multiple selection of objects does not appear

Similar Questions

• OLE object does not appear when you open a. ODT file.

  I often get files from a source that uses an open office program. I am able to open the. ODT file, but embedded OLE object appears as text. The object is a logo, so I'm not all that concerned however, I wonder if there is a way to convert the file so that the OLE object appear to printing purposes. I downloaded an app named "Document converter" on the App Store and I am able to open .odt file in MS Word for Mac but the OLE object still does not appear. Ideas for a job here? As always, thanks in advance for your help.

  .ODT is a file "Open Document formaT". Word 2010 for Windows supports this format, but their infinite stupidity do not justify this in Word for Mac same word in 2016 of Office for Mac does not support this format. OLE stands for Object Linking and Embedding and was a way to incorporate one document inside another and I believe was originally designed by Microsoft. A typical example where it will be will work not on a Mac is when a Visio or project document is embedded in a Word document, because even if obviously a Mac can read Microsoft Word files it can read Microsoft Visio or Project files. In theory embedded Excel, Word or file of standard chart for example, jpg, png, etc. must be displayed on a Mac.

  I'm not aware of a way to determine what might be the embedded object.

  You could try various other programs that support this format e.g. OpenOffice and Google Docs and see if they do a better job to convert.

• Dynamic object does not appear at the time specified in the slide.

  @

  Here's my problem: when I insert a bubble in the slide, set it to appear after 5.0 seconds and the display for the rest of the slide, it does not appear at the specified time. HOWEVER, if I move the speech bubble to appear from the BEGINNING of the slide, then it pops up. I thought that maybe I needed to add an effect to make it work, so I chose the thought bubble, and then add an effect of "fly in" and set the time. It will not always appear at a specified time - that if I put it at the beginning of the slide.

  Here's my question: why the smart object (bubble) does not appear at a specific time, but it will appear if I put the time "appear after" at 0 seconds? I also have tried to move this on the timeline and it still shows only at the beginning of the slide.

  
  

  
  

  Thanks much for any help.

  Hello

  I notice that you have a couple of what appear to be objects Button. I have highlighted them in the image below:

  

  Click on each of them and look at their properties. Change the "Timing" the break after is more than 8 seconds.

  See you soon... Rick

• Selection "Edit in" does not appear

  After you select the Photoshop Elements under "change in", items display only momentarily, but then returns to LR.  Need to go to the taskbar and select the icon for the items for the items to display.  Something changed since this is a recent development.

  Thank you for responding.  The problem is corrected himself just as

  mysteriously, he has started.  The next time that I started in Lightroom, then

  the computer had been extinguished during the night, the photos were

  transferred to Photoshop Elements and is been displayed (i.e.,

  do not return to the screen of LR).  I hope it was just a strange

  anomaly.  Once again, thank you for answering so quickly.

• Resource object does not appear when a user provisioning

  A simple task, but I am not able to solve this problem.
  I have a dummy resource that I created for some tests. However, I am not able to see this resource when trying to configure a user for this resource.
  Any ideas?
  
  FYI:. I checked SelfService allow, allow all, Alow Multiple and checkboxes Autolaunch
  
  Thank you
  -Mahi

  Check your email.

  After asking a resource, check the details of approval in the menu drop down to the bottom..., you will see the task manager approval, approve it.

  Thank you
  Suren

• Flash object does not appear

  With the help of DW8.0.2, I've added a flash object to the model used in http://www.onyxfordfarms.com. The flash opens in FW and IE7 when I saw the model, however, after that I updated the pages, the flash is not displayed when I previews index.shtml. I compared the object between the model and the index.shtml code and it is identical.
  
  Also, when I download the files flash and index.shtml (other files not downloaded), I don't see the flash on the home page in any browser. However, if I display only the file flash ( http://www.onyxfordfarms.com/images/houseshowring2.swf), I can see it in FF and IE6 but not IE7.
  
  I'm totally lost - can someone point me to a solution?
  
  Thank you!

  You download this file?

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "heinelg" wrote in message
  News:f1nv03$4LG$1@forums. Macromedia.com...
  > With the help of DW8.0.2, I've added a flash object to the model used in
  > http://www.onyxfordfarms.com.The flash displays in FW and IE7 when I
  > get an overview of the model, however, after I updated the flash pages
  > don't
  > display when I previews index.shtml. I compared the object code between
  > the
  > model and the index.shtml and it is identical.
  >
  > Also, when I download the files flash and index.shtml (no other files not
  (> downloaded), I do not see the flash on the home page in any browser.
  > However, if
  > I displays only the flash file
  > ( http://www.onyxfordfarms.com/images/houseshowring2.swf), I can see it in
  > FF
  > and IE6 but not IE7.
  >
  > I'm totally lost - can someone point me to a solution?
  >
  > Thank you!
  >

• Selection of an object does not resize or by tilting more

  Suddenly, out of nowhere, something has changed in my interface.

  When I used to select an object, small squares appear on its corners allowing me to stretch or resize, as well as tilt.

