Muse will not allow a hyperlink in a text frame, unless it's rasterized.  The link does not work. ???

Similar Questions

• Send the link created in Muse will not work

  It's strange. I can send an email to my client in any e-mail program. But if I select the e-mail link to his Web page (created in Muse), even if the email is correct when a window of e-mail, the customer does not receive the emails. Some receive bouncebacks, some don't. I use apple mail and I do not have a bounceback so I was unaware of the problem. The format, I used when creating the email link was mailto:[email protected]. No spaces. It is my first stab at Muse, then perhaps me missing something obvious.

  Hello

  Click on mailto: command opens the default e-mail client that is used on the computer. So Muse creates the link properly as electronic mail process works here but hard bounce/soft bounce/spam etc are not controlled from end of Muse.

  Sending and receiving emails should have appropriate folders configuration, otherwise these problems can arise.

  Thank you

  Sanjit

• My Muse will not work!

  I've updated Muse of complete test and now it won't work. I asks me to activate online even if I'm online and just downloaded it again because I had to delete it and reinstall

  I also have a problem with Acrobat, apparently I'm updating even if it doesn't even exist on my mac

  Is there a real person to call as I am very frustrated?

  Hello

  We managed to get it solved.

  He should be running now.

  My apologies for the inconvenience caused.

  Kind regards

  Sachin

• Hyperlinks in Muse: when placed in InDesign will not work

  I noticed today, using the new Muse 3.0 and placing (linking this Folio overlays) in inDesign CS6 for DPS, the hyperlinks in the Muse fie will not work on iPad... Knwn problem?

  Ooooops, never mind: Re-record and re-release of links solve this problem, works fine now!

• I allowed to CS2, I contact Adobe support for new link and new key for the new facility for the computer updated. In the installation, I have inserted the key from ADobe that I got Adobe support, but when I open programms CS2 it will not work and gives me

  I allowed to CS2, I contact Adobe support for new link and new key for the new facility for the computer updated. In the installation, I have inserted the key from ADobe that I got Adobe support, but when I opened any CS2 program it will not work and gives me the invalid key error. What should do?

  CS2: Error: unavailable activation server | CS2, Acrobat 7, hearing 3 -.

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  https://helpx.Adobe.com/Creative-Suite/KB/CS2-product-downloads.html

• I created my site with Muse and uploaded to an external ftp hosting, now my secure log in will not work because I use no BC. Is there a way to create a secure log which will arrange with forced to use BC?

  I created my site with Muse and uploaded to an external ftp hosting, now my secure log in will not work because I use no BC. Is there a way to create a secure log which will arrange with forced to use BC?

  Hello

  Secure area login feature will not work unless you host your website with BusinessCatalyst.

  Please take a look at this as an alternative

  Password protect Pages Widget for Adobe Muse

  Also, check this thread,

  Re: Can I create a login/password in the Muse for a HTML5 page or two?

• Adobe Muse will not start.

  Adobe Muse will not start. I see a window où additional information are requested account continuing I get another view who says the computer is offline. But it is not true because I surf on the Internet . In addition, the window of of Creative cloud is completely empty I do not have list software installed ou.

  The operating system is Windows 8.

  Hi Venanzio,

  Please try to delete the this place OOBE folder.

  C:\Users\abhijiku\AppData\Local\Adobe

  Please try to launch applications of Office Muse and CC, it should work fine.

  Please let us know if it helps.

  Kind regards

  Abhijit

• Photoshop CS2 will not work with RAW images in the Minolta DimAge A2.  It allows to work properly

  I used Photoshop CS 2 with my DimAge A2 for 5 years in the RAW format.  Now it will not work with RAW with my camera.  I'm using Vista 64.eu all the answers?  Thank you

  It seems to me that you probably had to reinstall Photoshop CS 2.  If this is the case, then, you must download and install Camera Raw 3.7.  The version that was on your installation disc has been updated several times.  And one of these probably included updates support for your camera.  Install RTAs 3.7 and see if that helps.

