wink for IMAQdx Visual Studio 2008

Similar Questions

• Windows Update has detected an error code 80200053 for the installation of the updates for the update of security for Microsoft Visual studio 2008 and 2010.

  Hello

  I received an update for security update for Microsoft Visual Studio 2010 (KB2542054) and the security update for Microsoft visual studio 2008 Service Pack 1 (KB 2538241). This updates have been detected by windows update on my laptop. However, when I tried to install these updates, they detect an error code 80200053, windows update encountered an unknown error. I need help with this ASAP. Thank you.

  Hello

  Step 1:

  You can read the following article and try to reset the Windows Update components and check.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Step 2:

  You can also check the links below and try to download and install the stand-alone package with updates:

  Microsoft Visual Studio 2010 RTM MFC security update

  Microsoft Visual Studio 2008 Service Pack 1 MFC security update

  Hope this information is useful.

• A security update for Microsoft Visual Studio 2008 Service Pack 1 XML Editor (KB2251487)

  Friends, y ' All must help me with that.

  I don't know all you Vista users know aware of the KB2251487 of security update.

  Told me all the time that I need to install this particular update. I click on install and after 72hrs, 365 days or something else, the installation is still stuck at 0%.

  1. It's bugging me to no end. I searched in the Microsoft forums for help on this topic and I tried all them; None of them work.
  2. I called Microsoft support even, but I was told that I will be charged $ 99.00

  I mean... come on!

  Could someone out there please help me out on this... for free?
  Please, I beg you!

  Thank you, I would really appreciate it!

  Hello

  1. you receive an error message/code when you try to install the update?
  2. what troubleshooting steps did you do to fix this?

  I suggest you follow the mentioned below of the methods.

  Method 1: perform the clean boot to see if you can install the update.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: after you perform a clean boot, perform step 7: reset the computer to start as usual from the article above.
  If the problem persists, follow the methods.

  Method 2: reset the windows update components.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058

  Registry warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  Method 3: download the update below and install it manually.

  First install Visual Studio 2008 Shell (integrated mode) with Service Pack 1 Redistributable Package from the link:

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=16480

  Then install Microsoft Visual Studio 2008 Service Pack 1 XML Editor Security Update from the link below:
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=26419#system-requirements

  Reference: Impossible to install updates in Windows Vista, Windows 7, Windows Server 2008 and Windows Server 2008 R2
  http://support.Microsoft.com/kb/2509997

  Registry warning

  To do: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756/

  Warning of Chkdsk.

  Important: When running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data can be lost.

  See also the link: http://social.msdn.Microsoft.com/forums/en/vssetup/thread/c87d70ab-b536-4cf8-a7eb-f78764bf8b3f

  Hope this helps!

• KB952241 for Microsoft VIsual Studio 2008 security update installs successfully... more and more and more (think of Groundhog Day)

  I have a machine on the domain that gets the same MS update to install whenever she connects.  KB952241.  She runs the update, Windows says "it's all good."  You restart and then she invited again to run the update even.  Thoughts?

  Please install the Visual Studio 2008 Sp1, which includes this fix and many other bugs too. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Measurement Studio for visual studio 2008 8.1.2

  Hello, I installed Visual Studio 2008 and I use the Visual C++ 2008 him.  However, Measurement Studio 8.1.2 (which I have) do not natively connect to VC 2008.  I tried to manually add the box controls to tools... but namespace NationalInstruments.UI.WindowsForms seems not to be there?  Maybe I need to change something somewhere?  Any help would be most appreciated.

  Defiance-

  If I understand correctly, you are trying to add references to assemblies .NET Measurement Studio for a C++ 2008 project. Is this correct?

  In this case, when you have created your project, you chose one of the models in the CLR (see screenshot) category?

  If so, then to add references to assemblies Measurement Studio, you go into the Visual Studio point Project menu > properties and select common properties > structure and references > add a new reference. MStudio 8.1.2 assemblies should appear in the list. If this isn't the case, you can navigate to them. They have installed by default on \Program Files\National Instruments\MeasurementStudioVS2005\DotNET\Assemblies\Current. Make sure that you add all required dependent assemblies (usually NationalInstruments.UI.dll and NationalInstruments.Common.dll).

  Also, you should be able to create a box Tools tab and add controls.

  If you try to do something else, could you give more details on exactly the type of project you want to create?

  David Rohacek

  National Instruments

• Another version of microsoft visual studio 2008 has been detected in this system must be updated for sp1. What to do next?

  The complete error message that I receive is less when I try and install SQL Management Studio on a PC running Windows 7 64 bit running SQL Server 2008 R2. The only point is that Visual Studio is not installed then, how can I update something that is not installed in the first place. At the end of the day, I'm trying to install SQL Management Studio so that I can recover my backup of clients.

