My C drive in its entirety. Out of 116 GB only 2.5 GB is free. The computer has become slow. How to increase the memory...

Similar Questions

• Local drive in 'my computer' has disappeared. How to restore?

  Local drive in 'my computer settings' icon has disappeared. How can I restore it?

  Try this:

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• I have a mac Pro 13 "model and its making funny nose and get hot around 11:00 area when she is facing you. sounds like wearing out but it happens only intermittently.

  I have a mac Pro 13 "model and its making funny nose and get hot around 11:00 area when she is facing you. sounds like wearing out but it happens only intermittently.

  The genius bar people are especially good to physical problems and power problems. MacBook Pro my son got in because he was behaving strangely, and I run diagnostic and written tests the error code.

  The genius powered on the MacBook, made a terrible face, picked up over his head and held the keyboard close to his ear. "You have bad fan!", he said. "And you have also run diagnostics and got an error code? What was this error code? »

  The error code has turned out to be basically "Bad fan".

  Your visit for assessment is free, guaranteed, or rear. If you decide to do the work, it's all fixed-price, no surprises.

• Why can't save my movie on my computer in its entirety in Movie Maker 2.6

  I made a slide show using the movie maker 2.6 and then I clicked Save Movie, after that it was completed I review then i and about three-quarters of the way, no pictures were on the recorded movie screen. The music was not serious as he played completely at the end... What is the problem? PI

  original title: why I can't record my movie on my computer in its entirety

  Hello

  What operating system is installed on your computer?

  I suggest that you disable the video filter and check if the problem persists:

  Solve problems with publishing a movie to your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-your-computer

  Reference: Video filters in Windows Movie Maker: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/video-filters-in-Windows-Movie-Maker-frequently-asked-questions

• My screen on windows shows 1/2, how do Imake, it shows in its entirety

  My screen on windows shows 1/2, how I do show in its entirety, I click on an icon on the right by mistake and my screen went 1/2?

  Hello

  I suggest you to visit these links and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows7/getting-the-best-display-on-your-monitor

  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-display-quality

  It will be useful.

• The standard games on my computer has been deleted and my hard drive went out is there a place I can download the standard games

  original title: games

  The standard games on my computer has been deleted and my hard drive went out is there a place I can download the standard games

  ---------------

• Hello, my parents computer came RAM volume0 has failed and not be able to start. We went and brought a new hard drive, and its always say the same thing. Any ideas?

  Hello, my parents computer came RAM volume0 has failed and not be able to start. We went and brought a new hard drive, and its always say the same thing. Any ideas?

  A message on the RAID 0 volume failed is a recognizable error message, but the news is not good.

  RAID, by its nature, requires 2 or more drives.  RAID = redundant Bay of independent (or inexpensive) disks

  RAID 0 is the worst of the different RAID choices.  It increases the performance of hard disk by spreading or striping, data on two disks so that he can read and write more quickly. Unfortunately, such a picture offers no protection of data - in fact, it increases the chances of loss of data since the failure of a disk in the array results in the loss of all data on both drives. RAID 0 configurations are standard on high-end and PCs graphics games and provide a performance gain measurable, albeit modest for games, graphics applications and other programs intense from the hard drive.

  In view of the foregoing, the best course of action for you and your parents is to take the computer to a local computer professional - not a type of place BigBoxStoreUSA or GeekSquad.

• Photosmart 130 for windows 7, had to install a new driver, now its photosmart 330. I followed the instructions but it will not print an image of the computer.

  Photosmart 130 for windows 7, had to install a new driver, now its photosmart 330. I followed the instructions but it will not print an image of the computer.

  There is no Windows 7 driver for your printer, BUT...

  HP provide instructions that should get your printer working at least... follow them to the letter...

  BTW, the printer MUST be connected through a USB cable...

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c01796821&LC=en&DLC=en&cc=us&product=75939&lang=en Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

• External USB hard drives lose its connection and work stoppages. __

  External USB hard drives lose its connection and work stoppages.

  History

   
  Windows 7 Ultimate - 64-bit
  I installed it on a HP Pavilion, OS, 64-bit, and I have this problem.
  People report that it does not occur with Windows 7 32 bit OS.

