My computer made several attempts to copy "chrome manifest" and I can't stop it

Similar Questions

• Computer crashes after attempting to copy in Excel and IE

  I hope this is the right forum, sorry if not.

  Try to copy, copy and paste something, my computer crashes. If I'm in excell it crashes if I'm in the Explorer, to stop and restart. It could just be a phrase, size is not serious...

  any thoughts?

  It is an Internet Explorer error, not Windows Explorer, caused by Skype.
  If you are looking for a mistake explore?
   
  In Internet Explorer click on Tools button on the toolbar - Manage Addons - Enable
  or disable Addons and find Slype in the list and choose disable. This
  Remove Skype toolbars and aid of IE.
   
  First test IE without any addins loaded: start - programs -.
  Accessories - Tools system - Internet Explorer (no Addons).
   
  Another thing to try is to start Excel in safe mode (without addins loaded). Type in
  Start - All Programs - Accessories - run and type
   
  Excel/s
   
  Download http://www.nirsoft.net/utils/shexview.html
  Disable all non-microsoft shell extensions (to explore) and reactivate a
  by so this can help.
   
  --
  ..
  --
  "acetoolguy" wrote in message news: e155b614-a948-4e38-bb82-c5e0ca5ddd50...
  > Problem event name: BEX
  >
  > Application name: iexplore.exe
  >
  > Application version: 8.0.6001.18943
  >
  > Application timestamp: 4c25813d
  >
  > Fault Module name: SkypeIEPlugin.dll_unloaded
  >
  > Fault Module Version: 0.0.0.0
  >
  > Module Timestamp error: 4a77e4da
  >
  > The exception offset: 06fa3f2b
  >
  > Exception code: c0000005
  >
  > Exception data: 00000008
  >
  > OS Version: 6.0.6002.2.2.0.768.3
  >
  > Locale ID: 1033
  >
  > Additional information about the problem
  >
  > Bucket ID: 1309165866
  >
  >
  >
  > Funny, copy/paste did work for it.
  >
   
   

• My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  My 5s iphone suddenly showed no service, then I made an attempt to update to ios and itunes connected, now iphone is not enable and display cannot connect to the server and in itunes it shows unable to check your device.please help me

  Assuming that you have a valid SIM card in the phone, it is more often symptomatic of a phone that has been hacked or jailbroken to unlock.

  Where do you have the phone first?

• my computer is the connection with a temporary profile and I can't access some files how to fix this?

  my computer is the signature with a temporary profile and I can't access any of my files how to fix this?

  Hello

  Please post in the forums for your version of Windows.

  Ask a question in a select Technical Forum here appropriate injector:

  Microsoft Community - Forums
  http://answers.Microsoft.com/en-us

  Please provide all the information we need to help us help you.

  How to ask a question
  http://support.Microsoft.com/kb/555375

  =================================

  These methods should help for Windows 7 or Vista.

  References to Vista also apply to Windows 7.

  You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. THE ADMIN
  Safe Mode account has no default password (so unless someone changed
  the password should be available).

  Some programs such as the Google Updater (if you've added the Google toolbar,
  Chrome or Google Earth) has been known to cause this problem.

  Error message when you log on to a Windows Vista-based or Windows 7
  computer by using a temporary profile: "the user profile Service has no logon.
  Unable to load the user profile.
  http://support.Microsoft.com/kb/947215

  Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
  http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "the user profile Service has no logon. Could not load user profile. "in
  Vista & Windows 7.
  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  How to fix error "your user profile was not loaded correctly! You have been connected with a
  temporary profile. "in Vista & Windows 7.
  http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

  BE VERY CAREFUL IF YOU USE THIS ONE:

  DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.

  ----------------------------------------------------------------------------------------------------------

  For Windows 7:

  How to enable or disable the built-in Windows 7 Administrator account
  http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.html

  Use the hidden administrator account to lower your user account APPLY / OK then
  Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
  If necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
  your password even (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the command prompt
  from there if necessary.