  These guides have disappeared. After reset of the program and the computer, as well as research on all my settings to see if I've accidentally clicked something, I can't find the problem.

  Need help. Does not work like that.

  View > see the bounding box (make sure it is Hide Bounding Box)

  Shift + Ctrl + B

• How can I know if private browsing works? The purple mask does not appear when I click on the mask icon. In my privacy settings "never remember" is selected.

  I'm trying to confirm private browsing works. At the moment, I have no way of knowing whether or not it is enabled. The purple mask, referred to in the help does not appear when selected. I should say in my privacy settings, I have never chosen "remember", for the story.

  Hi willpublx, when you have selected never "remember history" in the privacy options so you are actually in 'permanent private browsing mode' and that there will be an extra mask icon to indicate that.

• 'Create a Windows 7 or a later version installation disc' does not appear as an option to select tasks

  I have a MacBook Pro (15 inch, late 2011) race El Capitan.  I just installed a new hard drive and am trying to install Windows 7 using Boot Camp Assistant.  In the window select tasks 'Create a later version or Windows 7 installation disk' does NOT appear as an option.  How to create the Setup disk?

  

  I use https://support.apple.com/en-us/HT205016 to get step by step instructions

  I have already created the disc image of the DVD install disk Windows following the instructions of https://support.apple.com/en-us/HT203909

  When I open Boot Camp Assistant I'm unable to create a Windows 7 installation disc

• When I press email and attach the photo, my email 'box' does not appear as formerly, and still on the bottom of the screen it says "1 selected item."

  When I press email and attach the photo, my email 'box' does not appear as formerly, and still on the bottom of the screen it says "1 selected item."   And I also waited for a period of time as well very reasonable.  What can I do?

  original title: EMAILING A PHOTO OF "LIBRARIES/IMAGES".

  Hi BrianS.OR,

  1 are you referring to the client program webmail or email?

  2. what e-mail on the computer client program do you use? Is - this Windows Mail or Windows Live Mail?

  3. What size are the image files?

  4. did you of recent changes on the system?

  You can temporarily disable a security software and firewall installed on the system and check if the problem persists.

  Note: Be sure to enable the security software on the computer after checking.

  Hope this information is useful.

• Windows Media Player does not appear in the window when selected

  When you select Windows Media Player window does not appear, however, the 'media player logo' appears in the taskbar, including the thumbnail with my videos shown. When I click on the "logo media player" in the taskbar in the main window just flashes on the screen and does not remain.  Help would be appreciated

  Oscardog,

  I posted this article, assuming you had Windows 7 on your computer. My bad. Sorry about that!

  Make SFC scan and check if any system files are intact and fine.

  See http://support.microsoft.com/kb/929833

  In addition, create a new user and check the status.

• Why when I choose a photo in the library grid view it does not appear in the window to develop up to selected in the Filmstrip below?

  Why when I choose a photo in the library grid view it does not appear in the window to develop up to selected in the Filmstrip below?

  It was the strangest thing, but I think I solved the problem. Use the CC version 2015.1 on a Wacom tablet using Win 8.1 and inadvertently from the same batch of photos, I had downloaded twice and it was very confusing because it did not prevent the duplication of files, but the files where not really there. I didn't know whether to remove or delete the files with question marks for fear of destroying a link or something so merged files and now everything works as it should, once chosen in the library that the photo appears in develop mode.

• vCAC 6.0 selected clone - model Action Plan has been updated, now, it does not appear in the vCAC

  Hi all

  I have been playing with vCAC 6.0 for quite awhile (now updated vCAC 6.0.1) and have created a plan that will clone with Windows Server R2 model 2012. Comments agent has not been installed because I wanted only to lift the machine up and running with customization specifications created in vCenter.

  The plan was working as expected after I created the service, part of the catalogue and clearances. After that, I converted the virtual computer model to update the model with new Windows patches, and then convert back to model. Now when I try to create a new master plan, selected the workflow of clone and search for the model, the model that I've updated does not exist in the list. Curious, too, I went to change the blueprint and attempted to review for the model, and it does not appear on the list more. In fact, I created a model of linux (CentOS) at some point after the installation of the vCAC, and I don't see the list as well.

  
  

  No idea on what is happening? Newspapers in the Infrastructure tab-> monitoring-> Log was not showing errors, and I tried to restart all the components of vCAC, including a restart of all services on the server of IaaS.

  Probably, you have to manually kick off the collection of inventory data on computing resources where the model.

• Selection of drop-down list box does not appear

  I've read several display on this site and others.  I can't find the right solution to get the drop-down list box to work.  I publish for Flash player 10 and AS 2.  The final file will be imported into an Articulate/PPT file.

  I'm simulating a form that my audience must fill.  2 text fields, I use a drop-down list box to select the appropriate entry.  If they leave the screen of the form, I need save their answers, so they need not start from the beginning.  I use global variables.

  My problem occurs when I try to fill the drop-down list using the previously selected public response box.  I tried to use setSelectedIndex.  It works insofar as the choice highlights in the drop-down list box, but the actual selection does not appear in the text box.  What I do pay Combobox.text = selection?

  just assign the selectedIndex property.

