My control panel shows not all of my installed programs

Similar Questions

• Attachment panel shows not all attachments

  I use Thunderbird 31.1.1 on a Windows Vista system.

  Sometimes, I get an email with multiple attachments. When I click on the little arrow in the attachment pane to see all the attachments, I get only to see one or two of them and not all of them. There is no scroll bar in the control panel of the attachment I can well.

  Help?

  At the top of the attachment pane, there is a place where the cursor turns into a two-headed arrow, and when you do that, you can click and drag the pane goes up and down. In addition, the complete list of accessories is displayed Message and attachments.

• HP Pavilion p7-1154 - SM Bus controller shows not all the drivers installed.

  Hello. I have a desktop HP Pavilion p7-1154 PC.

  I updated the BIOS to the Version: 7.16 Rev, the controller USB Version: 1.0.0.72 Rev's and drivers wireless Version: 3.2.14.0 Rev a.

  All were downloaded from the HP Web site under downloads for my model. I'm running Windows 7 64.

  In Device Manager, I was always see SM Bus controller as no driver installed.

  Even after the updates listed here, it has not changed.

  Can you please tell me the best and the most recent drivers for this component.

  I think that this problem won't let me upgrade to Windows 8.

  Thank you

  George

  You have itried Windows update? Often, you can find the hardware drivers there.

  Have you tried to reinstall the chipset drivers?

  Is there a driver to the driver & software download section for your PC that is specifically for the SM Bus. Try it out and post your results here.

• Control Panel shows that 4 GB of RAM, but product specs say I should have 8GB

  My HP Pavilion Elite HPE-250f desktop computer is supposed to get 8 GB of the RAM factory installed, but the control panel shows only 4 GB. When I run the diagnostic with the Support Assistant software it says that everything is working well, but also shows that 4 GB of RAM. I've had the computer for several months and the warranty just expired. In the past, I noticed it says 4 GB and thought that I should have bought a computer with only 4 GB, but it has always seemed strange to me. I looked towards the top of the record online and it says the HPE-250f has of 8 GB, and it also says 8 GB on the box in which it came. I didn't do any changes to the computer and never open the Cabinet. I hesitate to open the cupboard, but do not feel I should have to pay a lot of money to understand this.

  HP Pavilion Elite HPE-250f

  Windows 7 Home Premium 64-bit

  It took me a few tries - and months of frustration - but I solved the problem by carefully removing the memory cards, clean gently slots and cards and firmly the resettlement of the cards. It's been several months now, but the memory has been resolved. I had serious problems, as it is stated in this thread, with a catastrophic failure of the graphics card and HARD disk failure. I read on several posts that this particular graphics card was problematic, so I've upgraded to a Radeon HD 7700 series. I got the Core edition, which has 2 GB of memory defect to 1 GB. No problem since.

  In case of hard drive failure, it was a disaster! I replaced the HARD drive of 1 TB with a 512 GB SSD, but it kept the infection by a rootkit that I couldn't clean up. I tried cleaners virus and rootkit of several software companies with no joy. Not even the first products like Kaspersky, McAfee, Sophos, BitDefender and other companies. I reformatted the drive several times, but the hook came back in return. Finally, I brought the computer to a friend who is a computer SCIENCE professional. The rootkit probably lies in the commercial cloning software (Acronis True Image HD) that came with the SSD, it said. We loaded the operating system without using Acronis and have not had any problems since! I've also installed a WD Blue 1 TB HDD and rebuilt directories so that all libraries (Documents, photos, videos, etc.) are on the disk hard while the system is installed on the solid state drive. The upgrades were worth every penny! Now, my desktop HP 5 years computer works very well and the performance is very good even by today's standards. Boot times are much faster, too.

• computer/control panel does not load in windows 7

  Hello

  I had this problem and have sought for a while again, unsuccessfully, trying to open the computer, it's green bar slowing down the loading, but once completed no content will show in the computer at the same time control panel does not load.  This problem will not occur all the time. and if I close the window and reopen it. He came back to normal, did a sfc according to other threads have disabled the network discovery.  past again, Please HELP?

