Multiline text box - how to start at the top?
I have created a form that has several multi-line text entry fields. How can I configure the text field so that data entry starts at the top of the domain of integration rather than in the Middle?
Thanks in advance for any helpo you can provide.
Highlight the field and in the fonts Palette, you can choose a justification. It is probably set to left midfield. Change it up.
Paul
Tags: Adobe LiveCycle
Similar Questions
-
Bullet point in the text box, how the bullet point?
I would like to have a bullet point in the text box, how do I get the bullet point when I use the Helvetica font?
I think that it can be done if the box is configured to have Rich Text Formatting.
-
How do you multiline text in a continuous form between the lines without scaling of the text?
Help. How do you multiline text in a continuous form between the lines without scaling of the text?
I tried to put each line of the form for amounts of specificity so that it ends at some point and does not change the text size to fit on the line but different key characters have different widths, so you do not get a length of the same line.
I tried to remove the long text scrolling, but it changed nothing.
I can create a text box great to fill out and have this scrolling of additional lines, but then I get too much information from people and I would need to clarify the lines behind the answer multi line text, or delete the lines...
Is there a better solution?
I usually just remove the lines and set the field "Does not scroll long text" so that all the text is visible. Including the lines is really only useful if the form may be printed and completed by hand, in which case you can use scripts as in this example is: http://acroscript.net/pdf/demos/multiLine_Demo1.pdf
It works as expected in Acrobat/Reader, but not in Chrome and other PDF viewers who have little or no support for JavaScript. It uses scripts customized to validate on Focus and blur.
-
Get the last value of a multiline text box
Hello
I have a form of acro with a TextBox multiline, a few radio buttons and text fields.
When the user clicks on the radio button, the value of the multiline text box is displayed in another text box.
This is the script for the option:
The target field
var t = this.getField ("programme of Action");Field value
var g = this.getField("Agenda_Item").value;
t.Valeur += g + "\n";
What the script does, is show ALL values of the multiline "to the point" text box in the other text field 'Programme of Action '.
I need the script to extract the last line or entry of the multi-line text box and put this value in the other field of text. There could be any number of lines from one line to two, three, four lines etc.
Can any advise please how the script can be modified to get the value of the last row in the multi-line text box?
Any help will be most appreciated.
You can split the string that is returned to carriage returns:
var a = getField ("the order of the day Item").valueAsString.split(/\r/ ");
You must then move backward from the end of the table until you meet an element of array not empty and use it.
for (var i =. Length - 1; i >-1; i--) {}
If (a [i]) break;
}
If (typeof a [i] = 'undefined') [i] = "";
t.Valeur += [i] + "\r";
-
Count the number of transport returns in a multiline text box
Hello
I have a script to count the number of feedback from cart at the end of each line of text in a multiline text box.
After you run the script in the console, the result keeps showing 0.
Please can someone tell how the script can be revised to count the number of carriage returns?
var number = 0;
for (var i = 0; I < this.getField; i ++)
{
var f = this.getField ("ActionAgenda");
If (f.value == '\u000d') count ++
}
Console.println ("there is a total of" + count + "of carriage returns.");Any help will be most appreciated.
Try this:
var number = 0;
var s = getField("ActionAgenda").valueAsString;
for (var i = 0; i)< s.length;="" i++)="">
If (s [i] = '\r') count += 1;
}Console.println ("there is a total of" + count + "of carriage returns.");
-
DC as a sentence installed and I can't find anything! How do I highlight some text in the box, how can I change the text color?
Hi taraf32044550,
I think the new user interface can be a bit of a learning curve, but I hope that you really like it when you find your bearings. Please check these tutorials will help you to find your way around: Acrobat DC Learn & support.
In particular, I think that you will find this tutorial very useful: change text and images in PDF files
Best,
Sara
-
Hi experts,
I have a multiline text box. user will enter some empno in there and I have to deal with them individually could you please suggest how can I take individual text in the text box.
For example, in the multi-line text box, it will be lokk like
123
2345
567
8765
and I have to do a string like 123,2345,567,8765. After that, I will separate each token.
Could you please give me an idea how I can make this chain.
