Problem between a mac and PC

Similar Questions

• Why my notes sync between my Mac and iPhone?

  I have my MacBook Pro with Mac OS X 10.9.5 Mavericks and my iPhone is running iOS 10.0.1 and used to synchronize my notes! Is it because of the huge gap in operating systems? I SHOULD update my Mac to Mac OS 10.10 + for this problem? Thank you!

  In order to synchronize Notes between your Mac and iPhone, you must configure iCloud > http://www.apple.com/icloud/setup/

  But this requires macOS Sierra 10.12, the latest available version and the last iOS available for your iPhone.

• How can I sync my email between my mac and my iPad

  I'm a Road Runner e-mail account and use Outlook on Mac.  I also have an iPad 2 Air which I just bought.  Is it possible to sync my email between my mac and my iPad?  I wish I could use my Mac or my iPad to check my email and store messages in my files.  I currently can't do this on my Mac, I don't know how to synchronize between both devices.  Did I ask for possible?

  If the e-mail account can be configured as IMAP, you can add the account for both devices and they will keep in sync.

• I can work between my Mac and iPad, but can not get my iphone to receive transfers?

  I can work on spreadsheets Numbers between my Mac and iPad, but can not get my iphone to receive transfers?  The numbers icon at bottom left of the screen, but none of my worksheets appear on my iPhone.

  Did you numbers is synchronization correctly via iCloud on your iPhone?  You could check that the connection of numbers to iCloud is turned on at two places:

  Settings > iCloud > iCloud Drive > numbers

  and,

  Settings > numbers > use iCloud

  SG

• I followed the instructions to set up the home between my Mac and iPhone sharing 6, but I don't understand all the music on my iPhone

  I followed the instructions to set up the home between my Mac and iPhone sharing 6, but I don't understand all the music on my iPhone

  I have confirmed:

  (1) devices are on the same network

  (2) I am connected to my AppleID with the same account

  3) are my OS up to date (Mac 10.11.2) (9.2 iPhone)
  (3) I closed iTunes and the App has reopened

  (4) I turned my iPhone off and rebooted (and confirms the foregoing)

  On my iPhone, I see in my music library, different ' kind' listed (e.g., classic, recently added, music of the 1990s, etc.) but they are all empty.

  Im hoping to see the music I have in iTunes on my Mac and play these songs on my iPhone.

  IM thinking, music that would be shared from my computer to my phone will be on the cloud?

  (I did not all default to add my music in the cloud at the moment).

  Post edited by: abbeyinor

  Did you go into settings > music on your phone and sign in home sharing?

  See you soon,.

  GB

• Notes will not sync between my Mac and my iPad

  Hello. I noticed that my Notes are not sync between my iPad and my Mac.

  In my iPad I have iOS 9, in my Mac I have the Mavericks.

  I checked in iCloud dot com, and my notes of the iPad are here,

  but my notes from my Mac are not there.

  I'm not sure but I think that this started happening after I upgraded to iOS 9 on my iPad.

  Any ideas that I can synchronize Notes between my Mac and my iPad?

  Thank you.

  You must upgrade to a later version of Mac OS X, because these Notes are created in the new application 'Notes' that is only supported by iOS 9 and OS X El Capitan.

  http://www.Apple.com/OSX/how-to-upgrade/

  I hope that answers your question.

  Best regards

  Austin

• 8.5.1 LabVIEW Student Edition - differences between the Mac and Windows versions?

  Hello

  I just bought the student of LabVIEW 8.5.1 version and I use Mac OS X 10.4.11. What are the biggest differences between the Mac and Windows versions, since the box came with a CD of installation of Mac and a Windows DVD Installer?

  See you soon

  Looks like you got the LabVIEW Student Edition Software Suite DVD.

  It comes with 6 boxes to tools, and the TME product, some (or all?) of those who are windows only (at least 8.5), for example:

  • Toolkit Digital Filter Design
  • Modulation Toolkit
  • SignalExpress
  • ...

  Since you have 8.5, you are missing also a few basic things that only recevied at the 8.6MAC support, like Mathscript, Control design and Simulation and native 3D graphics.

• I just had a software problem with my Mac. and had to reload everything with Apple. Only one problem. Lightroom is gone. Apple said that the address has changed. How can I get my pictures back? Can anyone help?

  Hi all

  I just had a software problem with my mac and had to reinstall everything using Apple. One problem, lost lightroom 5. Apple said that the code of the address has changed. How to recover my photos or have I lost?

  At soon Pete J

  Hi Pete,.

