HP2101i with Windows 7 Home Premium cannot read SDHC card

Similar Questions

• I have a PC with windows 7 Home Premium installed. The PC is faulty and cannot be resolved. Can I reinstall the same Windows 7 to a new computer without additional cost?

  I have a PC with windows 7 Home Premium installed. The PC is faulty and cannot be resolved. Can I reinstall the same Windows 7 to a new computer without additional cost? If yes how can I do this? Some people reported issues license keys and it cannot be registered once in a PC.

  Thank you

  It is the major limitation of the OEM software that it can be installed on a PC. The COA label will confirm whether the license is OEM. A number of elements can be replaced in a PC in the way of repair, but only if exactly the same model of Council can this be exchanged.

  Even if you transfer the drive to the new PC would not authenticate because of the change of equipment, and it would be unlikely to to re-authenticate online.

  If the label is not OEM and you have a retail package, so it can be transferred.

• H9-1150 Pavilion: H9-1150 PC does not start with WIndows 7 Home Premium 64-bit with ASUS 960 GTX card.

  I've seen others have posted simular questions, but I thought id repost this even in the case where there is more help.  I have the Elite Phönix Pavalion h9-1150 desktop with Windows 7 Home premium 64-bit.  and the bios HP 7.07 (seems no possible to upgrade the bios).

  As others have had I install the new graphics card, the 960 Asus GTX card that came out last month and the system start gives about 3 beeps in about 30 seconds and then it goes to a screen that is black with a blinking cursor and nothing else happens. cannot enter bios or settings for HP...

  I tried to disable UEFI boot devices in bios settings and enable only the legacy devices (after him swinging back on my original card, then move on to the new card), but it still gives 3 beeps after the start.   However, I was able to get into windows. Although I think that this may be due to turn off the computer with the old card in without power first. and after 3 beeps (which always blocks you on the bios menu) sometimes it appears the window where you can select the safe mode or normal mode... as sometimes happens if you start your computer with windows 7 If you had just it off without turning off power or something.  There, I can get into windows and run the PC and graphics card without problem, it's just when I try to start the problem happens.

  and suppor HP no. is NOT a fault of the card itself. As much before. I bought an EVGA card earlier a GTX 780 and SAME problem happened (although I have not tried to remove it then devices boot UEFI)...

  There is a problem of spacific with HP computers that seem to lock 'new' start-up equipment.

  Honestly not be blunted. I really think it's bad what I read somewhere that even if HP would never say it they do it on purpose to prevent people ruin of guarantee or any "liabity' that occur by people any other hardware on HP computers inventory installation

  makes no since to me.  the PC SHOULD be able to run the card. in fact his race he now once I was able to circumvent the blocking (temporarily) check markers, everyhting is fine tracks of card 3 times faster then old (that should be the case).

  But it's just this block as HP for some reason any installed on their bios/cards mothers is the question.

  Good news is I got it from amazon and I have about a month, until I return. which I think this time I'll make.  to see if something pops up in a month or something.

  It's the ONLY solution, it seems that HP has officially to deactivate start secure Windows 8

  but this isn't a computer of windows 8. and I guess even if install windows 8. the issue wouldn't disappear because given that its an older bios, there is no way to have a secure boot option to delete?

  HP you really need to get on the ball and give us a straight answer on this subject.  Is it ALL WAY to solve this problem? Can you not just do an older BIOS update to allow this? Or do you simply not want to worry about old PCs?

  anyway I think that it is wrong and very frustrating and to be honest. If this is the case when my pc otherwise MUST run on demand

  It's a PCI express 16 x slot card that is 3.0

  Here are the specifications of deetailed according to the guidelines of your page

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=c03273835

  the card SHOULD WORK fine.  I thought the GTX 780 was a little too much for the PC as he had more then a six pin port and needed a little more power, so at first I thought it was the question. so I returned it. and has now got this new card.

  However, the ASUS GTX 960 map requires the SAME power that the card GTX 550 it by default and the SAME SIX connector

  so it SHOULD work.

  and performance tests indicate that it FACT it's just stupid... bios that asks the question.

