Muse publishing-site stops at 10% with no error code

Similar Questions

• I get a message says "the site is unavailable at this time" with the error code [0 x 80070424].

  Original title: error code [0 x 80070424]

  My security alerts continues to tell me that the automatic updates are disabled. I check in the Security Center, and they are in position "on", but it won't download updates. When I go to the Microsoft website to update directly, I get a message says "the site is unavailable at this time" with the error code [0 x 80070424]. Microsoft doesn't even have it classified as a potential error code. I checked the status of the Fund Manager and it is set to "Auto" and it is started, but does not resolve the issue.

  Hello

  You did changes to the computer before this problem?

  Try the troubleshooting provided in the article below steps and check if it helps.

  Error message when you use Microsoft Update or Windows Update Web sites to install updates: 0 x 80070424
  http://support.Microsoft.com/kb/968002

• Home Vista premium: KB978338 fails with the error code 80004005

  Cannot install other updates windows update screws. Impossible to find answers to this specific problem, all the links seem to point to XP or windows 7

  Went to the Microsoft site and just tried to download and install just the fix KB978338, watched as she worked, system has rebooted with what looked like 266/266/registry component machine appearing on the screen just after the message of the HP bios and just before loading windows.  The PC then realized... Updates not configured correctly - returning changes.

  Seem to be stuck in this loop that KB978338 will not install and stops all other updates installation as all fails with the error code 800F0826.

  Hi gbislay,

  I think that you are able to get on the desktop after changes have been restored.

  Step 1: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Step 2: Download and run the system update tool. This tool runs an ad hoc analysis of inconsistencies that might prevent future maintenance operations.

  The system update tool

   

  Step 3: Clean boot the computer

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Important: n ' forget not to put the computer to follow normal start-up step 7 in the link.

  Step 4: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the mouse and keyboard and then try to install the updates.

  You can see the steps outlined in the article below, which deals with a similar question

  Windows Update error 800f0826

  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7

  Service pack Windows Vista and Windows Server 2008 install fails with error 0x80004005

   

  Note: Steps to solve the problem of Windows Update for Windows 7 is valid for Windows Vista.

  Thanks and greetings
  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  KB2183416 Windows Update for IE8 repeatedly fails with the error code "WindowsUpdate_8007371C" "WindowsUpdate_dt000"

  Whenever I run this update, it seems that it installs about 90% of the way but then stops and breaks down about 20 seconds later.  If someone else sees this problem and is at - it a solution?  I'm running Vista Home Premium SP2 and KB2183461 is listed as a critical update for my system.  Help?

  Preliminary stage: If the Tea Timer of Spybot is enabled, please disabled until we finished this thread. Seehttp://aumha.net/viewtopic.php?f=26&t=32409

  Tip: If you don't fully understand what Tea Timer does and how it does, leave it disabled permanently.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  McAfee applications (and Norton) are known for not not upgrade (or uninstall) "clean". If you have McAfee Security Center installed since you bought the computer, he is been updated (automatically) several times. Try the following:

  1. run this triple McAfee fix: http://service.mcafee.com/FAQDocument.aspx?id=TS100507

  2. after reinstallation of McAfee Security Center to step #3 patch triple, manually & repeatedly updated McAfee Security Center until you get one invite "no updates more".

  3. OPTIONAL: If you have had problems with IE8, open IE8 (only) to http://support.microsoft.com/kb/923737 & run the difficulty.

  4. OPTIONAL STEP: Open IE8 (only) to http://support.microsoft.com/kb/971058 & run the difficulty by DEFAULT inside and modes and AGGRESSIVE. [1]

  5 restart and test by launching a manual check of updates & see if KB2183461 now installs. See...

  How will I know if my computer is up to date?
  http://Windows.Microsoft.com/en-us/Windows-Vista/how-can-I-tell-if-my-computer-is-up-to-date

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not list the updates installed in Add/Remove Programs (Windows XP) or updates installed (Vista & Win7).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• 12 security update and still in pending with 80242014 error code

  I'm running a vista 32 nome. I noticed that my windows update will always try to updated. some things get updtaed however more security updates are not. they all have an error code 80242014. the last update for vista (kb981332) worked and updated but there are 12 others that are still pending. It is the list of all updates on hold with this error code.  KB973917 KB975561, KB908182, KB978338 KB977816, KB978601, KB981349, KB979683, KB980232, KB980182.

