My antivirus Windows will check my linux too?

Similar Questions

• My CPU is still about 50-60%. I will open another window to check my mail and it will jump up to 100%.

  Original title: is this the right category?

  I don't know even what category my question but here goes.  My CPU is still about 50-60%.  I will open another window to check my mail and it will jump up to 100%.  Sometimes I read a story and I'll type in a comment and it's like I had a little in my keyboard or something?  I'll hit a key and hit nothing.  I have to press the button again, then again and then he will type the letter.  I can't type normally because half of the letters will be absent, I have to press a button at a time and wait to see if the printed letter.  Sometimes whole window freezes just straight up.  You cannot close the window, go to one of the other tabs, it's just frozen.  I can open a new window and it will be fine but that frozen will be there right behind the new window I opened.  Some say that this is my keyboard but I'm here and it's good.  While some say that I have a virus or something but I used my Microsoft Security Essentials to scan and it says: there is nothing there?  Unfortunately, I do not know too much about computers.  I will probably not even be able to find the answer if someone replies to this?  Any ideas?

  The file is fine, but you don't seem to have the problem of CPU when you ran the trace, because the CPU max usage for all processes was ~ 10%.  The largest user was iexplore to around 2%.

  You must re - run it when your cpu is having the problem.

  

• Windows will warn if Check Disk detects irreparable damage?

  For Windows 7, if the disk check utility is used on the C drive and includes a review of surface (what will happen to the restart of the computer), Windows will notify the user in a clear manner if there is a critical problem found, or it is entirely up to the user to look in their system logs later and interpret to understand if the disk check found something he could not repair?

  Windows will not "ci".  To see the results of chdksk after the reboot, open Event Viewer and look in the Application log for a recent event of Wininit and open.  The complete chkdsk log will be there.  If it is long, it is easier to read if copy you and paste it into Notepad.
  (In XP it was an event of Winlogon, rather than Wininit.)

• Installation/uninstallation program has stopped working.__A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  I tried to download a program: System Mechanic Professional 9.0 www.Iola.com
  I recorded it on the desktop, right-click to run as administrator, at this stage, it starts to download but the following message comes to the screen: install/uninstall program has stopped working.
  A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.
  Of course, nothing happens after that and I close the message. I bought this on the internet and I have the activation code. It's good for 3 pc. I put it on my desktop and it works very well. My laptop is Vista Home Premium with 64-bit operating system. Everything else seems to work fine on my laptop but I desperately need this program. Laptop is so slow and Firefox takes forever to open the pages. I get a lot of messages it does not!
  So I appreciate any help you can offer.

  Hi luv2shop,.

  This problem may occur because of the conflict by the present security software on the computer.

  I suggest you try the following steps:

  Step 1: Disable security software, follow the steps mentioned below

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Important: Activate security software once everything is done.

  Step 2: use the Windows Installer Cleanup utility for delete all entries that are related to the product you have installed wrong:

  Download and then install the Microsoft Windows Cleanup utility. To do this, see the Microsoft Web site:

  http://download.Microsoft.com/download/e/9/d/e9d80355-7ab4-45b8-80e8-983a48d5e1bd/msicuu2.exe

  Save the file to the desktop. When the download is complete, double-click the file and then follow the directions. When the installation is complete, click Start, point to all programsand then click Windows Installer Cleanup.

  In the list of the products installed , delete all entries that are related to the product you have installed wrong. If there are too many entries, click select all, and then click Remove. When you have deleted all entries, click exit, and then start the installation of the product

  Description of the Windows Installer Cleanup utility

  http://support.Microsoft.com/default.aspx/kb/290301

  Step 3: Set the clean boot computer and try to install the program

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7 
  http://support.Microsoft.com/kb/929135

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  If the problem persists, you can check with iolo for known problems

  http://www.iolo.com/customercare/

  Note: Make sure that (double check), you install the right version (32bit\64bit) for your computer.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot install Windows updates (Windows cannot check the updates)

  I have 10 computers networked with a Windows SBS11 server as a domain controller. The 10 computers, 6 of them are Windows 7 Pro (64 bit) and the other 4 are Windows Vista Pro (32 bit). All computers stopped Vista download of updates ago and which gives an error, the message "Windows cannot check for updates. When you try to check for updates manually or automatically that the error is displayed, but it should not be any problem with the updates are downloaded and installed on Windows 7 computers.

  I tried the following:

  -Ran the system update tool.

  -Execution of Malware Bytes and Vipre Antivirus analysis in safe mode. No infections found.

  -Disabled the firewall and restarted the search.

  -Reset the proxy server using the winhttp netsh from the command prompt.

  -Restarted Windows Update Services.

  -Ensure that the BITS Service is running.

  -GPO update for Windows updates not be configured on computers.

  -Change Windows Update settings to allow the manual update. Allowed for the updates to install, but after computer restart returned to the old settings and error appeared.

  If there are any other suggestions I would greatly appreciate.

  It is a forum for specific consumers. You will find support for Vista forums in these IT Pro: http://social.technet.microsoft.com/Forums/windows/en-US/home#category=windowsvistaitpro

  Note: If the Vista computers are not fully patched, they should not be connected to the internet or the local network!

