Must delete audio video iMovie without Quicktime export

Similar Questions

• Ripple delete, and audio/video tracks

  Hello

  1. when I change I tend to cherboard audio/video, then I will have a video/audio 1 shot and the other on audio/video 2. Now unfortunately when I remove the ripple, the clips will overlap. What I want to do is align with the last clip of any audio track (see photo). I hope it's just a few settings that I need to change.

  2. once a clip in the timeline panel, say on audio/video 1 and I would like to make the video clip 2, is it possible to drag and have audio and video move to their track of 2? Now, I have to move audio and video separately, even if they are related.

  3. is at - it a shortcut to unlock clips (separating audio and video)?

  

  2. in previous versions (Pro2?), the audio part went automatically to the corresponding track.

  Select the clip and drag the video portion to follow both.

  Do not let go of the clip.

  Now, press SHIFT and hold down the key, always with the selected clip.

  Move the mouse over the audio 2 track. (or whatever the way you want it to be on)

  You can do this with several selected clips and contrast from the first selected audio portion.

• After Windows updates Feb 10-11, I "bmmp" noise in my audio which effects my audio/video performance.

  * Original title: System Restore

  Windows 7 Home Premium

  Dell XPS L502X

  Intel Core i7-2670QM CPU @ 2.20 GHz

  8 GB RAM

  After Windows updates Feb 10-11, I "bmmp" noise in my audio which effects my audio/video performance. The video freezes for a split second. I tried system restore several times, but my computer could not be restored to several dates I've tried. If I do not solve the problem today, tomorrow morning I'll try an advanced recovery method. I have a Windows 7-64 bits of the operating system at the same time, graphics cards Intel and Nividea. I had this same problem several times since I got the computer (Dell). Dell has replaced some hardware. Previously, he was my Western Digital external hard drive software that caused the problem. After that I deleted the software from the computer, the problem has been resolved.

  Does anyone have any ideas on how I could get the system restore to work? Or another suggestion that might help solve the problem?

  Thank you

  Joe

  Hello

  This can help you:

  1. If you are using Norton, you should disable Norton inviolable Protection before using the system restore.

  http://Service1.Symantec.com/support/sharedtech.nsf/pfdocs/2005113009323013

  AVG will cause problems with SR too.

  «Temporarily disable AVG»

  http://www.Avg.com/ww-en/FAQ.Num-3857

  2. try to use Safe Mode system restore.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  "Start your computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows/Start-computer-safe-mode#start-computer-safe-mode=Windows-7

  3 Malware will stop at the system restore.

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:

  http://www.Malwarebytes.org/products/malwarebytes_free

  ____________________________________________

  And some information for you about Windows updates:

  Microsoft gives sometimes you updates for the 3rd party hardware: graphics, network cards, etc.

  You should only get the latest drivers for them to real hardware manufacturer's website, as Microsoft normally does nor those have the most recent drivers available as Microsoft relies of the 3rd party hardware Manufactuer to provide.

  But unfortunately, the only way to know which is the update of the problem is to install them one by one, until you find the 'wrong' for your installation.

  You can do a system restore to get back until it has been installed (which is NOT the best way to remove an update) or follow this method:

  'Remove an update - Windows 7'

  http://Windows.Microsoft.com/en-us/Windows/remove-update#1TC=Windows-7

  When you have found the issue of update of the list of updates which is presented > then right click on the update problem > select Hide update > and it will not be available to you once again

  "How to hide or restore the updates of Windows hidden in Windows 7 and Windows 8"

  http://www.SevenForums.com/tutorials/24376-Windows-Update-hide-restore-hidden-updates.html

  _____________________________________________

  Here's how to chanage update settings, if you think it is necessary to:

  "Understanding Windows Update and Extras in Windows Vista and Windows 7.

  http://www.bleepingcomputer.com/tutorials/Windows-Vista-updates-and-extras/

  Or the other of these two update settings will give you the chance to see what you want to install through Windows updates;

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

  But remember you normally only have problems with hardware 3rd party drivers. Other updates are to improve the Performance and security of your system

  See you soon.

