My application was rejected by the version mismatch

Similar Questions

• The specified package was rejected by the device and can not be loaded

  Hello

  I develop an application, it works very well on my Simulator... but when I try to run it on the device, it gives me error

  "The specified module was rejected by the device and cannot be loaded"

  I use Blackberry JDE 5.0. Can you help me please? its really urgent.

  Thank you

  Gunjan

  I guess that the storm is running OS 4.7. In this case, you need to compile the application in any JDE<=4.7 .="" there="" is="" a="" general="" rule="" that="" the="" jde="" version="" should="" be="" less="" than="" or="" equal="" to="" the="" os="">

• events iCal was rejected because the quota is exceeded

  I use iCal for my small business on 7 devices and for some time, he started acting strange: the return to the original event when you try to duplicate and modify an event. And now, it seems not to be sync with devices.

  I had one! message indicating that the iCal event was rejected because the quota is exceeded, but I Go 4.59 out of 5 GB available.

  Someone at - it that happen? All the patches?

  Thank you

  ~ L

  ~ L,.

  According to iCloud: limits for Contacts, calendars, reminders and bookmarks - Apple Support:

  • Total number of calendars, events and reminders: 25 000
  • Maximum number of calendars and recall lists you can have combined: 100
  • Maximum size of all data from calendar and reminder (not including attachments): 24 MB
  • The maximum size of all attachments to the event: 300 MB
  • The maximum size of a calendar event, including attachments: 20 MB
  • Maximum number of attachments per event: 20
  • Maximum number of participants, you can invite to an event: 300
  • Maximum number of people with whom you can share a private calendar: 100
  • Maximum number of characters in a title of reminder: 100

  Perhaps one of these limits is exceeded?

  

• There was an update to Windows XP sp1 would recognize higher than 127 readers ~ 137 GB, why this update was not in the version later service pack?

  (1) there was an update to Windows XP sp1 would recognize higher than 127 readers ~ 137 GB, why this update was not in the version later service pack?

  (2) where can I find so that I can then reinstall windows XP, updated to sp1, install the patch to see the complete player to sp2 and 3 can be installed?

  original title: supervision XP

  Maybe the disc has been formatted as part of your original installation of Windows XP with a pre - SP1 version of Windows.  At that point, he could only format the drive as 137 GB.  After you upgrade to a post-SP1 version of Windows, look at your hard drive with Disk Manager (start-> Run-> "diskmgmt.msc").  It can show the rest of your unused space that you might then be able to allocate in a second partition.

  If you want to keep one big partition, you will need to get a 3rd third party tool that can extend your current 137 GB partition to use more of the available space.  Google for it, plenty of them out there including those that are free.

  HTH,
  JW

• Every time I have get or send emails I get an error "the message could not be sent because one of the recipients was rejected by the server. 0x800CCC79.

  The message error message could not be sent because one of the recipients was rejected by the server.  No, Server error: 450, error number: 0x800CCC79 but the message is not in the sent box to remove.   I know that I used the wrong email address.   Error message is popping up every time I'm looking for or send emails.  Help

  Hello

   
  1. What on the computer email client do you use?
  2. who is your provider of mail Service?
  
  You can perform the methods provided for in article knowledge base provided if the problem is when you send mail in outlook.
  Troubleshooting error messages that you receive when you try to send and receive e-mail in Outlook and Outlook Express
  http://support.Microsoft.com/kb/813514
  
  If it's a hotmail issue, it would be better suited to the Windows Live community. Then I suggest you visit the link that will provide the best support.
  http://www.windowslivehelp.com/product.aspx?ProductID=1

• Why to have latest version of applications was replaced by the earlier version after Migration Wizard

  I recently bought a new iMac running the Version OS X El Capitan entered 10.11.5 pre loaded with the latest Numbers, Keynote, iMovie, GarageBand etc applications.  Unfortunately after you run the Migration Wizard from a backup Time Machine to migrate the data from my previous iMac, apps like iMovie and GarageBand have returned back to older versions.  Please can someone tell me how I can get the latest versions that have been initially installed without having to pay for download on the App Store.  Thank you.

  Have you checked the App Store for updates? If you go to the App Store purchases tab, apps appear there? If so, try to download them again.

• App was rejected for the "missing rollback mechanism.

  I'm on my third conclusion with Apple for an multi-folio application. My second request has been approved, but it wouldn't let me add the app purchases. When I submitted the third time, it was rejected for "rollback mechanism missing."

  

  How can I fix this problem.

  Thank you!

  In my view, that he is an Enigma with app purchases. In order to get your app approved with App purchases you have approved in-app purchase article. If they don't approve the issue of the purchase it will not appear in the application; Therefore, the app will not display the option 'restore' in the settings drop-down list. If you don't have a restore option, you will not get approval. Also, if you have a restore option but no application to only purchases you can get rejected.

  You can contact technical support, they may have some tips here.