Concerning
RajatHello
Create the following function in your module program Uint:
FUNCTION Split ( PC$Chaine IN VARCHAR2, -- input string PN$Pos IN PLS_INTEGER, -- token number PC$Sep IN VARCHAR2 DEFAULT ',' -- separator character ) RETURN VARCHAR2 IS LC$Chaine VARCHAR2(32767) := PC$Sep || PC$Chaine ; LI$I PLS_INTEGER ; LI$I2 PLS_INTEGER ; BEGIN LI$I := INSTR( LC$Chaine, PC$Sep, 1, PN$Pos ) ; IF LI$I > 0 THEN LI$I2 := INSTR( LC$Chaine, PC$Sep, 1, PN$Pos + 1) ; IF LI$I2 = 0 THEN LI$I2 := LENGTH( LC$Chaine ) + 1 ; END IF ; RETURN( SUBSTR( LC$Chaine, LI$I+1, LI$I2 - LI$I-1 ) ) ; ELSE RETURN NULL ; END IF ; END;
Then get any what token of your text box - say: blk.ti like this:
Declare lc$value Varchar2(256); indice pls_integer := 1 ; Begin loop lc$Value := split( :BL.TI, indice, CHR(10) ); exit when lc$value is null; message('value:' || lc$value); indice := indice + 1 ; end loop; End;
François
-
I can use Alt + D to reach the address bar to enter a URL, but is there a way I can then go to the default text box, to enter data, once the search engine page was opened, using a shortcut key? I have the commands in the shortcut keys page doesn't recognize as not being what I want.
Not as far as I know. Sites may assign a keyboard shortcut to a text field if they like, known as an AccessKey, but he is not necessarily going to be any consistency, and the site you may not be using one.
It is possible, there could be an add-on or userscript to help with this. Or otherwise, someone might be able to write one for a particular site.
-
With WMP11, when adding pieces of the current reading library, I often change between two tabs. My question is every time I switch back to the library to add more songs, tab how can I get the list to stop starting at the top? I have a number of songs scrolling on there where I left last can be very inconvenient. I remember with an older version when you leave the library, that he would stay where you left it. Yet once, how can I stop the library always start at the top and instead pick up where I left off?
Thank you very much
Reinstalling wmp11
-
dm3-2010us how to start on the restore cd
dm3-2010us how to start on the restore cd
As soon as you turn on your computer, start typing the ESC key. It probably will take you to a menu with F9 to boot options. Select the drive to cd/dvd internal among the choices listed.
-
My students use the filling and the signature on a package of .pdf tool I'm going to fill them, but when they record and open the next day their text boxes, that they created with the bucket fill tool and sign all went and many are overlapping.
Hi chbradshaw,
Instead of filling & signature, tool, use the text comment comment tool, KB doc option. using comments in the PDF, Adobe Acrobat DC files (keyword: Add a text comment).
Kind regards
Nicos
-
I just updated my indesign to CC of CS5. One thing I notice which is annoying is some text boxes and images go live. For example, if you close a text box in CS5 you close the box you see reformat the text to set the new size. In CC, the text does not reformat until you are done change the size of the box. It's the same for the images when resizing or rotation re. You don't know what you have until its finished. If you are a little guess instead of see what you're doing while. Is there a way to change this, or does anyone else have this problem. Maybe it's just what does CC. But I'm not a fan... Can anyone help?
When using the image processing manages, click... for a while... then drag...
-
I try to enter the serial number to register my software, but the label outside of the box, he's starting with the letters and it does not accept the letters... . Only numbers
Serial numbers contain no letters, so maybe it's your redemption code, for use on adobe.com to get your serial number.
Here are a few links to look for more information
https://helpx.Adobe.com/x-productkb/global/redemption-code-help.html#productboxorprepaidca rd
-
CF8 dev edition - how to start / stop the server?
Mac osx - CF8 dev edition - how to start / stop the server?
I would turn off auto CF8 start at startup and I can manually start and stop the server...
Q: How do I configure this?> Now, I'm also interested to extinguish CF8.01 "auto start on startup.
> (currently set to that now)
>
> Q: How can I turn off that autostart?
>
> Hi folks - I'm always interested in the CF on MAC OS x 10.5 server configuration to
> * NOT * Auto Start - how can I turn off that autostart?I googled "cf8 osx doesn't autostart" and turned to the top this:
http://www.Feed-Squirrel.com/index.cfm?evt=viewItem&ID=96307Who is? That's all a little Greek to me because I have not used a
Mac for...Crikey...
TWENTY YEARS.
--
Adam
(suddenly feel old enough) -
Loop of auto repair. Computer will NOT start at the top.
My HP Pavilion becomes a blue screen with "Unhandled Exception in thread system. He then brings me to a window of auto repair. If I click, 'Restoration', the screen turns black with the logo 'HP' and then gets stuck. If I click 'Cancel', it brings me to a screen that says: "auto repair couldn't fix your PC. "Log file: C:\Windows\System32\Logfiles\Srt\SrtTrail.txt.
I tried to go to advanced options and get the command prompt, using:
Bootrec /fixMBR
Bootrec /Fixboot
Bootrec /rebuildBCDI also tried to open safe mode. All with no luck.
Something else I could try?
Thank you!
