two or more of the same connected printer?

Similar Questions

• Advice please reply to the message 'you have two or more of the same connected printer"

  I don't know what to do.  My new printer (Deskjet 3070) is configured to print wireless.  The display on the screen on the printer says that the wireless is connected.  The printer has printed its first two requests, successfully, but now I have a queue, and trying to access the problem, I found a pop-up window.   I don't know what choice to make.  I would be very grateful for advice.

  I am asked to choose between:

  HP Deskjet B611 3070 series (network)

  and

  HP03805A (HP Deskjet 3070 B611 series)

  If anyone knows what is happening here, that I should choose, and what I should have avoided doing in the implementation, I would appreciate your advice.

  I found a similar request, some time on this forum, but there was no response.

  Thank you!

  Choose the network version.

  You can verify that this is the right printer by clicking devices and printers. The other can be the usb connected version if you use the usb cable to install the software.

  The other is uninstall if displayed in the printers and devices dialogue box.

  

• WES610n two or more on the same WIFi network

  I have a router E4200 running a wireless network with a bridge of WES610n and an extension of Belkin dual-band range (which extends from the 5.4 ghz band), can I connect a second WES610n on the network without interference and loss of performance on devices on a network, on both the bridge of WES610n, the Extender of Belkin?

  You can connect a second WES610 to the network and it will work without interference, but there is probably a speed reduction because more devices will then share the bandwidth network. In some cases where there is interference, the router's wireless channel setting and moving devices can help avoid the interfering signal.

• Cursor of two or more with the same key value

  Is it possible to have a slider (c1) that has a key value that can be used in another cursor (c2)?

  See the example below:

  / * Sum of all economies where the amount is 50,000 or more * /.

  CURSOR c1 IS

  Select cusno, sum (savings)

  deposits

  Cusno group

  After having sum (savings) > = 50000;

  / * All customers in the system * /.

  CURSOR c2

  Select firstname, lastname, cusno, address, telephone

  of the customer;

  This, I would like to put in a file: all customer (from c2) information with economies falling into the first slider (c1).

  Is this possible?

  1 with cust_dep like)

  2 SELECT CUSNO, SUM (savings) DEPOSITS BY CUSNO GROUP TOTALS)

  3. SELECT c.firstname

  4, c.lastname

  5, c.cusno

  6, c.address

  7, c.phone

  8, d.totals

  9. customer'S c

  10, cust_dep d

  11 WHERE c.cusno = d.cusno

  12 AND d.totals > = 50000

  13 * ORDER BY c.cusno ASC

  SQL > /.

  FIRSTNAME LASTNAME CUSNO

  --------------- --------------- ----------

  ADDRESS PHONE TOTALS

  -------------------------------------------------- --------------- ----------

  John            Doe                      1

  123 main St. Anytown, USA 12345-123-456-7890 50000

  John Smith 3

  456 main St. Anytown, USA 12345 132-546-7890 58000

  SQL >

  SQL >

• Schedule of procedures of two or more in the same task?

  Hello everyone,

  I want to schedule a task using dbms_scheduler and I both procedures (one for serving newspapers AUD and the second for FGA). What is the best way to schedule only a single job that will run two procedures each month?

  Thanks in advance

  Honza

  In my opinion create job like that is not good. Management jobs as this very uncomfortable. Because of this that I am recommended create a main proceeding and call this working procedure

  ----

  Ramin Hashimzade

• Is it possible to calculate the number of two or more in the same field?

  What is trying to do is to caculate a number of pages of the book for a copy.

  For example I want to copy pages from 25 to 30, then the user will write 25-30

  the number of copies will be equal to sum = "30-25 + 1".

  and if the user write only a single number, the number of copies is equal "sum = sum + 1.

  Thus, user input will be like that "25-30, 45-60, 65, 67.

  I think using a table and one ',' split

  var sumArray = new Array();

  sumArray = sum.split(",");

  Y at - it all possible ways to do this?