  You can install Lightroom via this link:

  Download Photoshop Lightroom

  However, to get the rear changes you have previously done in Lightroom, you need to get the backup of your previous Lightroom Catalog.

  Store you the backup of your Lightroom catalog before recharging your Mac OS?

  Kind regards

  Claes

• I had a problem with my Mac, and I have to reinstall Adobe Photoshop CS4, I have on a CD. I put the serial number I have on the cover, it takes it. another window opens and ask for the serial number. again, I put the same number and he said to me: not val

  I had a problem with my Mac, and I have to reinstall Adobe Photoshop CS4, I have on a CD. I put the serial number I have on the cover, it takes it. another window opens and ask for the serial number. again, I put the same number and it says: invalid.

  where will be the second serial number?

  Help me please.

  Thanks, Abe

  Hi,

  Please see error "serial number is not valid for this product". Creative Suite and serial number incorrect error

  Kind regards

  Sheena

• Flow of work between a Mac and a PC

  Hello

  I may be updating my systems of final Assembly at first and would like to know if a mac and pc user can work together on the same projects with a cheque to?

  Basically, I am a graphic designer working on the set of the text and the graphics and need capacity (without having to buy a mac) to share a calendar with my video editor.

  Hi Jason,

  There is no ability to checkin/checkout on Premiere Pro natively, although there are solutions that provide this functionality.  With the first, you can use the same project on Mac or PC.  The only thing to know is that there are boundaries between the BONES in terms of types of files.  For example, you typically want to stay far .avi on Mac if you can, even if Quicktime can read.  However, I usually open a project on a platform without thinking, which is a good thing! ;-)

  Hope this helps,

  Dennis

• A license can float between a Mac and a PC?

  I have a Mac and a PC. Some projects are better made on each. A cloud license can be used on either? A bet of licenses later transferred from a PC to a Mac does

  Remove the license on a computer http://forums.adobe.com/thread/1442423?tstart=0 can help

  -http://helpx.adobe.com/x-productkb/policy-pricing/error-maxium-acitvation-exceeded.html

• After effects crashes when switching between applications (Mac) and After Effects does not start after you enable journaling

  Hey there,

  When to (for example), Illustrator and AE program seems to have a greater likelihood of crashing. I was not able to determine exactly why this is happening.

  I often copy - paste forms of AI in AE, but it is not always plant AE. It could be the speed with which I switch between programs, but I'm still not sure about this.

  In addition, it breaks the audio driver somehow and Spotify (running in the background) stops playing. Restart Spotify corrects this problem.

  AE crashes and is often frustrating. I sent Crash Reports, but so far no help.

  I just activated registration--which has also caused some AE to fail. This time when (re) launch the program. It wouldn't start, but also did not highlight as suspended in the Force Quit of OSX dialog box. She would not answer Force closes and hung my system when I tried to reboot. You had to manually restart my Mac Pro.

  Well, variable time!

  Mac Pro (end 2013) 3 GHz 8-Core

  64 GB of ram

  OS X Yosemite (10.10.2)

  After Effects CC 2014 with the latest updates

  Illustrator CC (not 2014) same with the latest updates

  He does not behave like that on my iMac at home.

  Any advice would be (very) welcome at this time.

  Huh! I should have checked the settings correctly. It is a facility relatively new compared with at home.

  Solution: Check that there is enough RAM available for other programs.

  In addition, light AICB could do the trick, too. But I suspect that the latter has a much greater effect.

• conection problem between labtracer2.0 and Keithley 2400 meter Source

  Hello

  I have a problem of the connection between labtracer2.0 (published by Keithley,) compiled on Labview and Keithley 2400 meter Source.

  My basic connection is Source Meter2400, card GPIB (from Keithley) and Labtracer2.0.

  Although I have installed the run time Visa 4.4, and labtracer2.0, I can't use labtracer control 2400 and get the data from it. The warning information indicate that the labtracer cannot find the run-time information, or there is a script error if I run the test several times.

  In fact, this system is ok last week. The higher present problem after I install Matlab and KTEI for Model4200 of Keithley. Although I uninstall them, the problem still exists.

  I tried to uninstall and install all relevant sofe. But the problem still bothers me.

  I need your help.

  Thank you very much.

  Hello

  I do not know what is causing this problem, but there are some measures we can take to restore your system before installing the new software. This problem is probably caused by registry keys over written by the new software.

  First of all, you need to uninstall all software of NOR. Then, follow the instructions in the word document that I joined the. It will use the MSIblast utility to clean all your registry keys.