  I'm afraid to turn off the computer at the moment and try again to see if windows starts normally after you turn off the startup UEPI devvices because he cannot start properly...

  HP you are one of the largest suppliers of computers you know technology what are YOUR computers.  WHY cant you give us a direct awnser on this.

  ITS VERY frustrating

  and to be honest if I can't solve this problem, I am very hestient never buy another product HP if their spacifically computers have this new method of hardware locking.

  because I have the card now works on my pc, it runs great! 3 times as fast as it should! and yet, I know in the back of my mind, if I can't understand this bad likely issue just to send it back... less I have time.

  and for now, I did not have money to buy a new pc. This PC is JUST perfect for what I need for now another card then you want a little better...

  He shoudnt be as much hassle there?

  Thank you.

  Hello

  You need update the BIOS that is listed under Windows 8 to support the new graphics.   You must upgrade to Windows 8 or temporarily install Windows 8, you can install the update to the BIOS.  While there may be other ways to install the BIOS update, clearly having Windows 8 running will be the safest way.  8 BIOS version is your best chance to get the latest graphics cards to work.

  You can Windows 8 Enterprise 90 days trial.

  If you decide to install W8, then create external recovery HP Media and backup your data before doing anything.

  The reality is that there is no guarantee that any particular graphics card will work in any particular PC, even if the graphics card works in other PC or even the same or similar model PCs. Know what the return policy is before you buy.

• Windows 7 Home Premium cannot map NAS / network storage drives

  Hi, I'm currently on a PC Windows 7 Home Premium and I have two 2 NAS drives.

  I am running a Buffalo Linkstation (old version) and a new Iomega Home Media Network Hard drive.

  Initially I thought it was just my Linkstation from Buffalo who is older and has had no updates of the firmware that cannot be mapped as a network drive. But I just got my new Iomega hard drive today and installed the latest firmware and software. The Iomega software detects the drive and all of its shared folders but the problem is that I can not map any shared folders as a network drive, making it useless on my Windows 7 computer.

  I can access both NAS drives on my windows xp pro machine very well.

  I got off the phone with Iomega technical support and they said that it is a well known problem with Windows 7 Home Premium and readers of Samba. Is there someone out there who can give me a solution? I already tried the fix LMCOMPATIBILITYLEVEL on other forums I found by changing the values 1 or 2 - but still no luck.

  It gives me an error of network even when I try to connect to the ip address of the NAS, however - it appears on my network but I can not access or map!

  I really want to get my readers network running on windows 7 Home Edition premium without having to upgrade to other users are still having problems, I read. It's a little pathetic I can't even map a network drive on my pc.

  I had exactly the same problem with my drive hard Lacie network. If your drive contained donkey type of media, music, or video, Win 7 use the reader as a "Windows Media Connect" device, opening the disk in Media Player, showing only media files...

  This prevents access to all ot0her of the player records.

  However, I found that it is possible to add the drive as a network drive, if you know the name of the root folder.

  In my case, it's "openshare", so when you enter the path to network drive, I use \\192.168.xxx.xxx\openshare, and it allows me to access the drive...

  Why Microsoft chose to make this type of access to the files of so difficult to get simple network, just blows my mind, knowing that WinXP has it done easily...

  I hope you were able to understand my English, and that this could be useful.

  Kind regards

• I am trying to install updates in my desktop computer. Its a HP w1907, with windows vista home premium. Error code 80070005.

  I am trying to install updates in my desktop computer. Its a HP w1907, with windows vista home premium. Have you downloaded "accesschk,' help the thing 'command prompt', but still not of chance?

  original title: error code 80070005

  Help us help you: start by reading this post 'sticky '...

  What information to post in the Windows Update forum
      http://answers.Microsoft.com/thread/1467f44b-ee27-4F7D-98d7-f1c4b35b3395

• Error code 37. I have a model CM5688E gateway with Windows Vista Home Premium. My Optiarc DVD RW AD - 7203 has enough work. How to operate again give idea? The computer is less than 2 years.