  CONCERNING
  LEE

  Click Start
  Type: CMD, according to the results, right-click CMD
  Click on "Run as Administrator"
  At the command prompt, type: sfc/scannow

  This will check for any breach of integrity

  Restart your system

  also:

  Check your hard drive for errors:

  Click Start

  Type: CMD, according to the results, right-click CMD

  Click on "Run as Administrator"

  At the command prompt, type: chkdsk /f /r

  When you restart your system, your computer will be scanned for errors and will try to correct them.

  If the problem persists, I suggest that you scan your computer for malicious programs:

  There are some that will hide your files/folders so that you don't normally see them. I strongly suggest to run a scan on your computer with your antivirus/antimalware software. If you need to, you can also use the Microsoft Safety Scanner, it's free:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Also, if your files are hidden, check out the following article on how to display the:

  http://Windows.Microsoft.com/en-us/Windows7/show-hidden-files

• the audio control panel does not appear on various websites which I am sure they are there. I see them in IE and chrome, but not in FF

  The audio control panel does not show simply. On this site, I should see the control panel. http://www.testplek.annemariebeeke.nl/huiswerkopdracht_week3_bonus.html.
  It does not show in the other browsers, other people can see it, but I can't.
  Even with these sites:
  http://www.jokevan.nl/HTML5/oef3-3.html
  http://kokenvoorpapegaaien.nl/Kellerhuis/oef3-3.html

  Reload Web pages, and ignore the cache.

  • Hold SHIFT and click reload.
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Cmd + Shift + R' (MAC)

  Clear the cache and cookies from sites that cause problems.

  "Clear the Cache":

  • Tools > Options > advanced > network > storage (Cache) offline: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• HP Officejet 4620: The buttons on my control panel do not work

  So I bought my printer used from a friend, he has been working well, but I had some problems:

  1. the buttons on the control panel have not worked

  2. I'll make a message pop up on the screen that says "infringement or used (s), the original HP of ink in one or more.." and I can't read the rest of the message because I have to scroll down, but the buttons do not work.

  I tried to look in the user manual, but I did find something that can help me.  I am a student and need to use my printer almost every day so it was very stressful. Any help would be wonderful!

  Hello @Ellie33,

  Thank you for writing back.

  Glad to know that you fixed the ink of related issues. If you still encounter display problems, it could be more likely a hardware failure with the machine.

  I would contact HP tech support to create a service if the printer is under warranty. Alternatively, you can call technical support so that the good options to upgrade, you can benefit if your printer is already out of warranty.

  You can visit http://support.hp.com/us-en/contact-hp and fill in the details of your product to get the tech support number.

  If you have trouble, let me know and I'll do my best to help.

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• HP Envy J049TX: Beats Audio Control Panel is not start/work

  My Beats Audio Control Panel does not work. When I Open Beats Audio, a dialog box appears indicating that

  "IDT Audio from PC has stopped working"

  I have recently upgraded to Windows 8.1 and the only problem I found was that the Beats Audio Control Panel does not work.

  I also tried to uninstall drivers and reinstall it from the hp website, find my model number and appropriate IDT Audio driver software, but this does not work too.
  Already when I got windows 8, beats audio has worked, but as soon as I upgraded to this 8.1, this error.

  Hi @MegaArm ,

  Welcome to the HP Forums!

  This is a fantastic place to find answers and suggestions!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that your audio Beats worked very well until you upgraded to 8.1 Windows now, you get a dialog box indicating the "'IDT Audio of PC has stopped working". "

  You have tried to uninstall and reinstall the driver now prevail.

  If you go to Device Manager, what is the error on the audio device?

  Have you impossible to uninstall the driver or unable to reinstall the driver on the HP website.

  If you access the Device Manager can you right click on the audio and update the driver from here or do a driver roll back.

  Then, I'll try to do a HP PC - refresh your PC to solve problems (Windows 8) .

  The question must always be, if a recovery to factory.

  HP computers - performing a recovery of HP (Windows 8) system

  During recovery, you will receive an option to backup your personal files to avoid data loss. If you have not already done one, I suggest do you it now.

