My contacts are not all correct
Specifically the contact of my wife presents itself as another contact on my Apple Watch. Nice paired and paired again with no. changes. How can I fix this?
HI - try the following steps:
- On your iPhone, in the Contacts app, check that:
- You have created a contact card for your wife and that it contains his phone number, e-mail address, etc..
- There is no other card contact containing one of your wife's contact details (see the map for anyone who is "another contact" in your question).
- Activate the iCloud contacts:
- On your iPhone, go to: settings > iCloud - allow Contacts.
- On your iPhone, tell Siri ""
of wife ". "
- When finished, it can help restore your sync data:
- On your iPhone, in the application of the watch to go: My Watch (tab) > General > reset > reset sync data.
- This process will erase and then replace all the data on contacts on your watch. Nothing seems to happen when you type, but the process is running in the background (invisible to the user), allow a minute or two later.
- You may also add your wife to friends on your watch:
- On your iPhone, in the application of the watch, go to: Watch My > friends > press any place open to the circle of friends > then press the big "+" sign in the middle (if you run out of open tasks, by scanning left to add a new group) > select your wife.
Tags: Apple Watch
Similar Questions
-
Re: Satellite P300 - display colors are not displayed correctly
A few months ago appeared a strange problem with my laptop screen as you can see in this video made by me: http://www.youtube.com/watch?v=tjpsXNB6prc
I tried to tilt the cover but without results. Sometimes it comes back normal picture all of a sudden. If I close the lid when I stopped the laptop, when the next market problem appears.
With the help of Corel, I noticed that the RGB colors are not displayed correctly. I connected the laptop to a VGA monitor and the image was normal.
I would like to know what the problem is so that I am able to fix it myself.
Thank you.
Hey Buddy,
It of great that you've made a video of your problem, most other users don t do that, but it makes history. :)
In any case, it is really hard to say what part is causing this problem. Either it's internal display itself or graphics card. Easiest way to check this is connect an external monitor and check what is happening.
So if it was a normal external VGA monitor image it seems to be the graphics card. This means that the motherboard must be replaced and this can be done from an authorized service provider. Then get in touch with the guy and ask for help.
-
Try to use Windows Update to install 2 updates (Windows Internet Explorer 9 for Windows Vista) and an a security update Cumulative for Internet Explorer 8 for Windows Vista KB253048. It's on a laptop at home unique stand alone, works with Windows Vista Home Premium SP2.
Windows Update initially reported two updates correctly installed and asks me to restart the PC, what I'm doing. Before the connection at the reboot prompt, I get a message saying "updates are not configured correctly. Restoration of the changes. It is the next messages saying: step 1/2/3 of 3 0% complete.
After I then connect I get the message ' Windows to not install important updates.Update history reveals the KB253048 cannot install (error 80070005), but IE9 installed successfully. However when click on the IE icon and run Internet Explorer version 8 of Internet Explorer, I get, not version 9.
I tried to do this several times on 2 days, but get same problem.
This gives a shot.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Applications, (Norton and McAfee) are notorious for not not upgrade (or uninstalling) itself.
[You may want to print these instructions for reference offline. If a step said to reboot, reboot.]
1. download the Norton Removal Tool, save it to your desktop: ftp://ftp.symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe
2. close all open applications (that is, anything with an icon on the taskbar).
3. After completing some you have a copy of your handy product key, uninstall all Norton software (including LiveUpdate and everything Norton Add ons) via Control Panel | Programs | Uninstall a program (or Control Panel |) Programs and features, if you are using the classic view).
4 IMPORTANT! -Online activate Windows Firewall immediately after the restart.
NB: Now you're "working without a net": no to ANYTHING else online (e.g., navigation, reading e-mail, chat) until you have completed step #7 below!
5. right click on the file that you saved in step #1 above, and then select run as administrator. DO TAP not your keyboard until the race ends, then restart.
6. do a clean install of Norton 360 (using your product ID, if need be) & reboot. CF. http://www.symantec.com/norton/support/kb/web_view.jsp?wv_type=public_web&docurl=20080514162318EN
NOTE: Do NOT activate or install additional modules of Norton (for example, Norton Anti-Phishing) immediately!
