MultiCam: first cut separates video and audio

Similar Questions

• How to have separate video and audio over HDMI output Lenovo Thinkpad T410

  I have lenovo T410 and wanted to connect it to my TV high definition. Earlier had problems, but after buying SIIG Displayport to HDMI its job very well. In fact the video and Audio can now be read / listened to on my HDTV via HDMI. However, I have a separate 2.1 computer speaker system, which has much better sound output than my HDTV. Now if I want to see the video on HD TV via HDMI and audio output to speakers for laptop (connected to the 3.5 mm wired 2.1 speaker system), how to do that. I went to SmartAudio settings in the Control Panel, but there is no option of separates HDMI audio to the speakers only.

  I don't want to buy another cable with RGA Audio Converter 3.5 mm female port. Please suggest a direct solution.

  in win 7 do a right-click on the speakers on your lower right corner icon, select playback devices, click on speakers, click on set default, click OK and it should work (sound must come from your computer speakers or the computer 3, 5mm jack)

• Export as save as two separate files - MPEG2-DVD video and audio separately?

  I have the VOB file that I have edited and trying to save so that it can be played on a DVD player.

  When I export it as MPEG2-DVD, which is what I understand I have to do, he recorded two separate files - video without the audio without video and audio!

  Why is this, how do I correct, and I have made the right choice in terms of trying to create the disk that is playable on a DVD player?

  Thank you.

  NJ

  You can not burn a DVD directly from first, we must take the two files in a program such as Adobe CS6 Encore for DVD authoring, here, you add menus and create Bob files for burning disc. If you do a search of forum for reminder, you will find at least a link to tell you how to download.

• CS4 Pro video and audio recording separate...

  I need to have the video and audio together... not two separate folders, my project is due in two days, and I have no idea how to get them both together... I use cs4 master collection!

  How did you need the project? Will it be a DVD-video, a data DVD, another Portage system?

  If you make a DVD-video, you will want to use again the author who and she will have Audio & video encapsulated in the VIDEO_TS folder structure and resident in VOB (basically MPEG-2 files) in this structure.

  If you make a data DVD, where you'll have a single file (multiplex or multiplex), it is a simple export. If you do not get the Audio & video multiplexed into one file, there are the wrong settings in your export. First of all, you will want to check the export Audio and video export, and then you have to go to the tab of multiplexing (on most Export dialog screens) and choose "DVD" and NOT "nil." This is probably one of these two parameters which gives you separate Audio and video.

  If you need something, tell us what it is and make sure you have chosen the export Audio and video export AND chose the correct setting in the tab of multiplexing - basically nothing, but nothing.

  Good luck

  Hunt

• By aligning multiple video and Audio tracks

  I am a multi-instrumentalist and worked on videos of my songs.  I save in Adobe Audition CC.  I've usually will start to record the audio/video with my Nikon D3200 as well as with studio microphones that record in Adobe Audition.  I add then several tracks on this track main video/audio recording to play the electric bass, banjo, mandolin, and percussion etc.  I mix all the tracks and send video clips to make a video in Premiere Pro.  I found that the main (usually guitar track) syncs perfectly with the video camera that I put in the calendar when you use the synchronization in the first feature.  From what I've read, if it is only possible to do this with a video and audio track.  I need to find a way to be able to align the other video sequences with the main audio.  Does anyone have a workflow that make this process easier for me?  Is there a way to do what I'm maybe missing out on Premiere Pro?   Please help me if I can continue the creative process!

  This is an example of what I'm doing https://www.instagram.com/p/-snqVSwzft

  I had to align that laboriously trying to watch the movement of the hand, but there must be an easier way.

  Audio and video synchronization begins to shoot and carries through to the edit and mix.

  Create sync audio and video synch and they will line up in the chronology of the edition.

  A simple way for you to do is a snap of the hand or a tap pronounced on the handle.

  Pro is use timecode in photo and audio recording device.

  Click on the titles and click count-ins are useful for musicians when more dubbing and overlay track.

  Its nice also.

