Ripple delete, and audio/video tracks

Similar Questions

• Audio setting on the music and the video track separately?

  Hey everybody. I am a new user of first old clip and I didn't open the app on my phone for a while. I really appreciate all the new and improved features. One thing I had a lot of trouble to determine is if I could change the volume of a music track discreetly of the audio in the video track itself? Maybe I'm missing something obvious, but I played a bit with the audio settings and found them a bit confused.

  Thanks a lot for your time!

  -quin

  Hello Quin,

  Welcome to Clip you can both edit your soundtrack and audio video independently.

  To adjust the volume for your soundtrack, press the icon of music on the top of your screen. Once in the menu of the soundtrack, move the Volume slider to the desired level.

  To adjust the volume of a video clip, select the item in the sequence, press the speaker on the bottom of your screen icon. From there you can mute or increase or decrease the volume using the volume slider.

  I hope this helps!

  Best,

  Peter Garaway

• How can I reproduce a sequence by keeping all the clips as elements, rather than see it embedded with an audio track and a video track solo?

  I did a movie, happy with her. But I want to make a shorter version also. In the first how can duplicate my keep all items, instead of ending up with a sequence of nested main sequence?

  Exactly.

  Open the existing calendar, CTRL-A, CTRL-C, go to the new timeline, CTRL-V.

• 20 Bloggie and audio/video not synchronized

  I just this 2 weeks ago and I want to make sure I know what I have in front of the store-back window expires... During playback of my videos, it's like a bad dubbing - move the mouth, and then a few seconds later his fate. Why is this? Something be avoided, or is it a defect?

  Thank you

  Ricky

  Hello Ricky,.
  Apologies, you're having a problem to sync audio with your bloggie MHS-TS20, make sure you have updated the firmware to solve.

  http://eSupport.Sony.com/us/Perl/SWU-do... dl = MHSTS20

• State multi and audio/video buttons

  1. I'm working on an interactive pdf. Right now I have a whole audio to play automatically when the page is loaded. I need the ability to be able to do this multistate button. In that appearance when the page turns is a pause button that pauses the audio (I put this right now and it works very well), but then I need to move to a ' play' button to perform the action to resume the audio when clicked.
  2. Also, I put a button to load the video, its a mp4 file. Is there a way I can set an action to the button that takes completely off the screen as well as audio? Currently, I am able to define an animation above, so that when you click or you spend on it, it will disappear, but the sound that's in the video does not disappear.
  3. I have problems also with buttons that should link to open a pdf file. We're working very well. All others are not? Small hand cursor does not appear even when I hover over them to show that they are the link, but when I check in the file they are.

  Need help for period of tomorrow! Help!

  Thank you

  Here is a workaround I posted a few years ago for a button with two functions which may help you:

  http://InDesignSecrets.com/creating-a-two-function-button-for-interactive-PDF-or-SWF.php

  I don't think that your second request is possible.

  Definition of buttons to open other files is extremely delicate and difficult to implement because the hierarchy of files should be maintained. It works best if all the files may still be in the same folder.

• How to fix formwork previews and audio-video/not synchronized?

  I have finally all my clips online and it seems when I play back two things happen:

  1. the video is super slow and I could go from one screen to the other QUICK see below, sound almost to the end of the clip the first image has changed!

  

  

  2. the voice-video seems very closed.  As I speak clearly, but the video is not followed.  I have a feeling that it is because of the formwork and using a ton of effects to turn and what not, but anyway to get around this?

  JUST as an info in this part, I was talking to a powder and clear the frame is behind by talking to me at all as I laid eyes LOL

  

  Hi Thaeyeballqueen,

  I have finally all my clips online and it seems when I play back two things happen:

  1. the video is super slow and I could go from one screen to the other QUICK see below, sound almost to the end of the clip the first image has changed

  2. the voice-video seems very closed.  As I speak clearly, but the video is not followed.  I have a feeling that it is because of the formwork and using a ton of effects to turn and what not, but anyway to get around this?

  

  See where it says, "Full"? Change this to 1/4 or more, and your reading will be smoother. In this case it is due to your footage. She is too demanding for the computer you are using.