7. manually and repeatedly run LiveUpdate (Norton) until you get a prompt "no update more".8. open Internet Explorer (only) to http://support.microsoft.com/kb/923737 & run the difficulty.
9. IMPORTANT - DON'T SKIP THIS STEP! Open Internet Explorer, to http://support.microsoft.com/kb/971058 of => & run who fix it in methods AGGRESSIVE then by DEFAULT. [1]
10. restart one last & test.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
[1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.=======================================
WARNING: MS MVPs represent or work for Microsoft
http://MVP.support.Microsoft.com/GP/mvpfaqs -
When I reboot after installation of service pack 2 on a computer laptop with Windows Vista Home Premium 32-bit Dell XPS M1530, the message comes out and says that updates are not configured correctly, returning from changes. Do not turn off your computer. I installed update readiness tool, but it does still every time. I tried to disable the antivirus software prior to installation.
Hello1. how you try to install Service Pack 2?2. are you able to boot to the desktop?Method:Step 1: If you are able to start the computer in normal mode, then try a clean boot.To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
http://support.Microsoft.com/kb/929135
Please note: after troubleshooting, start the computer in normal mode.Step 2: Try to install Service Pack 2 manually.How to obtain the latest Windows Vista service pack
If you are unable to start the computer, then you can follow this link to start the computer in safe mode.
Start your computer in safe mode
http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-modeIf you are unable to install Service pack 2, you can consult this article.Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates
http://support.Microsoft.com/kb/949358Please note: method 2 refers about upgrade on site. Perform a repair installation/place will not damage files and applications that are currently installed on your computer. However, I suggest you to back up all important data on the computer before you perform the upgrade on the spot. -
I need to install the SP1 for vista before SP2 for vista in order to use 2012 TrendMicro internet security. Thanks in advance
Original title: Hi can someone help me please. I need to install the SP1 for vista, but get this message at the stage of installing "updates are not configured correctly. How can change recovery"I fix
I understand that you now have returned back to factory settings and have installed all updates except for service packs.
.
You will need to install the required service packs-
How to get the latest Vista Service Pack
http://support.Microsoft.com/kb/935791Windows Vista and Windows Server 2008 service Pack is not available for installation via Windows Update
http://support.Microsoft.com/kb/948343You will need to install SP1 before installing Sp2.
Once your computer is up to date, then you can think of Windows 7
http://www.Microsoft.com/en-US/Download/details.aspx?ID=20
I can't help you with the trend, but from memory, you must allow it's Installer to download to facilitate the download and installation etc.
-
My contacts are not displayed in her select a recipient option when creating a new email. They appear in my contacts.
I didn't know I was so vague with my information. However I understand it. I continued to try to export contacts from a previous e-mail program to a .csv file and few would go. I went back in my contacts Windows Mail, click on properties and noticed that the contacts had somehow hidden checked. I have then all selected and not the box and now they appear in the Select Recipient window.
Thanks for responding -
Contacts are not fed to the program through charger?
We have activated the program and the charger, and contacts are not entered in the program. Where is the blocking in the Manger and how can we troubleshooting feeder.
Hi Sheershak,
The reason behind there can be additional settings that can limit the contacts in a program stream, this includes: assessment the limits of time. and Advanced Options - Assessment Date & additional Restrictions. These areas have been identified below. Check these areas to ensure that they are configured correctly.
Check restrict the time of evolution and advance the option to the power Panel.
-
Sessions are not assigned correct consumer to the Resource Manager groups
Hi all
I have a number of consumer groups that I attributed to users:
USERNAME INITIAL_RSRC_CONSUMER_GROUP
------------------------------ ------------------------------
RM_BOGEY0 SYS_GROUP
RM_BOGEY1 S/N
RM_BOGEY3 DAAS_PLATINUM
RM_BOGEY4 DAAS_GOLD
RM_BOGEY5 DAAS_SILVER
RM_BOGEY6 DAAS_BRONZE
RM_BOGEY7 DAAS_LOW_PRI
RM_BOGEY2 DEFAULT_CONSUMER_GROUP
My understanding of the present, is when a user connects they are assigned to this group of consumers.
However, this is not case.