  Problem:
  Any brand of external hard drive USB (and other USB devices sometimes) lose its connection and stops working only when copying large files internal drive to external USB drives.
  The USB device may appear to work properly when Windows first starts, but later stops working (crashes computer) after the start of large files to copy. You must restart Windows for the USB is working again.
  This only occurs when you copy files large files to THE USB port, not on the internal drive. It happened when I synicing my IPhone with Itunes when it started the synchronization of music files.

  According to the suggestions I have:
  1) updated the BIOS from the websites of the manufacturers.
  (2) power management disabled on the USB hub for disks
  (3) ensure that the BIOS for Legacy USB is set to.  I don't have this option in the BIOS settings.
  (4) this is not a motherboard problem, it is located on three different MB that we use.
  Also tried three different USB drives and different cables.

  Because I tested with two different computers updated and USB drives, our opinion is that this problem indicates that the Windows 7 64-bit operating system.

  Someone knows a solution?

  Hi Jh6284,

  Thank you for posting.
  What is a version of Windows 7 RC or RTM?

  You can try to uninstall and reinstall the drivers for the USB ports in Device Manager.

  UNINSTALL ALL USB ENTRIES IN DEVICE MANAGER ASSOCIATES.

  1. click on START
  2. right click "Computer" and select "Properties".
  3. on the left side, click on Device Manager.
  4. expand the 'USB Bus controllers' category
  5. right click and uninstall all THE references listed
  6. restart your computer and check if it works.
   
  I suggest you go to the Web site of the manufacturer of your and try to install the latest drivers for the chipset. Make sure that install you in compatibility mode there is no driver for Windows 7 64 bit.

  Please go through the article below to install in compatibility mode.
  http://social.technet.Microsoft.com/forums/en-us/w7itproappcompat/thread/cdd894f8-1ee2-43e5-952b-d04c25779a7f

  Kind regards
  Technical support of Microsoft-yama.

• I have Adobe Photoshop elements 11 on my computer. I used a lot but recently my problem is that on the grid the photos show nothing... only an hourglass. If I double click on the photo then shows in its entirety. I did uninstall and reinstall the bu progr

  On the grid, my pictures show nothing that hourglasses! If I double click on an hourglass the slideshow perfectly in its entirety. It's very frustrating. I tried everything I could think and even uninstalling and reinstalling... still the same program; On a grid of photos imported, just a series of hourglasses!. I need help.

  catherinea7777 wrote:

  On the grid, my pictures show nothing that hourglasses! If I double click on an hourglass the slideshow perfectly in its entirety. It's very frustrating. I tried everything I could think and even uninstalling and reinstalling... still the same program; On a grid of photos imported, just a series of hourglasses!. I need help.

  See:

  Photoshop elements (PSE) knowledge base. : how the miniature correct hourglass (generic) in elements Organizer?

• Hi I had CS 5.5 Student edition (download no CD), but then the hard drive of my computer is dead. My computer has been "fixed", but was completely wiped out. I bought a new computer and want to download again - issue one - I can't find anywhere on the web

  Hi I had CS 5.5 Student edition (download no CD), but then the hard drive of my computer is dead. My computer has been "fixed", but was completely wiped out. I bought a new computer and want to download again - one question - I can't find a way to download the edition of students anywhere on the site, do I just download the normal edition? Two - question because my computer was wiped out how to uninstall / disable one I already downloaded? Because you get only 2 total downloads is that correct? I want to

  Please visit: https://helpx.adobe.com/creative-suite/kb/cs5-5-product-downloads.html

  Concerning

  Megha Rawat

• Check the table in its entirety for collision? How? AS 2.0

  Hello!

  I make a flash game with Actionscript 2.0 and that you have encountered a problem.

  I have this _root.bulletArray = [] statement that stores all my clips that have been created with attachMovieClip. I was able to store all the balls in the table because when I say that it trace the table I get the following text:

  _level0.bulletCopy39
  _level0.bulletCopy39, _level0.bulletCopy43
  _level0.bulletCopy39, _level0.bulletCopy43, _level0.bulletCopy47
  _level0.bulletCopy39, _level0.bulletCopy43, _level0.bulletCopy47, _level0.bulletCopy51
  _level0.bulletCopy39, _level0.bulletCopy43, _level0.bulletCopy47, _level0.bulletCopy51, 0.bulletCopy55 _level
  _level0.bulletCopy39, _level0.bulletCopy43, _level0.bulletCopy47, _level0.bulletCopy51, 0.bulletCopy55, _level0.bulletCopy59 _level
  _level0.bulletCopy39, _level0.bulletCopy43, _level0.bulletCopy47, _level0.bulletCopy51, 0.bulletCopy55, _level0.bulletCopy59, _level0.bulletCopy63 _level

  and etc...