• Remove keeping them the audio video and placing pictures in its place

  I am doing a video, I want to keep the audio of it and instead of having just my face while I talk, I want to place the picures and other video clips in silently without lsing conversation. How or can I do with this program?

  I am doing a video, I want to keep the audio of it and instead of having just my face while I talk, I want to place the picures and other video clips in silently without lsing conversation. How or can I do with this program?

  ===============================
  If you download and install Vista Movie Maker 6
  You can easily accomplish your task... it has a more
  usable as Live Movie Maker timeline.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Windows Movie Maker Installer for Windows 7
  http://noeld.com/programs.asp?cat=video#wmminst

  How to insert pictures...

  For the timeline, drag a second copy of the video to Audio / Music
  follow and drag it left or right to align on the Audio track.

  Then right-click / mute the Audio track.

  Now, you can split the video anywhere you want... CTRL + L... and delete
  a section... then insert a Photo and give it the same length as the
  segment you removed.

  Here's another method:

  Split your video clip on each side of the area where will be the stills.

  Now... drag the part cut on the audio / music. BTW... If you want to
  to add a second 5 again... Remove 5 seconds of the video clip. (info below
  splitting if you need it)

  Drag your fixed shots to the timeline and drop it off at the place where
  you have deleted the video.

  The Audio clip on the audio / music can be dragged to the right or left to
  adjust its position.

  More information about the Division...

  "Split a Clip in MM2.1.

  Drag the audio clip on the timeline.

  Play the video/audio by clicking on the 'Play' button under the display screen.

  You will see the playback indicator (vertical line), advancing through the
  timeline.

  Click on the "Pause" button at the location where you want to cut and type...
  CTRL + L or click the "Split" button at the bottom of the display screen.
  (you can also make adjustments by dragging the playback indicator)

  Make splits as much as you want and remove unwanted in law clips
  Click on / delete.

• Problems with audio/video streaming with USB devices on zero clients

  Hello:
  We are using view 6.1.1 in our environment and problems getting audio/video streaming to work well with the USB headsets, with zero customers.  Helmets are Jabra Link 360 and customers zero Samsung NC241.  Helmets are used as well for the phones to Jabber and also as audio device by default.   We started with the audio driver Teradici and everything seemed to work well, except that users could not answer calls on the headset itself with the button on the headset.  They were able to answer the calls of Windows though and the part worked fine.  In order to get the physical button to work, we had to first fill the USB receiver they use on the zero clients so that Windows will see as the device Jabra 360 and not the audio device Teradici.  Then we had the EHCI USB mode on them as well, and after that he started to work very well.  However, the helmets also serve as the audio device main as well as the communication (phone) device, with audio streaming continuously throughout the day.  With the current configuration, audio streaming will cut in and out during the day, and audio/video is not always to stay in either phase.

  I also applied the registry in this KB hack, VMware KB: improvement in audio quality when you use speakers or USB headsets with a desktop VMware view Horizon 5.2 , which helped clear up Crackle that we originally with the part phone headsets.  But there is still the issue of streaming audio.

  I wonder if the effectiveness of the bridging USB is not as effective and also is there a way to make this work better?  I read that the use of the pilot Teradici is supposed to help with audio/video problems, but do not know how that can be applied to USB devices as we use.  I've been reading upward on Teradici audio/video settings, but do not know where to go from there.  I was hoping that there are some best practices to use USB headsets with a view, but so far I'm not finding anything useful.

  For any help or suggestion would be greatly appreciated.  Thanks in advance.