  HP computers - restore files that have been supported to the top using HP Recovery Manager (Windows 8)

  Once you have completed this process do all your Windows updates.

  Now run the HP Support Assistant to acquire the HP updates.

  Here is a link to the Computers HP - update of Windows 8 to 8.1 as a guide to redo the Windows 8.1 update.

  Good luck!

• Control Panel does not open

  That being said, I have scanned for viruses and spyware (as suggested on other sites). Still nothing.

  HERE'S WHAT OF ODD.
  After a reboot and the control panel will not be opened (as well as My Documents, search, Recycle Bin, my computer, etc) I have right, click on start, properties tab of the Menu start customize key, your advanced, and select control panel - display as a link (IT IS ALREADY SELECTED) click OK and apply. NOW I CAN REACH JUST AS USUAL. Once I reboot it is back to again be a problem.

  BTW it does not work in safe mode.

  Hi Ali,

  To help you to propose measures to solve the problem, I would appreciate if you could answer the following questions:

  1. you receive an error message or error code?

  2 did you do changes on the computer before the show?

  You can download the fix from the article below and run it. Then check if the problem persists:

  Control Panel not responding in Windows XP

  http://support.Microsoft.com/kb/843551

  You can also see the following article for more information:

  Cannot open the item user accounts in Control Panel on a Windows XP-based computer

  http://support.Microsoft.com/kb/919292

  Hope this information is useful.

• On the start menu control panel does not work

  When I click on the start menu control Panel icon, it says and I quote": {26EE0668-A00A-44D7-9371-BEB064C98683}"the RPC server is unavailable." All other icons are thus working computer, network, printers, etc all its only the control panel is not working. Two questions how to fix this and what is the RPC server?

  Hi I.Saenz,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  3. do you have security software installed on the computer?

  Remote procedure call (RPC) is a part of Windows programs, which is "an interprocess communication technique that allows the software client and server to communicate." CPP is designed to provide a common interface between applications, making it easy for programs to communicate with the servers.

  Check if the problem persists in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode

  If the problem persists in safe mode then I suggest that scan you SFC on the computer that would be a system file corrupt on the computer search and replace.

  The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows Vista installation CD.

  For more information please visit the link below.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Control Panel; Does not open programs and features.

  Help! Programs and features in Control Panel does not open. It's as if the file is no longer there.

  Hello

  I had the same problem, caused by an update of thugs. I had to do a repair installation to fix the problem. For this,.

  1. Start your Windows computer.
  2. Insert your Windows system DVD into the DVD drive.
  3. Once there either using Windows Explorer or AutoPlay navigate Windows system disc and double-click on the file called "Setup.exe".
  4. Let Windows boot phase review and collection, when that is complete, Windows continues to install Windows 7 on your existing installation of Windows 7. If there is a problem, Windows will give you the opportunity to continue or back out (I would recommend back out).
  5. Once installation is complete, you will need to then activation key, then go to Windows Update and precede to download and install all the WU you miss.

  That's all. It takes more time to make that a full install as Windows must work around your installed files. But it is the method that worked for me.

  Let me know if this solves the problem for you.

  Kind regards

  BearPup

• Win 7 Prof 64 bit, devices and printers Control Panel does not load

  When I try to open the devices and printer Panel, it opens initially but shows not all devices. The status bar at the top slips slowly into overall but never reaches the end to load completely. I've uninstalled and reinstalled the latest version of all my printer drivers (using the manufactures installation routines. Research in various forums talk about start/stop the bluetooth services, but none of this helps.

  I created another user account and when I connect it, devices and printers opens OK.

  I could live with that if it wasn't for the fact that I can't disconnect safely from my drive external hard usb. When I right click on the icon "safely remove hardware and eject Media" on my task bar the only option I have is 'Open devices and printers' and then I'm back to my original problem. The list of the menu I receive when I right click on the drive in WIndows Exploxer does not include a choice of ejection (it does for a flash drive, but not my hard drive).
  (I have a laptop with Win 7 64 bit installed and it shows devices connected when I right click on the icon "safely remove...) »).

