my computer does not prompt its showing error "the command prompt has been disabled by the administrator".

Similar Questions

• my command prompt has been disabled by the administrator

  I want to fix this problem.

  Message: "the command prompt has been disabled by your administrator".

  When you try to run CMD.exe or a batch file, you may receive the message "that the command prompt has been disabled by your administrator ". This is caused by the restrictions placed on the registry. DisableCMD value is set to 1 or via Group Policy. To enable the Task Manager, try one of these methods:

  Method 1: Use the console Registry tool

  • Click Start, run and type this command exactly as shown below: (best - copy and paste)

  Tracking Add HKCU\Software\Policies\Microsoft\Windows\System v DisableCMD /t REG_DWORD 0 f d

  Method 2: Modify the registry directly

  • Open the Publisher of the registry (Regedit.exe) and navigate to:

  [HKEY_CURRENT_USER\Software\Policies\Microsoft\Windows\System]

  • In the right pane, double-click DisableCMD and set its data to 0

  Method 3: Use the Group Policy Editor in Windows XP Professional.

  • Click Start, run, type gpedit.msc and click OK.

  • Navigate to User Configuration-Administrative Templates-System

  • Double-click the prevent access to the command prompt

  You can then disable or set the not configured policy. Disabling or setting this policy unconfigured should solve the problem.

  If you face any problem, let me know.

  K M JAI Support general (INDIA)

• Error Task Manager has been disabled by your administrator

  Original title; Unable to start the Task Manager

  I'll try to find the 'task manager', but every time I try to launch it I get an error message "Manager tasks has been disabled by your administrator". I am the administrator! How can I get the Task Manager to work? Thank you

  Hi Nigel,

  1. Since when are you facing the issue?

  2 have you logged on a domain?

  3. do you have a security program installed on the computer?

  4 did you a recent software or changes to the material on the computer?

  Method 1:

  I suggest you to run a full scan using the Microsoft Safety Scanner and check.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: there is a risk of data loss if all the files are infected and which can be removed in the cleaning process.

  Method 2:

  If the problem persists, you can start the computer in safe mode and perform a clean boot.

  Step 1:

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:

  This could happen if one of the substantive programmes is in conflict with the proper functioning of your computer. To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7 http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7, mentioned in the article to start the computer to a normal startup.

  Hope this helps and keep us posted.

• computer does not boot, blue screen with the message: Stop: 0 x 00000024 (0 x 00190203, 0 X 86949258, 0xC0000102, 0x00000000)

  computer does not boot, blue screen with the message: Stop: 0 x 00000024 (0 x 00190203, 0 X 86949258, 0xC0000102, 0x00000000)

  Hello

  1 how long have you been faced with this problem?
  2. don't you make changes on the computer before this problem?

  Start the computer by using the Microsoft Windows XP recovery console, and then perform a check disk on the file system.

  To do this, follow these steps:

  1. Insert the Windows XP CD in the CD-ROM or DVD - ROM drive, and then restart the computer. Select the required options to start the computer from the CD-ROM or DVD - ROM drive if you are prompted to do so.
  2. once the Welcome to Setup screen appears, press R to start the Recovery Console.
  3. If your computer is configured to dual-boot or multiple boot, select the appropriate installation of Windows XP.
  4. When you are prompted to do so, type the administrator password and press ENTER. NOTE: In Windows XP Home Edition, the administrator password is blank by default.
  5. at the command prompt, type the following command and press ENTER: cd system32
  6. type the following command and press ENTER: chkdsk /r /p
  7. remove the Windows XP CD in the disc drive.
  8. Type exit to restart your computer.

  Important: Running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area if all available on which data may be lost

• I have Windows 7, my computer does not start. I did the Startup Repair and he won't fix it. I did the system configuration information

  I have Windows 7, my computer does not start. I did the Startup Repair and he won't fix it. I did the system configuration information. and that did not help. What to do now? The comment of Bios makes me fear that it could damage my computer forever. What should do? Help, please

  Hi Alan,

  Thanks for posting your query in Microsoft Community.