  We were finally getting help by the people of Cisco after validation in the here and even open a support ticket with VMware, which was open for more than a month without will.  Where others try to implement similar, here are our findings:

  • Zero clients combine traffic USB and PCoIP.  It is not good when there is a lot of audio/video/USB traffic, especially the USB headsets that also carry audio softphone.  In our case, the USB traffic was so dense that it was causing audio and video become troubled and freeze and eventually cause the pcoip_server service to break in the virtual machine itself and cause the client disconnect.  The fix?  Don't use customers zero with USB phones software, they are not just designed for this type of solution.
  • Thin clients are much better designed for USB softphones.  In our case, we used the Cisco VXME client, which is the method of support for the use of Windows thin clients with the client of the Horizon.  There is integration between the two products that isolates the VOIP traffic out of the virtual machine and keeps it local on the client itself.  Regular audio and video traffic still go through the virtual machine using Teradici or VMware RTAV driver.

  Hope this helps others who may run this question.  One thing we did not try was a wired headset using the AV sockets on the zero client and Teradici audio driver.  This can work, but our needs here were the headphones must be bluetooth, so we were forced to stick with USB.

• Audio/video will not synchronize even after Audio

  Hey guys,.

  My audio and video won't sync properly, even after I try to align the audio video.  After a few seconds, the audio is back.  It's almost like the A / V play at different rates.

  I got this video a recently recorded livestream that my job done.  They sent me a link to download the mp4.  He played fine in Quicktime format.  So I opened an empty project from the first, drag the video, the audio is disabled.  Then I pass the audio to sync and it matches later upward to the bottom of the timeline.  I tried to make A / V, playing with frame rates, and I'm not having any luck.  For some reason any in FCP, I can match and synchronize the audio and video very well.  But when I try to export it, FCP can't finish the job.  The video is about an hour long.  The they gave me the files are corrupt?  They want this to me as soon as POSSIBLE, and I don't know what to tell them.

  Thank you!

  Jeremy

  Convert video using Wondershare cleared up my problems.  My problem is solved.

  Thank you Jim and Kevin.

• Skype Audio / video call disconnect after 14 seconds in mac

  Skype Audio / video call disconnect after 14 seconds in mac

  1. call interrupted after 13-14 seconds

  2. cannot hear the caller's voice but may receive on my side

  3. I have reinstall the Skype delete old does not work

  4. even I have remove the whole mac and reinstall is the same question

  5 normal voices of Skype can hear I can do auduio / video on the face time

  so its means something wrong after that I tried everything I decided to inform Skype because I didn't even have no solution or anyone else have problem with that

  Finally I found the solution that my firewall was turned off, I just turn on and work and then I turn off again and its working fine but this solution that I found after post

• Audio & video controls on Satellite A50

  Hi all

  Anyone got any ideas how to get the audio/video controls to work on my satellite A50?

  They do not seem to work with any of my media players i.e. wmp10, nero, power dvd...

  Anyone got an idea as to this driver, I need to make them work.

  P.S.: They worked, but after that I formatted the disc they stopped so obviously im missing pilot.

  Also I don't have the recovery disks. Is this downloadable from anywhere?

  Thank you

  Hello

  You must download the tools for the buttons on the Toshiba site. With this tool, you can activate the buttons.

  Just look at this site:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Search for your machine, please select your operating system and download the appropriate tools (should be "touching a launch" or "orders")
  I hope I could help

  Welcome them

• Problem with deletion and Redownloading iTunes and Quicktime. Error: unavailable network resources

  Original title: trouble with deletion and Redownloading iTunes and Quicktime

  I am trying to remove iTunes in my computer through my control panel, but its telling me that it cannot remove, because of unavailable network resources.  I accidentally deleted quicktime then this all started.  Before iTunes was working.  When I try to re-download the ITunes it says that you must delete old version first.  Please help me someone with a great idea?

  Hello

  Step 1: Check if you are able to uninstall iTunes in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  1. click on start and then click Run.

  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.

