MView delta deploy problem between SDDM schema and db (Swap models target dictionary import) - overview of the DDL generation

Similar Questions

• My Webcam has problems detected by Skype and repeat myself there is another program that uses the webcam. Skype device code 43 usb video.

  My Webcam has problems detected by Skype and repeat myself there is another program that uses the webcam.

  Also got the guests when using Skype as a video device usb was not detected and that it is a code 43.

  Have tried several way sto resolve this problem. CyberLink YouCam HP's running came preloaded on the laptop. The webcam is running when this program is being used separately.

  Inappropriate Feedback Forum of Windows hardware and drivers Forum.

  My Webcam has problems detected by Skype and repeat myself there is another program that uses the webcam.

  Also got the guests when using Skype as a video device usb was not detected and that it is a code 43.

  Have tried several way sto resolve this problem. CyberLink YouCam HP's running came preloaded on the laptop. The webcam is running when this program is being used separately.

  Inappropriate Feedback Forum of Windows hardware and drivers Forum.

  Hello, Aadi467,

  A device driver has notified the operating system that the device failed.

  Run the diagnostic tool of hardware devices do not work or are not detected in Windows on the Microsoft Fix it Center.

  You can also uninstall the software from Cyberlink.  There is a found here download link to reinstall the software after restarting the computer.

  http://h30434.www3.HP.com/T5/notebook-operating-systems-and/lost-my-CyberLink-and-UCAM/TD-p/760367

• Is there a list of graphics cards that work perfectly with all the new features of Creative Cloud? I want to update my graphics system and want a model that will be obsolete when the next CC updates the roll autour.

  Is there a list of graphics cards that work perfectly with all the new features of Creative Cloud? I want to update my graphics system and want a model that will be obsolete when the next CC updates the roll autour.

  The "General" cloud requirements are quite low... so you have to ask in the forums of specific program for a special features used by individual programs

  For video editing Premiere Pro, go read it in community: Forum Hardware | Adobe Community

• Port-channel problem between fabric Interconnect and vPC N7K

  Hi all

  I have a problem with the Port Uplink channel between fabric interconnect with N7K using vPC

  It's my network for the UCS deployment topology

  

  N7K I configured vPC for red link and green linkto the fabric Interconnect A I has configured the Port-Channel with Member is Port 1 and Port 2, uplink is red link. Interconnection fabric B, I have configured the Port-Channel with Member's Port 1 and Port 2, uplink's green link.

  The interface port-channel on N7K show is good, each port-channel upwards and have all members. But the fabric Interconnnect, when I see in the UCS Manager, the status of the Port-Channel on Fabic A and fabric B dysfunction not more info: no operational Member. Although all the link is a link to the top and I've got the status of the Port Channel is enabled in the UCS Manager. When I see the properties Port 1, Port to Port-Channel 2, I see the number of members status is: individual. This means channel port is not up and no member in this configuration. I want to using the port-channel load balance and more bandwidth for the uplink of 20Gig. I don't understand why?

  Please help me solve this problem, I have to send the screenshot of UCS Manager when I show the status of the Port-Channel and Port-member in port-channel to reach items.

  Can someone help me solve this problem, thanks a lot. References, please include elements for more details on the fault.

  Thank you

  Trung.

  Hello Nguyen,

  Since the two N7k please collect:

  SH cdp nei

  SH run membership in. X int

  SH sum port-chan

  Thank you

  Matthew

• conection problem between labtracer2.0 and Keithley 2400 meter Source

  Hello

  I have a problem of the connection between labtracer2.0 (published by Keithley,) compiled on Labview and Keithley 2400 meter Source.

  My basic connection is Source Meter2400, card GPIB (from Keithley) and Labtracer2.0.

  Although I have installed the run time Visa 4.4, and labtracer2.0, I can't use labtracer control 2400 and get the data from it. The warning information indicate that the labtracer cannot find the run-time information, or there is a script error if I run the test several times.

  In fact, this system is ok last week. The higher present problem after I install Matlab and KTEI for Model4200 of Keithley. Although I uninstall them, the problem still exists.

  I tried to uninstall and install all relevant sofe. But the problem still bothers me.

  I need your help.

  Thank you very much.

  Hello

  I do not know what is causing this problem, but there are some measures we can take to restore your system before installing the new software. This problem is probably caused by registry keys over written by the new software.

  First of all, you need to uninstall all software of NOR. Then, follow the instructions in the word document that I joined the. It will use the MSIblast utility to clean all your registry keys.