  I don't know what it takes in this respect can someone please advise.

  Thank you

  External drives (including flash & SDCards readers) should consider suspect/infected, too, at this point.

  After doing the clean install, do NOT connect any such player to the computer until you've taken care of everything in my previous post (especially KB971029 manually install).

  Before you transfer the data saved on your main drive, run a full scan of the system on data using your anti-virus/anti-spyware applications freshly installed & updated updated (and perhaps this scan online: http://onecare.live.com/site/en-us/center/whatsnew.htm).

  Speaking of which, you can consider installing Microsoft Security Essentials (free) instead of the application of McAfee or, indeed, any other app/AV security suite:http://www.microsoft.com/security_essentials/default.aspx

  PS: I would also say very strongly change all of your passwords both now and regularly thereafter. See:

  http://www.Microsoft.com/protect/fraud/passwords/create.aspx and

  http://www.Microsoft.com/protect/fraud/passwords/checker.aspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Help me with WindowsUpdate_80070490 error code""WindowsUpdate_dt000"

  Help me with WindowsUpdate_80070490 error code""WindowsUpdate_dt000"does that mean?

  Please read: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/1467f44b-ee27-4f7d-98d7-f1c4b35b3395

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?

  A (another) Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  You receive an error code "0 x 80070490" when you use Microsoft Update or Windows Update Web sites to install updates
  http://support.Microsoft.com/kb/958044

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• help me with this error code 80070005 Code...

  help me with this error code 80070005 Code...
  my windows is not updated for a few days...
  Please help me...

  You don't have to know which operating system you use, this discussion is for Windows XP, etc. of Vista and Windows 7.

  Error message when you use Microsoft Update or Windows Update Web sites to install updates on Windows 2000, Windows XP and Windows Server 2003: 0 x 80070005
  http://support.Microsoft.com/kb/968003/

  If you are using Vista, then the denied access is handled differently-
  

  Error code 0 x 80070005 is also described as ACCESS DENIED (you may not to install updates.

  Please check that you are logged into an account with administrative privileges.

  Please follow these instructions if you encounter this error code during checking or install updates via Windows Udpate.  What follows applies only to Windows Vista.

  1. Download AccessChk (Sysinternals).  This tool allows you to assess the level of access of some users or groups of resources, including files, directories, registry keys, global objects and Windows services.  Here is the link to download the tool: http://technet.microsoft.com/en-us/sysinternals/bb664922.aspx

  2. save the zip on your desktop and extract the file:
  -Right-click on the file and select extract all...
  -Click Next when prompted for the Destination.

  Therefore, you should see a folder called AccessChk on your desktop.

  3. open the folder AccessChk

  4 press and hold the shift key and right-click in the window.  Select "open here command prompt.

  5. a command prompt window should open a similar message:
  C:\Users\\Desktop\accesschk >

  6. type the following command and press ENTER:
  "" AccessChk.exe "nt service TrustedInstaller" s - n k ' hklm\software\Microsoft\Windows\CurrentVersion\Component Based Servicing "> accesskchk.txt
  Tip: You should be able to copy and paste the command into the command prompt.

  7. close the command prompt window.  Open the Accesschk folder on your desktop (if it has been closed).

  8. double-click on Accesschk.txt (text file), it should open Notepad.

  If this is insufficient,

  1 if please download the subinacl.msi from the following link and save the patch to installation on the desktop:
   
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=e8ba3e56-d8fe-4A91-93Cf-ed6985e3927b&displaylang=en#AffinityDownloads
  SubInACL (SubInACL.exe)
   
  2. go to your desktop and double-click on the downloaded file.
  3. Please select the C:\Windows\System32 folder as the Destination folder during installation. Later, we will use this tool to reset the permissions on the current computer settings.
  4. click on the button 'Start' in the 'Search' bar type: "Notepad" (without the quotes) and press ENTER.
  5. copy the following commands, and then paste them into the opened Notepad window:
   
  off @echo
   
  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = administrators = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = administrators = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = administrators = f
  Subinacl /subkeyreg HKEY_LOCAL_MACHINE/Grant = system = f
  Subinacl /subkeyreg HKEY_CURRENT_USER/Grant = system = f
  Subinacl /subkeyreg HKEY_CLASSES_ROOT/Grant = system = f
  Subinacl % lecteur_systeme % /subdirectories / Grant = system = f
   
  @Echo =========================
  Completed @Echo.
  @Echo =========================
  @pause
   
  6. After you paste the above commands, please close the Notepad window. Choose "Save" when you are prompted to save the file. Type "reset.bat" as the file name and choose "Desktop" in the Panel on the left as the save location.