  4. When prompted, click on restart to restart the computer.

  Step 2: Pass through 'Verify iTunes and related components are completely uninstalled' in the article below: http://support.apple.com/kb/HT1923

  Then try to reinstall iTunes .

• "For Audio/video on the Internet" does not open

  Hi all

  As the title suggests when I click on "for Audio/video on the Internet" nothing happens.  It seems that the icon has also changed.  I tried to look around this problem without success.  I would appreciate any assistance.

  Plaase excuse my ignorance, but it is "for Audio/video on the Internet", a program or command in a browser (maybe an add-on)?  What is doing?  Have you checked that the http://www.microsoft.com/windows/compatibility/windows-vista/Default.aspx Vista Compatibility Center to ensure that the program / module is compatible with Vista and/or Internet Explorer? If so, please provide the web site of the program (link) so we can search more far - I couldn't find using Bing (which is unusual).  The fact that it has an icon indicates it is a program.

  What was the program installed and when its last function properly (and have the correct icon)?  Do you know when this problem started?  Try a system restore to a point in time BEFORE the problem started.  Here is the procedure: http://www.howtogeek.com/howto/windows-vista/using-windows-vista-system-restore/.  Don't forget to check the box to show more than 5 days of restore points.  If the first attempt fails, then try an earlier point or two.  NOTE: You will need to re - install any software and updates that you have installed between now and the restore point, but you can use Windows Update for updates.

  Right-click on the icon and click Properties.  On the general tab, it's a file with a path - what is this parth?  Go to this path in Windows Explorer and check to see if it exists and if it contains all of the files/programs. If it is there, so we know at least that the program is on the system even if the icon does not work.  Go to the executable main real within the program and create a new shortcut icon and move whenever the icon currently exists and see if this new icon works and it solved the problem.  If this is not the case, try to do a right-click on the icon and click on run as administrator to see if you have a better chance.

  If she isn't here or the procedures above will not work (and it is a program or an add-on), then I suggest you uninstall with Revo http://www.snapfiles.com/reviews/revo-uninstaller/revouninstaller.html and then restart and try reinstalling it.  He may have developed some corrupted files (espcially if the icon has changed) and this may clear up the problem.

  If I'm away from base here, please tell me.  I've never heard of this product before and as I said, I don't find it with Bing, and it is very rare that the programs available.  Please explain what it is and more to hold and, if possible, provide the link of web site (I can download it me to test it and see if I have also the problem - if I have Vista Business, which does not come with Media Center and I suspect that it is associated with, if it's a program).

  I hope this helps and please get back to us with more information so that we can help you better.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Audio-video time real (RTAV) 4.6 view

  Hello

  I'm experimenting with running Lync 2010 according to VDI (XP / Win7). For this I need a way to connect devices to the end-user (webcam, microphone and headphones) for desktop view. Since it is a green field situation I have the choice of getting audio / video that is suitable for this purpose (USB, analog, Bluetooth wireless, or any combination of that). End users have a combination of Windows with View client installed boxes, the boxes of Windows RE-configured as thin clients (kinda the same) and of course zero clients (Wyse P20) to complicate things. All the these must be able to transfer audio / video of the end-user in Lync 2010, if all goes well with correct performance.

  What caught my interest the other day is RTAV - I fell on it all by looking for ways to make the above and immediately confused with requirements. See here:

  http://blogs.VMware.com/EUC/2013/07/3370.html

  They say I need client-side user view Horizon (easy, downloaded later and he connects very well to our 4.6 view servers), State but I need "Horizon view 5.2 (or later version) view Agent" inside the guest VM:

  
  

  More on your guest virtual machine, you need an Agent horizon view 5.2 (or higher) to view, along with the Horizon of VMware View 5.2 Feature Pack 2

  
  

  How are we going to find 5.2 agent view invited inside VM on a 4.6 view server install? Can it be done at all? I was able to install 5.3 view Agent in one of the test of Windows 7 discovered desktop computers, but after he successfully installed the console administrator 4.6 display shows it as "Agent unreachable". I rebooted time invited VM and Horizon of VMware View Agent service, no change.