  We then, navigate to your System32 folder and delete cvirte.dll and cvirt.dll of your system files. Now, when reinstall us NI-VISA 4.4, the software will reinstall the correct versions of these files.

  This process, you should get back to where you were before the offending software.

  Thank you

• Problem between a mac and PC

  So for the first time, I was tasked to work on a project that was started on a mac and I must now continue to edit video on a PC. Source media files on both systems, so I thought it would be a simple task to open the pproj with first on my PC and then simply tell first where he could find the source of the videos. Unfortunately its not too easy. I tried to open the pproj on my PC and it gave me an error "this project contained a sequence that could not be opened." I can't for the life of understand me about what the question could consider all the base files are the same and the sequence itself was fixed to use P2 1080i - 1080 p 60 Hz DVCPROHD and codec DVCPRO HD 1080i 60 Hz and my PC has the same codec.

  Is that what I can do to save the project on the mac in a 'PC-Friendly' format?

  I also opened one of my previous project file in a text editor and the mac project for comparing the XML information and PC we have only about 2700 lines of code and the mac version has more than 4500 even if its short duration and less is happening in it.

  Is it possible that it open is as simple as editing a header or a file format tag somewhere in the code, and re-registration?

  Thank you!

  Ever seen a thread similar Kevin solves nothing.

  I actually found the question. We used a custom preset to the sequence that is not exactly the same on both systems. When I used one of the default options instead it corrected the incompatibility. So the solution must either use a standard preset or to make sure that you copy the predefined as well or if this is not possible, re-create the custom preset with exactly the same file name and parameters SHOULD theoretically work (have not tested yet).

  Thanks for all the suggestions so guys!

• No mapping between account names and security IDS made mistake by attempting to use the Task Scheduler

  I have noticed that my msfeedssync.exe were not working or updated so I went to the Task Scheduler to see what was going on and received the number above mapping between user names and security ID error I never use Task Scheduler, but I do not know its also used for RSS updates , I do all my own maintaince so I need only of GI RSS using a 3-year-old dimensions of dell with xp pro and its in tip top except for that shape it came only with a 80 GB hard drive and I've only used 20 concerts in 3 years that I use online for things important and backup storage I hope there is a solution for this because I installed ram to 4 GB and it has a 2.8 ghz Processor blazin fast and is in very good shape all help will be appreciated thanks

  Hello syncere99,

  1. What is the user account in the Task Scheduler are you for the work you are trying to use the Task Scheduler?

  The error code indicates that the user account that was used to create the job no longer exists. This could be because the user account is deleted. I suggest that you remove and re-create a job and check if you have the same problem.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Problem scanner PORTABLE Asus and Cannon lide110 Please HELP NEED FOR WORK IN THE MORNING Thank YOU

  I have an asus laptop and I have to scan ID and things of that nature for work. I use the canon lide110 scanner to scan and when I do it scans while he presents himself as one of the predefined p [ictures that are on the computer when buy you them...] How do I see what I scanned to import it into my photo file?

  Hi Amanda,.

  You have installed the drivers for your Canon lide110 scanner?

  I suggest to follow the steps below and we update on the State of the question.

  Method 1: Run the corner hardware store and check.

  http://Windows.Microsoft.com/en-in/Windows7/open-the-hardware-and-devices-Troubleshooter

  If you have not installed the Scanner driver, go to method 2.

  Method 2: We will install the driver application and scanner Canon Scanner.
  

  See the following links:

  Version of driver Scanner LiDE 110 17.0.4

  http://www.Canon-Europe.com/support/Consumer_Products/products/scanners/LiDE_series/CanoScan_LiDE_110.aspx?DLtcmuri=TCM:13 - 831503 & page = 1 & type = download

  Solution Menu EX version 1.4.0

  http://www.Canon-Europe.com/support/Consumer_Products/products/scanners/LiDE_series/CanoScan_LiDE_110.aspx?DLtcmuri=TCM:13 - 831523 & page = 1 & type = download

  If you have additional questions, or if this problem persists, come in and we will be happy to help you.

• Problem opening of Swiffy and Toolbox for JS in EM CS6 due to the Flash error

  I'm trying to convert flash .swf in html5 using Swiffy and box tool for CreateJS. I downloaded Adobe Extension Manager CS6 and try to open the Google Swiffy extension in the EM, but it says I need Flash 10 or newer. I checked on the Adobe Flash site and also my knowledge I Adobe Flash 18. The same problem occurs when I try to open the Toolbox for CreateJS - it says I need more 12 Flash.

