mute button volume and area of scrolling on the Pavilion dv7-3039ez does not
Hello
the volume button mute on my laptop dv7-3039ez does not, fortunately, it is on and not on mute. Someone had a similar problem?
Thanks a lot on how to unlock this button.
Hello
Shut down the PC, remove the AC adapter and then remove the battery. Now, hold the power button down for a good 30 seconds. Replace the battery, connect the power adapter and start the PC.
Best wishes
DP - K
Tags: Notebooks
Similar Questions
-
I was upgrading my HP DV7-3162nr for windows 10 when all of a sudden the laptop stopped working and would not turn.
The power adapter is plugged in and battery led was flashing. Now battery led does not at all depend on. When I press the Start button the laptop would try to start then turn off after about one second. However most of the time when when I press the button nothing happens.
I took out the battery and tried to immediately start the alternating current, but the laptop is like there is no power. The led near the power connector is on the AC adapter is plugged in. I checked the tension between the adapter and it is correct to about 19 volts, I even loaded to 1.5 Amps and voltage remained close to 19 volts. I tried now on the button for more than one minute with applied power (no battery or AC) and no change when I tried to start with just AC. The battery is old, but shouldn't the laptop run on just the AC adapter with the battery installed? I do not think that windows 10 has done this, but it's a weird coincidense that he died during the upgrade.
I read about simular problems with flags of HP but nothing exactly like it. The fact that I can not turn on the laptop with just the adapter seems to be a problem really bad.
Anyone has any ideas I can try to let me know
I was able to fix my laptop.
I thought that it must be a hardware problem, because the laptop would not run just the adapter. And the adapter was good, as I said, he had the right voltage and can support the load. So after looking at a lot of U tube videos on how to disassemble laptops and looking for schematics on the laptop which I couldn't find. I disassembled the laptop and a beep on the load circuit and it showing. What I found, it was a bad MosFet at the beginning of the charging circuit. The MosFet P/N P0603BDG has shorted door to the Source. I was able to get the part of China via Ebay for less than $5.00 total and it took a week to arrive.
Now, the laptop charging the new battery and works very well. I could have found the bad MosFet faster if I had diagrams. Does anyone know if it is possible to get the schematics for this HP laptop? I found a manual and it helped a bit to disassemble the laptop, but he had nothing on the main map.
This problem is now solved hope it helps someone out there.
-
Div scrolling in the observer of Android does not
I have a HTML file containing a div with height: 100px and overflow: auto.
I can scroll the div when I open this HTML file in the browser (for example, chromium) on my Android device.
However, when I import the HTML file in an article published in my folio (or as an overlay of web in the article) the viewer Android prevents me from scrolling. She catwalked for iOS.
I tried the two DPS v29 and v31 on a Nexus 7 (2012) and Samsung Gallexy tab 2.10 and I tried to add iscroll.jsI wonder if it is possible to enable scrolling in the observer of Android.
My HTML file:<! doctype html >
< html >
< head >
< meta charset = "UTF-8" >
< title > Untitled Document < /title >
< / head >
< body >
< div style = "border: 2px solid;" padding: 4px; Width: 200px; height: 100px; overflow: auto; ' > '.
1 < br / >2 < br / >3 < br / >4 < br / >5 < br / >6 < br / >7 < br / >8 < br / >9 < br / >10 < br / >
< / div >
< / body >
< / html >
Hello
Please try with the content viewer 31.1 we published today. 31.1 view web content changes to improve the handling of the gesture. Let me know if you still see issues.
Thank you
Dave
-
I got an error saying that Licensing has stopped working. We downloaded a small .exe (LicenseRecover) file, but it didn't work.
We started again to the computer and we had another error, saying that he had to uninstall and reinstall. But if we uninstall, we uninstall without disabling, so this isn't an option.
This is the error we get when CS3 starting now: you may not use this product at this time. You must repair the problem by uninstalling and then reinstalling this product or contact your COMPUTER administrator or Adobe customer support for assistance.
So I tried to support the customer online. Seems that there are no online support more for CS3!