  But how to detecting the collision with ALL the balls?

  I have a movieclip that bears the name of the instance: enemy

  I wrote the following:

  If (_root.bulletArray.HitTest (_root. Enemy))

  {

  trace ("hit")

  }

  It dosent work, notihing is traced in the command thing.

  But if I do the following:

  if(_root.bulletArray[1].) HitTest (_root. Enemy))

  {

  trace ("hit")

  }

  then it will detect the collision, but only of this ball, not the range of the bullets.

  Any help is very appreciated! = D

  -NOTE-

  I also tried the followign without success:

  If (_root.bulletArray [1,2,3,4,5,6,7,8,9,10]. HitTest (_root. Enemy))

  {

  trace ("hit")

  }

  You must use a loop to go through the element of a table in its entirety at a time...

  for (i =; I

  If (_root.bulletArray [i]. HitTest (_root. Enemy))

  {

  trace ("hit")

  }

  }

• When I click on 'Write' composing an email in Thunderbird, empty e-mail fills the computer screen in its entirety. How to open upward more small yet? Thank you.

  When I click on 'Write' composing an email in Thunderbird, empty e-mail fills the computer screen in its entirety. How to open upward more small yet? Thank you.

  Double-click the windows position? the forest on the X to close the window on this subject.

• Drive hard sudenly started making noise beeps from scrathing and emits a sound at the same time?

  I was using my computer, looking at the pictures I got there with my camera and I had to get something up and closed the lid of my laptop. My Hd has started making a funny kind of like an alarm beeps scrathing, as the rally mixxed fast code rhythm to the sound of a fax machine. I turned it off, tried to restart always sound said I had to reinstall the hard disk and I tried a recovery and recovery disc windows can't find anything, this hard drive information is invaluable because it contains an amout of my web development, php, the GFX and work programming work. I have stored backups every month and online with carbonite, but here there are 3 weeks and the information currently on a project I was working on was more recent. I would like to know if there is a way to fixxing this problem or if I'm just F'ed and had to start over on 3 weeks of work?

  Just in case I'm done I have a few other drives I bought I can pass in and out. but I don't have a working computer in which I can make the ISO or burn DVDs to other 3rd party software, so if there is another problem I would appreciate it.

  This could be the click of death. Click here for more information and to see if it sounds like your problem

  http://www.TechwareLabs.com/community/showthread.php?p=71251

  It is possible to work for a short time by placing it in the freezer. For more information watch this 11 minute video in.

  http://Channel9.msdn.com/shows/the-defrag-show/defrag-ejecting-USB-devices-game-stopping-Windows-button-getting-mkv-file-thumbnails

  There are companies that can recover data from defective discs for a price.

  http://services.Seagate.com/index.aspx

• No digital noise will come out, only analog HD is heard through the speakers

  No sound from digital driver.  Although it seems to work normally, no sound is coming through analog plugs connected to the speakers at the back.  Should I change the GET connection__or one cable that converts analog versa__ pilootes or vice

  2 drivers high definition digital audio: NVIDIA and REALTek.  1 realtek audio of high definition.  They work normally, but internally because no digital noise will come out.  Only high definition analog sounds through the speakers.  The rear panel of the NVIDEA GeForce 8400 Gs system does not catch digital or taken to the sound system.  There are 6 analog for normal sound system.  Not digital.  I have optimized pc and digital audio and digital experience.  Should I buy some kind of jacks or cable analog-to-digital converters or another pile of sound cards just to get digital Pug face now in the speakers.  Help, please

  If I remember correctly, you have run in a common misconception.

  There is no plugins audo on the Nvidia card, nor on ATI cards, instead, they send sound to your analog "sound out" devices (which are paradoxically digital).

  And for reasons to ask: what color is taking you connected (both of em)?