Must select and change all the type is defined in a specific font

Similar Questions

• Movie Maker grab and changed all the desktop icons for Movie Maker and all isopening Movie Maker

  I have a big problem, I have Windows 7 and I made a film using still photos on my computer now all binding, Movie Maker says that Movie Maker does not support the selected file type, 3 first films went great, but obviously I hit the wrong key, it changed all the icons on my desktop to display the icon of Movie Maker and each icon now opens on seizures to the top of Movie Maker, I tried every troubleshooting and restoration utility, but nothing changes; When I go to Movie Maker hand opens as if she's trying to do something. Can you give me any advice, would be much appreciated I can't do a thing right now.

  VI

  Have you tried to do a system restore
  Safe mode for one hour before the beginning of the question?

  Using Windows 7 or Vista System Restore
  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

• Search for and change all the bug after his conversion to Authorware 7

  A few months ago, we went from Authorware 6.5 to Authorware 7

  I have problems with a 6.5 converted to Authorware 7.0 file. I tried to convert the file again after the first compact 6.5 file. I tried it again after the Authorware 7.02 update, but still the same problem.

  The bug affects "search".

  If I get " : " and replace everything by ": " 

  i.e. get cites two spaces OR and replace by quote single space OR

  There is no problem of search and replace in 6.5, but version 7 search text 16 characters to the right of the correct text, it is not change because it would produce a syntax error.

  Using 'Find in calculation' correctly identifies the first occurrence of

  quote two spaces OR

  Another example, if I get a variable named Mode, the first, several items are correctly identified, but ultimately it incorrectly highlights text.

  I tried in both XP & Vista, with similar results. Obviously, editing is a nightmare, because of global change, I now by clicking next several times, check that the correct text has been detected before the election change the code.

  I copied and pasted the calculation containing cites two spaces OR, a spreadsheet Excel and got the Ascii code all 9000 characters. The lowest recorded value is 32, half, I expect a non-display less than 32 character could be the cause of the error.

  Could find no mention of this error on the forum, I contacted Adobe. They kept me 15 days pending then lift the query at a higher level. For two months, they have ignored every week queries asking what was going on.

  This was their response, if any.

  Monday, November 30, 2009 1:34:07 AM PST
  Hello Tom,
  
  Thank you for providing your information.
  
  We wish to inform you that there is something on the text in the
  calculation, as saved from Authorware 6.5, which is not Authorware 7
  as. The only way I found to stop this is to cut and rebonding of
  calculation script in Authorware 7. You may need to check that
  the find command is highlighted before you apply the changes, and when he sees a
  problem like that, you have to copy / paste for this calculation. We
  were afraid of us can't see another way to stop this, and like Authorware's
  is not developed, there is no engineering team we can point to.
  
  For additional assistance, please contact us at the Support Web Portal:
  www.Adobe.com/support or you can use the following on support options
  the Adobe Web site:
  
  * The user-to-User Forums where you can enter your problem or
  desire to see if another user of Adobe can offer advice. Access to this
  resource address www.adobeforums.com.
  
  * The Support Knowledgebase, which contains solutions to problems
  that occur on the assumption of the operating systems (<>) and products of <>).
  
  Thank you Adobe chossing.
  
  Abhishek

  I have never been a fan of Adobe, even before they took from Macromedia and abandoned Authorware. Their terrible support strengthens my opinion of them

  I asked Adobe if it is possible to convert in 6.5 (but no answer).

  Any suggestions?

  Looks like you have found the solution that could make the search and replace works for good. "Diving code", I mentioned at the top of the queue showme is a calc that is attached to the card. Open one of the showme files and double-click the = at the top left of the map at the top of the page. You can only paste a calc icon in your file. I'm not sure that your solution works for every situation... for instance if you replace the SPACE BACK by RETURN, then he could not correct the problem, if there are lines with several spaces at the end... Here again - maybe using GetCalc and SetCalc will be Authorware re - compile the Calc and fix the problems of every search and replace.