• My cc payment was rejected for the second time!

  my membership for this months payment was rejected once more! My Bank said that they have no problem with the card and I tried to use my card too and it works great... The problem is with afobe payment! What is the problem? Why is a simple payment so difficult and you don't even have other options to pay like amazon, paypal or debit card for my country... I am in the middle of a project, what I'm doing! It is is absurd... And the option to chat to communicate with you doesn't help seriously. Please tell me a solution

  Hello

  You will need to contact support by calling/chat for this request.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Kind regards

  Sheena

• How to open a project, I was working in the version of the Pr Pro 2014 in the 2015 version?

  I just upgraded to the new version of Pro 2015. I went to open my previous project, I was working on and can't find it. How can I open it? Or how can I go back to the old version so I can access it? It must be bad. Been working on it forever.

  Hi Jeremy,.

  I went to open my previous project, I was working on and can't find it. How can I open it?

  You are looking for on the homescreen? Have you tried to open the project to its original location? By default, your first Pro CC 2014 project file will be in Documents > Adobe > Premiere Pro 8.0 >

  Or how can I go back to the old version so I can access it? It must be bad. Been working on it forever.

  Here's how you can install the CC 2014 version: download and install Adobe Creative Cloud applications

  Thank you

  Regalo

• Creative Cloud applications can open all the versions of the CS files?

  Hello

  My apologies if this question is answered elsewhere.  I am considering a subscription to CC for either InDesign only or the entire suite.  Can someone please confirm if CC applications can only open files from some earlier versions and if so, which?

  Any help is greatly appreciated.

  Thank you

  Paul

  The ID should be able to open just about any file to CS2, but you may lose some components, as for example the paths of clipping and manipulation of transparency have changed over the years. Same thing would be true for Illustrator - stuff can be expanded or render differently. PS files must be compatible with any version as long as they were saved with maximum compatibility settings.

  Mylenium

• My unique editing application was rejected because it is not an application according to Apple!

  Hello

  I recently presented a single publishing application in the iTunes App store, and it got denied because:

  ----------------------------------

  2.21

  
  

  Your app is before a whole book and so is not suitable for the App Store, as shown in the App Store Review Guidelines .

  
  

  Books should be submitted to the iBooks.

  ----------------------------------

  Maybe it is correct and should I submit as an iBook, but I wonder if others have this problem. I mean, what is anyway a simple editing but a document type? What is the determining factor?

  And if I don't go the route of the iBook, can I continue to use the tools DPS?

  Thanks in advance (and sorry if this has been discussed before)

  See you soon!

  
  

  It's actually a book, I'll have to look into iBooks.  Thanks for the reply!

• The application has been deployed previously versioned "V2.0."

  Hi am having this error when running my appication am in jdeveloper application 11.1.1.6.0, the worked fine the day before

  IntegratedWebLogicServer startup time: 34045 ms.[Running application  on Server Instance IntegratedWebLogicServer...] 
  
  IntegratedWebLogicServer started.
  [09:32:46 AM] ----  Deployment started.  ----
  [09:32:46 AM] Target platform is  (Weblogic 10.3).
  [09:32:46 AM] Retrieving existing application information
  [09:32:46 AM] Running dependency analysis...
  [09:32:46 AM] Deploying 3 profiles...
  [09:32:46 AM] Wrote MAR file to C:\Users\10017134\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\o.j2ee\drs\AutoGeneratedMar
  [09:32:49 AM] Wrote Web Application Module to C:\Users\10017134\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\o.j2ee\drs\ViewControllerWebApp.war
  [09:32:49 AM] Info: Namespace '/persdef' is mapped to deploy-target metadata-store-usage 'WebCenterFileMetadataStore' in adf-config.xml but no metadata from the namespace is included in the MAR.
  [09:32:49 AM] Info: Any customizations created while running the application will be written to 'C:\Users\10017134\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\o.mds.dt\adrs\\AutoGeneratedMar\mds_adrs_writedir'.
  [09:32:49 AM] Wrote Enterprise Application Module to C:\Users\10017134\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\o.j2ee\drs
  [09:32:49 AM] Deploying Application...
  <16 Apr 2013 9:32:49 AM> <Error> <Deployer> <BEA-149082> <You cannot deploy application 'j2ee-app' without version. The application was previously deployed with version 'V2.0'.> 
  <16 Apr 2013 9:32:49 AM> <Warning> <Deployer> <BEA-149124> <Failures were detected while initiating deploy task for application 'j2ee-app'. Error is: '[Deployer:149082]You cannot deploy application 'j2ee-app' without version. The application was previously deployed with version 'V2.0'.'> 
  [09:32:49 AM] ####  Deployment incomplete.  ####
  [09:32:49 AM] Remote deployment failed (oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer)
  #### Cannot run application  due to error deploying to IntegratedWebLogicServer.
  [Application  stopped and undeployed from Server Instance IntegratedWebLogicServer]
  
  i don't what to delete C:\Users\10017134\AppData\Roaming\JDeveloper\system11.1.1.6.38.61.92\DefaultDomain\servers\DefaultServer\logs\

  Edited by: adf009 2013/04/16 10:45

  Hello

  Check below link,

  Integrated WebLogic does not request Jdeveloper

  Nilum.