  How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
  http://www.SevenForums.com/tutorials/668-system-recovery-options.html

  What are the system recovery options in Windows 7?
  http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7

  How to create a Windows 7 - free methods system repair disc
  http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html

  ----------------------------------------------------------------------------------------------------------

  For Vista:
  
  How to enable or disable the real built-in Administrator account in Vista
  http://www.Vistax64.com/tutorials/67567-administrator-account.html

  Use the hidden administrator account to lower your user account APPLY / OK then
  Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
  If necessary after following the above message.

  You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
  your password even (or two with the same password) use a test or difficulty to another.

  You can run the command Admin account hidden from the command prompt
  from there if necessary.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  What are the system recovery options in Windows Vista?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-Vista

  How to create a Vista - free methods recovery disk
  http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html

  ---------------------------------------------------------------------------------------------------------

  If you can't access your old account you can still use an Admin to migrate to one
  new (remember to always leave an account Admin who is not used except)
  to test and difficulty).

  Difficulty to a Vista - corrupted user profile
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  Difficulty to a corrupt user - Windows 7 profile
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• During the closure after a browsing session I find several windows behind the window of the main browser I have not opened and they must be closed individually. What is the cause and how can I stop it?

  During the closure after a browsing session I find several windows behind the window of the main browser I have not opened and they must be closed individually. What is the cause and how can I stop it? Edit

  These windows display ads? They could be 'pop-under' designed to show when you are finished with your main window. Orbitz has these, for example. Irritating. I'm not sure of the best solution, i.e., advertising blocker blocker vs.

  If they are not ads, can you think anyway that they are related to the sites you visit?

  In addition, to close a tab (or window, if there is only one tab), you can press Ctrl + w. could speed up the process of their release until you find a real solution.

• When I open a tab/icon on my computer is much too large for my screen and I can't use my computer; 3 boxes in the upper right corner.

  When I open a tab/icon on my computer is much too large for my screen and I can't use my computer; 3 boxes at the top right corner with the-, square and X are too far to the right to do anything. How can I fit on my screen, so I can use my computer?

  Hello

  Please contact Microsoft Community.

  This problem is limited to any icon or it happens with all?

  Did you change to the computer?

  I suggest to refer to the following methods and check to see if it helps:

  Method 1:

  Install the latest display driver and check

  Uninstall the driver from Device Manager display.

  a. close all programs. This will ensure that the programs do not interfere with the update of the driver.
  b. right-click on my computer, and then click Properties. This will bring you from the System Properties menu.

  c. click Device Manager
  d. expand the display column of cards by clicking on them. This will show the graphical current map that is using your computer.
  e. right click on the adapter, then select Properties.
  f. click on the driver tab. This tab displays information about the current driver, as well as options to update, delete, uninstall, and back the driver.
  g. click on uninstall
  h. restart the computer

  You can install the latest display driver for download on the site of computer manufacturing, same driver will reinstall automatically after the restart, if the computer is connected to the Internet.

  Method 2:

  I suggest you try the system restore. Restore the system to a restore point when your computer was working fine

  System restore
  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  You can also check the Device Manager to see if the video card has a yellow exclamation on it with an error any:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/device-management

  I hope this helps.

  Kind regards
  Anusha

• I want to record a speech on my computer in order to make a copy. How and what can I connect?

  I want to record a speech on my computer in order to make a copy. How and what I connect

  Hi Jack,

  The first thing you need is a microphone. Most all laptops have a built-in. Desktop are not. You will need with a USB or 3.5 mm jack plug. They have very widely in quality, but the voice didn't need anything too fancy. You can also get an integrated with headphones, you might find very convenient.

  Once connected, you will need to enter the 'Sound' applet in Control Panel to configure it. Simply click Start, then Control Panel and then heard.
  Click reording and you should see a listed microphone. Select it and click on "configure". This will bring up the speech recognition tools. You must first configure your microphone to make sure that it works correctly. You can then select "Start speech recognition" and follow the steps for Windows "Teach" to recognize your voice. He learns that you're going to recognize your individual speech patterns.