  We use ESXi 4.1 build 1050704, discover 4.6 366101 with the composer, are a few pools and an upgrade to 5.x view would require a lot of things to upgrade. If we cannot get RTAV work with 4.6 view going to abandon this until we can improve our entire infrastructure.

  Thank you

  
  

  
  

  Hello

  If you run a server connection see 5.2 environment ie 5.2. If it comes to greenfield, suggest then you pick up the latest version 5.3, and it needs to connect to the Server 5.3. It will then detect the 5.2 (or agents of 5.3). On the agents, you install the feature pack. You will not be able to install a broker in an environment of 4.6 5.2 4.6 connection server don't "understand" agents of 5.2. For support - for a 5.2 RTAV environment, you must install the Feature Pack 2 and an environment 5.3 to the FP1.

  Notes; If it is a greenfield site - is it possible to use Lync2013? If Yes, then view has integration with Lync 2013, which means that you can enjoy all the benefits of Lync (i.e. audio and video goes direct to the recipient, rather than having to pass through the virtual machine in the data center) which reduces hair pinning effect.

  See Microsoft Lync support for 2013 with VMware View desktops | Blog from VMware Computing end-user - Articles VMware

  and

  http://www.VMware.com/files/PDF/Techpaper/VMware-horizon-view-Microsoft-Lync-install-configure.PDF

  see you soon

  peterB

• Just installed cs5.5, audio & video effects are missing...

  Just installed cs5.5, audio & video effects are missing... What to do?

  Thank you all

  Need not do anything. One of the major improvements in CS5.5, although perhaps not as well known to the public, is that the audio effects are now 'intelligent' and are unified in their mono, stereo and 5.1 counterparts. Which means that if you need, say, Reverb for a stereo clip, you just drop the effect of reverberation on it without having to find the stereo > reverb effect. They have the same effects, just much easier to apply. Check out blog post of Todd here: unified audio effects in Adobe Premiere Pro CS5.5 "Premiere Pro workspace .

  This said, you have problems with video effects?

• Audio can increase/decrease after export

  Hello

  I had put an audioo behind a clip video and reduced the volume of the audio.

  But after export, audio continues to increase n decreases. As, when, in the sound of the video (Audio1) stops for 2-3 seconds, the other audio (Audio2) volume increases, and when the sound of the video (Audio1) increases, the other audio volume (Audio2) decreases.

  Can someone help me?

  Thank you

  It sounds like your playback software is applying some kind of standardization.

• deleting audio delete background

  Has anyone else experienced this problem?
  
  If I select an audio file in use of the library and delete it, deletes the background of this slide, too.
  
  I use C3 on a 64-bit XP system.
  
  All solutions?

  AHA! I found a solution. Delete audio in the slides, and then remove the audio in the library.

  To quickly remove several audio files of slides:
  Audio > Audio advanced > select a file > Ctrl-A [select all] or Ctrl-click to select several files > click X to delete.

  Clean the library:
  Right-click anywhere in the library > select unused items > tap on delete.

  I also found that if I want to delete an audio file from the library without deleting its background image, I.
  Select the audio above or below the one file I want to delete, make right click the audio file to delete > click on delete.

  It might also help to put a chicken rubber at the top of your head and recite the Star Spangled Banner in esperanto.

  Thanks, Rick, for your quick reply. He of course made me think '.

  -Leslie

• How do I change the speed of audio/video

  Hello
  I'm trying to change the speed of audio/video playback, so I could play faster, but I did not find any solution.
  It must be changed dynamicaly - there is no possibility of normal production, quick read of file.
  
  Thank you
  
  ----
  LN

  Quote:
  Posted by: spoofan
  Can Flex convert flv to swf somehow dynamically?

  N °