Mstsc/span switch becomes black windows when openning more apps. Errors of limited resources.

Original title: RDP with Multiply monitors

Hi guys

I try to use RDP with two monitors. I have XP SP3 and I have been using the mstsc/span

After a while I feel the black screens when I open additional applications. Then the Word will be error blame low resources. If I RDP on the server without the span switch all right. All ideas

Hi Cbits IT,

Remote Desktop connection supports screens high resolution that can be split over multiple monitors. However, the total resolution across all monitors must be less than 4096 x 2048 pixels. Monitors must have the same resolution. In addition, monitors must be aligned side-by-side.

We recommend that you reduce the resolution and check the result.

Note: Total resolution may not exceed more than 4096 x 2048 pixels.

For additional assistance, see "Split on multiple monitors" section in this article

Visit our Microsoft answers feedback Forum and let us know what you think.

Tags: Windows

Similar Questions

  • PAVILION 15: BLACK SCREEN WHEN OPENING THE LID ON WAKE UP

    THE LAP TOP SHOWS A BLACK SCREEN WHEN OPENING THE LID.

    THE SCREEN WORKS WELL WHEN PUT ON, BUT ON CLOSING THE LID FOR A WHILE AND RE OPENING STARTING THE ENGINE AND THE LIGHTS FLASH BUT THE SCREEN IS BLACK.

    TO RETRIEVE THE SCREEN POWER BUTTON MUST BE PUSHED AND WHEN FLASHING JUST AGAIN PUSHED THE SCREEN THEN WAKES UP.

    THIS FIRST STARTED WINDOWS 10 CHARGE BUT WHE I GO BACK TO THE FACTORY SETTINGS AND WHICH IS 8.1

    I TRIED TO REMOVE THE BATTERY TO RESET AND REMOVE AND REPLACE MEMORY CARDS AS SUGGESTED BY SOME SITES I RELOADED ALSO BIOS AND I STILL HAVE THE PROBLEM.

    I WOULD BE VERY GREATFUL FOR ANY HELP.

    Hi @lily-springer,.

    Thank you for your update.

    I am pleased that now when you close the lid, it does nothing.

    You don't have the possibility to contact the HP support for assistance. They can access your system remotely to help overcome the difficulties.

    Contact HP to Contact HP Support assistance

    Good luck!

  • my laptop screen goes black when opened more than 50 degrees

    my laptop screen goes black when opened more than 50 degrees.

    I have a hp pavilion dv4-2145dx, windows xp. No changes have been made recently.

    Could be bad memory.  How old is it?

    Test the memory with a test in the BIOS.

  • Why do I get restore window when opening firefox since the update

    Why do I get restore window when opening firefox since the update. I don't want to restore but it appears every time instead of my homepage as shown

    A likely cause is that you first close all Firefox Windows and then close the Firefox application.

    Some noted that closing of Firefox (Firefox > Quit) while the browser window is always open works for them.

    • Bug 845681 - close all windows and abandonment of Firefox eventually led to about: sessionrestore to appear the next time you start

    (please, do not comment in the bug reports: https://bugzilla.mozilla.org/page.cgi?id=etiquette.html)

  • Gmail in firefox will not open the file selection window when adding attachments, no errors, just nothing. Chrome works fine on the same computer. Firefox is updated

    When you try to attach files to a message using gmail does not. I click on the paperclip icon and no windows open, show no errors, it just sitting there? I can't join the messages as expected using Chrome & gmail on the same computer.

    I cut and restarted the computer without modification. I current firefox [v31] and the computer is a dell desktop running Windows Vista Home Premium SP 2 build 6002.

    Thanks for your help

    Google has fixed this problem with attachments in Gmail, on their side, so this should work without the workaround to allow pop ups for mail.google.com.

  • Satellite L40 12 x: black window when installing XP

    So I am tring insatll Windows XP on this laptop, I downloaded the Intel Matrix Storage Manager, driver 7.5.0.1017 Toshiba dirvers production version web page. I've added it to windows XP install disck nLite programmatically.

    After that, I tried to install windows and after cominicate "instalator is checking system configuration" I just black window.

    Can someone show me where I can download drivers seems OK cuz who doesn't...

    Have you used the Windows XP with SP1 and SP2?

    You should do this! I've noticed several problems during the installation of the OS without SP2 included!

  • When open TASfirstbooks this error message: error running-2146234304 (80131040)

    When you try to open TASfirstbooks this error message: error running-2146234304 (80131040) Automation error tracking. How can I overcome this? I recently uninstalled the program and reinstalled it. This does not remove the data files. Help please.

    Here are the system requirements for BUNCH FirstBooks

    The system configuration required

    • Microsoft Windows XP SP3, Windows Vista SP1 or Windows 7
    • Microsoft. NETv3.5 SP1
    • Microsoft Internet Explorer v7 or higher
    • Adobe Acrobat Reader v7 or higher
    • Adobe Flash Player v9 or higher

    Error -2146234304 (0 x 80131040) usually means FUSION_E_REF_DEF_MISMATCH.

    Please make sure you have Microsoft. Installed SP1 NETv3.5. It is installed by default on Windows 7 computers. Otherwise, you can download and install from the following URL:
    http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=ab99342f-5d1a-413D-8319-81da479ab0d7

    Please ensure that you have the latest service packs, Microsoft Windows and the installed updates, including those for the .NET framework.

    If this does not help, then I suggest that you contact that software BUNCH of support for their product.
    http://support.tassoftware.co.uk/support/home.aspx?TID=258249&STid=302990&PID=

    Thank you

    Marilyn

  • Why Firefox 37.0.1 is not warn when opening more of 15 tablets, as before?