When the user connects they are attributed to OTHER_GROUPS
SQL > SELECT SID, SERIAL #, USER name, the RESOURCE_CONSUMER_GROUP OF GV$ SESSION where RESOURCE_CONSUMER_GROUP! = USER name and "_ORACLE_BACKGROUND_GROUP_" like '% RM_BOGEY ';
SID, SERIAL # USERNAME RESOURCE_CONSUMER_GROUP
---------- ---------- ------------------------------ --------------------------------
RM_BOGEY5 3 499 OTHER_GROUPS
RM_BOGEY6 196 295 OTHER_GROUPS
RM_BOGEY0 197 433 OTHER_GROUPS
RM_BOGEY7 294 883 OTHER_GROUPS
RM_BOGEY1 868 189 OTHER_GROUPS
1253 81 RM_BOGEY2 OTHER_GROUPS
1351 25 RM_BOGEY3 OTHER_GROUPS
1445 481 RM_BOGEY4 OTHER_GROUPS
I can change consumer groups by running:
exec DBMS_RESOURCE_MANAGER. SWITCH_CONSUMER_GROUP_FOR_USER ("RM_BOGEY0", "SYS_GROUP");
exec DBMS_RESOURCE_MANAGER. SWITCH_CONSUMER_GROUP_FOR_USER ("RM_BOGEY1", "S/N");
exec DBMS_RESOURCE_MANAGER. SWITCH_CONSUMER_GROUP_FOR_USER ("RM_BOGEY3", "DAAS_PLATINUM");
exec DBMS_RESOURCE_MANAGER. SWITCH_CONSUMER_GROUP_FOR_USER ("RM_BOGEY4", "DAAS_GOLD");
exec DBMS_RESOURCE_MANAGER. SWITCH_CONSUMER_GROUP_FOR_USER ("RM_BOGEY5", "DAAS_SILVER");
exec DBMS_RESOURCE_MANAGER. SWITCH_CONSUMER_GROUP_FOR_USER ("RM_BOGEY6", "DAAS_BRONZE");
exec DBMS_RESOURCE_MANAGER. SWITCH_CONSUMER_GROUP_FOR_USER ("RM_BOGEY7", "DAAS_LOW_PRI");
And then everything is as I expect to be, but I do not understand why the groups are not be correctly assigned at login?
Any help is very appreciated
Also it is a RAC, but I only connect via a node for now.
Concerning
G.
Hi sb92075
What you say is correct.
Turns out that the problem was that I missed a step
exec DBMS_RESOURCE_MANAGER_privs.grant_switch_consumer_group ('RM_BOGEY0', 'SYS_GROUP', FALSE);
exec DBMS_RESOURCE_MANAGER_privs.grant_switch_consumer_group ('RM_BOGEY1', 'DBA', FALSE);
exec DBMS_RESOURCE_MANAGER_privs.grant_switch_consumer_group ('RM_BOGEY3', 'DAAS_PLATINUM', FALSE);
exec DBMS_RESOURCE_MANAGER_privs.grant_switch_consumer_group ('RM_BOGEY4', 'DAAS_GOLD', FALSE);
exec DBMS_RESOURCE_MANAGER_privs.grant_switch_consumer_group ('RM_BOGEY5', 'DAAS_SILVER', FALSE);
exec DBMS_RESOURCE_MANAGER_privs.grant_switch_consumer_group ('RM_BOGEY6', 'DAAS_BRONZE', FALSE);
exec DBMS_RESOURCE_MANAGER_privs.grant_switch_consumer_group ('RM_BOGEY7', 'DAAS_LOW_PRI', FALSE);
It's working now
-
The company that multiple instances are not created correctly with a separate service account.
The questions that I have are very similar to the issues identified in the link below.
My company of 11 CF will not create additional services for my sites of cold fusion beyond the initial service created during the installation process. My problems are compounded because when I try and uninstall the CF11 Uninstalling application crashes and generates the error below. I now have to try to manually uninstall to reinstall CF11. Any help or suggestion to get the problem solved is welcome.
Description:
A problem caused this program blocking interact with Windows.
