Multiprocessor Configuration does not support the installation of Windows 7 64-bit.

Similar Questions

• G4-1303AU of the HP Pavilion: HP my laptop works does not properly after installation of window 7ultimate 64-bit

  This laptop is provided by UP Govt (INDIA). I installed windows ultimate 64-bit, 2 days ago and installed all the drivers. But there are two pilots who is errors. These are some

  1)PCI device- ERROR IS- the drivers for this device are not installed. (Code 28)

  Hardware ID is

  PCI\VEN_10EC & DEV_5209 & SUBSYS_3564103C & REV_01
  PCI\VEN_10EC & DEV_5209 & SUBSYS_3564103C
  PCI\VEN_10EC & DEV_5209 & CC_FF0000
  PCI\VEN_10EC & DEV_5209 & CC_FF00

  2)Ethernet Controller- ERROR IS - the drivers for this device are not installed. (Code 28)

  Hardware ID is

  PCI\VEN_10EC & DEV_8136 & SUBSYS_3564103C & REV_05
  PCI\VEN_10EC & DEV_8136 & SUBSYS_3564103C
  PCI\VEN_10EC & DEV_8136 & CC_020000
  PCI\VEN_10EC & DEV_8136 & CC_0200

  My main problem is this laptop is hangig too permanently. I do not know what is the exact reason and how do I... Its heating not so it's null chance of warming... I want to get rid of this problem of hanging. Please give me link to download the real drivers and the solution for this problem of hanging... As it was not hangig earlier on Windows 7 Home Basic (provided by Hp)

  Hello:

  Here are links to the drivers you need...

  PCI\VEN_10EC & DEV_5209:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-103100-1&cc=us&DLC=en&LC=en&OS=4063&productOid=5280050&sw_lang=&product=5280049

  PCI\VEN_10EC & DEV_8136:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100079-2&cc=us&DLC=en&LC=en&OS=4063&productOid=5280050&sw_lang=&product=5280049

  The only suggestion I can offer regarding the laptop works is not so good is to download and install the drivers for the chipset amd from the link below and restart.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

• Qosmio G50 will not complete the installation of Windows 7 64 bit

  Hello world!

  I recently wanted to updated my Qosmio G50 - 12f 32-bit from vista to 7 ultimate 64-bit. I did a clean install: formatted the c partition.

  Everything seemed to work fine until the screen "Setup is preparing your computer for first use. At first, I thought it froze just would not go further. Back to zero (in all modes) would get the same effect.
  But to my surprise and pleasure, she managed to pass this point when I desperately wanted to wait long enough for a miracle to happen. But the problems remain. The configuration process is right! REALLY! slow. I could painfully spend the first screens, like enter the name of the computer, activation screen, modes of security, but with a very long wait time between each. And every time he reaches this final screen of security modes that she would suddenly go to a BSOD:

  Driver power state failure
  STOP 0x0000009F (0xFFFFFA800193DD70, 0xFFFFF80000B9C518, 0 x 0000000000000003, 0xFFFFFA80029C8610)

  Please, anyone have any ideas on how to solve this problem?

  Of course, there should be a driver problem, but how do I update all the drivers without operating system running? I've seen such a feature in the repair of the installation DVD section, but it accepts only .inf files.
  And I can t find those anywhere on the toshiba support website. Only the .exe that you run from your operating system that is already running.

  In any case the Qosmio G50 was not as incompatible with 7-64 bit. So I'm a little confused here!

  Please help ^ ^

  Hello

  I want to ask you about the Windows Vista Dvd disc. Is - this original type one or more of the Assembly?

• I need to install Silverlight, but when I download the installer and run it, it tell me that 'your operating system does not support the 64-bit version of Silverlight.

  Silverlight installation problems

  I need to install Silverlight, but when I download the installer and run it, it tell me that 'your operating system does not support the 64-bit version of Silverlight. I have Vista Ultimate, a 64-bit system.  Help, please.

  Hello

  It's the operating system Vista Installation Forum.

  Microsoft has set up Forums to specifically to questions of Silverlight.

  They should be able to help you there.

  http://forums.Silverlight.NET/

  See you soon.

• Error: The system does not meet the installation requirements. the software does not support this versio

  1 LASERJET PRO CP1525nw

  2. Windows XP

  3 error: the system does not satisfy the installation requirements. the software does not support this version of Windows. Search hp.com for more information on this product compared to this error.

  4. no change

  Thanks, but I arrived on the support desk and the problem was that for XP, you use the printer Install "Option in the drop down box and then select the"TCP/IP"Port, if you choose the option 'Wireless'.