  Change this to 1/4 your problems of two, or just one?

  If you are still having your second question, I have to find which video camera you used to shoot your video. Or did you use a webcam or a mobile phone to film the video? The answer to this question may hold the answer to your second question should you be that persist.

  Thank you

  Kevin

• Ripple delete and move markers too?

  I am looking for a way to remove the ripple this gap so as to move with her chapter markers. Is it possible to define the editing until the beginning clips and the timeline from scratch? Seems there used to be a way to do this, but I can't.

  Menu marker > ripple sequence markers

• Problems with audio/video streaming with USB devices on zero clients

  Hello:
  We are using view 6.1.1 in our environment and problems getting audio/video streaming to work well with the USB headsets, with zero customers.  Helmets are Jabra Link 360 and customers zero Samsung NC241.  Helmets are used as well for the phones to Jabber and also as audio device by default.   We started with the audio driver Teradici and everything seemed to work well, except that users could not answer calls on the headset itself with the button on the headset.  They were able to answer the calls of Windows though and the part worked fine.  In order to get the physical button to work, we had to first fill the USB receiver they use on the zero clients so that Windows will see as the device Jabra 360 and not the audio device Teradici.  Then we had the EHCI USB mode on them as well, and after that he started to work very well.  However, the helmets also serve as the audio device main as well as the communication (phone) device, with audio streaming continuously throughout the day.  With the current configuration, audio streaming will cut in and out during the day, and audio/video is not always to stay in either phase.

  I also applied the registry in this KB hack, VMware KB: improvement in audio quality when you use speakers or USB headsets with a desktop VMware view Horizon 5.2 , which helped clear up Crackle that we originally with the part phone headsets.  But there is still the issue of streaming audio.

  I wonder if the effectiveness of the bridging USB is not as effective and also is there a way to make this work better?  I read that the use of the pilot Teradici is supposed to help with audio/video problems, but do not know how that can be applied to USB devices as we use.  I've been reading upward on Teradici audio/video settings, but do not know where to go from there.  I was hoping that there are some best practices to use USB headsets with a view, but so far I'm not finding anything useful.

  For any help or suggestion would be greatly appreciated.  Thanks in advance.

  We were finally getting help by the people of Cisco after validation in the here and even open a support ticket with VMware, which was open for more than a month without will.  Where others try to implement similar, here are our findings:

  • Zero clients combine traffic USB and PCoIP.  It is not good when there is a lot of audio/video/USB traffic, especially the USB headsets that also carry audio softphone.  In our case, the USB traffic was so dense that it was causing audio and video become troubled and freeze and eventually cause the pcoip_server service to break in the virtual machine itself and cause the client disconnect.  The fix?  Don't use customers zero with USB phones software, they are not just designed for this type of solution.
  • Thin clients are much better designed for USB softphones.  In our case, we used the Cisco VXME client, which is the method of support for the use of Windows thin clients with the client of the Horizon.  There is integration between the two products that isolates the VOIP traffic out of the virtual machine and keeps it local on the client itself.  Regular audio and video traffic still go through the virtual machine using Teradici or VMware RTAV driver.

  Hope this helps others who may run this question.  One thing we did not try was a wired headset using the AV sockets on the zero client and Teradici audio driver.  This can work, but our needs here were the headphones must be bluetooth, so we were forced to stick with USB.

• I deleted from the temporary folder and now my microphone and camera do not work, the audio and the video hangs when activated

  C:\Users\John\AppData\Local\Temp and emptied, had like 20 GB of misc * in there, when I deleted it no error came, nothing has been locked. then when I didn't try to use my webcam (creative Webcam live pro v280) the audio and the video freezes as if taken in too much data to be processed during recording, and when I try to speak, it comes out as a big sound introduction text that's noise and videos recorded is accelerated as a 10 x. I bought a new webcam installed and everything went well, and exactly the same thing happened. (microsoft livecam this time) no sound. Anyone have any ideas?

  Hi Johnny,.

  Perform the System Restore to an earlier date and check if it helps.

  System restore

  System Restore can return programs and system files from your PC to a time when everything was working well. This will not affect your documents, images or other data.

  Hope this information helps.

