Linksys E2000 router slow connection.

Similar Questions

• Problem HP 6500 wireless has more and linksys E2000 router

  Hello

  Just bought a HP 65000 has more the printer today and want to connect it to my wireless router, which works very well for all my other devices and worked very well for my old Epson as well.

  The router configuration:

  Security: WPA/WPA2 Mixed Mode

  Channel: 6

  Band 2.4 Ghz

  Configure a static ip address 192.168.1.22 for HP based on its mac address.

  Sometimes printer says that it cannot find the network, which results in FAILURE messages on the wireless network test report. other times it connects, gets the right ip address, which translates as PASS messages on the test report, but it seems to disconnect again because he repeats to me it is not connected and I don't find it with any computer. The website of the printer is also not available.

  Any ideas?

  Thanks for your time.

  What brand/model of router and what kind of ISP?  Have you tried to channel 11?

• Question re: Atheros AR5007 802. 11 b / g adapter and connection w/Linksys E2000 wireless router

  Help! I'm at my wit's end. I just bought a Linksys E2000 router and cannot find a way to get the router to connect wireless on my HP G60-235DX laptop (running Vista) via the WPA2 setting. I know that the Atheros AR5007 802. 11 b / g wifi adapter is the question, and I downloaded the latest driver update... and still have the same problems.

  FYI - I can connect to the computer via the internet cable from the Linksys E2000 router so I know that it is not a modem issue.

  Help... PLEASE, I BEG YOU!

  Thank you, thank you, thank you...

  Paul,

  I solved the problem! After almost return the router to Best Buy today during lunch, I decided to give it a try more tonight and again call LinkSys. After almost decided with the Linksys officer that they only solution is to put another card in my computer, we stumbled on the question.

  We have gone to 5.0 GHz to 2.4 and spent the 'auto' channel to channel 9.

  And now my computer works like a charm (thanks also to update the driver as you instructed).

  Thank you!

• New att/motorola modem with linksys wireless router connects local only!

  Trying to set up my linksys wireless router to connect to the internet. I get local only access. Just got the new modem and was able to connect to the internet with a wired connection. I had no problem with my router and adapter wireless during the last 3 years. They had to create a new connection broadband with the modem to local and internet access. My Wi - Fi is a new connection, local only. Any help would be appreciated so to get my connection wireless internet.

  Hello

  Let us work together to solve this problem.

  I ask you to follow these links and check if the problem is resolved:

  Set up a wireless router
  http://Windows.Microsoft.com/en-in/Windows-Vista/set-up-a-wireless-router

  Setting up a wireless network
  http://Windows.Microsoft.com/en-in/Windows-Vista/setting-up-a-wireless-network

  Wireless network card: frequently asked questions
  http://Windows.Microsoft.com/en-in/Windows-Vista/wireless-networking-frequently-asked-questions

  For more information:

  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/thread/4215a10d-08DD-404A-a43a-635a2f141f0d

  Warning: using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Please let us know the status of the issue.

• Linksys E2000 to into acccess point/switch helps.

  Okay so here's the deal, we got At & T Modem/Router upstairs, and then we had a long cable ethernet connecting here in the basement. The problem is that this allows only a connection to the local network at the same time (a problem for LAN parties and others). I do have a Linksys E2000 router however and I want to be able to use it as a switch access point.
  I'm sure this is possible, but I forgot all the steps to do so.
  The att modem/router is running on 192.168.1.254 and my Linksys that is directly connected is on 192.168.1.1, so I have another address in this field.
  What I need to change my Linksys settings now, or do I have to change the settings for at & t?
  Basic steps would be appreciated, but I am familiar with the concepts of normal network, so you mustn't it level by the low that much.
  Also I will use this for Xbox Live at points so will I need to re - open all the ports on my Linksys, or at least put the DHCP to static IP Xbox to keep my NAT good?

  Thank you
  -Austin

  Two types of installation would be possible. Click on the following link to find out how the configuration.

  Editing cascading (connecting) a Linksys router to another router

• My computer does not my router Linksys detect my internet connection. Also, I am unable to download itunes and I am no longer able to sync my windows mobile phone.

  connection and download Internet problems

  My computer does not my router Linksys detect my internet connection.  Also, I am unable to download itunes and I am no longer able to sync my windows mobile phone.  How to solve these problems?  so that my programs to work, I need these features.

  Hello

  1. you are using a wired or wireless?

  2 have you made any changes to the computer before the show?

  3. you receive an error message when you try to connect the Linksys router to the computer?