  Mike

• Hi, after I had import image in Lightroom CC, I select develop and change all the colors in the picture to really bad. All the colors are messy. Look, there's no wantted is selected. I have just started using this software. Fr. Tero

  

  Disable "Use graphics processor" in the Menu > edit > Preferences > Performance.

• Network discovery does not 'on' when selected and recorded, all the answers?

  I have some very annoying problems with my new network set up.

  My network consists of a Belkin router type "n" (model F5D8236-4v2), the main PC with windows 7 32-bit OS, a wireless laptop XP, a machine of the PS3 and TV (model KDL 32EX403 =) Sony Bravia - hard wired to the router.

  I want movies stream from my PC to the TV. laptop and PS3.

  My PC (the principal server) see the laptop, TV, but not the PS3. He can see the files on the laptop and the laptop you will see the PC it cannot access any files or folders on the PC.

  The TV can not see the PC, laptop or PS3.so no films can be heard of these components on television.

  I tried everything that Microsoft and several forums have to offer, but to no avail.

  One thing I noticed when trying to find a configuration to mitigate the problem, it's that when you go to "Advanced sharing settings" and try to change the setting of 'Network discovery' on IT, and then save this setting, it is up to the STOP after trying to save.

  Please can someone help I'm quickly running out of hair to pull.

  Thank you

  Hello

  We will first try to turn on network discovery in Windows 7 for you to do:

  Go to: Control Panel---> Administrative---> Services-(search for SSDP DISCOVERY)---> right click Tools 'SSDP DISCOVERY'---> go to---> Set auto properties

  STEP 2: Control Panel---> administration tools---> Services-(search for the HOST of the UPNP DEVICE)---> right click 'HOST de UPNP DEVICE'---> go to---> Set auto properties

  You should be able to turn on network discovery

  Restart all of your devices, including your router.

  Let us know the progress

• To work with the text to the assignment by the cursor of the large fragment of page it is necessary to change all the time down, 'against the judgment", but the page automatically does not start to rise upward, as happens in other browsers. I ask you for

  After the transition to Windows 7, there was a problem with Firefox. To work with the text to the award by the cursor of the large fragment of page it is necessary to change all the time down, 'against the judgment", but the page automatically does not ascend to the top as it was earlier, and like that occurs in other browsers. It is necessary to press the other key "down" which is him very troublesome. Resettlement on an earlier version (8.0) earlier irreproachably working, gave nothing. I ask you to help

  You must activate the module bar (Firefox > Options or view > toolbars;) CTRL + /) or find bar to make Firefox scroll the page while selecting the text (Ctrl + F).

• All my programs have gone there program default open in Word 2007 how to change all the programs back to defuault there?

  All my programs are passed to the default opening program here as Word 2007 How do I change all the acknowledgement of programs to defuault there? I uninstalled the steps and it made no difference so I reinstalled and opened. Then he did the same as before. How can I get my programs back to default here?
  This problem started as soon as I updated my Windows 7 - 32 bit - please help. :(

  Hello mattyboy1212,

  Thanks for posting on the Microsoft answers Forum.

  Try these steps and see if you can associate the default programs. If they are associated with Word, and then change them to the correct program.

  1. click Start and then click Control Panel.

  2. click on programs link.

  Note: If you see small icons or large icons in the control panel display, you will not see this link. Click on the default programs icon, and then click the link associated with a file type or Protocol with a program . Go to step 4.

  3. click on the link to Open a file in a specific program type always under default programs .

  4. in the set Associations window, scroll down until you see the file extension that you want to change the default for program.

  5. click on the extension of the file to select it, once you have found what you are looking for.

  6. click the button of change... program above the scroll bar.

  The Open with dialog box should appear.

  7. look into options for programs recommended and choose the application you want to open it with the file extension when you double-click on the particular type of the file on your computer.