• Storage Array Type Config path: ATAS VMW_SATP_SVC does not support the configuration of the path on ESXi 5.0 u1

  Hello

  Below for the output of my blade IBM HS22., are there any problems with the configuration of the path.

  List of paths esxcli storage nmp
  SAS.5005076b08b7aaa4 - sas.a9501097faba7a - naa.600508e0000000007abafa971050a900
  The Runtime name: vmhba0:C1:T1:L0
  Feature: naa.600508e0000000007abafa971050a900
  Full device name: FREE Serial Attached SCSI (naa.600508e0000000007abafa971050a900) drive
  Group status: Active
  Table priority: 0
  Storage Array Type Config path: ATAS VMW_SATP_LOCAL does not support the configuration of the path.
  Path selection policy path Config: {current: Yes; favorite: Yes}

  FC.2fff0000c900009f:2ffd0000c900009f - fc.500507680100 b b 680 680:500507680130 - naa.60050768018105afc000000000000df0
  The Runtime name: vmhba2:C0:T3:L2
  Feature: naa.60050768018105afc000000000000df0
  Full device name: disk of IBM Fibre Channel (naa.60050768018105afc000000000000df0)
  Group status: Active
  Table priority: 0
  Storage Array Type Config path: ATAS VMW_SATP_SVC does not support the configuration of the path.
  Path selection policy path Config: {current: Yes; favorite: Yes}

  Kind regards

  Surya

  Hi Surya,

  No, it's not any problem with the configuration of your path.

  It only means that this policy does not allow additional configuration.

  I.e. with fixed NMP, you would be able to configure a preferred path allowing you to manually distribute the i/o load.

  Your current configuration does not offer this option.

  Kind regards

  Ralf

• Error "this Setup does not support the target platform.

  I need solve the problem 'this Setup does not support the target platform' Please help me :'(

  See these two sites:

  http://forums.Comodo.com/install-Setup-configuration-help-CIS/this-installation-does-not-support-the-target-platform-t59001.0.html

  http://forums.Comodo.com/install-Setup-configuration-help-CIS/firewall-wont-install-this-installation-does-not-support-the-target-platform-t61629.0.html;msg434058

  Comodo is apparently the problem.

• Norton AntiVirus 2005 does not support the repair feature

  Hello

  I ask for help I always get this message error/dialogue:
  "Norton AntiVirus 2005 does not support the repair feature, please uninstall and reinstall"
  along with
  "Please while Windows configures Norton AntiVirus 2005"

  Use the product Recovery CD from TOSHIBA L20? This will affect other tools than Norton?
  Just for mentinon, I have a dual boot linux/Windows.

  Thanks for your reply.
  Kind regards
  Eliyah

  Hello

  I recommend to check the tips on the Symantec Norton:
  http://Service1.Symantec.com/support/NAV.nsf/docid/2004090712504306?OpenDocument&LG=en&CT=UK&SEG=HHO& src = eu_hot

  > Use the recovery CD to the L-20 TOSHIBA product? This will affect other tools than Norton?
  The use of the recovery CD will set your laptop to original settings.
  I mean, the recovery CD will format the whole HARD drive and will delete all your files

• Why the new cRIO-9076 does not support the scanning engine?

  I spec'd a new chassis cRIO-9076 spiffy but learned that, despite its impressive capabilities, it does not support the analytical engine.

  I'm curious as to why this is.  I hope that this is not an indication of support OR away from the scan engine and perhaps NSV technology as well.

  OK, uninstalled and reinstalled OR RIO 4.0 and now all is well, guess it was just one of those inexplicable installation problems.

• Graphics card does not support the required version of DirectX 9.0

  Problem message: this problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  My question is what that update of video card do I download to fix this problem and where can I find.

  Problem message: this problem occurred because your graphics card does not support the required version of DirectX. This version of Windows requires a DirectX 9.0 compatible video card or newer.  My question is what that update of video card do I download to fix this problem and where can I find.

  =========================================
  It may be interesting to try to go to support
  site Web of MFG. your video card and
  search for course Windows XP Compatible
  drivers.

  (FWIW... If your computer is a laptop... check
  the manufacturer of the comput4er one
  updated video driver)

  If you do not know the make and model of
  your video card... check documentation
  supplied with the computer.

  Also, you can try the following steps...
  Reach... Start / run... type...
  Msinfo32... Press on enter.

  On screen Information System... Choose...
  Components / display...

  You should find the make and model of your
  adapter display as well as the version of the driver.

  If the driver on the Web site is no longer
  current than you run...
  Download and install it. Also, you should find
  and follow the installation instructions on the
  support site. John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• "Your operating system does not support the 64-bit version of Silverlight" when you try to install Silverlight on your computer.

