox is so slow since updated. IE & Chrome not having problems loading pages, showing the blank pages, need two or more tests to open Web pages. It seems to have something to do with the Visual data on the pages. My MSN homepage gets old and dies every time I open the page after the re-opening and closing of firefox. It takes forever! What is a memory drain? Each open page in a new session of firefox suffer the same fate.

  Start Firefox in Safe Mode {web link}
  While you are in safe mode;
  Press < Alt > or < F10 > to display the toolbar.
  Followed;

  Windows; Tools > Options
  Linux; Edit > Preferences
  Mac; name of the application > Preferences

  Then Advanced > General.
  Find and stop using hardware acceleration.

  Dig safe web sites and see if there is still a problem. Then restart.

• Two (or more) mp3 files for a song? can I delete one of them?

  Hello world

  I use iTunes 12.4.3.1 on iMac with OS X El Capitan.

  I recently created a "parallel" to the MP3 playlist for a playlist with about 100 titles, because I need to burn it to CD. So far so good.  No doubt, I made some kind of mistake, and now I've discovered that, for each mp3 track have have two or more files.  They do NOT appear as duplicates.  Duplicates show two versions of the song, such as AAC and the other in mp3 format.  As in the following screenshot.

  

  But if I select the song mp3 (the one with 160 Kbps) and click on 'Show in finder' I get the following THREE files:

  

  The "right" one is that with time later and the '1' in the name, I know using the option "information" on the song.

  so now the questions are:

  (a) how it happened?

  (b) is it possible to find ALL these duplicates and delete them?

  (c) in the case, can I delete them manually without risk to my music library?

  I am relatively new to Apple, I will be grateful for all the advice

  Best regards

  Claudio

  (a) you can know with certainty, but my guess is that you have made a conversion like this before, and then deleted the new songs in the library after use, without deleting the corresponding files in the press kit at the same time. When iTunes tries to make a new copy by using the standard file naming scheme there is already a file it if it adds etc. '1' or '2' that required such file until it can make a new file name. (In some scenarios, it starts with "2" but I can't remember which).

  (b) use file > add to library, and select the iTunes Media folder. Anything not currently connected to iTunes is added to the library. Use file > library > show duplicate items > same Album to an exact replica of the list. Sort on Date added. Remove duplicates added only today. Send messages deleted to the trash.

  (c) see b). Manual removal is usually difficult and prone to error. You must be sure that the file you are deleting is not that the library is connected to. It may not always be apparent from the date or name.

  There are a set of circumstances in which multiple entries of the library can be connected to a single file. If there is a risk that this then some extra to take when removing care needs, but this is not a problem in the scenario described and the given solution addresses only the physical dupes who are in the media folder and are not currently connected to iTunes.

  TT2

• iTunes playlists show two different formats. Why is it so.

  iTunes playlists show two different formats. Why is it so.

  A playlist displays a blue screen with numbered songs and music before notation box provided for each song. The other playlist is predominently white numbered from each song and check the box. Why is it so and how both can be given.

  Use the view > view as menu from one of six different layouts. Ones you mention is Playlist and songs respectively.

  TT2

• Palindromic numbers consisting of the product of two 3-digit numbers

  Hello world. I am tring to find the maximum number of panlindromic with the product of two 3-digit numbers. A number of panlindromic is defined as one whose numbers are the same as its inverse. For example, 99799 is the same as its "99799" reverse

  I enclose my vi as follows. My idea is that I have find the largest number of panlindromic between 100 * 100 and 999 * 999 and then check if this number can be written as the product of two numbers 3-digit. Only when two conditions are met, the program returns the number. If one found does not work, then move us to the second largest number and check if it can be written as the product of two products 3-digit and so on...

  Therefore, I use a while loop a loop for the part to find the largest number of panlindromic and a forum to check the product.

  Somehow, my code does not work, so I think that if someone can give me a help.

  Question of fact of speed?

  Simply create a ramp of 100... 999 branch he and autoindex on two stacked FOR loops (automatic index once inside and once on the otuer loop). Multiply on the inner loop and test if it is a palindrome and conditionally autoindex on loop internal if it is. Concatenate the tunnel of the outer loop.

  Table 1 d conditions will have 2470 items (each element in double, half that). Find the table max to get 906609.

  Takes a fraction of a second. If issues of speed, there are many possible improvements (for example, we multiply twice most!, we only need to keep the current max in a shift register (not to accumulate all the items), etc.).

• The Windows Task Manager shows two instances of HpqPhUnl.exe running under XP

  My windows Task Manager shows two instances of HpqPhUnl.exe Runnung.

  * original title - why do I have two HpqPhUnl.exe race? *

  Are you using the quick change of user with more than one user connected and are both instances of HpqPhUnl.exe running under different user names?

  Although it is always possible for malware to masquerade as a legitimate file, HpqPhUnl.exe is related to the HP Photosmart Essential software provided with printers HP all-in-one.