  Thanx

  Hi, I think you can use a regular expression, but I would use a split as well, something like;

  var pageNumbers = TextField1.rawValue.split(",");

  var sum = 0;
  var isValid = true;
  for (var i = 0; i)< pagenumbers.length;="">
  {
  var pages = pageNumbers [i].split("-");
  Check for all elements of number
  If (! pages.every (function (element) {return (element == parseInt (element, 10)) ;}))}))
  {
  xfa.host.messageBox ("Please enter list separated by commas in number of pages, with a range separated by a dash, for example, 25-30, 45-60, 65, 67");
  isValid = false;
  break;
  }
  If (pages.length > 2)
  {
  xfa.host.messageBox ("Please enter a range of pages separated by a dash, e.g. \"45-60\ "" ");
  isValid = false;
  break;
  }
  If (pages.length == 1)
  {
  sum ++;
  }
  on the other
  {
  var start = parseInt (pages [0]);
  var end = parseInt (pages [1]);
  If (end<>
  {
  xfa.host.messageBox ("Please enter a valid page range separated by a hyphen with the start page in the first place, for example \"45-60\ "" ");
  isValid = false;
  break;
  }
  sum += (end - start + 1);
  }
  }
  If (isValid)
  {
  App.Alert (Sum);
  }

  Might need some more error handling but I hope will help you get started.

  Concerning

  Bruce

• How to connect and configure two wireless routers to provide the same connections across large areas?

  I have a big long House and prefer to use two wireless routers EA4500 to remote points to offer the same connections from one end to the other.

  How to make this wise (?) configuration

  @jcousie

  You can cascade two of them. Follow the steps on this link.

  Ann_18678
  Linksys technical support

• Windows Vista detects the wireless network but will not connect to it. Two other users in the same office connect without difficulty.

  The title says it all really.

  I was connected and working normally for about an hour this morning, until suddenly the connection has been lost.
  Windows detects the wireless network but will not connect. Two other users in the same office connect without difficulty.
  Help, please.
  Thank you.
  original title: vista detection network but will not connect

  Hi JulianBeach,

  1. you have made no changes to the computer before the broadcast took place?
  2. What is the exact error message you get?
  3 is connected to the domain of the computer?
  4. what happens when you try to connect to the network?

  Try the steps from the following link:
  Windows wireless and wired network connection problems
  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Additional information:
  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/wireless-networking-frequently-asked-questions

• IMessage Apple Watch has two interviews separated with the same person?

  My new Apple Watch has a problem with iMessage and I know how to fix this on my iPhone but not watch?

  On my iPhone, that my ID apple is connected to more than 10 devices and sometimes when a new device is added, it adds the addresses on my apple for iMessage and FaceTime ID and I always fix by unchecking the addresses that I don't want in the application settings under "Messages" and "FaceTime." However, this isn't the same thing to watch because there is no option in the settings on the Apple Watch and the watch App on my iPhone.

  I would like to help please?

  Hello

  Apple Watch uses the same parameters (for how you can be reached and how new conversations are started) for Messages as your iPhone.

  If you have two interviews separated with the same person, the following steps may help:

  • On your iPhone, check if there is more than one contact form in Contacts of this person (if so, remove duplicates).
  • Delete old Messages conversations with this contact on each of your iPhone and watch:
    • iPhone: app Messages > swipe to the left on a message thread > delete.
    • View: Open the Messages app (from the home screen, which is accessible by pressing the digital Crown) > swipe to the left on a message thread > tap on Trash / delete.
  • On your iPhone in the app Watch: Watch My > general > reset > press reset sync data:
    • You won't see anything happen after pressing it (the process runs in the background, invisible to the user).
    • Leave a minute or two to allow the course ends.
  • Restart your iPhone and your watch (turn the two together off the coast, then restart your iPhone first):
    • Restart your iPhone, iPad or iPod touch - Apple Support

    • Restart your Apple Watch - Apple Support

• I have 2 phones on my ID Apple how can I keep the two devices to receive the same iMessages?

