MS visual C ++ 2008

Similar Questions

• Re: Cannot install Visual Studio 2008 on Vista 32-bit

  Hello

  I have a satellite P200 with Vista Home premium SP1 and I need to install it on Visual Studio 2008.
  When the install wizzard starts it checks the compatibility of the computer and could not return this:

  "Setup has detected that this computer does not meet the requirements to install this software. These conditions must be met before you can install Microsoft Visual Studio 2008 Professional Edition - ENU
  Requirements and software prerequisites
  Windows XP Service Pack 2 update information
  You must install this service pack to complete the installation. Visual Studio requires the installation of this service pack before you install Visual Studio"

  So the only solution I have is to exit the installation wizard, so I can not install VS2008

  It seems that someone else has the same problem with a Toshiba Satellite also! See http://forums.microsoft.com/MSDN-FR/ShowPost.aspx?PostID=3392455&SiteID=12
  Microsoft product support has apparently no solution and find it strange!

  So please help me, I absolutely need of VS2008 to work and I change my laptop only because failed to install VS2008

  Thanks a ton in advance for

  Pascal

  Post edited by: pfo69

  Hi mate,

  Sorry, but just because one person in a MSDN forum has randomly the same machine you, does not mean that there is a related problem of the machine. Technically in comparing it s absolutely the same material as in an office and so why Don t you contact Microsoft technical support?

  It seems that it is certainly unwanted Microsoft and has NOTHING to do with Toshiba hardware or software, so please see MS support sites or give them a call, because it s THEIR software which won´t operate according to THEIR operating system.

  Welcome them

• License with Measurement Studio and Visual Basic 2008 Express problem

  Hello!

  I have a license for the professional edition of studio measure 8.5 and I use the express edition of Visual Basic 2008.

  I am trying to use the FFTfunction, but get the exception {"NationalInstruments.Restricted.AnalysisLicenser is unauthorized."}

  Does anyone have an idea?

  Thanks in advance!

  Andreas

  Here is the full error message:

  System.TypeInitializationException wurde nicht Festival.
  Message = "Der Typeninitialisierer as 'NationalInstruments.Analysis.Dsp.Transforms' hat eine exception caused."
  Source = "NationalInstruments.Analysis.Professional"
  TypeName = "NationalInstruments.Analysis.Dsp.Transforms"
  StackTrace:
  BEI NationalInstruments.Analysis.Dsp.Transforms.RealFft (Double [] realData)
  EIB LDS. LDS_Form1.ButtonFFT_Click (Object sender, EventArgs e) D:\devel\LDS\pc\LDS\LDS\LDS_Form1.vb:Zeile 1700.
  bei System.Windows.Forms.Control.OnClick (EventArgs e)
  bei System.Windows.Forms.Button.OnClick (EventArgs e)
  bei System.Windows.Forms.Button.OnMouseUp (MouseEventArgs mevent)
  EIB System.Windows.Forms.Control.WmMouseUp (Message & m, MouseButtons, Int32 clicks button)
  EIB System.Windows.Forms.Control.WndProc (Message & m)
  bei System.Windows.Forms.ButtonBase.WndProc (Message & m)
  bei System.Windows.Forms.Button.WndProc (Message & m)
  EIB System.Windows.Forms.Control.ControlNativeWindow.OnMessage (Message & m)
  EIB System.Windows.Forms.Control.ControlNativeWindow.WndProc (Message & m)
  bei System.Windows.Forms.NativeWindow.DebuggableCallback (IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
  bei System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW (MSG & msg)
  bei System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop (Int32 dwComponentID, Int32 reason, Int32 pvLoopData)
  bei System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner (Int32 reason, ApplicationContext context)
  bei System.Windows.Forms.Application.ThreadContext.RunMessageLoop (Int32 reason, ApplicationContext context)
  EIB System.Windows.Forms.Application.Run (ApplicationContext context)
  BEI Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.OnRun)
  BEI Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.DoApplicationModel)
  BEI Microsoft.VisualBasic.ApplicationServices.WindowsFormsApplicationBase.Run (String [] command-line)
  EIB LDS. My.MyApplication.Main (String [] Args) in 17d14f5c-a337-4978-8281 - 53493378c1071.vb:Zeile 81.
  bei System.AppDomain._nExecuteAssembly (Assembly, String [] args)
  bei System.AppDomain.nExecuteAssembly (Assembly, String [] args)
  bei System.Runtime.Hosting.ManifestRunner.Run (Boolean checkAptModel)
  bei System.Runtime.Hosting.ManifestRunner.ExecuteAsAssembly)
  bei System.Runtime.Hosting.ApplicationActivator.CreateInstance (ActivationContext activationContext, String [] activationCustomData)
  bei System.Runtime.Hosting.ApplicationActivator.CreateInstance (ActivationContext activationContext)
  EIB System.Activator.CreateInstance (ActivationContext activationContext)
  BEI Microsoft.VisualStudio.HostingProcess.HostProc.RunUsersAssemblyDebugInZone)
  bei System.Threading.ThreadHelper.ThreadStart_Context (Object state)
  bei System.Threading.ExecutionContext.Run (ExecutionContext executionContext, ContextCallback callback, Object state)
  bei System.Threading.ThreadHelper.ThreadStart)
  InnerException: System.ComponentModel.LicenseException
  Message = "NationalInstruments.Restricted.AnalysisLicenser is unlicensed."
  Source = "NationalInstruments.Common"
  StackTrace:
  AT NationalInstruments.Restricted.LicenseBase.ShowUnLicensedBehavior (Type type, object instance)
  BEI NationalInstruments.Restricted.LicenseBase.a (String Type A_0, A_1, A_2 object)
  BEI NationalInstruments.Restricted.LicenseBase.a (Type A_0, A_1 object)
  AT NationalInstruments.Restricted.LicenseBase.RunTimeCheck (Type type, LicenseContext context, object instance)
  BEI NationalInstruments.Restricted.LicenseProviderBase.GetLicense (context, type, object, Boolean allowExceptions instance Type, LicenseContext)
  bei System.ComponentModel.LicenseManager.ValidateInternalRecursive (context LicenseContext, Type type, Object instance, Boolean allowExceptions, license, licenseKey, String & license)
  bei System.ComponentModel.LicenseManager.ValidateInternal (Type type, Object instance, Boolean allowExceptions, license & license)
  bei System.ComponentModel.LicenseManager.Validate (Type type, object instance)
  EIB NationalInstruments.Restricted.AnalysisLicenser... ctor()
  EIB NationalInstruments.Analysis.Dsp.Transforms... cctor()
  InnerException:

  Hi Andreas,

  It is scheduled for any Visual Studio Express edition, because these editions do not allow 3rd party integration. So, you will need to perform some additional steps to get a license to work properly.  Refer to the Measurement Studio for Visual Studio Express Editions support KB (in particular, paragraph 2 pointing you to our help).

  Best regards

• Measurement Studio for visual studio 2008 8.1.2

  Hello, I installed Visual Studio 2008 and I use the Visual C++ 2008 him.  However, Measurement Studio 8.1.2 (which I have) do not natively connect to VC 2008.  I tried to manually add the box controls to tools... but namespace NationalInstruments.UI.WindowsForms seems not to be there?  Maybe I need to change something somewhere?  Any help would be most appreciated.

  Defiance-

  If I understand correctly, you are trying to add references to assemblies .NET Measurement Studio for a C++ 2008 project. Is this correct?

  In this case, when you have created your project, you chose one of the models in the CLR (see screenshot) category?

  If so, then to add references to assemblies Measurement Studio, you go into the Visual Studio point Project menu > properties and select common properties > structure and references > add a new reference. MStudio 8.1.2 assemblies should appear in the list. If this isn't the case, you can navigate to them. They have installed by default on \Program Files\National Instruments\MeasurementStudioVS2005\DotNET\Assemblies\Current. Make sure that you add all required dependent assemblies (usually NationalInstruments.UI.dll and NationalInstruments.Common.dll).

  Also, you should be able to create a box Tools tab and add controls.

  If you try to do something else, could you give more details on exactly the type of project you want to create?

  David Rohacek

  National Instruments

• Tracing with Visual Studio 2008 works only the 1st time

  Hello

  I use Visual Studio 2008 and TestStand 4.1.1.

  I have a c# dll and I'll call a function of TestStand.

  In VS, I "join to deal with...". "and choose to attach it to TestStand. I start my sequence and VS to get to the point break that I set myself in VS.

  Everything is great.

  Now if I "Stop debugging", I do some changes for my dll, recompile all right and reattach to TS, everything seems ok.

  But if I start my sequence, do not strike my breakpoints and step runs without me trace in my c# code.

  The only workaround is to close TestStand, restart it, reopen the sequence and reinstall VS on it, then works again my breakpoint.

  What's wrong? I wouldn't restart TestStand whenever I do change the dll and reattach. I tried to unload all modules also with no success.

  I do something wrong or solutions to avoid restarting TestStand after changes to the c# code and you want to draw it.

  Thank you.