  Another version of microsoft visual studio 2008 has been detected in this system must be updated for sp1. Please update all installations of visual studio 2008 sp1 by visiting Microsoft update

  My mistake

  

  Programs installed

  

  Hello

  Please read the following support article:

  https://support.Microsoft.com/en-us/KB/956139

  Maybe you have the Visual Studio Tools for Applications 2.0 installed.

  In addition, you can get a quick response with SQL Server related questions in the following forum:

  https://social.msdn.Microsoft.com/forums/SQLServer/en-us/home?category=SQLServer

  I hope this helps.

  Kind regards

  Alberto Morillo
  SQLCoffee.com

• Memory minimum allocation for Vista Business Edition with Visual Studio 2008 VM?

  Long time listener, first time caller...

  Please excuse me if this question is answered somewhere else, I tried from Google and it came only with a response that was sort of what I was looking for, but was specific to a Macbook with Fusion...

  I want to create a Vista Business Edition (SP1) virtual machine with Visual Studio 2008 (which I think also is delivered with SQL 2005 Dev Edition) and I was wondering what the minimum memory allocation should be for this in order to make it work properly?

  Thank you

  Jim

  Hello and welcome to the forums.

  Amount of minimum support from Microsoft for Vista Business is 512 MB and 768 MB or more recommended for Visual Studio.  1280MB is the minimum.  Personally, I do not want anything less than 2 GB to a virtual machine with Vista and Visual Studio - 1 GB each.

  One of the great benefits of virtualization is that you can start this virtual machine with 1.5 GB and try it.  If the memory is not sufficient, then it is simple to give another 0.5 GB to the virtual machine and try again.

  Good luck!

• Re: Cannot install Visual Studio 2008 on Vista 32-bit

  Hello

  I have a satellite P200 with Vista Home premium SP1 and I need to install it on Visual Studio 2008.
  When the install wizzard starts it checks the compatibility of the computer and could not return this:

  "Setup has detected that this computer does not meet the requirements to install this software. These conditions must be met before you can install Microsoft Visual Studio 2008 Professional Edition - ENU
  Requirements and software prerequisites
  Windows XP Service Pack 2 update information
  You must install this service pack to complete the installation. Visual Studio requires the installation of this service pack before you install Visual Studio"

  So the only solution I have is to exit the installation wizard, so I can not install VS2008

  It seems that someone else has the same problem with a Toshiba Satellite also! See http://forums.microsoft.com/MSDN-FR/ShowPost.aspx?PostID=3392455&SiteID=12
  Microsoft product support has apparently no solution and find it strange!

  So please help me, I absolutely need of VS2008 to work and I change my laptop only because failed to install VS2008

  Thanks a ton in advance for

  Pascal

  Post edited by: pfo69

  Hi mate,

  Sorry, but just because one person in a MSDN forum has randomly the same machine you, does not mean that there is a related problem of the machine. Technically in comparing it s absolutely the same material as in an office and so why Don t you contact Microsoft technical support?

  It seems that it is certainly unwanted Microsoft and has NOTHING to do with Toshiba hardware or software, so please see MS support sites or give them a call, because it s THEIR software which won´t operate according to THEIR operating system.

  Welcome them

• Tracing with Visual Studio 2008 works only the 1st time

  Hello

  I use Visual Studio 2008 and TestStand 4.1.1.

  I have a c# dll and I'll call a function of TestStand.

  In VS, I "join to deal with...". "and choose to attach it to TestStand. I start my sequence and VS to get to the point break that I set myself in VS.

  Everything is great.

  Now if I "Stop debugging", I do some changes for my dll, recompile all right and reattach to TS, everything seems ok.

  But if I start my sequence, do not strike my breakpoints and step runs without me trace in my c# code.

  The only workaround is to close TestStand, restart it, reopen the sequence and reinstall VS on it, then works again my breakpoint.

  What's wrong? I wouldn't restart TestStand whenever I do change the dll and reattach. I tried to unload all modules also with no success.

  I do something wrong or solutions to avoid restarting TestStand after changes to the c# code and you want to draw it.

  Thank you.

  Hi Matt,

  First of all, I tried to replicate what you experience following your instructions, but I couldn't recompile the DLL after the stop debugging in Visual Studio, because the DLL was still in use in TestStand.  After I unloaded all the modules, I could recompile.  I then re-attached and saw what you were doing.  So, to get around him, I tied to the process in a slightly different way.  In Visual Studio, I went to tools' attach to process, and then chose the seqedit.exe process.  Before mounting, I pressed the Select button on the right side of the dialog box in the middle of changing the type of code we are debugging.  Select the radio button "Debug these code types" and verify that "Managed".  This will ensure that the debugger attaches only to managed code (c#).  After I did, I could run my sequence again without having to restart TestStand.

  I would like to know if it works for you.

• Visual Studio 2008 with Labview order, use of PlotWaveform commando

  Hello

  I want to use the Labview/CVI following commando: PlotWaveform in Visual Studio 2008.

  But I get a return-10 error when I try to use PlotWaveform.