  Note: Chances are, requests described under the programs recommended will be contain more programs for this type of file, but don't forget to look at the applications under other programs. You may need to click the v to expand the list of these programs.

  Note: Click Browse... to search, through your computer for any program not shown do not want to use.

  8. click OK in the Open with window. Windows 7 is going to update the list of file associations to display the new default program to open this type of file.

  9. click the button close the bottom together associations . You can also close the window of the Control Panel if it is still open.

  10. at this stage, when you double-click on any file with this particular file extension, the program you partner in step 7 will launch and load the particular file.

  Important: Program used to automatically open when these types of files have been launched will again open these types of files. To use a different program, you just need to start the program manually and then browse your computer for the file in particular.

  If please reply back and let us know if know if it helped to solve your problem or if you still need help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Windows Explorer does not work properly and hold all the time

  I have Windows 7 Professional as a platform. In the end, I find windows Explorer does not correctly and hold all the time. Pls advise on how to solve this problem. Note I am not a computer Savvy and I need a step by step approach.

  Thank you for your time and enjoy your time.

  .

  Hello

  Use the startup clean and other methods to try to determine the cause of and/or
  eliminate problems.

  ---------------------------------------------------------------

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Include
  everything you've ALWAYS had on this machine, including those you have uninstalled (they
  remains of leave behind which can cause strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows
  Vista or Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything-
  then right click on taskbar - task manager - take a look at stored by -
  Process - Services - this is a quick reference (if you have a little box on)
  Lower left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Is a quick check to see who are loading method 2 - using MSCONFIG
  then after a list of these here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns also shows you the complete list
  locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor file system, registry, process, thread and DLL
  activity in real time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are
  loaded automatically when Windows starts. For each application, what follows
  the information is displayed: Type of startup (registry/Startup folder), Command - Line
  Channel file, the product name, Version, company name, location in the registry or
  file system and more. It allows you to easily disable or remove unwanted programs
  that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe
  not. The window Watcher says it all, every window created by each execution of the statement
  program, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded
  on your system. For each driver in the list, additional useful information is
  Poster: load address of the driver, description, version, product name,.
  company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit Maker as replacements and system manufacturer of device which are
  the most recent. Control Panel - write - graphics card - device manager
  the brand and complete model of your video card - double click - tab of the driver-
  Note the version information. Now click on UPdate Driver (this can do nothing
  MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
  If there are 3rd party with their own software and drivers and the other main device drivers
  you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
  and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
  their latest versions. (Look for the system to update the BIOS, Chipset and software updates
  Site of the manufacturer here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
  REBOOT after each installation.

  Always check in the Device Manager - drivers tab to be sure the version you are
  installation actually appears. This is because that some rollback of drivers before the
  later is installed (particularly that audio drivers) so install a driver - reboot.
  Make sure that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
  SCANNER - check manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using
  the above methods is preferable to ensure the latest drivers from the manufacturer of system
  and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable driver facilities
  in the updates of Windows, which leaves on Windows updates, but it will not be installed
  pilots who are generally older and cause problems. If updates provides a new
  driver then hide it (right click on it) and then go get new ones manually if
  you want.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for the)
  Professional, comprehensive and Enterprise edition)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ===========================================

  Refer to these discussions because many more excellent advice however remember to check
  your antivirus, the main drivers and BIOS update programs and also to solve problems
  with the first method cleanboot.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Changing all the semantic VARCHAR2 length in BYTE to CHAR columns

  Hello

  our database is to use character set AL32UTF8, i.e. multibyte.

  All our VARCHAR2 columns have been specified as VARCHAR (xxx) semantic unspecified length explicit, which makes VARCHAR(xxx BYTE) because NLS_LENGTH_SEMANTICS is set on 'BYTE' (default Oracle).