  I have 2 phones on my ID Apple how can I keep the two devices to receive the same iMessages?

  How to use several devices iPhone, iPad or iPod with a computer

  Using more an iDevice on the same computer

  This mainly applies to couples who add another device and don't want their electronic mail, messages, etc. being duplicated on both devices. To start reading: How to use several iPhone, iPad or iPod devices with one computer. You must create a login separate Apple and password for anyone who will use the new iDevice. See Apple - my Apple ID and frequently asked questions about the Apple ID. The easiest way is to do it on the computer using iTunes: iTunes - how to set up an Apple ID iTunes.

  On the computer, create a new user account for the person with the new iDevice. This is the user account always uses this person. He or she will no longer use the other user account. This way the person will have a separate iTunes library. Note When finished, do not 'share' apps under a single Apple ID. Each of you must buy your own applications under your own Apple ID. When you decide to divide like this you will have to buy new applications they want to use.

  First, transfer the new devices to a new account as well as all your data.  Save pictures of flow picture you want to keep for your camera (unless they are already in the camera roll) by opening your Photos app, tap Albums icon at the bottom. Now press the album My Photo Stream; Press Select; tap the photo you want to select. tap the share (box with the face up arrow) in the lower left corner icon; in the film, and then click Save.

  If you synchronize notes with iCloud, you want to keep, you must open each of your notes and email it to yourself. Later, you can copy and paste the text into the new notes created in your new account.

  Tap Settings > iCloud > remove account (removes it only from this device, not iCloud; the person who maintains the current account is not affected) provide the password to disable find my phone and choose to keep on my iDevice when prompted.  Sign in with another Apple ID to create your new account. Choose merge to download your data.

  Once you are on separate accounts, you can each go to icloud.com and remove data from the other person to your account.

  The above was created by the user randers4. Changes were made to improve the readability and the syntax.

• How can I work with two icloud ID on the same pc?

  How can I work with two icloud ID on the same pc?

  Define "work".

  What exactly do you want to accomplish?

  You can use the iCloud Panel to connect to iCloud account and use a browser to go to icloud.com and sign in with another account.

• What happens when two parallel process call the same VI in an FPGA?

  Hi all

  I was wondering, what happens when say two parallel processes call the same Subvi in an FPGA? I think that the FPGA would create two instances of the Subvi, not sure. Any point of view?

  Thank you

  Altras

  I don't know if the FPGA adds any ordinary special, but in LabVIEW rule and in LabVIEW Real-time, a VI by default is not reentrant.  Therefore, a process that is called when it is already in use is blocked and must wait.

  If the VI is reentrant, however, then you have two (or more) for the VI dataspaces, so that each can run independently.

• Two background colors for the same waveform graph

  Hello guys!

  I have a question for you: I am a new user of labview, so please be nice!

  So here's the deal: I just created a thanks 4 thermocouple temperature registration program.

  In real time, I then have a waveform graph 4 curves as soon as I start my program. And in my program, I had a button that allows me to record the temperature in a file for a period of time at a certain frequency.

  So, what I have is: I got my chart of waveform with a black background for example, and once I pressed the button, the background color will be changed automatically to highlight the part of the graph where the record occurs, then the background will return to the black after finished recording. In this way, on the same graph, I could say that registration took place from here to there by looking at the graph. I have two different background on the same graph.

  I don't know how to change the background of a chart using the property node, but is it possible to do what I want?

  I hope I'm clear. Otherwise, feel free to ask me for more details... I might post my vi if necessary

  See you soon

  Well, I know this is not exactly what you want to do, but you can try the following.

  Change the color of the line on the chart when recording occurs.

  You could therefore have a red line, then press on save, then it turns blue, then back to red.

