my card reader cannot read SDHC cards

Similar Questions

• Computer laptop Gateway with Windows Vista cannot read SDHC cards.

  I have a TI PCIxx12 CardBus Controller.  It will read SD cards but not SDHC cards.  I can find solutions for Windows XP but not VISTA.  All the solutions to this problem?

  On Wednesday, February 8, 2012 03:21:05 + 0000, tlhutto wrote:

  I have a TI PCIxx12 CardBus Controller.  It will read SD cards but not SDHC cards.  I can find solutions for Windows XP but not VISTA.  All the solutions to this problem?

  Yes. Buy a reader able to read SDHC cards. You can buy them very
  low cost;  for example, on Amazon.com, you can find one for $2.50
  US.

  I have two of them I bought from Amazon: one that I keep on my
  Office and another that I keep in my case of laptop for use when traveling.

  Ken Blake, Microsoft MVP

• Windows XP will not read sdhc memory

  How is my windows xp it will not read sdhc memory?

  How my windows xp read the sdhc memory card?

  See the following article:

  (934428) hotfix for Windows XP that
  Adds support for SDHC cards that have
  a capacity of more than 4 GB
  http://support.Microsoft.com/kb/934428

  If the hotfix does not fix the problem... it is possible that your
  media player is not compatible with the SDHC technology.
  Best perhaps is to buy an external drive that is SDHC
  compatible or download to the device using a USB cable.

• Memory card reader cannot read SDHC cards.

  HP m8120n memory card reader apparently cannot handle the SDHC cards, or it is possible that he can't because I changed from Vista to Windows 7.  Where can I find the proper drivers?

  A driver will not solve this problem. It would require an update of the firmware, but depending on the age of your system, which will not happen. I know this isn't what you want to hear, but buy an external USB card reader to solve your problem.

  Frank

• HP2101i with Windows 7 Home Premium cannot read SDHC card

  I have connected a VR Olympus-379 with photos on a 8 GB SDHC card with a USB port on my HP, and the following message is displayed in the desktop monitor: 'the situation is not available', and inside the box is a big X and the statement 'Q; ------is not accessible. Access is denied. "It does not recognize the connection. It only shows the DVD drive as the only device with removable storage. The same thing happens with my system Toshiba laptop C655 64-bit of Windows operation. How to do one or the other to read the card, so I can see/save photos.

  I just want you to know that the problem is solved. The SD reader was an old I knew couldn't read a map HC. Thank you for your kind cooperation.

• Is Satellite A300 - 1 5 read SDHC class 6/4 cards?

  Satellite A300 - 1 5 supports class 6/4 SDHC memory cards?

  I tried to search it on the internet and in the user manual and specifies the SD but not SDHC cards.
  Also, I read the other satellite A300 on SDHC answers saying that it can be read.

  He also read my model?

  Hi dude

  Satellite A300 - 1 5 series supports type maps:
  -SD Card - 8MB - 2GB
  -SDHC - 4 GB - 16 GB card
  -photo - 16 MB - 2 GB xD card
  -Memory Stick - 8MB - 256MB
  -Memory Stick Pro - 256 MB - 2 GB
  -MultiMediaCard - 8MB - 2GB
  -miniSD (with adapter) - 32 MB - 2 GB
  -microSD (with adapter) - 512 MB - 4 GB
  -Memory Stick Pro Duo(with adapter) - 256 MB - 4 GB

  As you can see that there is no limitation in the type of SDHC card, but in the size of the map.
  Hope this helps you.

• Satellite M110 PSMBOA - it reads SDHC 8 GB or 16 GB cards

  Does anyone know if this model with Windows XP home SP3 can read especially SDHC card 8 GB or 16 GB SD cards?

  Or did someone knows if there is an update to the driver or firmwire that will allow this player to card read these types of cards

  Thank you

  Hello

  That means the user manual says?
  Did you check that?

  For me, it looks like the Australian series for Toshiba laptop.
  I looked in the manual that I ve found on the Australian Toshiba page and it says that these cards are supported:

  * SD * 8 MB, 16 MB, 32 MB, 64 MB, 128 MB, 256 MB, 512 MB, 1 GB, 2 GB
  * MMC * 8 MB, 16 MB, 32 MB, 64 MB, 128 MB, 256 MB, 512 MB, 1 GB
  * MS * 8 MB, 16 MB, 32 MB, 64 MB, 128 MB
  * MS Pro * 256 MB, 512 MB, 1 GB, 2 GB, 4 GB
  * xD * 16 MB, 32 MB, 64 MB, 128 MB, 256 MB, 512 MB, 1 GB, 2 GB

  As you can see SDHC cards are NOT supported.