  Error code 37. I have a model CM5688 E gateway with Windows Vista Home Premium.  My Optiarc DVD RW AD - 7203 has left a couple of weeks of work.  Anyone have an idea how I can get it working again?

  Hi Sunday47,

  There are many causes of Code 39 errors:

  ·         A required device driver is missing.

  ·         A required binary file is corrupted.

  ·         There is a problem with the file I/O process.

  ·         A driver that refers to an entry point in another binary file cannot load.

  I suggest you try the following steps:

  Step 1: Run the fixit available in the link below

   

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  If the problem persists,

  
  Step 2: Uninstall and reinstall the drivers.

   

  1. click on start and then click Control Panel.

  2. click on system and Maintenance, click System, and then click Device Manager.

  Note If Control Panel is in Classic view, double-click System and then click on Device Manager.

  3. If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  4. in Device Manager, expand CD-ROM/DVD-ROM drives, right click on the device CD and DVD and then click on uninstall.

  5. When you are prompted to confirm that you want to remove the device, click OK.

  6. restart the computer.

  After the computer restarts, the drivers will be installed automatically.

  Click here for more information.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 7 Home Premium cannot be updated (error 80070490)

  Hello

  I have a x 64 bit desktop with Windows 7 Home Premium installed.

  I had a moment to try to solve my problem with Windows Update is not be able to install or to look for new updates for months (ask the error code 80070490) and trying to fix it, have caused more problems that I can't fix.

  I have troubleshooted countless times, including the use of update Windows Diagnostic tool (that does not correct the problem of update). I also tried to reinstall Windows 7 Home Premium from the disc, I bought, only to be greeted with an error message containing: "your current version of Windows is more recent than the version that you are trying to level to.» Windows is unable to complete the upgrade. »

  So, I took a dagger blow to scouring the many issues on the Microsoft Answers community that are similar or identical to the problem I have. Some answers have led me to running the sfc/scannow command and also a command "findstr" who has given me a list of files that sfc/scannow could not fix. Some have been classified as "cannot repair" and some more serious labeled "can not reproject corrupted file. My next solution was that I should try to reinstall it from my Windows 7 disc, but try to solve the "current version" problem that prevented me to reinstall earlier. An answer I found in the Community said that SP1 needs to be uninstalled for the resettlement of work, so I uninstalled SP1 and rebooted my computer. I tried to reinstall from my drive again and was greeted with the same error as before: "your current version of Windows is more recent than the version that you are trying to level to.» Windows is unable to complete the upgrade. »

  Now my problems include:

  • Windows cannot update or check for updates
  • There is I don't know how to fix corrupted files
  • SP1 is no longer on my computer and I can't reinstall it

  Thanks for any help. !

  Hi Bridget,

  Thanks for posting your query on the Microsoft Community.

  I understand that you are facing problems with Windows 7. Sorry for the inconvenience caused to you.

  The problem may occur if a file (CBS Manifest) that is needed to install updates is corrupt.

  I suggest you refer to the following Help article Microsoft next and check if it helps.

  http://Windows.Microsoft.com/en-GB/Windows/Windows-Update-error-80070490#1TC=Windows-7

  It will be useful. Get back to us if you need further assistance on related issues of Windows and we will be happy to help you.

  Thank you.

• Cisco VPN Client with Windows 7 Home Premium 64-bit

  I recently bought a new laptop with Windows 7 Home Premium 64-bit.   I need to connect to a VPN IPSEC to work.  I tried the current VPN client and after reading the posts in this group, I tried vpnclient-win-msi-5.0.07.0240-k9-BETA.exe.  When I tried to install the beta version, I get the following error message:

  Error 28011: Windows 64-bit is not supported by Cisco Systems VPN Client 5.0.07.0240.

  Any suggestion would be appreciated.

  Hello

  You should download the 64-bit version. vpnclient-winx64-MSI-5.0.07.0240-K9-Beta.exe is the version you tried to install the 32-bit version

  Thank you

  John

• lovely better does not work with windows vista home Premium what another program removes LSO and HOW to prevent the trackers?

