MSCOMCTL. Error dependence OCX trying to install FLAC frontend

I get the following error message when you try to install the frontend FLAC on Windows 7 (64-bit):

Component 'MSCOMCTL. OCX' or one of its dependencies is not correctly registered: a file is missing or invalid.

If the file exists in Windows 7 and how to replace / fix? This is a new install of 7, so I'm quite angry if it gets corrupted somehow already.

It is a long story so I will not try to recreate it here.

Summary:

-MSCOMCTL. OCX is a set of commands of 32 bits provided with the Microsoft Visual Basic 6.0 programming environment
-FLAC frontend is written in Visual Basic 6.0 (apparently, I don't use the FLAC)
D ' use controls of 32 bits as MSCOMCTL. OCX on the 64 bit version of Windows 7, they must be installed and registered in: C:\Windows\SysWOW64 to run in the emulation environment "WOW [Windows Windows]".
-On my Windows 7 64-bit installation, I found MSCOMCTL. OCX already present in the C:\Windows\SysWOW64 directory, I don't know if its there by default or if I installed something that was placed there for me.

-If you go to your C:\Windows\SysWOW64 directory and see MSCOMCTL. OCX already in it then try this:

Access your shortcut to command prompt via start all programs accessories command prompt-->-->-->. Right-click on the command prompt icon and select run as administrator.  Click Yes to say UAC you really want to run it.

When the black window opens with your command prompt, type this in:

CD C:\Windows\SysWOW64

The command prompt should change to: C:\Windows\SysWOW64

Then type:

regsvr32 mscomctl.ocx

If you get a window that appears and says "DllRegisterServer in successful mscomctl.ocx" then click OK and try frontend install again.

---

If you see NO MSCOMCTL. OCX in C:\Windows\SysWOW64 already, then you must he get there, save it and then install frontend.  It is the longest part of the story that I suggest you look here http://www.hydrogenaudio.org/forums/index.php?showtopic=52353&st=0 for more information because many have had your problem.

Read through these posts that talk about what people have done to get the mscomctl.ocx file, and how they did run on Windows 64-bit (Vista in most of the examples, but should be similar to 7).

You could also look for a different interface to FLAC which is not written in Visual Basic 6.0 and works with Windows 7 x 64.

Tags: Windows

Similar Questions

  • Try to install FLAC Frontend in Windows 7 64 bit, but get error message

    Hello

    Tried to install FLAC Frontend but get this error message...

    The Module MSCOMCT2. OCX was loaded but the call to DllRagisterServer failed with the error 0x8002801c code.

    I looked online and saw tips for Vista that said to try to run Setup in administrator mode.  I tried and failed with error

    The module MSCOMCT2. OCX was not able to load. Make sure the binary is stored at the specified location or debug it to check for problems with the binary files or dependent.dll.  The module is not found.

    Seen elsewhere on run CMD in administrator mode and typing in what follows - regsvr32 \windows\system32\MSCOMCT2. OCX - hit enter, but I get the same error message as I do run the installer in administrator mode.

    I see some online have got it working using the method above, but it could be that I'm not because it is a 64-bit Windows 7 installation?

    The file can be found here

    http://members.home.nl/w.Speek/FLAC.htm

    This was taken from another forum to help. This solution is simple and works.

    > The only thing that has solved this problem for me installs the following:

    >>

    http://www.Ascentive.com/support/New/libraryfiles.exe

    >>

    > treadmill Syswow64, not the System32.

    WHEN THERE YOU ASK WHERE YOU WANT TO INSTALL THE FILES

    REPLACE "System32" with "SysWOW64".

    Install FLAC Frontend and it will load smoothly.

    Enjoy and enough bickering. Moderators, please be more useful than a verification of the compatibility lists and say ' well, if she's not here, then go the manufacturer! That is poor it helps and is to say "We will NOT help you."

  • Encountered the error 80070003 while trying to install the update of security for Windows 7 for x 64-based systems (KB2286198)

    I tried to install the update several times, but I get the same error every time ' encountered error 80070003 while trying to install the update of security for Windows 7 for x 64-based systems (KB2286198).

    I tried to use products different a.v. to search for the virus, the male ware, kits root and found nothing.

    Ran the update without any firewall or AV program running and still received the same error.

