MX330 printer will not print. power WiFi ok

Similar Questions

• My iPod touch will not connect to WiFi and I followed the steps posted. Also, when he dies he thinks that it is December 31, 1969. What can I do to fix this?

  My iPod touch will not connect to WiFi and I followed the steps posted. Also, when he dies he thinks that it is December 31, 1969. What can I do to fix this?

  Not knowing what the 'followed the steps posted' have been

  The iOS device connects to other networks? If Yes, which tends to indicate a problem with your network.

  The iOS device sees the network?

  Error messages?

  Other devices connect now?

  The iOS device has connected before?

  Try the following to rule out a software problem:

  -Reset the device iOS. Nothing will be lost

  Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to

  ten seconds, until the Apple logo appears.

  -Power off, then back on your router

  . - Reset network settings: settings > general > reset > reset network settings

  - iOS: troubleshooting connections and Wi - Fi networks

  If your iPhone, iPad or iPod touch connects to a Wi - Fi network

  - iOS: recommended for WiFi routers and access points

  -Restore from backup. See:

  iOS: how to save

  -Restore factory settings/new iOS device.

  If still problem and it does not connect to any networks make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.

  Shop Apple Store - Genius Bar

• Printer will not connect via WIFI

  I'm continually offered an update for my CANON MG3250 printer, I've now had 8 in the past two months, and all were successful. Now my printer doesn't work! that is, it does not connect via WIFI, but will work on cable? All ideas/solutions please.

  Hello Nigel,

  Thank you for your response.

  I'm sorry for the late reply.

  I appreciate your time.

  I suggest you to refer to this article and check.
  Reference:
  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1

  Please keep us updated.

  Thank you

• IPOD will not start power over

  My ipod touch will not start after as I hold down the power button / stop for 10 seconds; other on my ipod touch for 10 seconds, at the same time & release button with no luck.

  Any other way to get the iPod touch to start or turn it on?   Who sets the ipod touch?  A centre of repair or store for ipod touch?   What are the costs of repair.

  Try the remaining shares of:

  - iOS: do not respond or does not light

  -Also try DFU mode recovery mode post-test

  How to put iPod touch / iPhone in DFU "Karthik doodles."

  -If failed and that you cannot completely turn completely the iOS device, leave the battery to drain completely. After loading a hour repeat the foregoing.

  -Try a different cable

  -Try on another computer

  S ' there is still not successful that usually indicates a hardware problem and an appointment at an Apple store Genius Bar is in order.

  Shop Apple Store - Genius Bar

• L850 satellite will not connect to Wifi

  Hi, new here.

  I have a Toshiba L850 which does not connect to wifi,
  Many other devices in the House and the L850 was last week.

  You can see my router but will not connect.
  It is the 'limited access' connection, but not more.
  Said troubleshooting couldn't identify the problem.

  When I try and access the Device Manager, I get a "Explorer.EXE" the specified service does not exist as an installed service?

  Help.

  Paul.

  > He sees my router but will not connect.

  I guess that your router is secured by encryption (WEP or WPA / WPA2)
  Test WiFi connection without the use of WLan encryption settings.
  Turn off in the router settings and test the connectivity.

  Of course you need to do that just for test purposes because it s not advised to use the unsecured WiFi.

  Where you have no problem to connect the laptop to 'open' WLan, I recommend changing the encryption type.

• phone will not connect to WiFi

  Hi, my phone is not connecting to WiFi
  It was fine to start with and now it does not work. I tested my WiFi with others and they all get the signal and excellent connectivity.
  My z2 is either stuck in step "obtaining the IP address" or telling me he avoided a bad connection, despite the fact that I have this option disabled.
  I tried turning everything market, I tried forgetting the network and reconnect. I tried to unplug my swr10 smartband I read another post suggested that it caused problems.
  Nothing works. It will be not just to connect to my WiFi at home.
  I read a post suggesting the firmware requires a downgrade but I'm not technical interest and I'm afraid to try because it is a new phone and I don't want to void the warranty.
  Someone at - it ideas?

  I think that I have solved it without going through the firmware downgrade. I went to advanced, disabled wifi wifi optimization. Then he returned, and then rebooted the phone. WiFi has been the connection perfectly for this, but as I do not understand the phones I can't offer an explanation as to why! It has been working well for 3 days now. I'll keep it under control, but it is worth a try for someone else in the same situation. I also have a colleague with a z1 which must have WiFi optimization disabled permanently to run WiFi, once again, don't know why but yet once worth a try.

• or no, he will not turn power stay gray icon, so I can't display it on the taxtbar

  Why the power icon will not appear in the taskbar, I right click on the taskbar and it will not yet show, remains gray. Thank you

  Using a laptop with a battery or a desktop computer with a UPS (Uninterruptable Power supply)?