  Question
  better privacy does not work with windows vista home Premium that another program removes LSO and HOW to prevent the trackers? Edit
  Details

  In current versions of Flash you can also do this via the control panel.

  • Control Panel > Flash Player, click on remove and erase data

• Qosmio X 500 - 10W: old software with Windows 7 Home Premium

  Hello

  First excuse my bad English, I'm french.

  A month ago, I bought an X 500 - 10W.

  I would like to re - install two old games that turned on my satellite M30-104 with windows Xp.

  I just can not install those on the Qosmio that works with Windows 7 Home Premium 64-bit, even if I use the compatibility mode.

  Is there a way to make these ancient works of software?

  I found the virtual computer (for windows Xp mode), but it only works with Windows 7 Pro or Ultimate.

  Thanks for your replies.

  This with virtual PC is good idea and you should get the right version.
  I mean if you have games that are designed for Windows XP Home edition, then you know that this will not work on the new operating system to Win7.

  Best application virtualization for me without a doubt is VMware Workstation > http://www.vmware.com/

• came loaded with Windows Vista Home Premium. Recently, I reformatted the hard drive and did a clean installation of Windows 7 Professional. I have no games. No solitaire, Minesweeper, no nothing.

  original title: lack of games
  I have an Acer Aspire PC. It came loaded with Windows Vista Home Premium. Recently, I reformatted the hard drive and did a clean installation of Windows 7 Professional.

  I have no games. No solitaire, Minesweeper, no nothing.
  How can I, without seeking to erase and reinstall again?

  To activate the built-in Windows 7 games:

  1. click on Start (lower-left) and then on Control Panel.

  2. click on programs and features.

  3. on the left side of the screen, click on 'Windows turn features on or off".

  4. find the entry called games & check the box next to it.

  5. click on OK.

  6 reset.

  If the games box is already checked, uncheck the box , click OK, restart, then do steps 1-6 above.

• What external optical drives are compatible with the Acer Aspire One with Windows 7 Home Premium 722

  What external optical drives are compatible with the Acer Aspire One 722 with Windows 7 Home Premium OS.  I need to make the backup disks and install the CD software.

  Thank you.

  More external ODD will work just make sure it's an external power source. This allows not to take a lot of power to the unit.

• Can I install Office 365 in a PC with Windows Vista Home premium

  Can I install Office 365 in a PC with Windows Vista Home premium

  No, you do not have Windows 7 or newer.  Windows Vista lost all support and compatibility years.

• I put a password for my computer with Windows Vista Home Premium and now I forgot the password and can not even enter the computer now. Is it all the same retrieve this password or what is the next step to use the computer again? __

  I put a password for my computer with Windows Vista Home Premium and now I forgot the password and can not even enter the computer now.  Is anyway to recover this password or what is the next step to use the computer again?

  Hello WillieBouma1,

  You can try this to http://www.wikihow.com/Reset-a-Windows-Vista-Password that will help you with your password (typed in) problem easily. Here is one link: http://www.youtube.com/results?search_query=trinity+rescue+kit&search_type=&aq=f for video detail to achieve this, if you have any problems. I used it a dozen times and it really works! Hope this helps you. Let us know anyway. Make it a great day!

  "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

• my laptop hp dv5 with windows vista home premium series starts do not

  my laptop hp dv5 series with windows vista home premium not starting not, despite several presses of the power button that only a white screen appeared only to nd 2-3 seconds then the system crashes.all started last night, when the electrical connection cut (no battery attached to the laptop). in the morning when I tried to start it, the led light of the charger pin on the beds for laptop for about 6-7 seconds nd then turns off. When I pressed the power button with the connected charger pin, it does not start, BUT when I joined the battery wid, the light (power) led to turn it on mobile to the top but the led on the pin of the charger turns off after a few seconds. SA is NOT SHOWING anything on the SCREEN EVEN AFTER PRESIN F11 etc please help

  Hello

  Power outages often lead to problems of material with computers / laptops.

  If there's nothing on the start screen (HP Logo, etc.) at startup, you may have a hardware problem.

  If under warranty contact HP.

  If this isn't the case, under services, contact a repair shop, local.

  See you soon.