  We then, navigate to your System32 folder and delete cvirte.dll and cvirt.dll of your system files. Now, when reinstall us NI-VISA 4.4, the software will reinstall the correct versions of these files.

  This process, you should get back to where you were before the offending software.

  Thank you

• Port-channel problem between fabric Interconnect and vPC N7K

  Hi all

  I have a problem with the Port Uplink channel between fabric interconnect with N7K using vPC

  It's my network for the UCS deployment topology

  

  N7K I configured vPC for red link and green linkto the fabric Interconnect A I has configured the Port-Channel with Member is Port 1 and Port 2, uplink is red link. Interconnection fabric B, I have configured the Port-Channel with Member's Port 1 and Port 2, uplink's green link.

  The interface port-channel on N7K show is good, each port-channel upwards and have all members. But the fabric Interconnnect, when I see in the UCS Manager, the status of the Port-Channel on Fabic A and fabric B dysfunction not more info: no operational Member. Although all the link is a link to the top and I've got the status of the Port Channel is enabled in the UCS Manager. When I see the properties Port 1, Port to Port-Channel 2, I see the number of members status is: individual. This means channel port is not up and no member in this configuration. I want to using the port-channel load balance and more bandwidth for the uplink of 20Gig. I don't understand why?

  Please help me solve this problem, I have to send the screenshot of UCS Manager when I show the status of the Port-Channel and Port-member in port-channel to reach items.

  Can someone help me solve this problem, thanks a lot. References, please include elements for more details on the fault.

  Thank you

  Trung.

  Hello Nguyen,

  Since the two N7k please collect:

  SH cdp nei

  SH run membership in. X int

  SH sum port-chan

  Thank you

  Matthew

• MView delta deploy problem between SDDM schema and db (Swap models target dictionary import) - overview of the DDL generation

  Hello

  I'm having a hard time to reverse the difference between my role model and my fusion database schema.

  The initial goal is simple:

  1 / detect differences in metadata

  2 / I SDDM to generate the DDL change code

  (if possible, if not, recreate, reload: powerful existing featured BTW)

  3 / deploy

  4 / check/confirm that no more delta existing

  I do this:

  * menu file > import > dictionary

  * Select connection

  * Select the db schema

  * check the "Swap target model.

  * Select MY_MVIEW > next (TABLE 1 DB object to import) > finish (work "Generate Design")

  * in the model comparison window, I have to deselect everything, less table MY_MVIEW AND also MY_VIEW Materialized View

  (as they appear as 2 SDDM objects)

  DOF Preview button

  I see:

  -comments created in first place (whereas the MVIEW should be recreated)

  which is smaller but still blurs the legibility

  -MY_MVIEW is systematically recreated

  (how many times already I deploy)

  I figured out:

  . SDDM objects tables (disorders, implemented in the MVIEW form) and host MVIEW (Physics) the query independently

  . even if I sync them manually (copy - paste), DDL deployed code is not strictly identical to

  So it may have to do with a dysfunction compare?

  SDDM is full of options to desensitize compares (physical exclusion, storage, etc.), but I found no way to simply compare and align MVIEWs

  (and the documentation is rare on the subject)

  Any clue?

  THX

  Interesting.  Looks like you're it's partitioning that is causing the problem.

  In a model, partitioning information can be held on the objects of physical model for Tables and materialized views.

  In the case where a Table and materialized views are linked together (by the implementation as a Materialized View on physical model Table property), it is information of partitioning that is held on the Table which is relevant.  The information on the Table is used when generating DDL.  And in an import or synchronize, partitioning information are added to the Table object.

  I think that what is happening in your case probably is your model includes some details of partitioning maintained on the Materialized View object.

  Synchronization is combining the details of your database partition to the Table in the model.

  As it does not associate the details of partition of your database with the materialized view in the model object, the comparison shows a difference for the materialized view:-not partitioned in database, but partitioned in your model.  And this difference is causing the drop and re-create the view materialized in the DDL.

  There are various options to work around this:

  1. you can remove details unnecessary partitioning and maintained on the view materialized in your model object.

  2. you can clear the check box for the entry for materialized views in the tree in the dialog box models to compare before making the DOF preview.  (But it also means that no DDL will be generated for all other differences in these materialized views).

  3. you can use the filter properties to filter the relevant properties (e.g., partitioned, partitioning columns and Subpart columns for Materialized View objects), and then select the button refresh trees before performing the DOF preview.  (See the screenshot below).

  

  David