• iPhone will not connect to WiFi

  I have an iPhone running iOS 10 6. Since I have updated to iOS 10, I had problems connecting to WiFi. It happened the first time I've updated and I read that it could be some issues with the latest iOS, therefore, some recommendations to restore the iPhone, I did and it set for a few days, but once again, the issue is back.

  When I go into WiFi mid settings it does not recognize my WiFi network, but as he said 'safety recommendation' when I hit I got a message that says "low security, WEP is not considered as safe. Configure your router to use WPA2-Personal (AES) security type for this network"

  This message never came until it again once I have updated to iOS.

  Any thoughts?

  Thanks in advance!

  Hello

  Follow the steps here:

  • If your iPhone, iPad or iPod touch connects to a Wi - Fi - Apple Support network
  • To connect to the Wi - Fi on your iPhone, iPad or iPod touch - Apple Support

  Apple recommends the parameters of the Wi - Fi routers and access points are detailed here:

  • Recommended settings for the WiFi routers and access points - Apple supported

• Satellite Pro L300 will not connect to Wifi after hibernation

  Hello

  can someone there help me please?
  I have a Satellite Pro L300 and it does not connect to Wifi after hibernation.

  The only way to do it is to restart the pc.

  Any suggestions?

  Hello!

  I m using a Satellite L300, which should be similar to yours and I peut t noticed this problem. WiFi works perfectly without any problems.

  In any case, I would recommend updating the driver WLAN and the BIOS. The two you can find on the Toshiba site:
  http://forums.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In addition, you run the factory settings or you have installed a different version of Windows?

  Good bye

• iPod touch will not connect to wifi, I have tried everything!

  I used this touch iPod for over a year, and all of a sudden, it does not connect to wifi. I type the correct password, but he responds with "wrong password". I checked since then with several computers apple and iPod touch on the connection and that's fine. I even had these devices 'forget' the network and reconnect without any problem. I also had new devices to connect to the same wifi signal. I know that's not the router. I reset the network settings, reset the content and settings. I tried to restore then connected to iTunes and told to disable Find My first iPhone, but should not be my apple ID password. When you are connected to iTunes I put the iPod into recovery mode (connector pointing to iTunes screen show) and reset to factory settings and it won't always connect to the wifi. I'm looking for ways to solve this problem all over the internet and I'm out of ideas. The iPod is updated to the current 9.1 iOS. Someone at - it else I can try?

  It connects to other networks?

• laptop will not find my wifi of 5g

  MY NEW HP PAVILION MODEL NAKED 17-E101SA WILL NOT PICK UP MY VIRGIN 5G ROUTER ONLY MY 2G SIGNAL WHAT'S

  Hello

  The following link shows its specifications:

  http://support.HP.com/us-en/document/c04059025

  He ONLY support "802.11b/g/n (1 x 1)', so it will not be able to pick up 5 GHz of bandwidth."

  Kind regards.

• HP2504 printer will not connect to Wifi

  Install hp 2540printer out of box and put in the ink. IM it works with a mini iPad 2 and one iphone 4S.
  Bought this printer because it is advertised for use with mobile phones and tablets. I downloaded the app eprint and tried to connect to BT Voyager router. Not connecting not can't find the printer message shown

  Hello ellenkev,

  Welcome to the Forums of HP Support!

  I see that you are trying to configure a Deskjet 2540 to work with a couple of Apple devices. This printer is the best Setup on a network with the printing software and a computer, with that said, it can also be done with an iPad.

  Follow the steps I gave here: Re: 2542 Hp.

  Good luck.

• Remote Desktop will not work on wifi?

  When I connect to my computer via wifi it disconnects from the network the minute I connect remote is there a way to prevent this, so I can access my computer remotely? I tried to goto Device Manager and uncheck the "Allow computer to turn off this device to save power", but this still does not work I tried to google this problem but I can't find anything that will help me... I have windows 7 x 64 ultimate wireless card I have is built in its an Intel PRO/Wireless 3945ABG if anyone can help that would be great thank you feel free to ask me more questions on My problem. Thank you

  Hello

  I had the problem at home (in my home LAN), but when I try to connect to the Office at home as well.

  The problem is in the Wifi connection of the laptop which I wanted to open a session.

• IPad Mini will not connect to WiFi

  My IPad Mini does not connect to my WiFi at home. All other devices in the House are connected correctly. It seems that my IPad Mini or the router. I was working well until that Friday. I have reset the router and the IPad Mini, forgotten network, rebooted both, and nothing seems to work. Any further suggestions?

  I suggest to do a hard reset (hold home and power button at the same time) If you have not already tried it. That's worked for me before when nothing else has.

• FN + f5 will not turn on wifi

  I did a clean install of windows 7 on a L512 I bought without operating system on it. I installed different drivers, but so far I can't get wifi to turn on with switch function as it should. This seems not to be a rare problem and it seems to be on the drivers but I don't know which driver could not fail...

  You will probably need to install the package "Hotkey features Integration.

  From there.