• Drop-down list does not appear selected value

  Hello
  
  I have a problem. The output of a query results page. There are 2 fields must be updated: scholarshipID and amount. I want to update my request at a time. My dynamic drop-down list does not appear selected value. The value is there, but it does not recognize in the drop-down list. I could not find the error. My code is below, so please help...
  
  < name cfquery = "getStudentsData" datasource = "#application. DSN #">"
  Select StudentID, fname, lname, GPA, Tbl_Students.ID, ScholarshipID, rise, Tbl_StudentsScholar.ID as the SSID, AwardStatus
  of Tbl_Students, Tbl_ApplyYear, Tbl_EduBckgrnd, Tbl_StudentsScholar
  where Tbl_Students.ApplyYr = Tbl_ApplyYear.id
  and Tbl_Students.id = Tbl_EduBckgrnd.SID
  and Tbl_Students.ID = Tbl_StudentsScholar.SID
  and ApplyYear = 1
  and steps = 7
  order by studentid
  < / cfquery >
  
  < name cfquery = "getScholarship" datasource = "#application. DSN #">"
  Select AcctNum, scholarship, Tbl_Scholarships.id, Code
  of Tbl_Scholarships, Tbl_DistCode
  where Tbl_Scholarships.DistCode = Tbl_DistCode.id
  AcctNum order
  < / cfquery >
  
  < cfparam name = 'X' default '0' = >
  < cfparam name = default "CounterX" = "0" >
  
  <!--get scholarship-->
  
  < cfif getStudentsDataRet.RecordCount eq 0 >
  < class p 'paragraph' = > No Records Found < /p >
  < class p = "pageheight" > < / p >
  < class p = "pageheight" > < / p >
  < cfelse >
  
  
  < class p = "submitmessage" > records found - < cfoutput > #getStudentsDataRet.Recordcount # < / cfoutput > < / p >
  < table width = "98%" border = "1" cellpadding = "3" cellspacing = "0" style = "" border-collapse: collapse "bordercolor ="#000000"align ="center">"
  < class tr = "steptext2" bgcolor = "#999999" align = "center" >
  < td width = "10%" > Student ID < table >
  < td width = "9%" > name < table >
  < td width = "9%" > name < table >
  < td width = "5%" > GPA Cum < table >
  < td width = "5%" > account # < table >
  < td width = "5%" > < table > amount
  < td width = "20%" > account # | Dist Code | Scholarship name < table >
  < /tr >
  
  < do action = "updateAward.cfm" method = "post" name = "AwardForm" > "
  < cfoutput query = "getStudentsDataRet" >
  < cfif eq x 0 and x neq getStudentsDataRet.recordcount >
  < cfset x = 1 >
  < cfelseif x neq (getStudentsDataRet.recordcount + 1) >
  < cfset x = x + 1 >
  < / cfif >
  < class = "paragraph" tr >
  < td > #StudentID # < table >
  < td > #lname # < table >
  < td > #fname # < table >
  < td > #GPA # < table >
  
  
  < cfif AwardStatus eq 2 >
  < name cfquery = "getStudentsScholar" datasource = "#application. DSN #">"
  Select Code, Tbl_Scholarships.id, AcctNum, scholarships
  of Tbl_Scholarships, Tbl_DistCode
  where Tbl_Scholarships.DistCode = Tbl_DistCode.id
  and Tbl_Scholarships.ID = #getStudentsDataRet.ScholarshipID #.
  < / cfquery >
  < / cfif >
  < td >
  < select name = "" scholarshipID_ #X # "onChange =" showMessage_ #X #(this.options[this.selectedIndex].value) ">"
  < option value = "" > < / option >
  < cfloop query = "getScholarshipRet" >
  < option value = "" #id # "selected < cfif getStudentsDataRet.ScholarshipID eq id > < / cfif > > #AcctNum # < / option >"
  < / cfloop >
  < / select >
  < table >
  < td > < input name = "" amount_ #X # "type ="text"size ="5"< cfif amount gt 0 > value = ' #NumberFormat (amount, 99.99) # ' < / cfif > / > < table >"
  < td > < cfif AwardStatus eq 2 > #getStudentsScholar.AcctNum # | #getStudentsScholar.Code # | #getStudentsScholar.Scholarship # | #getStudentsDataRet.ScholarshipID # < / cfif > < table >
  "< input name =" "IndexID_ #x #" type = "hidden" value = "#SSID #" / >
  < /tr >
  < / cfoutput >
  < cfoutput > < input name = "CounterX" type = "hidden" value = "" #getStudentsDataRet.RecordCount # "/ > < / cfoutput >"
  < b >
  < td align = "center" colspan = "11" height = "50" valign = "middle" > < input name = "Submit" type = "submit" value = "Submit" / > < table >
  < /tr >
  < / make >
  < /table >
  < / cfif >
  

  the syntax is: getStudentsDataRet.ScholarshipID [1]

  where '1' is the line number to specify