• No related video and audio when using a sequence of nest in the source Panel and try to insert a clip in the timeline

  When I use a sequence of nest in the source Panel and try to insert a clip in the timeline, the video and audio are not related. Before this update (2015.1), I did not have this problem.

  

  Hi Daniel,.

  I can confirm this matter and will get a logged bug. It is a pain, but after having been published in the sequence, select the audio and video components, right click and select 'Link' to link the components between them. Sorry for the inconvenience.

  Colin

  First Pro EQ

• Capture VHS in Premiere Pro 2015, choose the option to capture video and Audio, doesn´t work!

  I used the first Pro CS6 and Premiere Pro 2014 before capture VHS via a record JVC deck, but now, when I do the same process in Premiere Pro 2015, it captures only the video in the option Capture Video and Audio mode. The only way to capture VHS audio is her choose Audio separately, because in this mode, it works. But then I have to synchronize video and audio, and it is not the best option. I can´t find no reason or settings which differs before when it worked. Do you have any suggestions?

  I use Mac OS X 10.9.5.

  Hello! I found the solution. The novelty in first Pro 2015 is that you mark a video and an Audio track to drag the material captured in the Timeline! Now, it works fine.

• Video and Audio not connected

  Somehow, I'm away PP CC 2015 in a State where I drag a video clip in the project and then to the timeline, the video and audio are not related?  Below, he thinks they are, but in the timeline I can drag video and audio around as they are not?  This just started happening.  Normally when I drag a video clip on the timeline, the audio and video are linked, and when I drag a he drags both unless I'm going to Clip and separate the.  What I did wrong and how to do go back to the way it worked by default?

  Thank you

  
  Dave

  Try clicking on this button:

  

• PSE video and audio go out of sync on finished product

  A very strange problem has developed.  I have a PRE project that plays perfectly into the program itself, but when I exit the project start audio and video in sync but go not synced to the first place where the audio and video clips are spliced.  To be precise, I have a file mp4 audio (.m4a) synchronized with a .mov file.  At the first break, where I spliced m4a, m4a and .mov to .mov, the project is in phase when I play in the video window of PRE.  But when I have the project output, video and audio go out of sync at the first break.  Other facts:

  • PC, 8 GB of RAM, W7, all installed updates.
  • By using the same file .prel about a month ago, it worked well.  (I tried to do a DVD extra of this project, when the problem came.) The only thing related to the video that changed on my machine was a new version of Studio of GoPro.  Just in case, I uninstalled from my computer and the problem of PRE is still there.  Could GoPro have left something it's messing things up?
  • In this case independent of the output - DVD, mp4 format, etc.
  • If I insert an empty picture at the junction stay video/audio synchronized until the next splice point, when he goes back out of sync.
  • It happened first in PRE9, but I also PRE13 (who reads the PRE9 files) and the problem happening there too, in the same way.

  I am completely puzzled, especially because this same project file perfectly synchronized DVD in the past produced.  Any suggestions will be appreciated.

  R.H.L.

  Thanks for the clarification of your question.

  Complexion all the case is if this problem is limited to a single specific project file.

  Here's what I read since you wrote...

  You say that your audio synchronized to export this file in a project is present for Premiere Elements 9.0/9.0.1 and elements 13/13.1 first.

  These programs do not seem to share/use the same built in programming of the export. And, further, you say that there is this audio desynchronization if burn disk or export the file to one of these versions at this time. Is this correct?

  Even if the problem is not manifest prior to export, which has been described above point to the project file. Have you changed anything in the project settings or export settings in this file of project for good time / wrong time - courses of transitions, component files software plug-in, flow? And you say that look very detailed to the timeline, the content of this one project has revealed no change before and now after? You write

  Would such a program have changed or are damaged?

  From what I just wrote, could the project file has been corrupted, but...

  If you want to look at this as a corruption of program, then you will need to take uninstall, cleaning, reinstall to 9.0/9.0.1 and 13 to dismiss this idea and replace any missing files of exporting program. But, once again, we are dealing with a single project or all your projects with this problem.

  Please consider.

  Thank you.