  And when that is confusing since you have 4 different lines on the chart 1,

  You can change to a red line and a dotted red line, for example.

  Would that be acceptable? If so, I can show you how to do this.

• Trigger two FPGA instances at the same time

  I have a basic FPGA code that transmits the bits of data on a serial (RS-485) bus, the code is written so that it expects in the first State of a machine to States in a single-cycle timed loop.  After a certain trigger, he begins to read a FIFO containing data and sends the data on a line of Tx.  It does this until all bits are send and then it goes back to the first State to wait for the next trigger.  The relaxation is necessary because windows must fill out first before the FPGA FIFO can start sending.

  I need two instances of this code runs, because I have two buses of com (one is redundant).  So I use the FPGA code as a Subvi and I wrote a main FPGA vi to call two separate instances of the Subvi in parallel.  A regular window vi wrote on the FIFO for bed FIFO for Rx and Tx.  No problems so far.

  The thing is I start two transmissions in 200nS of each other (Yes, nanoseconds).  Windows will write two FIFO in parallel, but the timing is 4uS apart, too long.  I tried implementing a Boolean flag in the Subvi FPGA, but windows can not write directly on the control of Subvi.  FPGA won't allow (the Write function is grayed out).  I tried to use a FIFO for a flag, but the problem is a race condition.  One of the instances is first read FIFO and he destroy.  The other can't read.  I need a common trigger point to be used by the two instances of Subvi.

  My final solution was to use a memory in the Subvi FPGA and digital control in the main FPGA vi.  Windows write in numerical order, it may because the control is in the main FPGA vi.  Inside the main FPGA, I run a timed loop that looks for digital to be zero.  If so, it writes the value into the location of the memory used by the Subvi FPGA.  After awhile, the principal wrote a zero back to memory to prevent the Subvi is restarted, as well as to write a zero for digital to reset.  This repeats, waiting for windows to write in digital again for the next transmission.

  I had to do it this way because sometimes I want to pass on the bus, and sometimes just one or the other.  Numeric values are used to determine which to pass on.  Now, the transmissions are starting to almost exactly at the same time, 1 or 2 nanoseconds apart.  But the trigger process seems very silly to me.  I was wondering if there is a better solution.  I'm pretty new to FPGA.

  tbob wrote:

  Basically, I did the same thing using FPGA memory.  Windows I am writing for a digital control that resides inside the main FPGA vi.  In the main FPGA, I write in the memory.  Inside the Subvi FPGA, I read the brief and decode the value to use either one or the other or both buses.  After fool with it for awhile, because reading Memeory needs to use a shift register (probably because it takes a whole cycle of clock), I had to work.  The two bus trigger at the same time.  I guess it's not really important if I use a FIFO or if I use the memory.  The main problem is that I write Windows at the hand of FPGA, then the hand of FPGA for the Subvi FPGA.  Then the time is right for what is the Subvi is.

  There are some advantages to the use of two FIFO on your approach.  First of all, you don't have the change of register for the memory location.  Secondly, we should not worry that VI is responsible for compensation to the memory location, or do, you run the risk that one of your subVIs run twice, or not at all, if the memory is not erased at the right time.  Perhaps most important, you'll save yourself space on the FPGA because you will not need arbitration - the additional code that is added when two parts of the FPGA try to access the same resource at the same time.  In your case, both instances of the Subvi access the memory block at the same time, so the FPGA compiler adds additional logic to avoid conflict.  If only read you the memory block in one place and just write it in one place (reading and writing can be different loops where subVIs) there is no need for arbitration.  Using two FIFOs, you can keep independent and avoid the conflict resolution code.  See the help for the "arbitration" for more details.

• Can I use two DSL modems in the same House at the same time?

  original title: DSL Modems

  Can I use two different DSL Modems in the same House for two different computers?

  If you want to use on the same connection that want to use on a different connection than Yes and no. But its best to check with your ISP.