  I wonder now if it would cause problems to enter and execute the ALTER TABLE statement to change all the columns of VARCHAR2(xxx BYTE) to VARCHAR2(xxx CHAR), leaving the same xxx. For example, if a VARCHAR2 column (100 BYTE) would be amended to be VARCHAR2(100 CHAR).

  If I am not entirely mistaken, - on the contrary - it would make the columns longer, not shorter; I expect to not get errors on the values of existing records being too long to change the specifications of the column in this way (as it may happen when the shortening of a VARCHAR column, for example, of varchar (10) to varchar (5)). So I think the ALTER TABLE statements should go without problem.

  I would also change NLS_LENGTH_SEMANTICS to TANK.

  Are there problems or consequences I might meet when I do this? I'm not worried about the implications for code enforcement external or such, but simply the integrity / performance / etc on the database level.

  It is a 11.2.0.x of Oracle database.

  Thank you

  MSA

  You can make this change to your drawings, but not for Oracle schemas or third party. It would usually not be supported.

  You will not get the errors associated with the data in the table. However, you can encounter errors due to:

  1 index of issues of key length - the maximum length of an index key in bytes (based on the column definitions, no real content column) is limited to about 70% of the size of the block of the tablespace containing the index. If you try to do a column belonging to a larger index key by applying the semantics of length in characters, you get an error if the change causes the index key limit.

  2. some columns cannot be changed. This includes, but may not be limited to, the columns that are referenced by expressions of virtual column and the functional index expressions, columns that have indexes defined on them, and columns field belonging to a partitioning key.

  3. you can not change the columns that store attributes of the type defined by the user in this way. You must change the definition of type instead.

  Also, do not change NLS_LENGTH_SEMANTICS initialization file. Include the keyword CHAR in your scripts or ALTER SESSION SET NLS_LENGTH_SEMANTICS = CHAR in these scripts. Value of the initialization file will affect all the scripts for Oracle products and third-party and can create tables with the semantics of unexpected length. Therefore, for compatibility reasons, this parameter in init.ora/spfile parameters is not recommended.

  Thank you

  Sergiusz

  Post edited by: Sergiusz Wolicki (Oracle)

• Change all the entries in list of another field

  If I'm working on a new form and I need to move my data. The attached PDF is windjacks tut which works very well, but I can't figure out how to work with what Im doing. I have tried to reconstruct all of this javascript and other tutorials and did not have much luck.

  All effect the next from the left drop down. New data in Row3.PartSelect fills so by looking at the bottom line I put in Row.AssemblySelect. When Row3PartSelect data are selected on the new data will fill Row3PackageSelect. I tried to do this work with a new SetPackageEntries(); order modeled off the coast of the SetPartEntries(); with some varable changes but I couldn't make it work. Then, finally, after performing a selection in the Row3PackageSelect data must be distrubred to 6 or more different cells that you can see under the Row3.Price.

  https://DL.dropboxusercontent.com/u/2944617/00%20work/ListPrograming_Part1_AcroForm%202.PD f

  Hope I explained it clearly. Aid Appericate!

  -Zach

  http://answers.acrobatusers.com/using-event-changeEx-q40824.aspx

  This link has me more or less to where I wanted to go with mutli drop downs and completing all the required fields.

• My Media Player is not let him come his pass. I tired FixIt and followed all the links there and I still can't get media player to read.

  My Media Player is not let him come his pass. I tired FixIt and followed all the links there and I still can't get media player to read suggestions?
  original title: Windows Audio recording

  Hello

  (1) what version of the Windows operating system is installed on your computer?

  (2) did you of recent changes to the computer before the show?

  (3) what is the file format of the files you are trying to play?

  (4) you get an error message?

  (5) you are able to hear the sound of Windows and other applications?

  (6) that Microsoft Fixit ran?

  You can try the following methods and check if it helps.

   

  Method 1: No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

   

  Method 2: Problems running Windows Media Player

  Open the troubleshooting Windows Media Player settings Troubleshooter by clicking the Start button, then Control Panel. In the search box, type Troubleshooting, and then click Troubleshooting. Click view all, and then click the Windows Media Player settings.