    AMD Turion 64 X 2 Mobile, Windows 7 Ultimate 64, 4 GB ram, 42 GB of 110 GB of free space on the drive, 4 GB page file.

    Hi a93svtf,

    This problem occurs when some files in the update are missing, even if the update is downloaded and extracted successfully.

    Step 1: Run the fixit available in the article below

    You receive an error '0 x 80070002' or '0 x 80070003' code after you download an update from Windows Update, Microsoft Update or Windows Server Update Services

    http://support.Microsoft.com/kb/910336

    Step 2: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Now, try to install the update

    Thank you, and in what concerns:

    Ajay K

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Context: MSI Action failed, 0xC0070643 error code when trying to install AVG anti-virus program

    Original title: context: MSI Action failed

    Hello: I received the 0xC0070643 error code when trying to install the AVG anti-virus program.   What can I do to fix this problem, so I have AVG on my computer?   I thank really all those who are knowledgeable enough to help me straighten out it.

    Thanks again

    Daphna

    Hello

    1. are you able to install other applications successfully?

    According to my research, this error message appears if you have traces of a previous installation of the AVG software.

    Download the AVG remover to remove the previous version and then try the installation again and check.
    http://www.Avg.com/us-en/utilities

    Hope this helps

  • Error code: 0x800F0826 - trying to install service pack 1 for vista

    Error code: 0x800F0826 - trying to install service pack 1 for vista

    It comes with Vista, upgrade install and activate Forum.

    You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon.

    Mick Murphy - Microsoft partner

  • get a 646 error code when trying to install updatesfor Securty Excel 2007 - KB973593, Microsoft junk email Filter (KB977839); Microsoft Word 2007 (KB974561) and Microsoft Office System (KB973704)

    get a 646 error code when trying to install updatesfor Securty Excel 2007 - KB973593, Microsoft junk email Filter (KB977839); Microsoft Word 2007 (KB974561) and Microsoft Office System (KB973704)

    http://www.Microsoft.com/downloads/en/default.aspx

    Put the KB numbers in the search at the above link > manual download them.

    If this does not solve it:

    Windows Update Forum:

    It comes with Vista, upgrade install and activate Forum.

    You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

    http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

    When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

    In this way, you will receive the best help.

    See you soon.

    Mick Murphy - Microsoft partner

  • Received this error code when trying to install win 10. the message was ' ' has no 1 update "and"windows update has encountered an unknown error."

    Original title: error code 88982F04

    Received this error code when trying to install win 10.   the message was ' ' has no 1 update "and"windows update has encountered an unknown error."  I have win 7 Home premium SP1 running on a desktop HP Pavilion p7-1210 PC.  Can someone please help with an answer.

    Thank you

    Delete C:\$WINDOWS.~BT

    Open the C:\ drive, and then delete the folder: C:\$WINDOWS.~BT and then restart your computer, and then try to upgrade again.

    If the upgrade of Windows 10 Assistant becomes blocked or unresponsive to different percentages: 0%, 32%, 62%, 87%, 99%, please wait at least 4 to 7 hours. If the installation program does not progress, close the wizard and restart your computer. Follow the instructions to upgrade manually by using the tool of creation of media or file ISO for Windows 10.

    If you find it difficult to do some of the steps below, please see instructions how do their:

    http://windows10forum.com/blogs/entry/3-How-to-ensure-a-smooth-upgrade-to-Windows-10-anniversary-update/

    If you encounter an error about enough space to perform the upgrade, see the instructions:

    How to install Windows 10 on devices with limited space

    Task of pre-required

    When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

    Retry the upgrade manually:

    Option 1: Using the media creation tool

    Download the media creation tool

    Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

    Note: How to check if you are downloaded or installed the update Windows 10 November

    Select upgrade this PC now and then click Next

    Option 2: upgrade using the file ISO for Windows 10.

    Task of pre-required

    When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

    then

    then

    • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
    • Reboot several times, and then try again.
    • Disable the general USB peripherals (for example - smart card reader). You can do so from the Device Manager.
    • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).
    • Support your default BIOS reset BIOS.
    • Check if there BIOS updates available for your system, and then to apply them.
    • If you are using a SCSI drive, make sure you have the drivers available for your storage on a USB device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
    • Perform a clean boot, restart, and then try again.
    • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
    • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
    • If this does not work, try using the. ISO file to upgrade if possible.
    • If you are connected to a domain, go to a local account.