  RTA

• Video and Audio fine import... but no soud in timeline

  Hey, it's a question unresolved from a previous post.

  When I import my video sequences in the first he plays well back into the source at the top window on the left. (video and audio)

  However when I drag the clip on the timeline that the video appears and there is nothing in the audio line under it.

  Click on A1 in the header of the Audio track, then "turned on".

• The slice video and Audio at the same time

  Hello everyone.

  When I click on the K control, it dose create a slice in my calendar, I want to create a slice for my Audio, at the same time.

  But whenever I have cut a video, and when I want to delete the part of the slice of the film that I cut, the audio is still there, and I have to use the Razor tool to select the portion cut under the cut film.

  Thank you

  Simon.

  The razor default command (Ctrl + K like you currently have mapped it;) I use Ctrl + B, but there is no functional difference) slices only through the tracks that are being targeted. So, be sure to target your audio tracks for the command works correctly. just click the track selector associated with your audio files (Audio 1, 2 Audio, etc.).

  In CS5, there is a new command to cut through all the tracks, regardless of targeting. Discover the sequence > razor all tracks for it. It's probably Ctrl + Shift + K by default. Note that this will cut everything, securities Optionally you want not cut. Just use one that suits your needs.

• Why did my video clip goes into a video and audio in 5

  Hello

  Adobe CS4, my first video I'm working and my video goes into a video and audio drops to 5 audio, why and how can I fix it. Also, I've added an audio clip and it will onlt go in 5 and will not let me place where I want to. Thanks in advance for your help.

  Eric

  ALT-click

• Premiere Pro 2.0 compatible video and audio formats

  I'm working on a project that uses old clips newreel vintage and such of the 1950s and 60's, they are available for download in different formats.

  I downloaded many of them, but when I import into my calendar, there is no audio for these clips. They work when I play them just out of first. What are the supported formats for first pro 2 in video and audio?

  I did several films but did not come about this before.

  Welcome to the forums.

  The following links will help:

  FAQ: How to import files to the format xyz?

  Can FAQ:how I convert my files?

  FAQ:why are there no sound in my imported MPEG file?

  See you soon
  Eddie

• What is a module secure to download youtube video and audio, something, virus and malware free?

  What is a module secure to download youtube video and audio, something, virus and malware free?

  We are not really discussing comparisons add-on here, but note all formally welcomed the module extensions hosted on addons.mozilla.org and available from the will of the User Interface of Firefox were considered and be safe, secure and virus-free.

  • Use the Menu button-> Add-ons-> [search all add-ons]
    (Or key in the address bar Subject: addons)
  • Search example (you can do a targeted search the better your own machine)
    • With > 5 M high to the users of the list is Video DownloadHelper

  NB. There may be legal as possible & /or copyright with downloading some documents issues, but this is out of scope of this support forum discussion.

• I want to install firefox addon called "youtube video and audio downloader 0.3.5 by Chris. How can I check to see if it has malware

  How can I check if the program 'youtube downloader video and audio by Chris 0.3.5 has malicious software.
  When I go to download it has chain
  https://addons.Mozilla.org/Firefox/downloads/latest/413644/addon-413644-latest.xpi?src=userprofile

  I'm so nervous about downloading anything for fear of getting my hijacked browser or worse, because it's already happened twice. Any advice on this program or if there is a similar program to download youtube, who is known to be squeaky clean?

  Too, I have youtube downloader video and audio 0.3.5 by Chris on FF but have not used a lot or not at all. Today, Avast gave me a warning (probably a Malware DB recent update) that this product has very bad side. My two main concerns are a possible Trojan and adware popups - horse for now that I only have those on a single site, The Pirate Bay, but they are devilishly difficult to get rid of.

  Avast and some other malware utilities not come with Trojan horses, but I saw a EULA (on Board of another, may not be the same product) which explicitly stated the software would share information on the internet, probably tunnel through the firewall. Malware utilitie which would detect as a Trojan horse, or that they would assume that I installed it intentionally? How do they know?

  Are modules which arise on the FF Add-ons Manager > get guaranteed by Mozilla addons?