  See this link:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter

  Method 3: Solving problems run Windows Media Player library

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter

• opening program minimizes and optimizes all the time

  progam start showing some problem of its own.

  progam was started for the first time after starting the computer indicates a sound problem, windows Explorer minimizes and optimizes all the time until he is arrested. Pls suggest a solution for this type of problem.

   
  1 did you do changes on the computer before the show?
  2. you receive an error message?
  3. what version of operating system you are using on the computer?
  
  Method 1:
  You can run a Microsoft security scanner to make sure that the computer is free from virus infection:
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  WARNING:
  If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also if the files and folders are affected by the virus, while they might even get deleted
  
  Method 2:
  You can also perform a clean boot and check:
  Windows XP: How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Windows 7 and vista:
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete do not forget to reset the computer to a normal startup. Follow step 7 in the above article.
   
  Method 3:
  You can also try to run a SFC scan, it will scan and try to correct some of the system files.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

• How to extract the same song, several times using different bit rates or formats and store all the digital music files in WMP 12 default on the same HDD music library

  Using Windows Media Player 12 (w/under Windows 7), "can I ripping the same song, several times, using different bitrates & and/or formats and store all the digital music files in the music library by default WMP - 12, on the same hard drive?

  1.) #1 goal: tear up the same song repeatedly, w / "different rates" as a WMA file.

  2.) #2 goal: tear up the same song repeatedly, w / "different rates" as an mp3 file.

  3.) #3 objective: NOT to each subsequent copy (version) of the song, deleted & and/or replaced by the previous version of the song [even].

  4.) question Bottom Line Up Front--> is Windows Media Player 12 (included with the Windows 7 operating system) are able to achieve '#1 objectives; #2; & #3 above?

  5.) details/example: I want to tear the piece "Maria Maria by Carlos Santana" to my laptop as a Windows Media Audio [WMA] file.  In addition, I would like to rip the song 'Maria Maria' three several times with 3 different bitrates in format WMA; and, as an MP3 file.  Therefore, my final result wished (after the extraction process), will take place the four 4 audio files split up as follows: (a) 'Maria Maria by Carlos Santana'--> Format: file WMA; Ripped @128 Kbps bitrate.  (b) ' Maria Maria by Carlos Santana'--> Format: file WMA; Ripped to the "Variable bit rate; (c) ' Maria Maria by Carlos Santana'--> Format: file WMA; Ripped commissioning "Lossless." and (d). 'Maria Maria by Carlos Santana'--> Format: MP3 file. Ripped @256 Kbps bitrate.

  6.) my preference: I do NOT want to rename the file (s). {for example, 'Maria Maria by Carlos Santana' renamed/changed for--> "Maria_Maria_by_Carlos_Santana_128kbps.wma",...} 'Maria_Maria_by_Carlos_Santana_256kbps.mp3 '; etc.}.  In addition, I am not concerned about the additional disk space that will be consumed after multiple copies of the same song with different speeds of transmission and different formats.

  7.) my experience w / Windows Media Player 10 (w / the operating system of Windows XP): using WMP - 10, my goal (s) described above is not a problem at all.  Simply insert the CD purchased by Carlos Santana, containing the song "Maria Maria"... Select the desired Format (WMA; WMA VBR; WMA Lossless; or mp3)... Select the desired flow rate (WMA... 128/160/192kbps_mp3: 128/192/256/320 kbit / s; etc.) ; and click on the "RIP" button to start the copy process on the hard disk of of Carlos Santana's "Maria Maria".  This process (w / WMP-10) would result in having the same song, copied on the hard disk, with levels of quality different "audio" (via the different bit rate settings); regardless of the format (MP3/WMA) which was chosen.

