MSINWINPC - FBW files and restore, backup Dec 2009 concerns, concerns given PC June 2011

Similar Questions

• After backup files and restoring Windows XP, I can't open the files backed up.

  After backup files and restoring Windows XP, I can't open the files backed up. The files are password on a user account. I know the password. But the message received when you try to open them is: access is denied. Drag / drop the files in 'Shared files' result in the same message. I know that the files exist, because when I open backup and browse for them, they are displayed. Is there a method to open? I have Windows XP Media Center Edition, Version 2002, Service Pack 3 update. I tried to back up the files with backup of backup, but it does not work.

  Hi error,.

  I suggest you follow the article in the Microsoft Knowledge Base and check.

  How to capture a file or a folder in Windows XP

  http://support.Microsoft.com/kb/308421

  I hope this helps.

• The bkf files: How can I now open the file and restore my files under windows 7?

  I did a backup on my old computer using the backup program that is under system tools in windows xp. How can I now open the file and restore my files under windows 7?

  See the Description of the Windows NT backup utility restore utility for Windows 7 and Windows Server 2008 R2

• I have a question about the time machine. I recently updated my Quicken 2015 and there was something wrong with the update. Can I go back in just the Quicken file and restore it until I downloaded the update do I have to restore the entire

  I have a question about the time machine. I recently updated my Quicken 2015 and there was something wrong with the update. Can I come back in all the Quicken file and restore from time Machine before I downloaded the update to do, I need to restore the entire computer?

  Yes, you can just restore this file or application. Use Time Machine to back up or restore your Mac - Apple Support

• Win 7 backup and restore, backup configuration does not work.

  Win 7 Home Premium Backup and restore, backup configuration does not work. I tried "clean boot", turned off all non-Microsoft services, pc restarted, Setup backup does not always work. When I click on the configuration backup, just open a Windows Explorer window in the System 32 folder. That's all. What now?
  Thank you
  Mark

  This problem is caused by a 3rd party shell extension. To identify the incriminated extension, use ShellExView.

  "When you click on"Set up backup"or click on"Change settings"in Windows 7 backup and restore, nothing happens or open the System32 folder."
  Follow method 2 in this page: http://windowsxp.mvps.org/slowrightclick.htm

• 0x8007001b with Vista Home Premium Center backup and restore backup failure

  I have my Toshiba Satellite M205-S7452 with Vista Home Premium for about 8 months, and November 2007, backup windows, and restore program worked flawlessly. I was able to back up my music, photos and documents to a DVD on a regular basis. But then I started having an error halfway back up that says "drive cannot find the sector requested" with the 0x8007001b error code. It seems that the backup works partially - there are files on the DVD player but I don't know if it ends or not. I tried to do some research on Google and it seems that there is other people affected by this error, but I could not find suggested patches.

  Hi jennielah,

  Please use the Forum of the community for Vista.

  If it has started, use the system restore back to a point before you start. See below for instructions.

  If you can do that I have a work around you. Your specific error seems to relate to update failures, not only the Windows updates but the various failures of update.

  The job is to save it to your hard drive and copy the files on the DVD after the fact.

  I hope this helps.

  Please let us know if we can do something else.

  The System Restore tool

  Other troubleshooting methods, such as using the System File Checker tool, cannot solve the problem. If they do not resolve the problem, and the problem you are experiencing started occurring recently, you can use the System Restore tool. Using this tool, you can restore the computer to an earlier point in time.

  The tool using System Restore may not necessarily help you determine the problem. The System Restore tool uses points of restore to return the system files and settings to an earlier point in time. You can use it to restore the operating system to a point in time where you have not experienced the problem. When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  To restore the operating system to an earlier point in time, follow these steps:

  1. Click Start , type system restore in the Search box, and then click System Restore in the programs list.

  If you are prompted for an administrator password or a confirmation, type your password or click continue .

  1. In the System Restore dialog box, click choose a different restore point , and then click Next .

  2. In the list of restore points, click a restore point created before you started having the problem, and then click Next .

  3. Click Finish .

     The computer restarts and system files and settings are back to the State they were in when the restore point was created.

  Here is a link to the system restore, if you would like more information

  http://support.Microsoft.com/kb/936212/

  Matt Hudson
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Music and video through the center of backup and restore backup

  Vista Home Premium Centre of backup and restoration of claims that music and video files can be saved on CD or DVD. The structures of folders are created; However, the folders are empty. I disabled McAfee and tried with the same result. Can video and music files (mp3 and wma) be backed up by the backup center and restoration? Thank you.