  4. what exactly happens when you try to update I Tunes?

  5. you receive an error message while updating I Tunes software?

  Please provide more information on the issue so that we can better help you.

  In the meantime, you can try the steps of troubleshooting provided in the links below and check if the problem persists.

  How to troubleshoot possible causes of Internet connection problems in Windows XP

  http://support.Microsoft.com/kb/314095

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

• Cannot connect my HP Photosmart c309g-m printer to my Linksys WRT54GC router. "No filtering = FAIL.

  I have problems connecting my HP Photosmart c309g-m to my Linksys WRT54GC router.  The diagnostics report says "no filtering = FAIL" in all my attempts.

  First I had implemented security wireless to the router with a personal WPA2 password.

  Because this does not work, I spent my WPA security, given that the diagnostic report suggests that this is what he actually uses for encryption. This no longer works.

  I double and triple checked the MAC address of the printer in my MAC filtering wireless settings. He was right. However, he didn't always connect.

  Reluctantly, I turned MAC filtering. However, the printer still wouldn't connect.

  Now, I'm out of options. All possible ideas for this problem?

  Here are a few ideas:

  1. check that the SSID is being broadcast.

  2. make sure that DHCP is active.

  3. don't use MAC filtering (it is not a security measure, in any case).

  4 change the channel from router to 11.

• Help! I need to connect Linksys WAP4400N 3 to an existing linksys WRT350N router

  Please someone help me.

  I have a modem connected to a router (Linksys WRT350N). The router is connected to a PC and then connected wireless to 3 laptops. Everything works very well.

  Now I need to extend the network to 2 other floors and so just bought 3 Access Points (WAP4400N). The plan is to make a wired connection to router for APs on each floor. The router is on the ground floor. I asked the CAT5e cables to the location of the router for the 2 floors where the APs will be.

  Now, this is my problem: when I'm on the upper floors and plug the cables directly on my laptop (AP off and not connected to the cable) I can connect to the internet with the cable connected to the router on the ground floor. I can also connect to the internet via the AP when it is connected to and sitting on the same table as the router on the ground of grongd. However when I take the AP to the upper floors and then connect the cables already thrown for this on the uppr floors I am unable to connect to the internet, but get a 'LIMITED CONNECTIVITY' message.

  Please can someone give an instruction step by step how install and configure a Linksys WRT350 Wireless Router to a Linksys WAP4400N Access Point

  NB. whenever I tried to select automatic DHCP against IP STATIC on the WAP4400N installer it will just in an endless "Please WAIT... RESTART SYSTEM' and the screen remains like this for. So I was able to use STATIC IP in the WAP4400N configuration.

  Since yesterday and today, I have been on it.

  Any help will be much appreciated.

  Kind regards.

  Well done to death. You advice was more useful. However, I think I need to make this post

  The problem has been as a result of lower cable at my provider. The network is running smoothly. Has been in place since last week when I replaced the lower quality cat5e cable cat5e cable.

  A Board here please be careful and make sure you complete the cable correctly. A bad end can lead to connection problems I discovered in this case when my team confidence terminated cable incorrectly.

  Network is up to & operational

  Thank you death your help has been invaluable.

• connect to hp 2540 wireless to linksys WAG200G router

  I try to connect the HP DESKJET 2545 to the Linksys WAG200G router via the USB cable and the HP software. The software detects the router and the parameters (name SSID and password) but finally when it tries to connect, it says that the name of the network (SSID) is not found.

  I have enterd the router manually settings and I still get this message.

  I have disabled the firewall on the router and still nothing

  Help, please

  Thank you. Isolved the problem. Just use another browser. I used google Chrome instead of internet explore and everything went well

• Unable to connect to Linksys WRT120N router using Notebook Pavilion dv1000

  Hello

  I recently bought a Linksys WRT120N router for my existing HP Pavilion dv1000 laptop. I am not able to connect to this router to my laptop.

  The steps I am following are-

  1. I activated the WLAN by clicking on the switch.

  2 a permit wireless

  3. given the available wireless networks

  4 selected my network (which is a secure (WPA) wireless network) and clicked on connect

  5 enter the network key (twice) and clicked on connect

  I get the message - "Please wait so that windows connects to the network, waiting for the network"... After a while the screen goes away; There is no message of success or failure of a current connection. The same wireless connection works my other laptop Toshiba in a jiffy, which means that my router seems to have been implemented correctly. Both are on the version of Windows XP Home Edition, SP3, 2002.