Hello
Try to run the automatic repair of a Windows boot disk that often works better
as the recovery of the system.How to run a repair 'automatic' to solve the problems of Windows 8 start
http://www.eightforums.com/tutorials/2843-automatic-repair-run-Windows-8-a.html======================================================
If necessary:
How to start on the "System Recovery Options" in Windows 8
http://www.eightforums.com/tutorials/2269-system-recovery-options-boot-Windows-8-a.htmlTry to do a "Refresh your PC without affecting your files" (or modification of your personal data
settings) or even a restore.Windows 8 includes special discount methods (keep files and settings) or a reset
(new installation remove all).How to restore, refresh or reset your PC
http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PCHow to create a system image to refresh your PC in Windows 8
http://support.Microsoft.com/kb/2748351How to update Windows 8
http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.htmlHow to reset Windows 8
http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.htmlIf you need a repair disc :
Create a system repair disc
http://Windows.Microsoft.com/en-us/Windows7/create-a-system-repair-discHow to create a "system repair disc" (CD/DVD) in Windows 8
http://www.eightforums.com/tutorials/2855-system-repair-disc-create-Windows-8-a.html=======================================================
In 'some' case will help this article.
Crashes Windows or freezes
http://support.Microsoft.com/kb/2681286Do not forget to check with support of system manufacturer (manufacturer of motherboard for custom
online systems), their resources and the drivers and ask in their forums (if any)
on known problems. Don't forget to update BIOS, drivers of low level chipset,
and the other pilots of major on-board and separate devices. Those who alone can
set all or part of these issues.Note the use of Win Key + X and Win Key + W (to go on the Control Panel, Run and parameters
According to needs). Win + D key calls the office and using Win Key active / disable the Office
and the splash screen.Translate Windows 7 methods and use them on Windows 8/8.1
http://Windows.Microsoft.com/en-CA/Windows-8/resolve-Windows-blue-screen-errors
Resolve errors stop (blue screen) in Windows 7 - has a section for if you can or can not
Start Windows (applies to Windows 8/8.1). If you cannot start Windows 8/8.1 try using
a disk repair (see methods of doing a below) to access Mode without failure and other evil -.
steps of shooting.
http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7Check this thread for more information using BlueScreenView, MyEventViewer and other troubleshooting methods BlueScreens - top 3 responses (+ 1 other) (applies to Windows 8/8.1).
We can analyze the minidumps if make you it available the OneDrive or other file sharing sites (such as MediaFire). If you have problems downloading the minidumps copy them on the desktop or the Documents folder and download them from there.
Adding files to your OneDrive
http://Windows.Microsoft.com/en-us/Windows-8/getting-started-onedrive-tutorialDownload pictures and files
http://Windows.Microsoft.com/en-us/onedrive/add-photos-files A disk - sharing files and folders and change the permissions
http://Windows.Microsoft.com/en-us/onedrive/share-file-folderZIP or download the content of the C:\Windows\minidump
Use OneDrive to upload collected files
-------------------------------------------------------------------------
Also this, so you can see the probable bluescreens.
Windows Vista restarts automatically if your computer encounters an error that requires him to plant. (also, Windows 7 and Windows 8/8.1)
http://www.winvistatips.com/disable-automatic-restart-T84.html======================================================
The system has RAID? If so, it's also very suspicious.
This error is usually a driver problem and adapter (video) display driver is the most suspicious that there could be others. Antivirus/antispyware/security programs, equipment (heat) and major software issues can also cause the error. When you get to the section of the driver of the utility troubleshooting use my generic methods below, and then return to the if necessary troubleshooting tool.
Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - updates of Windows to see if all drivers have been updated it. Other donor opportunities include security/antivirus/anti-spyware programs.
------------------------------------------------------------------
BCCode: 7F 0x0000007E which is also 0x1000007E
* 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-Bug Check 0x7E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
http://msdn.Microsoft.com/en-us/library/ff559239 (v = vs. 85) .aspx
---------------------------------------------------------------------------------------------
It's my generic how updates of appropriate driver: (updating the video/display driver and BIOS)
This utility, it is easy see which versions are loaded: run DriverView - VIEW driver Microsoft set hide - update those without drain in their names (and BIOS and chipset).
-Free - DriverView utility displays the list of all device drivers currently loaded on your system. For each driver in the list, additional useful information is displayed: load address of the driver, description, version, product name, company that created the driver and more.
http://www.NirSoft.NET/utils/DriverView.htmlFor drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
Control Panel device - graphics card configuration-manager - note the brand and complete model of your graphics driver - double-click - tab - write version information. Now, click the driver update (this can do nothing as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT it will refresh the driver stack.
Repeat for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their own software and drivers and the other main device drivers you have.
Now go to the website of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration), then site of the manufacturer of the device (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Review of the BIOS, Chipset and software updates on the site of the manufacturer of the system while there).
Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.
Always check in the Device Manager - tab drivers version you install actually shows up. This is because some restore drivers before the most recent is installed (particularly that audio drivers) so install a driver - reboot - check that it is installed and repeat if necessary.
Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
manually by model.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmWindows 8/8.1 - hardware and drivers
http://Windows.Microsoft.com/en-us/Windows/hardware-drivers-help#hardware-drivers-help=Windows-8Windows 8/8.1 - Why Windows is not find my device?
http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-deviceWindows 8/8.1 - what happens if a device is not installed correctly
http://Windows.Microsoft.com/en-us/Windows-8/what-device-isn ' t-installed-correctly========================================================
Windows 8/8.1 includes special discount methods (keep files and settings) or a reset
(new installation remove all).How to restore, refresh or reset your PC (Windows 8/8.1)
http://Windows.Microsoft.com/en-us/Windows-8/restore-refresh-reset-PCHow to update Windows 8 & 8.1
http://www.eightforums.com/tutorials/2293-refresh-Windows-8-a.htmlHow to reset Windows 8 & 8.1
http://www.eightforums.com/tutorials/2302-reset-Windows-8-a.htmlIf you need a USB Flash Drive recovery or other methods:
How to create a recovery USB in Windows 8 & 8.1
http://www.eightforums.com/tutorials/5132-recovery-drive-create-USB-flash-drive-Windows-8-a.html
How to start on the "System Recovery Options" in Windows 8 & 8.1
http://www.eightforums.com/tutorials/2269-system-recovery-options-boot-Windows-8-a.htmlBoot to the tip "Startup parameters" in Windows 8 & 8.1
http://www.eightforums.com/tutorials/4924-advanced-startup-settings-boot-Windows-8-a.html--------------------------------------------------------------------------------------
Tests of memory intercept all errors, such as memory do not match (possible even for poles that seem identical) and how faster memory is placed in system behind the slower memory. Also is it better to Exchange also sticks in and out to check for those, even if all the tests of memory do not show a problem.
To test the RAM here control - run 4 + hours or so.<-- best="">-->
www.memtest.orgFor the Windows Memory Diagnostic tool.
WinKEY + W - type in the search-> memory box - find the top Memory Diagnostics tool
list - and follow the prompts.How to run the diagnostic tool for Windows 7 memory (and 8/8.1) - in Windows 8/8.1 the name is "Windows Memory Diagnostic".
http://www.SevenForums.com/tutorials/715-memory-diagnostics-tool.html======================================================
After doing ALL the updates you can and if the problem persists, run DriverVerifier.
(Remember to use the methods Windows 8/8.1 displayed at the top of the first answer above).Driver Verifier can help find some BSOD problems:
Using Driver Verifier to identify issues with Windows drivers for users advanced
http://support.Microsoft.com/kb/244617How to solve the problems of driver in Windows Vista or 7. (also 8/8.1 and 10)
http://www.WinVistaClub.com/T79.htmlUsing Driver Verifier
http://msdn.Microsoft.com/en-us/library/ff554113 (v = VS. 85) .aspxHow to use Windows drivers check Manager to solve problems and identify the Driver questions
http://www.YouTube.com/watch?v=_VwIDD9xngMDriver Verifier
http://www.techsupportforum.com/2110308-POST3.htmlUsing Driver Verifier
http://www.faultwire.com/solutions/using_driver_verifier.phpYou can disable the driver verifier
http://support.Microsoft.com/kb/244617WINDOWS key + X - RUN - type-> auditor/reset press ENTER to disable
BlueScreenView lets you know if there is a driver specified in the error message. Also check with MyEventViewer when the blue screen.
If DriverVerifier creates a minidump upload it and post the link here so we can analyze.
I hope this helps.
--------------------------------------------------------------------------------------------
Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">->
Maybe you are looking for
-
Satellite Pro A60 - where to buy the recovery CD
Hi newbie here.I have a Satellite Pro A60 and it gives my son for his college stuff.I want to reinstall XP Pro, but I can't find the CD that came with the laptop we moved house ect. Is there anywhere where I can buy an of for the laptop, so I can do
-
An application uses the 1.8 GB of storage - why?
I used my first iPad of gen Air for a few years without problem. Lately, I've been running short of storage space. When I visit "manage storage" in the settings, I see that a single application, Washington Post, using 1.8 GB of storage space. It come
-
Can support core i7 win xp?
I intend to change my old notebook, but confuse even if new supported for intel core i7 win xp pro or not, because my office still usingnthat system.
-
The user under Windows license only have re - install disk
I have a legitimate license to Windows XP version that came with my gateway computer and my motherboard crashed and I replaced it but NOW my reinstallation disk will not install with the new motherboard. Can I get a full version of windows without bu
-
Linksys E2000 router slow connection.
OK, so I use 2 with 2 routers, for me and my father, another for my brother and sister. We decided to get rid of the other router and make our cisco E2000 our primary router, but everything on the router configuration has been deleted, so we had to