  8.) my experience w / Windows Media Player 11 (w / the operating system of Windows XP): using WMP 11, to described above of my objective (s) could not be reached e-a-s-i-l-y.  The problem with WMP - 11 - in short - which was after the desired selection "Rip settings" tab 'Options' of WMP - 11 (i.e., Format & Bit Rate) and heart-wrenching piece wanted to {'Maria Maria by Carlos Santana'} a moment later/second, WMP11 remove / would crush the previous version of the song [even].  Therefore, the program would NOT allow the user to have multiple copies of the same song on the hard drive of the PC; which obviously restricts a user to have the freedom to choose what level of quality digital audio, they prefer to listen to.

  9.) the ability to have multiple copies [at my descretion] of the same song (on my hard drive) with different bitrates and formats in my music library, is important for me because it has a direct impact on "how I enjoy MY music ', and in what form (audio quality), I choose to listen to my music.  {For example, when I exercise and listening to my camera, digital audio player (Zune), a song ('Maria Maria by Carlos Santana'), will usually be torn off at a lower rate due to the unit of capacity reduction of storage - compared to the storage capacity of notebook PCs/desktop/external hard drives PC.}  However, when I listen to my music through my home cinema or entertainment system (which contains a hard disk dedicated with a large storage capacity), I prefer to load the entertainment system with digital music files that have been ripped to WMA... with the bit being rate-setting is for the: settings "WMA Variable Bit Rate" or "WMA Lossless.

  10.) there you have it.  This is my first post in this forum.  I hope that [detailed] explanations, will be sufficient to encourage these "with knowledge & the hands on experience" using Windows Media Player 12 (as well as with WMP-10/WMP-11 respectively), by providing a [step] "How-to"... "solution to my situation.  It would be highly appreciated.  I'm looking forward-'the solution' - and relevant suggestions & and/or community feedback regarding my request for assistance.

  * Thank 'All' (that would) in advance... For your time & Assistance *.

  Certainly, you can, but I would say that they be in different folders, for your convenience as well as Windows.  You can create one for each debit/format, then you will know who is who.

  In Windows Media Player, on the toolbar, select Tools, Options, Rip, and then select the flow you want first, rip music, then change the folder (higher on the same tab) and rip again... and so on and so forth.

  When you are at home on your home theater, you can use the 320 bitrate folder, when you transfer to the Zune, you can use one of the lower bitrate files (although I personally tear it up to 320 and let the Zune reduce as he wants, even with the iPhone via iTunes, hard drive space is not really a problem here) my server has several hard drives, and I can always add more if and when space is low!

• How to stop Nitro file converter to change all the files Adobe

  Recently, I wanted to convert a word document to PDF format and downloaded a free version of the Nitro program, but as the only free part of the downloaded program had to watch as she then asked me to purchase the full program before I can use it so I deleted it from my computer. But before he completed the uninstall is it changed all the Adobe files and documents that I had on my computer as it now changes the file type of any Adobe file or document sent to me as an attachment.  How can I stop it? Drag the manufacturer before the courts sort them? If anyone has any ideas on how to prevent or change what happened to be sent to the email address [email protected]

  Hi 117elk,

  I'm sorry to hear that you are having problems with your Adobe files. But I think it will be an easy fix. You should be able to re - associate files with their correct application names. I'm tons of course what operating system, you are on, but here are the instructions for many:

  Change the programs that Windows uses by default - Windows help

  How to change the default application for a file type. Macworld

  Please let us know how it goes.

  Best,

  Sara

• How to change all the colors specific to another color.

  Can someone tell me how to change all the colors in Illustrator by another color at a time.

  I've worked in Freehand, and you can select all, go in a Panel and make the change

  all from one color to another in a layout.

  Exp. You can change pms 356 to pms 410 without selecting each one individually.

  I can't find this feature in Illustrator CS4

  Any help appreciated

  HJMann42

  Left is simple to do, said Kurt.

  Go to the Swatch Panel, select pms 401 that cmd select pms 356 go to the menu drop down and select Merge shades.