  Enjoy! Mark <> Microsoft Partner

• Unable to boot computer after several attempts

  Earlier this year, I bought a Dell with Windows 8 is already installed.  I don't know where the disks are supplied with the computer.  Recently, I was unable to boot my computer.  I restored to factory settings, updated it, restored to an earlier point, and now it does nothing.  Sometimes I was able to connect and it works fine.  Then, I stopped him and I don't and then sign up again next time.  Right now, it is not yet running the auto repair.

  So, anyone have any suggestions or know what I have to do because I really want my computer to work.  If I can't connect, is there anything I should do?  How can I avoid this happening again?

  Sunday, September 14, 2014 00:51:23 + 0000, BK_81 wrote:

  Earlier this year, I bought a Dell with Windows 8 is already installed.  I don't know where the disks are supplied with the computer.

  Almost certainly, it came with none. Instead it came with a recovery
  partition.

  Recently, I was unable to boot my computer.  I restored to factory settings.

  Using the recovery partition?

  refreshed, restored to an earlier point, and now it does nothing.

  Unless you are having a hardware problem, you probably screwed
  something in these steps upward. Exactly what you were doing and how?

  Sometimes I was able to connect and it works fine.  Then, I stopped him and I don't and then sign up again next time.

  That looks a lot like a hardware problem. Maybe overheating.
  supply failure, hard drive, motherboard, RAM or something else.

  Right now, it is not yet running the auto repair.

  So, anyone have any suggestions or know what I have to do because I really want my computer to work.  If I can't connect, is there anything I should do?  How can I avoid this happening again?

  He must still be under warranty, and you should probably get Dell to
  see what is the problem.

• Every time that I start my computer, my 'wired' internet says network not identified, and I can't connect and I activate the router market?

  This only happens when I start my computer,

  I use windows 7
  I have acustom made
  Care,
  AMD athlon ii x 4 645 3.10 ghz processor
  NVIDIA geforce GTX 550 ti
  8 GB RAM
  and the 64-bit operating system
  If you need to know anything else please ask me :D

  Hello

  Thanks for posting the request in the Microsoft community forums!
  As I understand that when start you the internet computer says "wired says unidentified network". To get this fixed number, try the suggestions:

  1. which antivirus software is installed on the computer?
  2. don't you make changes on the computer before the show?

  Try the troubleshooting steps and check whether the problem is resolved.

  Method 1:
  Try the steps in the link and check.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:
  Try to disable firewall and antivirus installed on the computer software and try to connect to the internet:

  Enable or disable Windows Firewall
  http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-Firewall-on-or-off
  Disable the anti-virus software
  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software
  Note: disable the Windows Firewall and antivirus may make your computer (and your network, if you have one) more vulnerable to damage caused by worms or hackers.

  Method 3:
  You can also reset the stack TCP/IP go to this article and either click on "Fix it for me" or follow the instructions to fix it yourself:
  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  Links:
  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-the-Internet
  In Windows network connection issues
  http://support.Microsoft.com/kb/313242

  If you need help with this issue or other problems related to Windows Operating System, keep us informed. We will be happy to help you.

• Whenever I open Firefox, I get a message saying that Mozilla wants to make changes to my computer on firefox.exe. What happens and how can I stop it?

  Program name: Firefox
  Verified Publisher: Mozilla Corporation
  Original file: hard drive on this computer
  Location of program: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Certificate issued to: Mozilla Corporation
  Issued by: Thawte Code signing CA - G2
  Valid from 06/10/2011 to 10/29/2012

  You are welcome

• the window on my computer does not return to its original size and I can't use the max and min and exit button

  my window is too far to the right and ive tried to get to the original size and it will until a certain point to the left. This leaves me unable to use the max and min and exit tabs

  Hello

  1. What is the brand and model of the computer?

  2. is it a laptop or a desktop computer?

  3. the problem occurs after leaving the game or program?

  4 did you a recent software or changes to the material on the computer?

  Method 1:

  If this happens when you leave a game, I suggest you to follow the steps mentioned in the link and check.