  7. refer to the desktop and right click the reset.bat file, then choose "Run as Administrator".

  8. you will see a window of type BACK treatment.
   
  NOTE: It may take several minutes, please be patient. When it is finished, you will be prompted with the message: "finished, press any key to continue."

  Note: On some driver update installation procedure, we also received this error code, please redirect this kind of case to the Team System Vista, because it can be considered for structure of third-party programs.

  Look for updates after that.

  Hope this information is useful.

  This problem may be caused by third-party security programs such as firewalls and antivirus software. You can disable or remove to check the issue.

  From: Microsoft Answers Support Engineer

  TaurArian [MVP] 2005-2010 - Update Services

• kb2633171 a security update wont install windows vista and keeps on saying failed in the history of updates with the error code 80070020

  Original title: kb2633171 security update will not install windows vista

  Hello

  as noted above, the kb2633171 of security update will not install on my computer used windows vista laptop. I had mcafee installed since the first day (it came with the pc). He continues saying failed in the history of updates with the error code 80070020. When I restart the pc, it says that it cannot configure the update and it is up to the old settings.

  I ran the fix it and aggressive to solve this problem, no luck :-(

  any help muchly appreciated.
  Thank you!

  Chiara

  Hi Chiara,

  Try following the steps in the following article.

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825

   

  Let us know if it helps.

• Tried to install KB2447961. This failed with the error code 770.

  Tried to install KB2447961. This failed with the error code 770.

  http://support.Microsoft.com/kb/2447961

  How to get help and support for this security update

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  http://support.Microsoft.com/common/international.aspx?rdpath=4           

  North American customers can also obtain instant access to unlimited free support by email or unlimited individual chat by visiting the following Microsoft Web site:

  http://support.Microsoft.com/OAS/default.aspx?&PRID=7552           
  UTC/GMT is 19:27 Saturday, September 17, 2011

• Update KB951847 failed with the error code 80200053

  Day before yesterday I did a reset (this was described to me, basically as a reformatting of all readers and a reinstallation of original software) on my desktop HP with Vista x 64.  Yesterday, I was doing the Microsoft Updates (I think he had 101 in total which stood for me).  All of the except KB951847 installed correctly.  When he reached KB951847 it says it failed with the error code 80200053.

  I read on another thread that security antivirus software or others could cause this problem, but I still have to install it all because I read that it can interfere with some updates from Microsoft.

  If anyone has solutions, I would be very grateful.

  Choose one or two-online http://www.google.com/search?hl=en&rls=com.microsoft:en-US&q=+site:answers.microsoft.com+KB951847+%2B+optional+%2B+hide&biw=1003&bih=589

• Windows 7 backup error: the file is corrupt or has been tampered with. Error code is 0 X 80041321

  After coming back to Windows 7 pro to windows 10 I'm not long able to back up my computer.  I get an error message saying: the file is corrupt or has been tampered with.  Error code is 0 X 80041321.  Any help will be greatly appreciated.

  Original title: backup Windows 7

  Hi Mark,

  Thanks for posting your query in Microsoft Community.

  I would say first of all allows you to check if the Volume Shadow Copy service is running.

  1. click on Start, type Services in start search. When the page is open, find shadow copy Volume service.

  2. right clickon the Volume Shadow Copy service (VSS) and check whether it is started.

  3. If it is stopped, select Start or restart.

  Check if you are able to backup.

  Step 2: If you have installed a third-party security software, then try to temporarily disable the security software and check what is happening.

  Step 3: You can also try to remove the task from the location:
  
  C:\Windows\System32\Tasks

  How to find which task is damaged or altered.

  3. click on Start; Search type cmd in the list on the start menu, programs, right click on cmd and run as administrator.
  4. now run the following command

  schtasks/query | findstr /i

  Search:

  ERROR: the task image is damaged or has been tampered with.
  ERROR: task cannot be loaded: the task name

  Find the name of the task, try deleting the task name, and then try to recreate.

  See the link below that solves your problem.

  http://social.technet.Microsoft.com/forums/en-us/itprovistaapps/thread/dcb0fb2b-d1e3-4562-823f-cee16bfa4945

  1. click on Start, type Task Scheduler in the start search box, and then click Task Scheduler in the list programs.