  Hi Matt,

  First of all, I tried to replicate what you experience following your instructions, but I couldn't recompile the DLL after the stop debugging in Visual Studio, because the DLL was still in use in TestStand.  After I unloaded all the modules, I could recompile.  I then re-attached and saw what you were doing.  So, to get around him, I tied to the process in a slightly different way.  In Visual Studio, I went to tools' attach to process, and then chose the seqedit.exe process.  Before mounting, I pressed the Select button on the right side of the dialog box in the middle of changing the type of code we are debugging.  Select the radio button "Debug these code types" and verify that "Managed".  This will ensure that the debugger attaches only to managed code (c#).  After I did, I could run my sequence again without having to restart TestStand.

  I would like to know if it works for you.

• Compile the external code with Microsoft Visual C++ 2008 Express Edition

  Hello

  I'm trying to compile c code to work with Labview (CIN or dll). In the past I did without problem using visual studio. I'm having a really hard time compiling the code with

  Microsoft Visual C++ 2008 Express Edition. I'm trying to compile one of the examples that come with Labview (multiply 2 numbers for example).

  I don't know how to set the project with Microsoft Visual C++ 2008 Express Edition. I read on the web something make a folder of lvm with Labview makefile. Is this really necessary? If so, how to create this file?

  Thank you

  Eyal

  Thanks for your reply.

  In fact, I found a way to create a dll on the web:

  http://decibel.NI.com/content/docs/doc-1690

• Visual Studio 2008 with Labview order, use of PlotWaveform commando

  Hello

  I want to use the Labview/CVI following commando: PlotWaveform in Visual Studio 2008.

  But I get a return-10 error when I try to use PlotWaveform.

  I use the following code:

  #include "stdafx.h".
  #include
  #include
  #include
  #include
  #include
  #include
  #include
  If (InitCVIRTE (0, 0,0) == 0)
  Returns - 1; Not enough memory

  int panelHandle is NewPanel(parentPanel,"Graph",top,left,height,with);.
  printf ("panelHandle: %d\n",panelHandle); ")

  int nNewCtrl is NewCtrl(panelHandle,CTRL_NUMERIC,0,10,10);.
  printf ("nNewCtrl: %d\n",nNewCtrl); ")

  DisplayPanel (panelHandle);

  int PlotWaveform_RETURN_VALUE = PlotWaveform (panelHandle, nNewCtrl, myArray, 4, VAL_DOUBLE, 1.0, 0.0, 0.0, 1.0, VAL_FAT_LINE, VAL_DOTTED_SOLID_SQUARE, VAL_SOLID, 1, VAL_RED);
  printf ("PlotWaveform_RETURN_VALUE: %d\n",PlotWaveform_RETURN_VALUE); ")

  RefreshGraph (panelHandle, nNewCtrl);

  When I run the program is the result:
  panelHandle: 1
  nNewCtrl: 2
  PlotWaveform_RETURN_VALUE:-10

  I get a graphic image but no graphics. And the frame that displays is not working properly.

  What is the problem with the function PlotWaveform, what is him Error-10 show ?

  BR
  Benjamin

  Benjamin,

  This error means that you place an order for wrong type for the function in question. And that's because you create a control of type CTRL_NUMERIC instead of CTRL_GRAPH or CTRL_GRAPH_LS.

  Luis

• Do not see the Option Measurement Studio Visual Studio 2008 project

  I just installed Measurement Studio 2010 sp1 for Visual Studio 2008, but I don't get the option Measurement Studio Visual Studio 2008 under any .net language project. I have to configure something else?

  Thank you

  I use the professional version of Visual Studio, and YES that's what I wanted. In fact just, I solved the problem by removing and then reinstalling Measurement Studio.

  Kind regards

• What is Measurement Studio 7.1 compatible with Visual Studio 2008?

  I'll be able to use v7.1 Measurement Studio with Visual Studio 2008, VB.net?

  Thank you

  Joe

  Hello Joe,

  Measurement Studio 8.5 was the first version using Visual Studio 2008, VB.NET.

  NickB

  National Instruments

• wink for IMAQdx Visual Studio 2008

  I am using the sample of component project in Visual Studio 2008, c# snap.  This is the sample project that came with the installation of the software OR.  When I try to capture an image of the camera, I get a message error "interface passed or the session is invalid '.  I checked my name of the interface of the software NOR and that's okay.  I have a Basler A601f camera connected via firewire.

  Any help would be great.  Thank you.

  Ah, which is why you must use IMAQdx to work with Firewire.

  I use mostly LabVIEW to program with IMAQdx, so I don't know what kind of examples are available. I recommend to install the latest version of the software for Acquisition of Vision to get the most recent examples shipped. You can check for errors in the forums or on ni.com.