    Firefox used to (last week!) launch an alert warning when you try to open a folder with more than 15 (with a right click) (I think) Favorites in there. I use to check the progress on treatment with a folder of bookmarks, to see how I have left.

    Today, it opens just 80 or more tabs without questioning. Because I have a folder with more than 4,000 pages of a bookmark in it, this change is pretty bad: I don't want to spend an hour doing cmd - W to close tabs before starting to load and drag my system to its knees and beyond.

    Have you checked the setting in Firefox > Preferences > tabs?

    • "Warn me when opening multiple tabs might slow down Firefox.

    See also about: config:

    • browser.tabs.maxOpenBeforeWarn
    • browser.tabs.warnOnOpen

    You can open the topic: config page via the address bar.
    You can accept the warning and click on "I'll be careful" to continue.

  • Windows 7 opens with the error message

    Whenever I start my computer windows 7 I get an error message, C:\Program Files (x86)\SearchExtentions\Client.Exe not found.

    I can close the box and the computer works fine, otherwise what is the error message? And how to fix it?

    Take a look at this thread on the community.

  • How to stop black screen when opening firefox

    When I open a page in Firefox, it is just a black screen, no URL bar not back, the button forward or at home nothing appears. After a few minutes I can mouse over some things (especially the blank spaces, where you can enter text) and it will appear, but still can not see the "buttons" or menus (i.e.Internet options). Need to access the internet options choose any proxy but I can't.


  • How can I remove the bookmarks section search (left side of the window when open)? Just search in bookmarks.

    I don't know if it was always there, but there is now a search box at the top of my bookmarks toolbar that opens on the left side of my window. When the bookmarks toolbar is open the first thing is to bookmarks and the X to close the bookmarks. Just below that is a search box. I don't have a lot of bookmarks and don't want the search box. How can I get rid of the search box?

    Add code to the file userChrome.css below default @namespace.

    The file userChrome.css (UI) customization and userContent.css (Web sites) are located in the chrome folder in the Firefox profile folder.

    @namespace url("http://www.mozilla.org/keymaster/gatekeeper/there.is.only.xul"); /* only needed once */
    
    #bookmarksPanel #sidebar-search-container {
     display:none!important;
    }

    (this leaves still the search bar for the history sidebar; #history - #sidebar panel - search - container)

  • Firefox 9 opens new window when opening new tab on Windows 7

    When I load FF 9, then click on the + to open a new tab, it does, but in the quick start in Windows 7 taskbar, it also shows another FF window, even if the new tab "seems" to be in the original instance of and seq., what I mean is, if I have 4 tabs open, it shows 4 Firefox Windows in the taskbar.

    Is there any solution for this?

    Thank you and best regards,
    Clive

    You are welcome.
    Please do not forget to mark your question as solved if your question has been answered.

  • Black screen when opening a game displays

    Recently bought a game called the "Gundemonium Collection"(CD ROM). "» This came with three games, "Gundemonium Recollection, GundeadGne and Hitogata Happa". Out of these three games only GundeadGne works perfectly. The other two games lead receive me a black screen where I can still hear my cursor movement and confirm/exit command sounds, but no visuals are provided. The final result is based on the windows key, do a right click on the program and its closure.

    Note: I tried to reinstall the game several times, screen resolution of setting, run the program in compatibility modes different, update drivers, install the latest version of DirectX and run the program in a minimized window. Pretty interesting when I reduce the program, the window is black, but I can move blue rectangle hollow (which I assume is a cursor) medium size when I do that I hear no noise at all, or if I can play the game.

    Thanks for any help you can provide.

    Morshu,

    It's really, really weird.
    Everything should work fine.
    All I can say is that you try to delete the parameters (gundemonium.sav and hhconfig.cfg) and rerun games.
    Who should ask if you want to run the game in full screen or in a window.
    Try the windowed mode, there may be a difference.
    In addition, you can try to install the game somewhere other than the default in Program Files, just in case.
    We have done everything that we can to ensure the compatibility, but we weren't able to test all possible cases.

    Also make sure that gdmdat.dat is in the folder Gundemonium Recollection and hhdat.dat is located in the folder Hitogata Happa.

    If you have additional problems, contact me at Sarah (at) wingdreams (dot) net and we can match this topic.

    Sara LEEN,
    Rockin ' Android, Inc..

  • Can not get a window when opening Acrobat Reader

    When you open Adobe Acrobat V2015.010.20056 on a MacPro OS10.9.5 running, no window is present and no files can be opened. I have a Macbook air with OS Yosemite anr the same version on this unit works properly.

    I have pdf files that will be opened with Acrobat DC application which is part of the suite CC.  I deleted the existing DC Acrobat application that was on my computer and then reinstalled it from the Adobe Web site.  The same problem is present.  I can open the Acrobat V2015.101.20056 directly and without window is present, and if I use the file menu and choose a well known file, nothing happens.  Less than a week ago. the app installed Acrobat displays the document.

    Update:

    I removed the application Acrobat DC and installed a new copy of Acrobat Reader V11.0.14.  Everything works fine now.  I don't know whence came the Acrobat DC.  When I used the "Get Info" menu and tried to change the app open in Acrobat Reader choice, only the selected file was changed when I said to use the player for all .pdf files.  All other files has always tried to use Acrobat DC, and of course, nothing has been posted.

    A. Rufer

  • Black screen when opening file in Illustrator 2015.0.0

    I opened a file existing in Illustrator 2015-0, 0.

    -Black screen
    -Press on "ctrl + y" and I'll see paths

    When I start a new project, I can see my work plan, but can't see all the colors I work with.

    Someone has an idea?

    Ron,

    Try toggling the GPU/CPU preview under the view menu.

Maybe you are looking for