• SD card reader to read SDHC cards

  I have my camera SDHC card but can ' t get my computer to read it, the drive on the computer is a MMC card / SD player, which can make. "

  Or install this

  It can fix it if the drive supports SDHC cards

• Pouvez Satellite 2450-114 read SDHC with the latest drivers?

  Hello
  Do you know if the Satellite 2450-114 windows XP home supports playback of the SDHC with the latest drivers and the maximum capacity supported?

  Thank you

  Yann

  Hello

  Satellite 2450-114 is a former, and in my opinion, it would not support the SDHC card using even the latest drivers why?
  Because the card holder is not in the software/driver, but this is a simple physical limitation (card reader)

  So I suggest to use an external USB card reader these drives are cheap and easy to use

  Welcome them

• SD reader SDHC compatibility issue

  I can't get my SD reader to read my SDHC 4 GB SanDisk memory card

  I can't get my SD reader to read my SDHC 4 GB SanDisk memory card

  =========================================
  The SDHC technology is different and it is possible that your media
  Player is simply not compatible.

  There might be an update available on the media player support
  site or on the site of the manufacturer of the computer support.

  More than likely your best bet would be to download the camera
  via USB cable or purchase a media player that is fully compatible
  with SDHC.

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Satellite L40 - cannot read with Windows XP SDHC cards?

  Hello

  last year, I bought a Satellite L40 series and a Windows Vista has been installed on it. I found that everything worked properly.

  Since then, I found that Windows Vista is slower than XP, I upgraded to Windows XP and I installed all the drivers manually. Everything works fine until I found that I can read only SD card with the Ricoh card reader on my laptop. With Windows Vista, he could read SD and SDHC.

  Like all of my files saved to the SDHC, I really want to solve this issue.

  I detected on the computer that is my card reader equipment:

  Ricoh Memory Stick Host controller (1.0.2.5)
  Ricoh MMC Host COntroller (1.0.0.9)
  Ricoh XD-Picture Card Host Controller (1.00.02.08 / 6.0.1.13)

  The questions are:
  1. the drive to read SDHC card with the Windows XP platform?
  2. If Yes, what should I do with it? Maybe I need to install a new driver? (If Yes, where can I find it?)

  Thank you for your concern. I'm really happy if you can help me solve this issue.

  Best regards
  Jenny

  Hello

  You may notice yellow exclamation in Device Manager?

  Normally, the Satellite L40 can read SDHC cards up to 8 GB so my question is have you tried different brands of SDHC cards?
  I have good experiences with Kingston and SanDisk cards.

  In addition, you should check the Web from Toshiba site for an update of the card reader:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Last but not least you have installed all the Service Packs and updates for Windows?

• SD card reader cannot read a 4 GB SDHC card.

  I have a gateway MT6451. I've updated the driver. Seems to be a Vista issue. He reads the card if I have it in a device, so I know that the card is good. The drive works because he recognizes a 2 GB SD card.

  SD card reader will not read a 4 GB SDHC card, help please.

  Hello

  Check with the gateway as this card reader isn't able to read SDHC format cards.

  I hope this helps.

  Rob Brown - MS MVP: Bike - Mark Twain said it right.

• SDHC card freezes computer when it is placed in a SD reader, running Vista

  I bought a Sandisk SDHC 4G card for my phone. When I try to open the map it freezes the computer window. If I try to start windows with the card in it does not work. Is it possible for me to update my also computers SD card reader to read SDHC?

  Hi Shawn520,

  Check out the info below and a link to the HP Web site with detailed information about readers SD and SDHC cards:

  "Many models of PC card readers do not work with the formats 'high capacity'. For example, a memory card reader capable of reading a card Secure Digital (SD) 1 GB cannot read a SDHC 16 GB card. »

  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=bph07910

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Satellite Pro A120 - 160 SD compatible SDHC card reader?

  I just want to know if my in my PSAC1E SD card reader can read SDHC cards or not. Someone out there of Toshiba knows, or has someone else out there with the macine even tried a SDHC card in his?

  As far as I know that the Satellite A120 supports SD cards up to 1 GB.
  If SDHC cards are not compatible.

  If you want to read SDHC cards on your laptop, you need an external (USB) card reader.

• my SD card reader allows to use an SDHC card?

  I have a desktop PC HP Pavilion p7-1414 can my use of SD card, SDHC card reader? I have Windows 8 64-bit operating system comes with my computer.

  Yes, the HP p7-1414 computer should be able to read SDHC cards.

  Please send Bravo