How can I make it work again? I really need the software for my work.
If you only installed and active software once before, you still have an extra activation to your disposal. So if this is the case you can uninstall and reinstall and reactivate using your serial number.
You can also get Adobe support by chat to reset your activations - they are likely not available until after the end of the week. Do not ask for more than that but or they will tell you that they do not support for older software installation problems.
To the link below, click on the still need help? the option in the blue box below and choose the option to chat...
Serial number and activation support (non - CC) chat
http://helpx.Adobe.com/x-productkb/global/Service1.html ( http://adobe.ly/1aYjbSC ) -
Escape does not work.
Did you try F11?
Double Post.
-
Problem wireless, mute volume and area button button scroll volume
The product name and number: HP pavilion dv6-2137sl
Product number: WE047EA
Operating system: Windows7, 64-bit
All of a sudden my Wireless button, the mute button volume and the area scroll volume does not work...
Please help me solve the problem.
concerning
Ben Ahmed (Bangladesh)
Try a hard reset, works sometimes. Disconnect all external devices first.
battery and power cord 1 / removal
2 - Press the power button for 30 seconds
3 reinstall only the power cord for the first start.
4. turn on -
Laptop quick launch mute my computer Pavilion dv6-1050us button does not work properly. He puts the speakers muted, but does not change color. It's still orange, not mater if your speakers are on or off. His other (white) State works because it is white to start windows, but then goes to orange and does not change when selected but by selecting the button speaker turn the speakers on and outside as it should.
I've loaded and reinstalled the quick launch driver software (sp46731.exe), but the problem is still there. The problem is about 2 weeks old. Have not added any new software that I know. But computer installs updates as received.
SimonHello
First download the audio driver by using the links below and save the installer to your desktop.
Once the download is complete, right-click on the Setup program and select "Run as Administrator" to launch the installation - ignore the warnings that you can see everything that is an earlier version. Once the installation is complete, restart the laptop.
Kind regards
DP - K
-
I'm getting "unmountable boot volume" and I don't have the recovery disc or a hard drive on my netbook.
I tried to connect my netbook to a sony bravia tv and I pressed the power button to restart because it was so slow awakening of the mode standbyI am running windows xp home sp3. What should I do?Hi samp2000,
Follow the steps in this article to resolve the problem:
-
Blue contours appeared and I can't control my iphone 5 s. I can't go to settings. I triple click on the button "home" and gives a message to go into settings and enter the password but I can't get to the settings. What does not work? Thank you
The blue plan is switch control.
s http://gettecla.com/blogs/News/15538916-what-is-switch-control-mode-in-apples-IO
Triple click to get rid of him.
"Siri to the rescue. I said turn off the control switch. »
Re: How to disable the switch control
I don't get a request for an access code. What is a school system?
switch control
Settings > general > accessibility > switching control
R
-
I use an analog input on a PCI-6224 and are having problems with the clock source
I use an analog input on a PCI-6224 and are having problems with the clock source. I'm trying samples of 16 different analog inputs very quickly. I have the sample mode: Timed Single Point material. The rate, that I am running is the maximum (250 kHz (15625Hz per channel)). I left the default clock source and trying to taste several times. The analogue input works for a short time (2-3 seconds) and then everything stops. I'm doing something wrong or is there something I'm missing? Any advice would be great.
That's how you samples using the sample clock clock. If you see a delay then something is wrong with how you track/data visualization.
Single point NI the hardware is for PID control with a real-time operating system.
-
Original title: Reader for printer HP LaserJet 4200 for Windows 7 gives problem
My hp laserjet 4200n printer is connected to a print server of XP through the parallel port, when I share this printer from a 64-bit Windows 7 computer and you are trying to install the driver, it says driver not found. * INI file I already Miss down site fromhp driver loaded but invain.
Please suggest
Hi Mohammed Arif a. R,.
You can try to plug the printer again and check the updates of Windows and see if the drivers are install.
Install Windows updates in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/install-Windows-updates
You can also view the following HP Web site and try redownloading drivers and check.