  • Error 1053 while trying to install a printer.

    * - Original title - error 1053

    Tried to install the new printer on Windows 7 OEM OS. Put it on CD, you click on run and immediately got error stating: (abbr.). Print spooler Windows was arrested. Start the print spooler service. I click Start stressed after the highlight of print spooler in Services.  Immediately receive error 1053: could not start the print spooler. Service has not responded to the request in a timely. Attempted to fix by downloading the Microsoft .NET Framework 1.1 Service Pack 1 hotfix. Tried 4 different patches that were made to work for Windows 7. Everyone says this system not covered with this patch.  Without other options, any solution?

    Hi man 3D.

    I understand that you can not install a printer. I'll help you with this problem.

    1. What is the brand and model of the computer?

    2. What is the brand and model of the printer?

    3. have you made changes on the computer recently?

    4. what security software is installed on the computer?

    Method 1.

    Open the printer Troubleshooter: http://windows.microsoft.com/en-US/windows7/Open-the-Printer-troubleshooter

    Method 2.

    Install a printer: http://windows.microsoft.com/en-US/windows7/Install-a-printer

    Method 3.

    Solve printer problems: http://windows.microsoft.com/en-US/windows/printer-problems-in-windows-help#fix-printer-problems=windows-7&v1h=win8tab1&v2h=win7tab1&v3h=winvistatab1&v4h=winxptab1

    Method 4.
    You can run the Microsoft Safety Scanner to make sure that the computer is virus-free.

    Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

    Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

    Method 5.

    I suggest that you can exercise SFC scan and check if that helps. The SFC/SCANNOW command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

    For more information how to make SFC / scan, please follow this link: http://support.microsoft.com/kb/929833

    Try these steps and let us know the status so that we can help you.

    Thank you.

  • Hi, receive error message: Error 1935 when trying to install adobe photoshop elements 11. An error occurred during the installation of Assembly component {9F81AF1-0E47-DC99-A01F-C8B3B9A1E18E}. HRRESULT:0 X 80070057. Can anyone help? I use windows Vista an

    Hi, receive error message: Error 1935 when trying to install adobe photoshop elements 11. An error occurred during the installation of Assembly component {9F81AF1-0E47-DC99-A01F-C8B3B9A1E18E}. HRRESULT:0 X 80070057. Can anyone help? I use windows Vista and the DVD is to this system. May this be the cause?

    Error 1935. Assembly Microsoft.VC80.CRT component | Install | Adobe Creative Suite 5.5, CS5, CS4 | Windows

  • Exit code 7 and error 1603 when trying to install acrobat pro DC.

    Exit code 7 and error 1603 when trying to install acrobat pro DC. What's wrong? I run windows 7.

    Exit code: 6, Exit Code: 7 Installation error - http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html

    The problems with the Setup logs. CS5, CS5.5, CS6 - http://helpx.adobe.com/creative-suite/kb/troubleshoot-install-logs-cs5-cs5.html for more information on how to review your Setup logs

    Error 1603. Install | CS5 products: http://helpx.adobe.com/creative-suite/kb/error-1603-install-cs5-products.html

  • Windows update error 800705B 9 tries to install the client update

    Try searching for updates using windows update, he invites me to install new windows update client software and close and reopen this.
    I click on install now

    It closes and after 20-30 seconds, it appears with windows not can find new updates with error code 800705B 9.

    I have also tried to go to update.microsoft.com but also comes up with error saying: "this Web site has encountered a problem and cannot display the page you are trying to view. The options below may help to resolve the problem. »

    He said also below: "more on measures to be taken to solve this problem (error number 0 x 80070002) yourself."

    I also tried to download the windowsupdateagent30 - x 86 .exe and tried to install, but an error code (B 800705, 9)
    also tried in safe mode.

    I also tried download Windows6 system update readiness tool. 0-KB947821-v4 - x 86 which installs successfully but client update still does not work.

    I looked in your forums and newsgroups without result.

    Help, please.

    concerning

    John Aziz
    Operating system: Windows Vista SP1

    Johnny,

    This fix is a little strange, but it works.  There is a patch of mshelper.de which I think is the Denmark.  In any case, the solution is in Danish or in another language.