• LaserJet 1018 will not work on windows 7

  I have a HP Laserjet 1018 which works fine on Windows Vista 64 - bit.  I just built a new PC and put Windows 7 Home Premium 64 - bit on it.  The drivers on the HP support site will not work.  When I try to print something, it is sent to the printer and disappears.  I interrupt printing that document actually get sent to the printer and it appears.  As soon as I have some Nations United-pause the printer, the document disappears, but nothing prints.  Normally, when something is sent to the printer, the "information" LED yellow lights up momentarily and prints the document.  The led does not at all.  I tried new cables, uninstalling and reinstalling etc.  Nothing works.  Just to be sure this isn't a printing problem general, I connected a Laserjet 1020 on the new machine and it works fine.  However, it is my printer to work and I can't leave it on the new computer, which is a personal computer for my home.  It worked to identify that my copy of Windows 7 allows you to print, but is not a long-term solution.  Help?

  Hello

  Thanks for the post.  On this one, I have some ideas.  I pasted the links below.  One is for the driver Win7/64 page and the print diagnostic utility.  I would certainly recommend the utility to narrow down the issue.  The other is a related document in queue which contains excellent information.  Good luck!

  http://support.HP.com/us-en/document/c02239404

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=1814094#n190

• Windows easy transfer will not work. I get the message: "migwiz.exe - point of entry not found. How can I fix it?

  Windows easy transfer will not work.  I get the message: "migwiz.exe - point of entry not found.  How can I fix it?

  Hi PTTimothy

  1. what operating system is installed on the computer?

  2. you are the administrator of the computer?

  I suggest you to check and to provide us with the information about the installed operating system.

  http://Windows.Microsoft.com/en-us/Windows7/help/which-version-of-the-Windows-operating-system-am-i-running

  Step 1:

  You can open the administrator and verify if you can open Windows Easy Transfer correctly.

  You can even check if you face the same question in the user account different or new user account.  You can create a new user account on your computer, and then check.

  Create a new user account-
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  Step 2:

  An analysis of the SFC and audit-
  a. click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click Allow
  b. type the following command and press ENTER:
  sfc/scannow
  A message appears indicating that "the system scan will start. Be patient because the scan can take some time.
  c. If all files require a SFC replace will replace them. You may be asked to insert your Win7 DVD for this process to continue.
  d. If everything is correct you should, after the scan, see the following message "resource protection Windows not found any breach of integrity".
  e. once the scan is finished, close the command prompt window, restart the computer and check.

  Check the link below for further guidance on scan SFC - mentioned
  http://support.Microsoft.com/kb/929833

  I hope this helps.

• None of my restore points will not work. He directed the restoration of the system and that it recharges, but says system has not been restored.

  None of my restore points will not work. He directed the restoration of the system and that it recharges, but says system has not been restored.

  What is your system brand and model?

  What is your Version of XP and the Service Pack?
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  What is the issue that you are experiencing that you think that the system restore will be remedied (or you are just convenient)?  System Restore is not a time machine, but of course, this should work if you think you need.
  Some tools Anti Virus 'protect' your system so that they will not allow a restore of the system work properly.

  For example, if you use Norton/Symantec products, you will see a message like this:
  Restoration incomplete. Your computer cannot be restored...
  It is also a popular Symantec problem (well, I'll be polite and call an "undocumented feature"...), they wrote an article about it:
  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013
  According to what you use for malware protection, you may need to disable the product temporarily, do the system restore and then turn the products light up again when the system restore is complete.
  Sometimes you need start your system in Mode safe and so that your protection programs are not running, and then do the system restore.  Tips from Microsoft in some of their articles that if the system restore does not restore your computer, start in Safe Mode, and then run the system restore.  It works for some configurations.
  System Restore is sometimes so afflicted or Restore Points are suspicious, the best solution is to reinstall your system restore.  This will remove the old Restore Points, but sometimes it's the only way to fix a broken system restore.  You don't have to reinstall XP, only the part of system restore.
  That can leave you with your problem of unspecified origin that you hope the system restore will fix (using a system restore is usually not equivalent to fixing the problem though).
  Give these ideas some consideration if they apply to you.
  Sometimes malicious will afflict your system restore to prevent you to find and remove malware.  It would much rather you trick into thinking that you need to repair or reinstall your XP when it is not necessary.
  No matter what you use for protection against malware, I do so and then only begin to solve any problems:
  Download, install, update and do a full scan with these free malware detection programs can solve any problems:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.