• How can I get my text etc to fit my window? now it is too big

  apparently due to an upgrade, now my text is too large to read without navigating around.  I checked the highest resolution and dpi is the lowest (960) any help out there please?

  Hello

  There are a number of things to try:

  try going to your graphic card manufacturers site or computer and are looking for the driver download section

  Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

  then try to make the screen of solution of problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  Change the screen resolution

  __________________________________________________________

  or try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  ________________________________________________________

  and change how to get updates for you to choose what you install to stop it happening again

  You may need to install one at a time to find the problem, we

  Make sure that you do not use Windows Update to install the drivers of 3rd material part

  Find them directly in the hardware manufacturer

  and when you see the problem update right click on it - UAC prompt - then hide it

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Download updates but let me choose whether to install them - if you select this option, Windows will download the updates on your computer, but not install them automatically. If you want to install updates, then you must install them manually. You should only select this option if you have a reason to not install updates automatically. Only advanced users should use this option.

  Check for updates but let me choose whether to download and install them - if you select this option, you'll be alerted when there are new updates available for download and install. You can then choose to download and install the updates that you want. This option should really be reserved for people who know exactly which updates they need, or those who have little access to the Internet.

• Windows will not stop automatically as it has done for years. What is going on???

  I have to say?  I already said repeatedly that WINDOWS is STOPPED NOT AUTOMATICALLY ON MY COMPUTER BECAUSE IT has FOR AS LONG AS I'VE BEEN ALIVE, WHO IS NOW EIGHT DECADES.  WHAT ELSE DO YOU WANT?  WHAT ADDITIONAL OBSTACLES HAVE TO JUMP UNTIL I CAN GET A SIMPLE ANSWER OR SIMPLE HELP?  WHAT HAVE I DONE IT SO HORRIBLE IS THAT OF A SUDDEN WINDOWS IS LIKE THAT.  I'M A COOL GUY WITH SIMPLE NEEDS, BOTH IN LIFE AND TECHNOLOGY.

  Hello

  Please do not type in capital letters as it is difficult to read and considered to be shouting.

  ---------------

  Check your antivirus/antispyware/security programs as a possibility. Especially if they check
  removable drives on shutdown. Sometimes it takes actually uninstall it to see if
  they are part of the issue (and controls removable drives are not the only symptom these)
  can cause). Not having not more than one program antivirus/security, all on the same system if
  used, and uninstall them can leave problems causing remains.

  List of tools to clean/uninstall anti-malware programs
  http://social.answers.Microsoft.com/forums/en-us/msestart/thread/407bf6da-C05D-4546-8788-0aa4c25a1f91/

  ----------------

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  ===========================================

  Refer to these discussions because many more excellent advice however don't forget to check your antivirus
  programs, the main drivers and BIOS update and also solve the problems with the cleanboot method
  first.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  Hope these helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• In Firefox 29 Center by clicking at the top of a tab in a zoomed window will open a closed tab previously instead of close the tab you clicked on

  In Firefox 29 Center by clicking at the top of a tab in a zoomed window will open a closed tab previously instead of close the tab that you clicked.

  Is this expected behavior? And if so is it possible to turn it off?

  Thank you

  Middle-clicking on a tab the farm, any means - by clicking on an empty area of the tab bar opens a new tab.

  A different behavior is probably caused by an add-on like Tab Mix Plus tab-based. If you are unsure if you have a such add-on, restart Firefox with disabled modules and check if the problem persists.

  • The problems of Firefox in Mode safe

• Re: Satellite Pro L300 - update after the BIOS, Windows will not start

  Hello

  I updated the BIOS on my laptop to the latest version and now it does not start in Windows. I can get to the BIOS menu. I tried to restore the default values and saved the day, but he's just a blue screen with writing on whichIi do not have the time to read it before it tries to restart and continues to do the same.

  Any ideas anyone?

  see you soon
  Phil

  Hi chaospunx,

  Which HDD mode did you use before the BIOS update? Perhaps this option, you need to change, then Windows will start up again.

  You can choose between the mode of access AHCI and Compatible HARD disk.
  Check this box!

• Why my TestStand deployment installation appear under my Windows will not start menu of my target machine?

  Why my TestStand deployment installation appear under my Windows will not start menu of my target machine?

  I managed to install the deployments of work to the target machines. However, I expected to see the classified facility "My TestStand system" in my Start menu, but it is not. Am I misunderstanding something here?

  Also, if I do another target second deployment to the station as "My TestStand system B", all LabVIEW files in my previous installation for "My system TestStand" disappear from the directory (c:\Program Files\My TestStand system) target.

  I use TestStand Professional 4.2.1 on Windows XP and LabVIEW 2009 development station.

  Thank you Paul,.

  That solved my second problem and inspired me to look deeper for the response to my first problem. The answer lies in the tab 'distributed file","Installer properties' box 'create a program item:

  

  Wouldn't be nice if it is automatically checked by default for main sequence files? Wouldn't also nice if "Upgrade Code" was regenerated automatically by default whenever we have saved the file *.tsd under another name?