  I understand that the computer does not restart even after running Startup Repair and I will be happy to answer your query. I appreciate the efforts made to try to make it work. Let me ask you;

  • How do you run the Startup Repair?
  • Do you have Windows 7 repair disc?
  • Remember to no particular change in the computer before the show?
  • Have you plugged an external equipment, except the keyboard and mouse?
  • You are able to start the computer in safe mode?
  • What is the brand and model of the computer?

  Note: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  There could be several reasons why he's not leaving including hardware as well. In addition, it could be because the master boot record (MBR) has been damaged. When you try to use the Startup Repair tool to repair the MBR, the Startup Repair tool indicates that no problem was found or it does not work yet.

  If you have any connected USB flash drive or other external devices connected to the computer, if you please, remove them and try to run the Startup Repair tool.

  If you haven't tried using Windows 7 repair disc, you can try the following:

  1. Insert the Windows 7 disc
  2. restart your computer
  3. When asked if you want to boot from your DVD player, do it.
  4. Select your language, click Next.
  5. click on repair your computer
  6. Select the operating system you want to repair.

  You can also perform the system restore by selecting the restore point when you think it worked very well. System Restore, choose advanced options using the disc.

  Important: When you use system restore to restore the computer to a previous state, the programs and updates that you have installed after this date are deleted.

  I also recommend to contact the computer manufacturer to get the done diagnostic equipment.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Stay in white adjustment layer and does not apply its effects to the video overlay?

  Stay in white adjustment layer and does not apply its effects to the video overlay?

  I used color correction adjustment layers and now my adjustment layer is just stay white and I watched so many forums and I can't find what I'm doing wrong...

  I have reset my preferences, I did a new project that I am naïve.

  

  It's After Effects but... Try opening the composition window (TAB)

  You are looking at the AL in the film window.

• The Task Manager does not start. I get a message "task manager has been disabled by your administrator".

  Original title: I deleted a virus from my computer but the Task Manager does not start.  I get a message "task manager has been disabled by your administrator".  Can someone tell me how to fix this.

  Task Manager

  Too bad!  I thought about it.  It has been disabled in the registry.

• Send a message that the computer does not shut down properly after the resumption he out of the hibernation mode.

  My laptop has Windows Vista and is about 3 years old.  It is in excellent shape, but recently it has been brought to my attention that whenever I put into hibernation mode and resume, I receive a message that indicates that the system or computer is not stopped correctly, and so I have to restart the computer.   Why is this happening? and any solution for this?   Thank you in advance.

  Hi SuzanneSchwester,

  Thanks for posting your query in Microsoft Communities. It seems that you are getting a message that the computer is not shut down properly after the resumption he out of the hibernation mode. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         What is the brand and model of the computer?

  Follow the steps in the article.

  You have problems after you resume Windows Vista from sleep or Hibernate computer

  You can see these articles for more information:

  Solve power problems

  Turn off a computer: frequently asked questions

  I hope this helps. Let us know if you need more assistance.

  Thank you.

• computer does not recognize a dvd in the drive

  Hello

  My computer does not recognize the presence of a dvd in one of my two drives, although she acknowledges a CD.  This happens regardless of what dvd I insert.

  Thank you very much

  PAM

  Try this;  Restart your computer before trying again the disc that plays on your DVD player.  If this does not work then there is only one possibility;  your DVD drive is DEAD and you need to replace it, or buy an external CD/DVD drive.    He comes to the end of the mystery.

• Cannot install the updates, receive error message: automatic updates has been disabled by the administrator, but I don't.

  Original title: How can I, as an administrator, turn on automatic updates, whenever I try, I get an error message saying that automatic updates has been disabled by the administrator.  I didn't do it, then?

  Question stands as is.

  Hello

   

  1. have you made any changes to the computer before the show?

  2. What antivirus application is installed on the computer?

  3. What are the different user accounts on the computer?

  This problem occurs if Windows Update has been disabled by one of the following settings:

  · Group Policy

  · System policy
  · Registry

  I suggest you follow these methods and check.

  Method 1: Perform the clean boot and try to install the updates.

  To do this, follow the steps in this link:

  http://support.Microsoft.com/kb/310353

  NOTE: Once you check the functionality, follow the suggestions under steps to configure Windows to use a Normal startup state.

   

  Method 2: Try to turn on the auto update by following the steps in the link below.