• Exception which checks if the Version of Oracle is Correct

  Hello
  
  I'm trying to put together a script and I would like the script to check what version of oracle is the instance of database / and then throw an exception if the script is run on the wrong version of Oracle.
  
  I try to use the nested loops, the 2nd loop contains the code that I want to run if the oracle version is correct and throws the exception if the Oracle version is incorrect. The columns of v$ database.flashback_on and v$ database.current_scn do not exist on Oracle 9.2, what I what I use to test the version mismatch against.
  
  So far, my script looks like:
  
  Set serveroutput on encapsulated format
  Set feedback off
  set linesize 150
  
  DECLARE
  ora_version VARCHAR2 (4);
  wrong_version EXCEPTION;
  BEGIN
  Select substr (version, 1, 4) in ora_version from v$ instance;
  IF ora_version! = "10.2'."
  THEN
  RAISE wrong_version;
  ON THE OTHER
  DECLARE
  TYPE t_db () IS RENDERING
  dflsh v$database.flashback_on%TYPE,
  dcscn v$database.current_scn%TYPE);
  v_db t_db;
  BEGIN
  Select decode(flashback_on,'YES','Yes','NO','No').
  current_scn
  IN v_db from v$ database;
  DBMS_OUTPUT. Put_line (' Flashback on: ' | v_db.dflsh);
  DBMS_OUTPUT. Put_line (' current SNA: ' | v_db.dcscn);
  END;
  END IF;
  EXCEPTION
  WHEN wrong_version
  THEN
  DBMS_OUTPUT. Put_line ("bad Version of Oracle, requires a 10.2!");
  END;
  /
  
  set linesize 80
  Set of feedback on
  Set serveroutput off
  
  And gives me these errors:
  
  END;
  *
  ERROR on line 27:
  ORA-06550: line 12, column 34:
  PLS-00302: component 'FLASHBACK_ON' must be declared.
  ORA-06550: line 11, column 12:
  PL/SQL: Ignored Element
  ORA-06550: line 17, column 17:
  PL/SQL: ORA-00904: "CURRENT_SCN": invalid identifier
  ORA-06550: line 16, column 3:
  PL/SQL: SQL statement ignored
  ORA-06550: line 19, column 67:
  PLS-00320: the declaration of the type of the expression is incomplete or incorrect
  ORA-06550: line 19, column 3:
  PL/SQL: Statement ignored
  ORA-06550: line 20, column 67:
  PLS-00320: the declaration of the type of the expression is incomplete or incorrect
  ORA-06550: line 20, column 3:
  PL/SQL: Statement ignored

  Your script doesn't compile in pre - 10 g-Oracle versions.
  You must use dynamic SQL statements to this end, e. g.

  DECLARE
     ora_version     VARCHAR2(4);
     wrong_version   EXCEPTION;
  BEGIN
     SELECT SUBSTR(VERSION, 1, 4)
       INTO ora_version
       FROM v$instance;
  
     IF ora_version != '10.2' THEN
        RAISE wrong_version;
     ELSE
        DECLARE
           TYPE t_db IS RECORD(
              dflsh   VARCHAR2(3),
              dcscn   NUMBER
           );
  
           v_db   t_db;
        BEGIN
           EXECUTE IMMEDIATE 'SELECT INITCAP(flashback_on), current_scn FROM v$database'
                        INTO v_db;
  
           DBMS_OUTPUT.PUT_LINE(' Flashback On : ' || v_db.dflsh);
           DBMS_OUTPUT.PUT_LINE(' Current SCN : ' || v_db.dcscn);
        END;
     END IF;
  EXCEPTION
     WHEN wrong_version THEN
        DBMS_OUTPUT.PUT_LINE('Wrong Version of Oracle, requires 10.2 !!!');
  END;
  /
  

  HTH, Urs

• [CS6] Download the version of the application in which the document was created

  Hi all

  Is there a way to get the version of the application in which the document was created?

  For example: I have a CS6 plugin in which I want to know if the current document has been initially created in CS3 or CS5 or so away.

  Any help will be much appreciated.

  Use IMetaDataAccess from IDocument.

• Applications created with the Application generator does not start. It was after that I allowed the update install patches. Now the Version is 12.0.1f3 (32 bit)

  Help! Do not know what happened... I left the patch install the updater f3.  Now, when I create an application, it appears on the task bar (Windows 7) for a few seconds, then goes.  I don't know where to begin to understand this.

  Thank you

  Rich

  It is on the same computer.  The PC has the standard COMPUTER stuff.  VIper and they handle most of the firewall settings (windows).  I have turned them all off before installing.  I think it was a matter of execution engine.  I have no time to fight with LabView, so I uninstalled all LabView!  Then I made a new installation of the DVD.  This works.  I never install a patch of NOR without a week of free time!  In others, ever!  Whenever I do it, it takes me at least a day to get my operating environment!  Thanks for your time.  It is appreciated.

  Best regards

  Rich