  Is there something else I need to download or a reason it does not work? Any help would be appreciated.

  Best,

  Anthony

  Maybe you need CC Manager extensions if you use Flash CC or higher?

• Synchronization problem between iCloud, iPhone and iPad.

  Good, if I want to sync my iPhone and iPad to iCloud, but I don't want that there is no synchronization BETWEEN devices. In other words, I don't want the notes and photos from my iPhone find you on my iPad and vice versa. How to make that happen?

  The iPhone and the iPad should be connected to different Apple IDs to iCloud. If you turn on iCloud for both and they are saved in the same Apple ID and you select this option for sync or download content, they should be the same, or you will crush either. Separate IDs is the only answer.

• Problem between field, MUSE, and Typekit

  Expensive Type Kit supports,

  I have an urgent matter:

  I created these sites in adobe MUSE:

  http://Motos.Honda.es/africatwinepictour/ (you must User/pass for access)

  http://www.africatwinepictour.es

  http://Motos.Honda.es/africatwinepictourpt/index.html (I open theseones so you can see that doing/where is the problem)
  

  http://www.africatwinepictour.PT

  Sites in Spanish are works well, but http://www.africatwinepictour.pt and I Don t know where is the problem.

  This site http://Motos.Honda.es/africatwinepictourpt/index.html is exactly the same site as this one http://www.africatwinepictour.pt , but still work doesn´t .pt

  Where would be the problem? The problem is that the customer checks it and need for today...

  Sorry, I know the answer... the area has been redirected incorrectly.

  Concerning

• Compatibility problem between RH 9 and HR 10

  Person to another branch of our company received a copy of RH 10 to update an existing WebHelp project that was done originally in RH 9. For various reasons, we need to revise this draft (now in HR 10) by another person in the company who only has 9 HR. However, we get an incomaptiblity error when we try to reopen it in RH 9 (see figure below).

  I was under the impression that you could go "back and forth" between the two versions. Is there a work around for this? We want to keep the development in the RH 9 environment and cannot afford to move at this time.

  

  Hello

  Surely you can downgrade to RH9 as long as you do not use specific features of RoboHelp 10. (You can even go down to RH8.)

  See http://www.wvanweelden.eu/articles/downgrade-robohelp-project for an overview for a how to.

  Take a bow

  Willam

• Connectivity problem between Windows 7 and Windows 2008 Server R2

  I'm unable to ping Server Windows 2008 R2 on windows 7. some time get the replay, but some time is expired. I can ping the XP system and windows 2003 and router and switch. knowledge on all new patches or something is blocking the connection.

  I turned off firewall and Antivirus in both systems, off IPV6 in the two systems, but it's no go.

  Hello

  That your computer is under domain, you must contact the TechNet forum, where we have of the support technicians who are well equipped with the knowledge on the issues of domain, do visit the link provided below.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• bending problem between a file and an anchor point

  With Dreamweaver CS6, I'm tying a File1 to an anchor in a File2 (the two files are in the root folder). Browsers do not open the page with the anchor.

  If the anchor is on the same page, it works.

  
  Thanks in advance for your help

  Place it in file1

  Anchor in File2

  and have an anchor in File2 like

  or similar

• Problem desktop icons, blue and referring to an application used to be on the SD card, but is no longer there

  Hello
  I have this problem, my app box shows me two icons in blue, as the system icon, you know. These icons are the symbol of SD above. I click on them, and the message is that the app is not instaled. I made a return to the top and I formatted the SD card and made a SDMaid clean, to clear all the tracks off old apps but the icons still there and I don't know which app they belong
  Do you know a solution for this?
  Thank you

  I found the solution! This!

  If you still see these apps under settings-> Apps, try to uninstall them from there and see if that helps.

  If you do not, go to settings-> Apps-> all-> House Xperia-> clear data-> OK and then reboot the phone. But be aware that this will reset your homescreen to the default settings.

  

  See wrote:

  If you still see these apps under settings-> Apps, try to uninstall them from there and see if that helps.

  If you do not, go to settings-> Apps-> all-> House Xperia-> clear data-> OK and then reboot the phone. But be aware that this will reset your homescreen to the default settings.

  I think that this red text has been copied from one of my answers to help anyone with a similar problem on this forum