  Hi ChicagoExPat,

  Make sure that the disks are writable, which means that you can add, remove, or modify the content. If you decide to use this method and have a lot of files to backup, be sure to have enough disks to complete the job. The back up files Wizard you indicates how much space you need whenever you perform a backup and recommends the type of media to use.

  For more information, please visit the following links:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/methods-for-backing-up-your-files

  Hope this information is useful.

  Jeremy K

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• can not find restored files after restoring backup hard drive

  I had a problem with my computer so I reset my PC back to factory setting. Before doing anything, I backed up all my documents/pictures in an external hard drive.

  After successfully resetting my PC to factory setting, I ran restore backup files... I took me 4 hours to restore. Restore files has been a success.

  When I restart my PC, I couldn't find anything my back upwards. I don't know that there have been restored as I have only 50 G to 200G left of my C drive.

  I tried to look for documents, but I can't find anything.

  What happened to all my backup files?

  Hello

  Where you are restoring the data?

  Check if the files are hidden.

• Control files and spfile backup automatic backup fails

  Hi all
  
  I use Oracle RAC 11 g ASM 2. My database is 2 knots RAC1 and RAC2.
  
  I take the RMAN database backup ASM diskgroup (FRA) and RAC1 and RAC2-mounted network file system. I have this requirement backup also outside the DSO.
  
  I put: set UP the CONTROL FILE AUTOBACKUP ON;
  I'm runing the node RMAN backup task 2 (RAC2)
  
  I am facing the error when taking a backup to the network file system. below
  

  Starting Control File and SPFILE Autobackup at 08-SEP-12
  RMAN-00571: ===========================================================
  RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
  RMAN-00571: ===========================================================
  RMAN-03009: failure of Control File and SPFILE Autobackup command on ORA_DISK_1 channel at 09/08/2012 18:20:06
  ORA-00245: control file backup failed; target is likely on a local file system

  How would I fix this?
  
  Kind regards

  Hello

  Please take a look at the document MOS * RMAN backup fails with Ora-00245 and Rman-08132 [1365484.1 ID] *.

  Snapshot must Controlfile location on a location shared between the nodes.

• Windows Backup and Restore, backup failure, 0x8078002A__

  New computer e5410 dell laptop with windows 7, drives external usb different two (backup), the two iomega, different models.

  When I run backup on windows machine 7, backup takes place up to the ~ 60% complete then omits to say 'backup did not complete', even failure for the two usb drives.

  I look at the info screen on. He gets in the "system image" and then fails. Failures are consistent with 57-60% when the failure occurred, in the three times I was able to watch it, it always happens when "creating system image" appears on info.

  I tried both drives usb on windows machine 7 and both fail. Tried both drives on windows xp computers (2), and both work.

  IMHO, it's a problem of windows 7 but I have been wrong before. I am far from a guy from the computer if the specifications are welcome.

  any help appreciated.

  Dean

  Log name: System
  Source: Service Control Manager
  Date: 22/01/2011 16:35:38
  Event ID: 7001
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: E5410laptop
  Description:
  NTRU TSS v1.2.1.29 TCS depends on the TPM Base Services service which failed to start because of the following error:
  The operation completed successfully.
  The event XML:
  
   
     
      7001
      0
      2
      0
      0
      0 x 8080000000000000
     
      12660
     
     
      System
      E5410laptop
     
   
   
      NTRU TSS v1.2.1.29 TCS
      TPM Base Services
      %%d Ko
   
  

  Hi John,.

  To answer your question:

  I got about 50 systems on the network. They are on a domain, and I have a mix of Win 7 and 8.1.

  Win7 systems seem to be the problem.

  The Solution I found pending...

  The share for each user folder must be created by the system of the user in question. This sets the special folder permissions. (Originally, all sharing of backup folders had created by the domain administrator... It did not work. ) Once the user has created the folder in the sharing and the backup configuration has been created, and the domain administrator credentials are defined. The backups worked perfectly.

  If another error occurs at this point, I ran a chkdsk /f on the system and after that no problem remains.

  All backups are now working properly.

• VMware CBT (tracking changes block): ctk files and multiple backup systems?

  Hello

  We have 2 datarecovery running backups of the SAME virtual machines, but on the other day.

  Later, we will have a dedicated backup solution, so we will use only 1 VDR + external backup system.

  The external backup system use CBT too.

  Now my question is: how CBT done when several backup systems require "that is the last blocks changed since the last backup?

  I mean if I run Sunday, on the same VDR2, VMs and VDR1 Saturday to VDR2 always have only the changed blocks from Saturday to Sunday and the blocks changed the week lack? !!!