• How can I download and install the Visual C++ 2008 runtime x 86 V 9.0.39729.01

  This shows that downloaded but not installed. I can't find where it is so that I can activate it.

  Hello

  ·         You receive a message to install Visual C++ 2008 x 86?

  ·         What operating system is installed on your computer?

  ·         Where have you tried to download this program?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: You can uninstall and reinstall Microsoft Visual C++ 2008 x 86 and check if that helps.

  Package redistributable Microsoft Visual C++ 2008 (x 86)

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=9B2DA534-3E03-4391-8A4D-074B9F2BC1BF&displaylang=en

   

  Method 2: If the problem persists after installing above package, the question must be a software problem. I suggest you take a cheque to boot this is a software conflict problem. If this isn't the case, it is always recommended to fix the problem with the support of the manufacturer.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

   

  Note: After troubleshooting, be sure to configure the computer to start as usual as mentioned in step 7 of the article mentioned above.

  Let us know if that helps.

• Who is the "end of support" of "Visual C++ 2005 SP1 Redistributable Package (x 86) 'and 'Visual C++ 2008 SP1 Redistributable Package (x 86)'?

  I work in a review of the life cycle of several microsoft products. "The information of ' Microsoft Support Lifecycle" web. But the end of support for the application dates "Visual C++ 2005 SP1 Redistributable Package (x 86)"and 'Visual C++ 2008 SP1 Redistributable Package (x 86)' I could find. "

  There is no any date end of support for this application?

  Thank you

  Hi Anto2,

  You can check out the following link and check.

  http://support.Microsoft.com/lifecycle/search/default.aspx?sort=PN&Alpha=Visual+C%2b%2b&filter=FilterNO

  Hope this information is useful.

• redistributablex869.0.30729.4148 Microsoft visual c ++ 2008

  my computer will not start normally because of an error regarding microst visual C++ 2008 redistributable x869.0.30729.4148. I tried to delete it, but it is said that he should not have been installed properly so it cannot be deleted. It says to contact the support team, but I have no answers. Is there anyone who can help me? Please

  Hello

  Download Microsoft Visual C++ 2008 Redistributable Package by using the link below and install it. Then find the issue. http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=9b2da534-3e03-4391-8a4d-074b9f2bc1bf&displaylang=en

  See also:
  http://Windows.Microsoft.com/en-us/Windows7/install-a-program

• Error 643 for update of security for Microsoft visual C++ 2008 Redistributable Package (KB973924)

  I try to install the update of security for Microsoft visual C++ 2008 Redistributable Package (KB973924) via windows update and get error 643.

  I ran the troubleshooting tool, but as usual, it does not solve anything (couldn't even understand something was wrong).

  I've tried searching for an answer but apparently 'error 643' is given for shit close to everything and I was unable to find a solution for my problem.

  the computer is running Windows 7 32 bit.  This problem also prevents Windows Essentials 2011 and I think that the issue is also what keeps me to install "Visual C++ Runtime for Dragon NaturallySpeaking 9.0", which gives me Error 1935.  I didn't chance to find a solution so that the error code is.

  Please help - thanks

  See the section "How to get help" of http://support.microsoft.com/kb/973924

  For individuals, please visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Buying to meet problems installing Microsoft security updates also can visit the following page for assistance: https://consumersecuritysupport.microsoft.com/

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• KB952241 for Microsoft VIsual Studio 2008 security update installs successfully... more and more and more (think of Groundhog Day)

  I have a machine on the domain that gets the same MS update to install whenever she connects.  KB952241.  She runs the update, Windows says "it's all good."  You restart and then she invited again to run the update even.  Thoughts?

  Please install the Visual Studio 2008 Sp1, which includes this fix and many other bugs too. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• If I uninstall Microsoft Visual C++ 2008 Redistributable - x 86 9.0.30729.6161 what happened?

  If I uninstall Microsoft Visual C++ 2008 Redistributable - x 86 9.0.30729.6161 what happened?

  Hi Muhamad,

  The Package Microsoft Visual C++ 2008 Redistributable installs runtime components of Visual C++ libraries required to run applications developed with Visual C++ on a computer that does not have Visual C++ 2008.

  This package installs runtime components of the libraries C Runtime (CRT), Standard C++, ATL, MFC, OpenMP and MSDIA. For libraries that support side-by-side deployment model (CRT, SCL, ATL, MFC, OpenMP), they are installed into the native assembly cache, also called WinSxS folder on the Windows operating system versions that support side-by-side assemblies.

  For more information, you can post your request in the MSDN forums.

  http://social.msdn.Microsoft.com/forums/en-us/vcgeneral/threads

  It will be useful.