  I tried to turn off nonMicrosoft al and restart services but still having the same problem. In the past, I had run CCleaner to clean the registry (no, I did not indicate a restore point) and I saw on a forum how that could have created the problem. I have since deleted CCleaner

  I use Avast Antivirus, Windows firewall, SnagIt and Cobian backup. Short of re - install Win 7 (please, no) or by creating a new user and all displacement there (not even sure how to do this) is anyone know how to fix this? Or at least how I can safely disconnect my drive hard usb without messing up his data?

  Then as indicated, the user profile is corrupted

• My control panel shows only one user, but when I start it shows two users on the logon screen. and I know no other password

  My control panel shows only one user, but when I start it shows two users on the logon screen. My user is an administrator. But I do not know password of another user. I am currently using as an administrator. But I also want other user password. Answer please

  Your machine has only two accounts: admin and guest. I saw a few messages before which the poster makes an additional account on the log on screen that does not exist. Since there is not, it cannot be used.

  Also note that you play a game at high risk, having only one administrator account. This forum deals daily with posters including one and only the admin account went bad for one reason or other. Something about it now while you can: create, test, and document a spare, even admin account that you have a spare emergency House key.

• Windows Update Control Panel does not open in Windows 8

  Hello

  I use Windows 8 unique language that came pre-installed with my laptop.

  My problem is that the option to update windows from the Control Panel does not open. All other options like Firewall, power, administration etc tool are all very well opening. but every time I try to access windows update, it gets stuck, curious thing is that explore is not having hung or whatever it is, the Explorer appears not any message "not responding" in Task Manager either, everything else seems to work fine, except for the update of windows which is completely frozen.

  I've included a snapshot of the frozen window also...

  I tried to use the restore of the system for as long as possible, but it does not work. I want to update to windows 8.1, unfortunately I can't do unless I upgrade my windows 8 first. Please help me to solve the problem...

  Thanks in advance

  

  Hi Gray,

  Thank you for the update on the question and sorry for a delayed response.

  If the Windows Update service is missing in services.msc then I suggest you follow the suggestions provided by the suggestion of Ned Pyle and jasoncollege246 the link below.

   

  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/5a8bf018-C522-4a8e-a857-ac73f5e706ee

  Note: Follow the steps described in this section carefully. Serious problems can occur if you modify the registry incorrectly. Before you modify it, Save the registry restore problems.

  Keep us updated on the issue and we will be happy to help you.

• Some features in the Control Panel does not start

  Original title: some feauters on Control Panel do not open

  my computer laptop OS is windows 8

  When I open my control panel functions are not open

  options, troubleshooting, customization of power

  Pleas give me a few tips, how can I do to fix

  Hello Kiran,

  Welcome to the Microsoft Community Forum.

  According to the description, I understand that some features don't not throw in Control Panel. I'll be happy to help you with your query. However, let me ask you a few questions to better understand the issue and assist you accordingly.

  1. What happens when you try to start the service, as said above?
  2. You receive an error message? If Yes, what is the exact and complete error message?
  3. You did any hardware/software specific change in the computer before the show?
  4. You use any third-party antivirus installed on your computer program?

  The issue may have been caused due to conflicts between third-party software. Try these steps and see if they help.

  Step 1: Start in safe mode

  With the parameters of Windows startup screen (formerly advanced startup options), you can start Windows in different advanced troubleshooting modes, so you can find and fix problems on your PC. In previous versions of Windows, you might get to the screen by pressing F8 before Windows starts. Windows 8 PCs starts quickly, so there is no enough time to press F8.

  See the article: Start settings for Windows (including safe mode)

  Step 2: Perform the clean boot

  Put your system to the clean boot state helps determine if third-party applications or startup items are causing the problem. You must follow the steps in the article mentioned below to perform a clean boot.

  See the link to perform the clean boot.

  How to perform a clean boot in Windows

  N OTE: see 'How do I reset the computer to start normally after a boot minimum troubleshooting' to reset the computer starts normally after troubleshooting.

  From now on, try the steps above and check that if these functions of launch and let us know the result so that the answers to the questions, we will be happy to help you further.

  Thank you.