  Could someone provide me a technique explaining the depth of the CBT mechanism?

  Thank you

  Yes, once a block is modified the corresponding location in the mapping file is labeled with the new changeID.

  André

• Check the log file and restore doubt

  Friends,
  
  My db is 9iR2...
  the PB is mode archive...
  last file from archive has been ar000300.arc at 10:40...
  I'm copying the latest file to archive at 11:00...
  the last file to archive is always ar000300.arc...
  the next file to archive is not yet generated...
  My question is...
  If I use this file restoration (arc000300.arc) cannot get the data until 10:59?
  or how late I'll get the data?
  
  Thank you

  Yes, you can do a manual switch to aid

  alter system switch logfile; on the production of databases and apply this archivelog to get the data.

  Anand

• Why can I not see the files I back up by using the backup and restore of Vista

  Can someone help me?  I have a Dell Inspiron 1525 and implemented backup and restore feature Vista so that every Sunday he automatically backs up my computer to my external drive.  I was on the computer when he said it starts up and that upward was completed successfully.  I assummed everything was fine until today when I show my father my drive external and noticed that none of the backup of files were there... or at least I did not see them.  The only files on the disk were the ones I put manually on here from my old computer.  I then ran a manual upward using Vista and again it says backup successfully completed.  I then watched the external hard drive and once again no new files.  The strange thing is the back up and restore program shows all the dates he has saved and also allows me to restore files from the back to the top.  To do this, I deleted a file I didn't really need out of my hard drive and then is gone to restore program and found the file and restored.  Problem is that the program does not say where he makes the file from.  What is going on?  Are backup files of certain types of hidden file I don't see unless I use the backup and restore program under vista?  I am currently running Vista Home Premium on a 32 bit system and the external hard drive I have is a Western Digital My Book Essential Edition.

  Windows backup is stored in a folder with the same name as your computer.  Open a command prompt and type echo %ComputerName% or startup, right-click on computer, properties.  You should see that % ComputerName % folder on your external drive, and in this context, a backup set. Steve Hebert - MVP Microsoft Internet Explorer

• Windows 7 backup and restore recording is not recent files (and task corrupted images)

  I recently discovered that my Windows 7 backup and restore does not work properly and need help to fix it.  The backup runs daily, but it seems that he spared not the files that have been generated in the last month or so.  For example, I was not able to restore files that have been created last week, even if they have been backed up yesterday.

  Any questions/comments that might relate to the question above:

  -J' had to upgrade to Windows 10 for 1 month and then downgraded to Windows 7, about a month earlier due to some software doesn't work only with Windows 10.
  -Last week, I realized that my automatic backup didn't work automatically.  I found the problem is due to a corrupt image of task in Task Scheduler I could fix.  I have developed from my backup with the recommended settings settings, and I discovered that the problem of missing file today.

  -J' still have a problem with the images of task corrupted because when I open the Task Scheduler, I get about 70 errors which "XXXX task: the task image is damaged or has been tampered with."  Any help

  Help for backup and the Task Scheduler issues would be greatly appreciated.  Thank you!!

  André

  Hello

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  This could be due to corruption on the system files, please follow the methods below.

  Step 1: I suggest you to re-create the Task Scheduler.

  Steps to re-create the Task Scheduler

  1. Click Start; in the start search type regedit.exe and press ENTER. (If you get a consent prompt, click Yes).
  2. Navigate to the following location. HKLM\Software\Microsoft\Windows NT\Current Version\Schedule keys and remove its subkeys.
  3. Save the changes and then close the registry editor.

  Now check if the Task Scheduler works.

  Note: The steps mentioned below includes the modification of the system registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  Step 2: Perform the scan SFC

  I suggest that you can exercise SFC scan and check if that helps. The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions. It is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  See the link: use the File Checker system to repair missing or corrupted system files

  Please answer us with this information and the current state of your computer, we will be happy to help you further.

  _______________

  Thank you best regards &,.

  Isha Soni

• After you restore files and system settings collected with FAST problem

  ON a windows XP Professional computer, I created a file and the backup of the system using FAST and when I try and restore, in my view, that the backup of files on an external drive, but a get an error message that I can't access these data.

  Hello

  Unfortunately, I wasn't able to find that everything about the software you mentioned in your post. I suggest you to contact the manufacturer of the backup program you use for assistance.

  I suggest you to return the items mentioned below.

  How to use the backup utility to back up files and folders in Windows XP Home Edition

  http://support.Microsoft.com/kb/308422