  I use the following code:

  #include "stdafx.h".
  #include
  #include
  #include
  #include
  #include
  #include
  #include
  If (InitCVIRTE (0, 0,0) == 0)
  Returns - 1; Not enough memory

  int panelHandle is NewPanel(parentPanel,"Graph",top,left,height,with);.
  printf ("panelHandle: %d\n",panelHandle); ")

  int nNewCtrl is NewCtrl(panelHandle,CTRL_NUMERIC,0,10,10);.
  printf ("nNewCtrl: %d\n",nNewCtrl); ")

  DisplayPanel (panelHandle);

  int PlotWaveform_RETURN_VALUE = PlotWaveform (panelHandle, nNewCtrl, myArray, 4, VAL_DOUBLE, 1.0, 0.0, 0.0, 1.0, VAL_FAT_LINE, VAL_DOTTED_SOLID_SQUARE, VAL_SOLID, 1, VAL_RED);
  printf ("PlotWaveform_RETURN_VALUE: %d\n",PlotWaveform_RETURN_VALUE); ")

  RefreshGraph (panelHandle, nNewCtrl);

  When I run the program is the result:
  panelHandle: 1
  nNewCtrl: 2
  PlotWaveform_RETURN_VALUE:-10

  I get a graphic image but no graphics. And the frame that displays is not working properly.

  What is the problem with the function PlotWaveform, what is him Error-10 show ?

  BR
  Benjamin

  Benjamin,

  This error means that you place an order for wrong type for the function in question. And that's because you create a control of type CTRL_NUMERIC instead of CTRL_GRAPH or CTRL_GRAPH_LS.

  Luis

• Do not see the Option Measurement Studio Visual Studio 2008 project

  I just installed Measurement Studio 2010 sp1 for Visual Studio 2008, but I don't get the option Measurement Studio Visual Studio 2008 under any .net language project. I have to configure something else?

  Thank you

  I use the professional version of Visual Studio, and YES that's what I wanted. In fact just, I solved the problem by removing and then reinstalling Measurement Studio.

  Kind regards

• I need a copy of Visual Studio 2008 while I have the same version of Crystal Reports that are used by one of my clients.

  Buy Visual Studio 2008

  I need a copy of Visual Studio 2008 while I have the same version of Crystal Reports that are used by one of my clients.

  Can I buy Visual Studio 2010 with MSDN Essentials and then download and use Visual Studio 2008

  Hello

  Welcome to Microsoft Windows 7 answers Forum!

  Thank you for visiting the Microsoft answers Forum.

  The question you posted would be better suited in the MSDN Forums. I would recommend posting your query in the MSDN Forums

  MSDN forums
  http://social.msdn.Microsoft.com/forums/en-us/VSX/threads

  I hope this helps.

• Visual studio 2008 error message"unable to start the program C\user\...\debug\example14.exe" the system cannot find the specified folder

  im working on a project in visual studio 2008, and once I hit the compilation does his usual thing and then all of a sudden I get the error message

  Cannot start the program (file location)

  the system cannot find the specified file

  I tried to install other UN and re install visual but without success

  Help, please!

  Repost nicely in the Forums on the link below:

  http://social.msdn.Microsoft.com/forums/en-us/category/VisualStudio, vsarch, vsdbg, vstest, vstfs, vsdata, vsappdev, visualbasic, visualcsharp, end

  Visual Studio General forums

  They will help you in the Forums above.

  See you soon.

  Discuss programming techniques, best practices and development issues for all versions of Visual Studio.

  Mick Murphy - Microsoft partner

• Microsoft Visual Studio 2008 SP1 end of Support

  Hi all

  I am designing a Microsoft Visual Studio 2008 SP1 for Motorola MC3200 Scanner solution at hand and would like to know the end of the support for this product.

  Could you please help here?

  Thank you

  Anurag

  All time life Visual Studio load Dates - https://support.microsoft.com/en-us/lifecycle/search?sort=PN&alpha=Visual%20Studio

  For VS2008 - https://support.microsoft.com/en-us/lifecycle/search?sort=PN&alpha=Microsoft%20Visual%20Studio%202008&Filter=FilterNO

  Hope this is the info you wanted.

• When you try to run a Visual Studio 2008 program under Task Scheduler, it still gives a return code of 3762507597.

  Original title: lack of Task Scheduler

  I am trying to run a program in Visual Studio 2008 under Task Scheduler. We ran the program under scheduled tasks

  in Windows XP without any problem. When it is running under Task Scheduler it always gives a return code of 3762507597. If I run

  the Task Scheduler program, it works fine. Task Scheduler running as administrator and run the program with

  Run with the highest privileges... For any help or suggestion would be appreciated...  Thank you

  Hello

  Thanks for the updates.

  Because this problem occurs on systems of your company, the question you posted would be better suited for the IT Pro TechNet public. I would recommend posting your query in the TechNet Forums to get help:

  Windows 7 TechNet Forums general

  Let us know if you need help with Windows related issues. We will be happy to help you.