  Thanks again,

  Eugene

• How do another firewall my default firewall? I have to start firewall CA every time I connect and the firewall Windows will are also not activated.

  How to make another firewall that windows firewall my default firewall? I have to start firewall CA every time I connect and the firewall Windows will are also not activated.

  Hello

  • What version of Windows are you using?

  You can check this link:

  http://Windows.Microsoft.com/en-us/Windows7/Firewall-frequently-asked-questions

• Windows will not be updated vista, error code 8007010 error help 643.__please b!

  Windows will not update

  eddyboylip,
  If you are still having this problem then you might be able to do both of the following:

  Disk error checking

  System File Checker

  If the System File Checker corrects some problems then try the updates again. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

  How can I fix a customer Launcher.exe gambling problem which could cause it to stop working?

  The Client Launcher has no openings of the problem and update games reviews, events and the server info maint. etc., by clicking on the game where is installed the client takes me to this start page of games.  But that's all.  From there, I click the START GAME button and immediately the Game Launcher stops working.  Then the pop-up message running runs saying A problem with launcher did stop working.  This problem report has been sent to Microsoft.  The Windows notification Qmessage closes leaving the Message of Microsoft Windows.  Says that Microsoft will inform me with a solution when it becomes available.

  In courses now since mid October 2010 and the problem is still a problem.  Here are the details of what I tried.

  Solutions provided by the Support Help Desk game still worked so let my forced. and still in treatment.

  I completely uninstalled and reinstalled the game client and game more then enough time and that did not help.  Even tried mirror download sites.

  Windows Vista is up to date, the hardware and the drivers are all up to date. System requirements to run the game is ok.  (I triple checked cause the game worked initially.)  I could even play other games in the game Client.  One day, while he was playing in the game he closed and stopped working.  A bit like you have been started from the server).   Since I could open the client and click on a game to see.  clicking on start game triggers the Launcher of client to stop working.

  I cleaned up my registry and it fixed and did a cleaning disc.

  I read every help file in the hope of finding something or something, anything that would be useful. Impossible to find a solution.

  I used the recording of events where there is a link Option to support for the error that occurred dansMon event systems online.  There was no solution available.

  I have reviewed the troubleshooting on the Microsoft TechNet site. Cannot find the fix there either.

  I've exhausted all my resources I can think.

  So if there is someone who can help me solve this problem once and for all, my son and I'd love to hear from you.

  Thank you...

  whoknowsu...

  Hello

  Please try to install the game in compatibility mode.  Here is some information that can be very practical...

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  -Check the functionality of the game under a spare user account

  Uninstall/reinstall the program

  -Clean Boot http://support.microsoft.com/kb/331796

  I hope that this information is beneficial.

  Thank you

  Aaron
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Whenever I click on recorded TV I get this message "Windows Media Center has stopped working. A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available. »

  Title: original problems to access TV on Windows Media Center recordings

  My media center has suddenly stopped working for recorded tv.  Whenever I click on recorded TV, I get this message:

  "Windows Media Center has stopped working.  A problem caused the blocking of the program works correctly.  Windows will close the program and notify you if a solution is available. »

  All other features of the media center work correctly.

  Any help would be appreciated.

  Hi vater19,

  Remember to make changes?

  Method 1: Run the installed TV tuner Troubleshooter and check if it makes the difference

  Open the Setup TV tuner Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-set-up-TV-tuner-Troubleshooter

  Method 2: Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:  You can see the steps presented by Umesh P, post dated Tuesday, September 7, 2010 16:49, in the link below that relates to a similar question
  http://social.answers.Microsoft.com/forums/en-us/w7pictures/thread/7b4afa49-cb84-4BF3-A306-bc0bbb5e9f70

  Thanks and greetings

  Ajay K

  Microsoft Answers Support Engineer
  ***************************************************************************
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows cannot check the updates - C800044E error code

  Hello

  Since yesterday, I get a notification icon in the taskbar indicating that windows cannot check the updates. If I click on the icon and then click on the button "check for updates" in the new window, the search end reports that an error has occurred and the error code is C800044E. This happens every time after the computer starts and when I try to manually check for updates.

  The operating system is Windows Vista Home Premium 32 bit with OEM license.

  I already googled for this error code, but none of the suggestions found during the search worked. Mode by default with no results, I installed the MicrosoftFixit50202 (have not tried yet aggressive mode). I ran the malware Microsoft Windows (without threats found) removal tool. I downloaded and installed manually the KB947821 update for vista, also without results.

  The last successful update is dated more than a month previously, and I assume that at the same time, some important updates may appear. Can someone help me with this problem?

  I've already solved the problem by using the system restore (I used a restore enjoyed a week point).

  I'll answer your questions anyway, in which case this may help solve one similar problem to others:

  1 Vista SP2 (all updates important/critical installed as of October 1, 2010)

  2. Eset NOD32 antivirus/antispyware with current subscription. No third-party firewall (just the windows firewall).

  3-4. I have never installed a Norton or McAfee application on this computer, but I'm not sure if a trial version of Norton AV is pre-installed with this computer (if it did, I removed it when I originally set up the computer - almost 3 years ago).