  Original title: Silverlight problem

  OK, so something was wrong when I was watching Netflix and I had to uninstall Silverlight. When I tried to reinstall it, it says "your operating system does not support the 64-bit version of Silverlight". I have a 64-bit version of Vista and I use Chrome. Can anyone help? I don't want to lose to Netflix.

  OK, so something was wrong when I was watching Netflix and I had to uninstall Silverlight. When I tried to reinstall it, it says "your operating system does not support the 64-bit version of Silverlight". I have a 64-bit version of Vista and I use Chrome. Can anyone help? I don't want to lose to Netflix.

  Clean installation of silverlight and reinstall...

  How to clean a facility damaged Silverlight and then reinstall Silverlight

  http://support.Microsoft.com/kb/2608523

• The system does not support the mode full screen for cmd

  Respected Sir/Madam

  I am user of Windows vista HOme basic... .also I have Windows 7 user... I'm basicllly, a student in computer engineering...

  I get an error "The system does not support the mode full screen" for cmd.exe in C++ turboo or JDK.. .then I getproblem by entering n compiled the program...

  my PC configuration is

  :-AMD 6000 + dual core Athlon 64 X processor

  Monitor:-Viewsoni

  RAM :-1Go

  Please give me a solution to problem 4 I wanted to run cmd mode full screen...

  your help will be appreciated by me highlly...

  thanking you

  Philippe

  Vista + do not support a command prompt full screen, as indicated by the message. You can manipulate the available to the command window to specify the width and height to be as big as you want, but this isn't quite the same thing...

• BlackBerry Z10 BlackBerry Desktop Software does not support the BlackBerry 10 operating system

  I am wanting to sync the Z10 with my Mac andhave times link BB and BB Desktop Software but the message it gives me is:

  This BlackBerry device running the BlackBerry 10 operating system.  BlackBerry Desktop Software does not support the BlackBerry 10 operating system. Visit www.blackberry.com/support to learn more about how to synchronize your multimedia files, backup and restore data from the camera and more, with your device.

  All software are up to date on Mac and BBZ10

  What should I do?

  You have the two desktop software and link configurΘ for dΘmarrer when a device is connected to your Mac. You must go into the Desktop software settings (I don't remember exactly what to do, but there should be some settings at the top right) and set it to not open when a device is connected. Once you have it set to not open when your phone is connected, make sure that the link is set to open. That should solve your problem.

  Let us know if that helps you.

• File error Windows Media Player mp4 "Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file"

  I got this error message when you try to play an MP4 video. Help please!

  Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file.

  You can try to download the http://www.microsoft.com/en-gb/download/details.aspx?id=507 Codec Installation Package

  If this does not work, you may need to get some third party software to convert MP4 video to the longer Windows Media Player video format supported like WMV, AVI in order to solve the problem

• Unable to show a WMV file, because Windows 7 does not support the G2M4 codec

  I use windows 7 and I got a file wmv of my employer.  When I try to see I hear it but I can't.  The message I get is:

  "No decoder module appropriate:

  VLC does not support the audio or video format "G2M4". Unfortunately it is impossible for you to solve this problem. »

  Try to open in Windows Media Player and get this message "Windows Media Center cannot play the file because the required video codec is not installed on your computer."

  Tried to download the current codec installation package and I got the message "the program is blocked due to compatibility issues".

  Run the fixit from Microsoft to search for any missing codec and the report that came back that no codec is missing.

  Please tell me there is a way that this can be corrected.

  It might be worth a try to re - encode the. WMV file.

  In many cases, I found that convert a. WMV file
  to the. WMV format could produce a new version of the
  compatible file. Sounds redundant, I know, but it
  can work.

  Microsoft Expression Encoder 4 can perform the conversion.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Download Microsoft Expression Encoder 4 with Service Pack 1 (SP1) (freeware)
  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24601

  +++

  If you want to try Expression Encoder 4 following
  info can be useful:

  Start Microsoft Expression Encoder 4
  (Start / programs / Microsoft Expression /)
  Microsoft Expression Encoder 4)

  On the "Load a new project" screen...
  Left click... "Transcoding project '...

  When the program opens, click on... File / import...

  Left click (highlight) the. Left and WMV file, click the Open button.

  You will see the file in the "Multimedia content" pane

  In the right column... left click on the tab "Output"...

  Open the drop directory window and choose an output folder.
  (This is where you will find your converted file)

  On the left, click on the button "encode".

  Wait... video encoding CPU intensive and can
  be a slow process. It is always best if you do not have
  multi-task while files are encoded.