Also check out the following link and try the suggested steps.
Network printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems
Note: This article also applies to Windows 7.
Hope this information is useful.
-
Hello!
The Creative cloud program does not. When you open the file in Photoshop says that there are not many fonts, use Typekit. Typekit itself turned off. All programs downloaded and saved, but Photoshop doesn't see Typekit. What should do?
Also says that I have no access to this service. For access, please contact your COMPUTER administrator or connect using the ID
Hello
Greetings!
Is Typekit on?
Visit this link: Add to your desktop of Typekit fonts
Concerning
Jitendra
-
I just bought Leica, should be free, Lightroom,
I try to download there problem to to do.
can anyone help.
Dear customer Leica,
We are delighted that you are interested in one of our high quality products and are hereby send you the redemption code for the download of the software directly from Adobe.Please enter this code at the following Web site to download your version of Lightroom:
Your redemption code: xxxx.xxxx.xxxx.xxx.xxx
https://redeem.licenses.Adobe.com/getserial
We hope you enjoy our product.
Leica Camera AGPlease check How to download, install and activate Adobe applications
-
My paragraph styles have disappeared and are now appearing as the character styles
Working on a new site because my old site muse become buggy...
and now, my paragraph styles have disappeared and are now appearing as the character styles
Thank you for sending the files. One of the files does not contain any character or paragraph Styles. In the other, I see the character styles named as paragraph styles. All indications from within the file are that they were created as character styles. The file format includes indications of the type of the style as well on everything that they are applied and in the list displayed in the palette. All of these styles are indicated by styles of characters in both places. The attributes that are in the styles are limited to what is allowed in a character style.
In some places where the styles are applied, they are applied to the blocks of text or widget and replacements parts for paragraph-level attributes (i.e. h1 tag, space before and after, etc.). This leads me to suspect that they have can be created from blocks of text pointer tool selections (or other elements of text in widgets) and it was perhaps accidental that they have created using character Styles where paragraph Styles Panel rather than the Panel?
-
I was not able to open my my Adobe Illustrator application after update. He says there are a few problems with the preference but after following the instructions, Illustrator still does not work and it keeps giving the samei question. Help, please.
I think you are talking after upgrade to CC 2015 you're not able to launch I. Also, I believe you speak for read only matter of preference.
After following the instructions please do not launch Illustrator and check your file preference if the permissions have been set correctly. A good way would be to get inside the preferences folder and then try to create a file manually. If it succeeds, please write to [email protected]
A few external links to help you set permissions:
MAC
OS X Yosemite: set permissions for items on your Mac
WIN
Set, view, change, or remove permissions on files and folders
Kind regards
Ashutosh
Maybe you are looking for
-
Problem with a mythical eMac (USB 2.0)
Hi all I retrieve an old eMac (USB 2.0) and I changed the HARD drive with a 100% compatible ULTRA ATA/100 with even specific 40 GB Original. In fact, the system is without BONES, and I tried to install the latest compatible version (Mac OSX 10.5) in
-
Satellite A200: Need a free software to turn videos I use the chicony webcam
Hello! I wanted to ask if there is any chance of finding a free program with which I could shoot some videos, movies etc with my Chicony 2.0 camera integrated on my Satellite.I will be really grateful if you can help! Thanks in advance! Kind regardsP
-
Huge fragmented tmp - OK to delete file?
I did a defrag on my drive, but there is always a C:\windows\temp\hd104D.tmp file that cannot be defragmented with 7994 fragments and 121 GB. Not sure that this file is. I have a HP Officejet printer. Is it safe to delete this file tmp?
-
I've got B550A without 3 G modem. I called technical support according to this feature. They said that Lenovo provides a cellphone with 3G modem (except netbook) in Russia. I can buy the modem 3G Lenovo GOBI 2000 but technical support could not answe
-
How can I make a program does not need an admin password
Hello My son has a game that needs a pass admin for a reason, and I don't want to enter my pass whenever he wants to play. is it possible to do this 1 program don't have do not need for me to put in my pass with him making an admin