• Timeline between video and audio tracks splitter

  The separator between the video and audio tracks on the timeline is very difficult to see. Although it is thicker that other lines of demarcation is not yet clear enough for many people. Y at - it anyway to change the color of the "divider". Does anyone know of a plugin or a workaround may achieve this result? Ideally, we should be able to change the thickness and color so that the timeline between the video and the audio division are visible immediately by glancing at the screen. Can anyone help?

  Unfortunately, no thickness and color cannot be changed, and I've never seen a plugin to enable this. Sounds like a feature request for me!

  Feature request/Bug Report Form

• By aligning multiple video and Audio tracks

  I am a multi-instrumentalist and worked on videos of my songs.  I save in Adobe Audition CC.  I've usually will start to record the audio/video with my Nikon D3200 as well as with studio microphones that record in Adobe Audition.  I add then several tracks on this track main video/audio recording to play the electric bass, banjo, mandolin, and percussion etc.  I mix all the tracks and send video clips to make a video in Premiere Pro.  I found that the main (usually guitar track) syncs perfectly with the video camera that I put in the calendar when you use the synchronization in the first feature.  From what I've read, if it is only possible to do this with a video and audio track.  I need to find a way to be able to align the other video sequences with the main audio.  Does anyone have a workflow that make this process easier for me?  Is there a way to do what I'm maybe missing out on Premiere Pro?   Please help me if I can continue the creative process!

  This is an example of what I'm doing https://www.instagram.com/p/-snqVSwzft

  I had to align that laboriously trying to watch the movement of the hand, but there must be an easier way.

  Audio and video synchronization begins to shoot and carries through to the edit and mix.

  Create sync audio and video synch and they will line up in the chronology of the edition.

  A simple way for you to do is a snap of the hand or a tap pronounced on the handle.

  Pro is use timecode in photo and audio recording device.

  Click on the titles and click count-ins are useful for musicians when more dubbing and overlay track.

  Its nice also.

• How export a project consisting of 2 video tracks with many clips/effects and 1 stereo audio track so that the project can be worked into another compatible editing system?

  How do I export a project composed of 2 video tracks with many clips/effects more 1 stereo audio followed that project ACR is still worked in a

  
  

  compatible mounting system? Thank you!!

  When you export, you create a new video file that will have effects applied... in other words, a book finished

  Of course, this video 'complete' may be edited by someone else on another computer... but it SEEMS to me that what you want is for someone to take your editing, continue editing, THEN export a finished video

  Is this correct?

  If so, do some reading in the help file on the Manager project, so you can put your project and all files on an external drive to give to any other person

• Video and audio tracks do not go down together EVEN when linked selection is checked!

  I'm sure it's something really simple, but I just can't understand. And there's a button or option I checked because it didn't use to do a few days ago.

  Basically, I have a clip on the timeline that has a video and an audio track. I want to move the clip until the next video track, but I want the audio down to the next audio track too. Currently, it does not. Only the video file goes to the next track and the audio clip remains in the same way. How can I fix that while however many tracks I'm moving the video audio goes down by the same number of titles?

  

  Hello Ivan,.

  IvanTheEditor wrote:

  I want to move the clip until the next video track, but I want the audio down to the next audio track too. Currently, it does not.

  These are two separate movements in Premiere Pro. Don't forget that most of the people usually need not pass audio when moving video to other tracks.

  Thank you
  Kevin

• connecting the video and audio tracks

  I have a mac computer and the first cc pro.  as a person of FCP go to the Prime Minister, I always try to get the right combination of shortcut keys.  Somehow my audio tracks are liked llinked to the video tracks.  I have to cut and move them separately.  Must have pushed the wrong button somewhere, I don't know how to create a link to them.  Can you give me the path long and short?

  On the top left of the scene Panel is an icon that toggles that "link/unlink" function.

• Video and audio tracks will remain not related

  When I select the files I want to stay connected, (audio video) and right click to link to the top, it works. But then when I click on the video or audio file separately they are not related. This happened all of a sudden all my projects so it much be a setting in the program but I don't know what. Any advice would be appreciated! Thank you.

  Click the icon to the right of the magnet, the title sequence of the timecode.