    The link is:

    http://download.mshelper.de/mshregs/winUpdRestore! v27.exe

    When you open click on the button marked "be."
    Then click on Installieren

    A screen gray pop up, begin to reset all the settings of windows update.

    At the end a green screen comes press the letter 'J', and then press ENTER.  It's asking you if you want to open the windows updates.  I always say yes/Ja.

    As I said this is a weird solution but it worked every time I've never used it.

    Let me know if it works for you

    Jeff B.

  • Error 646 when trying to install updates

    Original title: error 646

    When you try to download updates it allows updates to day run but unable to install, read error646

    Hello
     
    What updates you trying to install?
     
    If it's in what concerns Microsoft Office updates, refer to the article below to solve the problem.
     
    Code error '0 x 80070646', '646', or '1606' when you try to install the Office updates. (Click on fixit)
    http://support.Microsoft.com/kb/2258121

    Aziz Nadeem - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • Error (-5006: 0x8000ffff) trying to install Roller Coaster Tycoon 3 Platinum on Vista.

    I know that RCT3 Platinum is an Atari game that no poster not taken in charge by Vista but I spoke with many people who are able to properly install and play. I tried their support and received no response as well as to aid their forums that I am hoping to find some help here. As soon as I click on the setup.exe to install from cd I get a screen InstallShield Wizard brief then immediately after an error stating "an error (-5006: 0x8000ffff) occurred during the execution of installation. Once the error screen is closed all the other screens nearby installation and that's it. I tried to install as administrator and with XP, 2000, 98, 95 & compatabilities but without success. I have an Intel Core 2 Quad Q6600 2.4 GHz processor with Nvidia GeForce 9500GT video on Vista home premium SP2. Any suggestions with this would be greatly appreciated. Thank you.

    Hi Quaker13,

    Thank you for using Microsoft Windows forum

    We have no information about compatibility. So, we will not be able to help a lot. When a game is not compatible or does not know compatibility then the program may or may not work on the operating system.

    See the link below that supports the theory
    http://www.Microsoft.com/Windows/compatibility/Windows-Vista/details.aspx?type=software&p=roller%20Coaster%20Tycoon%203%20Platinum&v=Atari&UID=&pf=0&pi=2&s=roller%20Coaster%20Tycoon%203&OS=32-bit

    Contact the manufacturer game for better support

    Kind regards
    Aziz Nadeem - Microsoft Support

  • Receive error error: 0x0000007B while trying to install Windows XP.

    Help! I can't install XP! Blue screen of death every time?

    I am trying to install Windows XP Pro on an old hard drive from the laptop, beforehand I had it wiped, partitioned in two and made a NTFS format partition.

    I use a computer without a hard drive to install XP, the drive of the laptop is connected using an external hard drive box.
    The Windows XP computer on I use is a netbook without cd/dvd drive, that's why I use another computer to get windows installed first.
    The first installation is going well. I select the formatted partition I want XP must be installed. The files are copied from the XP CD on the hard drive. Then a restart occurs. The XP loading screen appears, but before the loading bar comes alive I get a blue screen.
    I tried to install 3 times now, each failure at the same point. I don't know what to do now?
    Error: 0x0000007B (0xF78A2524, 0xC0000034, 0x00000000, 0x00000000)

    Windows XP is not designed to be installed on an external hard disk... only an internal hard drive.  What you need to do is to buy an inexpensive netbook external optical drive so you can install Windows XP directly.  Here is an example: external optical drive

  • error 0x8080CBB1 when trying to install Windows Xp

    I tried to install Windows Xp when all of a sudden a blue screen with error message "IRQL_NOT_LESS_OR_EQUAL" with the code STOP: 0x0000000A (0x00000002, 0x00000000, 0 x 00000065, 0x8080CBB1) rises and impossible to complete the installation.

    Hello

    This problem may occur if there is incompatible hardware or an incompatible device on your computer driver.

    Refer to this article for help:

    Error message "Stop 0x0000000A Irql_Not_Less_or_Equal ' during the upgrade to Windows XP
    http://support.Microsoft.com/kb/311564

    See also:


    You receive an error message "Stop 0x0000000A" in Windows XP
    http://support.Microsoft.com/kb/314063

    Kind regards
    Afzal Taher
    Microsoft technical support engineer

Maybe you are looking for