Signature of the problem:
Problem event name: AppHangB1
Application name: javaw.exe
Application version: 7.0.510.13
Application timestamp: 52b25e38
Hang Signature: 0967
Hanging Type: 6144
OS version: 6.1.7601.2.1.0.274.10
Locale ID: 1033
Signing of additional blocking 1: 09675b5d8f587c9fd57b85cb72e629da
Signing of additional blocking 2: 2cff
Signing of additional blocking 3: 2cff32d5db809ac6ce8170a1d7ac1eb0
Signature of blocking additional 4:0967
Signing of additional blocking 5: 09675b5d8f587c9fd57b85cb72e629da
Signing of additional blocking 6: 2cff
Signing of additional blocking 7: 2cff32d5db809ac6ce8170a1d7ac1eb0
I solved the problem with the implementation of Cold Fusion 11. I had to disable Windows server 2008 R2 UAC for all users in order to complete the installation with IIS as a web server. This also solves the problem with the inability to uninstall Cold Fusion.
-
The photos on my site header are not formatting correctly in Mozilla. How can I fix it?
Hello
Photos header on every page of my site are not formatting correctly in Mozilla. The photos appear on the right side of the site and you need to scroll over to see. They work on other browsers such as Chrome and Safari. How can I fix it? Here is the link to my site: http://cpd.berkeley.edu/.
Thanks for your help!
What is even more strange, is that if you reload the page in version 33, it's in the right place. This happens on the Beta? https://www.Mozilla.org/en-us/Firefox/channel/
If the problem persists, please clear the cache and refresh the page, then if it happens again please webcompat.com create a bug here report.
-
Display of Firefox about that clients site problems:
http://gardenia.dk/collections/collection/The photos are not displayed correctly in Firefox - only a very little bit of the image is visible, bad scale (displayed correctly in Safari and Google Chrome).
Can I do anything to make it work in Firefox, too?
Kind regards
AnnetteYou do not see the thumbnail, but the big picture because the width of the thumbnail image is set to 500.
Add code to the userContent.css file.
The file userChrome.css (UI) customization and userContent.css (Web sites) are located in the chrome folder in the Firefox profile folder.
@-moz-document domain(gardenia.dk){ a.thickbox > img { width: 120px !important; } }
-
DVD on Satellite 1800 movies are not read correctly
I bought a Satellite 1800. One with processor Intel 1.1 ghz, 256 MB ram and 20 GB HARD drive.
The DVD drive seems to work fine, but not with DVD movies. I tried various movie playing software, and each of them are not played correctly in the graphics and sounds. For me, it looks like a problem with the graphics display power rather than drive. If this machine must be able to play movies with standard charts, etc.?
Thank you.
Hello
Firstly: have you installed the LATEST drivers offered on the download Drivers Toshiba site? Must check out and make updates if not already done. The other thing is: you have tried different players and they didn t give you the you´ve of quality of reading expected.
So now try THIS player: www.videolan.org
VLC player wins the best out of your equipment of machines even if you´ve had an older system. I played movies Divx and DVD on pentium 3 and pentium 2 machines, so your machine should theoretically able to do.
Welcome them
-
Hello!
After the end of my second day of test error, I put this question on the table:
I use ArraytoChannels function to store ADO recordsets as strings. What is strange, is that for the first Recordset, it works; but for the next time through the loop, it always fails with the error message 'cannot be added because the channels of the target are not all the same length.
I confirmed that:
the RowData sizes and the ChannelNames are equal,
both spend the isarray = true test,
I change the order of the ChannelNames,.
I have reconnected/disconnected from the oConnexion every time, nothing has changed.
Apparently I'm missing something - but crazy to know what! -If anyone can share his opinion I'll so much appriciate. Here is my code:
oTables = Array ("WellStates", "ChokeData", "WellParameters", "FlowData", "PumpData", "SensorsData", "ModelCalculatedData")
Call OpenSQLConnection
Set oRecordset = CreateObject ("ADODB. Recordset')
Call SelectWell
Call GetWellStateIDsData.Root.Clear
for j = 0 to ubound(oTables,1)sSQLSting = "select * []" & oTables (j) & "] where [WellStateID] between" & WellStateIDFirst & "and" & WellStateIDLast ".
oRecordset.Open sSQLSting, oConnexion
Protected oFieldNames: table: ReDim oFieldNames (orecordset. Fields.Count - 1).