  I did the following settings for my wireless connection: -.

  the network card is PRO/Wireless 2200BG network connection

  I have the most up to date driver, checked for an update

  the network for my wireless connection authentication type is WPA - PSK

  data encryption is TKIP

  is the wireless network - enabled network (WPA) wireless security

  What follows is set for the wireless to 192.168.0.1

  manual configuration

  network-mixed mode

  name of the channel-xyz

  channel width - 20 mhz only

  great channel-auto

  STD - 6 channel - 2.437 GHZ

  SSID broadcast-enabled

  wireless security-mode-WPA Personal

  Please please help me... Please let me know if you need more information about the same... TNX!

  guys, I found others who have faced the same problem too

  the solution to this problem is the Forum of linksys... the key was to update the firmware for the router and get the wifi driver was last updated to intel!

  Here is the link for the same

  http://forums.linksysbycisco.com/Linksys/board/message?board.ID=Wireless_Routers&thread.ID=146826&view=by_date_ascending&page=4

• I have a desktop with windows 7 and a linksys E1000 router and you want to connect a laptop with windows 8, it will work router?

  I have a desktop with windows 7 and a Linksys E1000 router and you want to connect a laptop with windows 8, it will work router?

  Yes, it should work perfectly, if wired (Ethernet) or wireless.

  Click on the network icon in the Notification area

  Click on the available wireless network that you want to connect

  In the list of available wireless networks, click a network, and then click on connect.

  Some networks have need a network security key or password. To connect to one of those networks, ask the network administrator or service provider for key security or password.

• Need HELP to change the NAT type to open on Linksys E2000.

  I was wondering if anyone could tell me how to change my nat from moderate to open so I can play xbox without any problems. But the strange thing is my nat was open, but it changed to moderate and I recently bought the linksys e2000 and it was open at first, but no more. If anyone can help me?

  Follow the below mentioned settings, then check.

  Open an Internet Explorer browser on your computer (desktop) wired page. In the address bar type - 192.168.1.1 and press ENTER...
  Let the empty user name & password use admin lowercase...
  On the Configuration tab change the size of the MTU to 1365, then click on save settings...
  Click the 'Administration' tab and disable the UPnP option and click on save settings...
  Click on the tab "Games and Applications" and then click the sub-tab "Port Range Forwarding"...
  (1) on the first line in the box, type Application in ABC, in the start box, type in 53 and type in 3074 service box, leave the Protocol as and under type 192.168.1.20 ip address and check the box to enable, click on save settings once it's been...
  (2) once you return to the game to the top page, click the Security tab and uncheck block anonymous Internet requests and click on save settings...
  (3) click on the status tab, and then note the DNS1 and DNS2 addresses...
  (4) address IP, Goto settings XBox network settings and assign the following on your Xbox and select manual IP settings
  IP address:-192.168.1.20, subnet mask:-255.255.255.0 default gateway:-192.168.1.1...
  (5) also assign addresses DNS on Xbox
  Use DNS1 and DNS2 addresses you took note of the primary router as secondary DNS & DNS status tab for the xbox...
  (6) turn off your modem, router and Xbox... Wait a minute...
  (7) plug the power to the modem first, wait a minute and plug the router power cable, wait another minute and turn on the Xbox and... test it connects...
  IP address: part 192.168.X. [last intellectual property in your device] for example if static ip given to the unit's 192.168.X.10 get the last part and put it in the empty box.

• DSL via a wireless router: slow XP, fast on Vista

  DSL via a wireless router: slow XP, fast on Vista

  Hello, I just moved into a new House that has DSL service. My Vista laptop connects seamlessly to the network, but my XP machine trickles in at 50-150 Kbps and is flaky. I rebooted everything, power all pedaled, verified and updated the drivers. (Maybe I missed something?)  The specs are all lower. Any thoughts on what is happening?

  Thank you!
  Brian

  EarthLink DSL
  VisionNet Modem
  Linksys wireless router (router broadband wireless - b)
  -BEFW11S4

  2 wireless laptops

  Get about 1 Mbps on a Vista Machine (which I believe is the expected rate).
  (Dell XPS M1210)
  Works with either ethernet or wireless connection to router

  Get about 50 Kbps on the XP Machine
  (Dell Latitude D830)
  Works with no wireless or ethernet connection to the router
  Intel Wireless Wifi Link 4965AGN,
  Driver: 12.4.3.9, Date: 28/05/2009

  Two laptop computers were working well 4 days ago in my previous House, sharing a connection to broadband Charter via a linksys wireless router.  The works of XP machine still work well pick up public Wi - Fi in coffee shops, etc.