  If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  2. in the Actions of the Task Scheduler dialog box, click on create a new task.

  Check whether the problem is resolved.

  Hope this information is useful. Let us know if you need more help, we will be happy to help you.

• How to make the output of Sql Plus with an error Code

  Dear members,
  
  How can I define sql more exit with an error code.
  
  We have a simultaneous host program. The executable is a shell script for this program. This sql script Shell script request which in turn gives call to a custom database package that I built.
  
  The flow rate is:
  
  
  -> SQL-> CUSTOM PACKAGE SCRIPT SHELL SCRIPT
  
  Custom package has two PARAMETERS of the error indicator and the error message. If something fails in the package these two PARAMETERS is returned with a value.
  
  So my sql script code looks like this:
  
  WHENEVER SQLERROR EXIT 251
  WHEN the OSERROR EXIT 251
  Set serveroutput size 1000000
  set linesize 32767
  set verify off
  set the position
  Set feedback off
  
  DECLARE
  x_error_message VARCHAR2 (1000);
  x_sql_message VARCHAR2 (1000);
  x_exception EXCEPTION;
  e_value NUMBER;
  
  BEGIN
  dbms_output.put_line ('Inside sql file');
  
  
  XXpackage.xxproc (x_error_message, x_sql_message);
  
  
  IF (x_error_message IS NOT NULL) AND (x_sql_message IS NOT NULL) THEN
  RAISE x_exception;
  END IF;
  
  
  EXCEPTION
  WHEN X_EXCEPTION THEN
  e_value: = 1;
  DBMS_OUTPUT. Put_line (' Exit Code: ' | e_value);
  DBMS_OUTPUT. Put_line ('X_EXCEPTION: EXCEPTION IN SCRIPT xpoext04a.sql :'||) SQLERRM);
  DBMS_OUTPUT. Put_line ('x_error_message is: ' | x_error_message);
  DBMS_OUTPUT. Put_line ('x_sql_message is: ' | x_sql_message);
  DBMS_OUTPUT. PUT_LINE (' ERROR IS: ' |) SQLERRM);
  WHILE OTHERS THEN
  e_value: = 252;
  DBMS_OUTPUT. Put_line (' Exit Code: ' | e_value);
  DBMS_OUTPUT. Put_line (' OTHER: EXCEPTION IN SCRIPT xpoext04a.sql :'||) SQLERRM);
  DBMS_OUTPUT. Put_line ('x_error_message is: ' | x_error_message);
  DBMS_OUTPUT. Put_line ('x_sql_message is: ' | x_sql_message);
  DBMS_OUTPUT. PUT_LINE (' ERROR IS: ' |) SQLERRM);
  
  
  END;
  */*
  output
  */*
  
  
  As you can see from above, if the two PARAMETERS have value, then it goes to an exception.
  
  My problem is that if it goes with the exception of X_EXCEPTION, the sql is not come away with a mistake. I mean sql is not treat this case like a sqlerror.
  
  
  How can do us more sql dating a sqlerror so that the host program must fail.
  
  
  Thank you
  Sandeep
  
  Published by: user340 on July 28, 2009 12:51
  
  Published by: user340 on July 28, 2009 12:57

  the plu sql is not come away with a mistake. I mean sql is not treat this case like a sqlerror.

  This is because there is no error. You handled the exception.

  You can try adding a STIMULUS; at the end of your exception section. This re-triggers the exception so sql liked to see it.

• HP 15-f305ddx: I haveva hp 15-f305dx with an error code and the password of the bios 58495227

  I have a haveva hp 15-f305dx with an error code and the password of the bios 58495227

  Thank you so much, you're the best

• KB2449741 not can not install with an error code: 80092004 in ser Win 2008 R2 Enterprise (RTM)

  KB2449741 not can not install with an error code: 80092004 in ser Win 2008 R2 Enterprise (RTM)

  Hello Muneswar M.

  Your question of Windows Vista is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet forum. You can follow the link below to ask your question:

  http://social.technet.Microsoft.com/forums/en-us/categories

• Download works 9 KB2092914 security update and it fails with the error code 646

  Update of security for Works 9, KB2092914, downlaod fails with the error code 646

  See this thread:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/0c397230-26c6-4214-a5d1-3c99d2b2ef47

  Please let us know if that helps.