  How to configure automatic updates by using Group Policy or of registry settings

  http://support.Microsoft.com/kb/328010

  Registry warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756

  How to back up and restore the registry in Windows

   

  Method 3: Turn off the antivirus application and try to download the updates and check.

   

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

   

  Method 4: Perform a full scan of the computer using the following antivirus applications.

  Microsoft Safety Scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Malicious software removal tool: http://www.microsoft.com/security/pc-security/malware-removal.aspx

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

  I hope this helps!

• Error message: Wireless Communication has been disabled - HP OfficeJet 4620

  Hello

  I have a printer of HP OfficeJet 4620 network.

  All of a sudden the wireless light goes off, and whenever I try to turn it on by pressing the wireless button I get the followig message: "wireless communication has been disabled. Contact your network administrator or the person who set up the printer.

  If I try to access the network settings by going to the Setup Menu > network, I get the same exact error. I see it too if I try to print a network status page.

  I also tried to restore the default values, but that did not work.

  I am trying to find a way to reset it completely, but I can't find one way other than the default settings in the settings menu.

  Any help is appreciated.

  Hello

  Please check the Inbox you private message.

  Thank you!

• Computer does not turn off: encounter error on update Ms.

  It is a XP Pro laptop.  During the shutdown, while trying because of the updates, I get an error message "NDP1.1sp1 - KB2416447 - x 86 .exe has encountered a problem and had to close.  Computer then does not close.  How can I fix it?

  Remove the .net framework 1.1 Sp1 with .NET Framework Cleanup Tool :

  http://blogs.msdn.com/b/astebner/archive/2008/08/28/8904493.aspx

  install .net Framework 1.1 Sp1 again and install the update again.

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• "Your computer could not renew its address from the network (from the DHCP server) for the network card"?

  I saw this question posted several times here, but I can't find someone who has exactly the same problem I have.

  This problem started a week ago. Basically, my computer loses its connection ethernet once per hour to around the same exact time. which is only for about 5 seconds, but it's enough to get Skype and other things while I'm working, and it's very frustrating because I use Skype to talk with customers, and it looks unprofessional when my calls fall every single time. my computer can also use wireless (which does not go down), but he's too unstable for my work.

  now on the error message I posted. I get this error in my observer of events in about 30 minutes until my ethernet goes down, so I don't know if they are interlaced or not, because I don't get any errors when my ethernet really crashes.

  Here's what I've tried so far without success:

  -temporarily disable the firewall and antivirus

  -updated driver for both my wired network cards and wireless (both were UTD)

  I don't know what to do because I've never had this problem before.

  Here is some information on my computer if that helps all:

  OS: windows 7 Home premium (x 64-bit)

  computer model: gateway DX4870

  Look on the side of the router and make sure that the DHCP lease time has not set to 60 minutes.  As a simple solution you can just assign a reserved DHCP or a static address to the computer (in the router).

  PS: You'll find the DHCP lease on the map with the command ipconfig/all command at a command prompt

  John

• Computer does not start, it goes into the repair system or start windows normally.

  I restarted my computer because my internet is blocked, and when he went straight to the windows repair. I chose 'Launch startup repair', but that just black flashed then went back to the same screen. So I chose to start windows normally, and restarted, it went back to the same thing. It retains, even in safe mode, etc. It's a Lenovo X 200 tablet, I got to the end of 2007.

  If Safe Mode does not and you do not have a Vista DVD from Microsoft, do a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use it.

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner: http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  See you soon

  Mick Murphy - Microsoft partner

• error #5, illustrator does not open on mac 10.6 my Illustrator has been deposited into my hard drive, how to open it?

  my copy of professors of creative suite 5 was the illustrator software deposited in an external hard drive.

  I dropped this illustrator on my office file, but it does not open saying error 5.

  How can I open this Illustrator?

  If I have to re install the master of Creative full collection, do I trash the existing collection first, then

  Reinstall the complete collection?

  I just want to have illustrator of exploitation

  Thank you, howard

  Howard you'll want to install Illustrator not copy from one computer to the other.  Please removed what you copied and download a new copy of CS5 products downloadinstallation files.  If you need to locate your serial number recorded, it will be at http://www.adobe.com/.  You can find details on how to locate your serial number registered to quickly find your serial number.