  Under the name Vista computer works fine... I suggest to check again the Xp computer and disable the firewall and antivirus on the computer and try... You can try changing the wireless channel on the router... Also keep the mixed mode network mode.

• Slow connection without wire-Intel 3945ABG card on Inspiron E1405

  I've never noticed this problem before because I never had a more than 5 Mbps connection. But a few weeks I had a 15Mbps internet connection cable and am using a Linksys WRT54GS router with him. My laptop (Inspiron E1405) never seems to get 5Mbps > 4 - the wireless. I've finally isolated the problem on my laptop, after test with a friend too, where it was stuck at 4-5 Mbps too. When I directly connect the modem (ethernet), I get the expected 17-19 MB/s, so my ISP is not at fault.

  I've been watching online solutions, and here is what I tried so far, but without positive result:

  1 tried to use different channels on the router (1-11).

  2. I tried a Linksys tech support - they suggested a few settings more to the router... no permit.

  3. update my Intel wireless drivers... has the last being now... but no effect.

  4. have you tried using Intel PROSet/Wireless manage my connection and Windows too, both give me the same slow speeds.

  5. uninstalled and reinstalled the drivers for my wireless card several times.

  I have another laptop with Vista, and who gets at least 15-17 Mbps on the wireless. I am now at a loss and plan to test external wireless card, so I can at least isolate the problem of my wireless card.

  I am currently using XP Professional Service Pack 3.

  Any thoughts?

  Thank you!

  
  

• How can I make my PC act as a router to connect to the Internet?

  How to make my PC act as a router

  Hey Microsoft,
  How can I make my PC act as a router to connect to the Internet?
  Could you please let me know? What should I actually configure the router?

  See you soon,.
  Charel Sisouvong

  Hello

  You need Virtual WiFi:

  You may not have that unless you try to connect to other WiFi devices via your computer and
  many WiFi devices and their drivers do not correctly support the virtual pilot.

  Check with the manufacturer of system and/or support updated real manufacturer Sites and WiFi device drivers.
  (Which is also updating the driver virtual.) If no new drivers WiFi are available then re - install the present
  one.

  Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
  version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
  Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using the methods
  below is preferred so that the latest drivers from the manufacturer of system and device manufacturers are
  found)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Download - SAVE - go where you put it - right click – RUN AS ADMIN.

  You can download several at once however restart after the installation of each of them.

  After watching the system manufacturer, you can check the manufacturer of the device an even newer version.
  (Those become your fonts of rescue system manufacturer).

  Repeat for network card (NIC) and is a good time to get the other updated drivers as
  Windows 7 like the updated drivers.

  ==========================================================================

  More information on what WiFi devices a virtual: (as noted above, if the device or the driver is not
  support the virtual device or is not required then it can be disabled).

  The WiFi device and the driver is installed must support a Virtual WiFi configuration. Check with the system
  Manufacturer support, their documentation online and drivers and ask in their forums (if any) known
  questions. If the wireless device is supported for OEM sound drivers, visit their site for updated drivers and
  known issues (Intel, Realtek, LinkSys and others).

  Windows 7 adds native Virtual WiFi from Microsoft Research technology
  http://www.iStartedSomething.com/20090516/Windows-7-native-virtual-WiFi-technology-Microsoft-research/

  How to setup virtual Wifi in Windows 7 without any additional software
  http://www.Blogsdna.com/5506/how-to-setup-virtual-WiFi-in-Windows-7-without-any-extra-software.htm

  Connectify allows possibility virtual WiFi in Windows 7 machines
  http://www.geek.com/articles/news/Connectify-enables-virtual-WiFi-ability-in-Windows-7-machines-2009112/

  On the wireless network hosted
  http://msdn.Microsoft.com/en-us/library/dd815243 (vs.85) .aspx

  Build a Wireless Home network without router - see Windows 7 section
  http://www.labnol.org/software/wireless-network-without-router/11494/

  Transform Windows 7 into Wifi Hot Spot with Virtual Router free tool
  http://News.lehsys.com/2009/11/turn-Windows-7-into-WiFi-hot-spot-with-virtual-router-free-tool/

  =========================================

  3rd Party Solutions

  Connectify is a software easy to use for Windows 7 computers router.
  http://www.Connectify.me/

  Virtual Router - Wifi Hot Spot for Windows 7 / 2008 R2
  http://virtualrouter.codeplex.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">