for i = 0 to orecordset. Fields.Count - 1
oFieldNames (i) = orecordset. Fields.Item (i) .name
next
oArray = oRecordset.GetRows (-1, 0, oFieldNames)
Set oGroup = Data .root .ChannelGroups .Add (oTables (j))oArray, oFieldNames arraytochannels
oRecordset.close
oConnection.Close
nextSub GetWellStateIDs
sSQLSting = "select * from [WellStates] where [wellid] =" & WellID
oRecordset.Open sSQLSting, oConnexion
oArray = oRecordset.GetRows)
WellStateIDFirst = oArray (0,0)
WellStateIDLast = oArray (0, ubound(oArray,2))
oRecordset.close
EndSubSub OpenSQLConnection
Set WshNetwork = CreateObject
oComputerName = WshNetwork.ComputerName
oDB = "MX2. Player.DB ".
Set oConnexion = CreateObject ("ADODB. Connection")
oProvider = "Provider = SQLOLEDB.1; Integrated Security = SSPI; PeoExecuteist Security Info = True; Data Source ='
oProvider = oProvider & oComputerName & "\MX; Use procedure for prepare = 1; Machine translation = True; The packet size = 4096; Workstation ID ="
oProvider = oProvider & oComputerName & " Use encryption for data = False; Tag with column collation when possible = False; Initial Catalog ='
oProvider = oProvider & oDB
oConnection.ConnectionString = oProvider
oConnection.Open
EndSubAnother clue. If you check using DIAdem
Microsoft Windows Script Debugger
you are able to install the debugger in DIAdem.
It would potentially have shown that the command does not work as expected.
Sorry for the inconveniance
Andreas
-
original title: apps do not correctly configured
The default Outlook Express mail, The default Outlook in the Express News with the Internet Explorer Web Proxy are not configured correctly. Because I had problems with the game apps and stuff in my email address.
Hello
· You receive an error message or error code?
You can access the links below:
How Set Up Outlook Express - and http://support.microsoft.com/kb/2409264
To configure the web proxy:
HOW to: Configure Internet Explorer 6.0 as a Web Proxy Client in Windows 2000
-
M/S using wireless keyboard 800 and some characters are not displayed correctly
Have just connected a new wireless keyboard M/S 800, and some characters are not displayed correctly. For example, I get "when @ (update 2) is pressed on the keyboard and the £ runs it shift 3.» Am currently using XP SP3.
No problems with my original keyboard, Wired.
Hi simoncd.
What is your location. The reason why I ask this is that your keyboard is set to the standard UK layout. Looks like you have the keyboard for the U.S. keyboard layout. Shift + 2 is the "on the UK keyboard, @ on the U.S. keyboard."
To change the keyboard settings you must go to "Control Panel", then "regional and language options". The first page allows you to set the number format and character relative to your location and also set the location. Check these and modify accordingly so badly. You want to then go to the second 'languages' tab and click on the button "Details". Here you can set the default keyboard. This changes if necessary. This should, hopefully restore your keyboard to the presentation that you want.
Maybe you are looking for
-
iPhone 6, one side of load
my iphone 6 now load only on one side, I tried different usb cable and no luck. After doing several searches online, I replaced the loading port and apparently did not help. phone is out of warranty so the apple support will do nothing. any thoughts
-
I wonder how Apple will handle the bug of 1970...
The way I see it, is that they could at least go one of two ways... Either they could wimp out and limit the possible dates, a user can enter and use on the phone... or... They could fix the bug so that users could have more fun and set the date to w
-
I have a Lenovo Y580 and I had a few questions about the physical limits, since they are not where under the technical specifications of the laptop (unless I'm wrong or overlooking something). First of all, I want to know if I'm allowed to upgrade th
-
original title: error number: 0 x 80040707When I try to install the Sims House Party, the installer launches and then immediately closes, gives me the error "0 x 80040707 - call function DLL crashed: SORTS." PathGetSpecialFolder. According to the com
-
Windows vista 64-bit Defender encountered an error: 0x800705b4
Windows vista 64-bit Defender encountered an error: 0x800705b4. I am trying to start my defender and have been unable to accomplish this. I tried to start the Defender Service service and Application and then turned off the Security Essentials again