  The scans by operating clean, reboot, test and we can fix any other issues

• I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work.

  I have installed the latest updates for my Compaq desktop computer and the DVD/CD drive bay door will not work. I can get the led light will stop flashing when I open the door all the way, the machine detects the drive but do not read or close on its own, how can I get this disc surgery? Downloading updates, I installed a software disc, when I ejected the disc, the drive comes of is stopped. The computer still sees the drive, but will not read or even close on its own. I also had been using my computer in mode mute until I tried to increase the volume and now the computer tells me no playback device installed. Device Manager acknowledges the Harmon/Kardon soundsticks connected to it, but nothing does, how it works? The Control Panel also sees the soundsticks, but still when I try to move the volume the computer says there is no playback device installed.

  Hello

  1. do you get any error code or error message?

  2. what day you installed recently?

  It seems to be a problem with the hardware. I suggest you try to uninstall and reinstall the CD/DVD driver and check if it helps.

  Follow the steps to uninstall and re-install the drivers.

  a. click on start toreduce this includes this im and then click Control Panel.

  b. click system and Maintenance, click Systemand then click on Device Manager.
  Note If Control Panel is in Classic view, double-click System, and then click Device Manager.

  Reduce this includes this imageIf you are prompted for an administrator password or a confirmation, type the password, or click allow.

  c. in the Manager device, expand CD-ROM/DVD-ROM drives, right click on CD and DVD devices and then click Uninstall.

  d. When you are prompted to confirm that you want to remove the device, click OK.

  e. restart the computer.

  If the methods mentioned above did not help, then it would be best to contact the manufacturer of the computer/CD/DVD player.

  Hope the information is useful.

• After Vista Ultimate Clean install battery Manager will not work Rundll32.exe error at startup

  I did a clean install of Windows XP SP3 Vista Ultimate SP 1. It was a total reload once installation is complete I used the insall system update all the drivers. Now Manager of battery will not work right, when I boot it hangs with an error rundll32.exe. I tried to uninstall and reinstall and allowed me at least open the program a bit, but there is no power management in the Manager. He says that I can create a new, but he does not appear once it is made. I can't counter is displayed in the taskbar and at this point I'm kind of at a loss.

  Any help would be great

  Thank you

  I have actully solved my problem. What I had to do was reboot the machine and after Vista installation was done I did the installation of battery first Manager and just downloaded from the section the T61 drivers (without using the update system) then once the battery Manager installation manual was full (it was then works well) I ran the system update to install the rest of the drivers and utilities Lenovo. If apperentally battery meter do not be installed via updater. My sugestion would be so to reload the machine once more and battery Manager install before running system update this is what worked for me.

• Compatibility Application Applications App the sharper image weather station programs will not work on Windows 7

  Compatibility Application Applications App the sharper image weather station programs will not work on Windows 7

  It is the responsibility of the manufacturer of the device to provide device drivers that allow the device works in an operating system. You will need to contact the manufacturer of the device for info and software.

• Panel of control/restore will not work

  The restoration of the utility program will not work.  He NPT will allow me to create a restore point or restore my computer to an earlier restore point.  Using windows 7 Home premium.

  Currently I have no restore points and I am unable to create an or the pc creates one.

  Hi Thomas,

  See the steps from the following thread and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/actually-solved-system-restore-0x81000203-error/80e0d15a-B9A7-4055-8FAA-6b8799ae7766