  Open the troubleshooter of display quality

  http://Windows.Microsoft.com/en-us/Windows7/open-the-display-quality-Troubleshooter

  Method 2:

  I also suggest you go through the steps mentioned in the link and the Coachman.

  Change your screen resolution

  http://Windows.Microsoft.com/en-us/Windows7/change-your-screen-resolution

  Method 3:

  Step 1:

  I also suggest you to check if the problem persists in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Step 2:

  You can also check if the problem persists in a clean boot state.

  Clean boot:

  This could happen if one of the substantive programmes is in conflict with the proper functioning of your computer. To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7 http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 article to start the computer to a normal startup.

  Hope this helps and keep us posted.

• I don't remember my password got computer 3 years ago the children are older and I can't change settings

  what you should know

  Hi HazelMcGuire,

  1. what happens when you try to change the settings on the computer?

  2. What is the version of Windows installed on the computer?

  Check out the link below reminder on forgotten Windows passwords.

  Keep secure passwords - Microsoft strategy on move the passwords

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/keeping-passwords-secure-Microsoft-policy-on/3eba3150-8742-4264-be9f-0daaad2282cd

  How to connect to your Windows XP-based computer if you forget your password or if your password expires

  http://support.Microsoft.com/kb/321305

  What to do if you forget your Windows password

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password

• My computer says that it recognizes the new hardware and I can't find what he's talking about

  He asked me to put on a CD to search for drivers. But I have no idea about what program/material. I checked the control panel to see if something is marked and could not find anything. Checked to make sure that my updates are current, all right here.

  go to start, then right-click on my computer and select Manage

  then choose Device Manager

  in Device Manager, check out, view hidden devices

  in the right pane look for warnings or errors, double-click on it to see if the device name appears.

  then go to website of manufacturers to download driver, or search for an update

  ---------------------------------

  Also sometimes when you uninstall a program or a device driver is left behind.

  SuperAntispyware did this, so I just uninstall driver, no error message more.

• I recently updated my computer (the thing has changed since the problem) and now my LAN is enabled at startup, even if I turn it off before you stop. Why? And how can I stop this?

  Since my last update, that is the only thing changed on my computer since it began, my lan port is always on at the start of Vista (Ultimate).   I'm on a laptop that has a LAN on board.  I have not had this problem NEVER before and have owned the laptop for about two years now.    The only thing that has changed on the computer's windows updates.

  I spent the length of a deactivation of the adapter before you turn off the laptop and tried to load a page that is not in the temporary memory, and get the usual page cannot be displayed.  I scanned for virus using AVG and Bell Internet Security scanner online McAfee.   I also ran Windows MSRT and found nothing unusual.   I also checked to see if the BIOS has been changed somehow, and nothing has changed.   Boot to LAN is disabled.   So I can only conclude that I have a virus has not been detected (but have no slowdowns or anything different in the security under gpedit.msc logs), or the more recent Windows Update changed some settings.

  But weak and this is every time I start up the computer from the local network is enabled.   If I let the cable disconnected at startup, it does not reconnect to the modem cable after rehabilitation and I have to disable and then re-enable the LAN to access the internet.

  Please let me know if anyone else has this problem or have heard of this and know a solution.

  Thank you.

  Leqs D.

  Hi Lequarius,

  ·          You receive an error message when you restart?

  Method 1

  I suggest that you download and install the updated drivers for the network adapter on the computer by visiting the card manufacturer or computer manufacturer website manually.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2

  If the previous step fails then I would suggest that temporary you disable the security software installed on the computer and check if the problem persists.

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

• After installation, my computer does not detect my Laserjet 1536dbf network and I can't print

  I installed my printer on my home network. Now, my computer can not detect so I can't print.

  I noticed that the printer indicates a different IP address that the router assigns to him and which is visible on the router configuration Web page. Reset of the printer and my router has no effect.

  I had to reset my router a few days due to a failure in broadband. Could be the cause of the problem?

  It turns out that reset the router after the failure in broadband, the other day off the ethernet port to which the printer is conncected. It's strange because the previous resets did not do that.

  Thanks for your help.