  It seems there were several problems with Photosmart Essential and HP has replaced with HP Photo Creations.  HP claims, however, that he "supports" always Photosmart Essential.  See http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02475046&lc=en&dlc=en&cc=us&product=3857372

  If you have any problems and you're just curious, I suggest you leave the pretty well after scanning with the following just in case two free tools:

  MalwareBytes Anti-Malware
  SUPERAntiSpyware

  If you experience problems with your HP software - and the scans do not present any malware - I suggest to ask in the forums HP (there are 3: consumer, Business and IT resources.)

• Windows Movie Maker-how add two or more music/songs to different scenes in a film

  Director of Windows (audio / music), two or more pieces to add to the same film. a part of a song to be added as the Crter trim option but for music files

  1. how to add two or more music/songs on different places in a movie?

  2. do movie maker has the possibility to take part of a file of music/song to be added to a scene (like the trim option behind the scenes clip), for example if I imported an entire song but I need a specific part to be included in a scene, filmmaker support this or I need to do it on another software before in movie maker?

  1. how to add two or more music/songs on different places in a movie?

  2. do movie maker has the possibility to take part of a file of music/song to be added to a scene (like the trim option behind the scenes clip), for example if I imported an entire song but I need a specific part to be included in a scene, filmmaker support this or I need to do it on another software before in movie maker?

  ====================================
  The layer of the audio files on a single clip... Add an audio file...
  Save the project as a WMV video file, re-import the WMV
  film of the file and add another audio file.

  To save in a .wmv movie file...
  Type of... CTRL + P to open the movie recording Wizard.
  Choose... My computer.
  Next /.
  Enter a name and a location.
  Next /.
  ICT... "Best quality for my computer.
  Next /.
  Wait while the movie is saved.
  Finishing...

  To add a specific part of an audio file... divide and
  delete the unwanted part.

  "Split a Clip.

  Drag the video/audio clip to the
  Timeline.

  Read the video/audio by clicking on the
  "Play" button under the display screen.

  You will see the playback indicator
  (vertical line), advancing through the
  timeline.

  Click on the button "Pause" to the point
  where you want to split and type...
  CTRL + L or click the "Split" button to the
  at the bottom of the display screen.
  (you can also make adjustments to)
  Drag the playback indicator)

  Make splits as much as you want and
  remove unwanted in law clips
  Click on / delete.

  And... Movie Maker 2.1 one poster each
  another framework. To see all the images, the
  PapaJohn information suite may be useful:

  ===

  Movie Maker 2 shows you all-other-frame
  When you perform the installation of project. MM1 and film
  Machine running Vista show you each image.

  It is usually not a problem when ignoring him
  Middle managers, but sometimes you
  Note a flickering image in a clip that is a "stray,"
  and you can not see or cut it out.

  If you apply the Slow - Down - half video effect
  to an item in the timeline panel, you will see
  each image rather than everyone. You
  can see the frame problem and divide it out.
  Remove the effect of the clamp to return
  It's normal.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• two or more of the same connected printer?

  Got my new OfficeJet Pro 8630 a few days ago and installed on Windows 7 x 64 as a seamless wireless network printer.

  Last night, I noticed the 'install the device driver' dialog box pop up Windows. Since then, the HP utility 8630 informs me that I have 'two or more of the same printer connected' and asked me to choose:

  "HP Office Jet Pro 8630 (network)", and

  "HP9D41EB (HP Officejet Pro 8630.

  The first shows all the data that must be there when the HP utility appears (print, scan, fax); the second shows only the news 'Print '.

  In the window 'Printers and devices' CP, there is always only ONE printer, illustrated by default, named "HP9D41EB (HP Officejet Pro 8630".

  How can I get rid of the bad? I don't want to put my Windows Setup through uninstall and reinstall everything. I saw messages on this topic with different printers HP in Win 7 since at least 2011. Y at - it an explanation and a solution?

  Thank you

  JW

  It's what worked:

  I noticed that the name of the printer in the Windows "Devices and printers" was one of the two who gave information "printing" in the HP utility, so I clicked and was removed in "Devices and printers", leaving no HP printer at all.

  Then when I went back to the HP utility, it showed NO printer, but had returned to "connect A new printer. I did and it works very well - only one instance that shows the print, fax and scan as it should.

  Looks like Windows itself wants to detect the printer via a different driver.

  Thank you

  JW

• When I start my windows 7 laptop its showing two same username, but I don't see a single user, if I guset user also show two guset user

  When I start my windows 7 laptop its showing two same username, but I don't see a single user, if I guset user also show two guset user

  Hello

  I suggest you analyze your computer Microsoft Safety Scanner, it will help us to get rid of viruses, spyware and other malicious software.

  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

  More information: Difficulty of a corrupt user profile: http://windows.microsoft.com/en-US/windows7/Fix-a-corrupted-user-profile

  Hope this information is useful.

• CP7 - decimal points Show 4 (or more) for the user Variable?

  Is there a way to show the decimal points 4 or more for user variables?

  For some reason, I'm only show two decimal places for user variables in Captivate 7.

  Micky

  Fear, you need to use JS for that. How do you get the decimals?