My custom brushes cannot be color Adobe provided as those pre-defined sketch.

Similar Questions

• Custom brushes can be added to one of my CC libraries?

  I created a custom template brush, in several colors (so many brushes) to use in a mast-head - according to the main color of the document. I would like to save these brushes in my library CC associated with this project and come short. Any ideas?

  Change if you use the Opt (Alt) key when you drag in the new document to the library?

• Whenever I use a brush that faded color, it is a yellow-orange color, not the color of the brush (black). Opacity is full and I have not touched anything as well level look, I closed and re open photoshop

  Whenever I use a brush that faded color, it is a yellow-orange color, not the color of the brush (black). Opacity is full and I have not touched anything as well level look, I closed and re open photoshop

  This image does not yellow-orange on my side. It seems that we have a color management problem going on here. Have you had your screen calibrated? Do you know what profile is connected to your monitor (or if a customer one has been created due to the calibration)? What you have in your color settings from the Edit menu? You have proof colors enabled in the View menu?

• Cannot change my Adobe of deleted email address ID. Account refuses to save the change.

  I tried many times to change my ID Adobe I don't receive downloads, I bought.

  When I followed the suggested procedure and change the e-mail address to an asset, I press 'save' and get a message that the address cannot be saved. It is quite circular.

  Any help will be appreciated.

  Ed ISO Brooklyn.

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• I'm trying to reinstall Dreamweaver CS3 from the CD after having computer problems.  Now get the error 'you cannot install an Adobe product at a time.  Please fill the other installation before installing... "There is no other Adobe

  I'm trying to reinstall Dreamweaver CS3 from the CD after having computer problems.  Now get the error 'you cannot install an Adobe product at a time.  Please fill the other installation before installing... "There is no other Adobe product install.  I have used the cleaning tool Adobe several times and uninstalled other Adobe products, but none worked.  I have uninstalled/reinstalled this version of Dreamweaver CD several times when changing computers and after you had computer problems. A google search of the proposed problem that there is an error related to the number of times I can reinstall this product due to licensing issues.  Help, please.

  A google search of the proposed problem that there is an error related to the number of times I can reinstall this product due to licensing issues.

  Absolutely not. You're misinterpreting things. Activation does not happen when you simply run the installer, although later. This means that what he says - there is another 'install' pending / assets on your system, which means somewhere, there is a process (invisible) always blocking things. Whatever it is, since you have not provided any real technical info, we can not advise specifically. If you are using Windows, you can check your task manager and to terminate any process setup.exe and msiexec.exe more potentially will need to manually fix / remove some registry keys. What beyond this, you will be much more accurate.

  Mylenium

• Where is saved the custom brushes?

  I have just formatted my HD but created a backup beforehand. Foolishly, I did not export my custom brushes. Where will they be in my backup?

  see you soon

  It depends on what OS you

  XP: c:\Documents and Settings\ [user] \Application Data\Adobe\Adobe Photoshop CS4\Presets\Brushes\

  Vista c:\Users\[user]\AppData\Roaming\Adobe\Adobe Photoshop CS4\Presets\Brushes\

• Custom brushes is available for iOS only? Not for Android?

  I; m a moment difficult on the contribution of the arts of vector, I can't change or customize my brush, I'm in android. But all the tutorials I see in YouTube are in iOS, they have custom brushes. Aren't you going to update the features of android, it will be useful,

  Hi Bruno.

  Features Android are a little behind the BONE so there is no brush settings in the Android version of the app yet.

  I know it won't help you now, but the plan is definitely to include them.

  Sue.

• Remove blurred overlap custom brush good spacing.

  I'm doing a custom brush I want to use to draw an extended version to create a continuous bar or beam.  I create the brush without anti-aliasing, but when I use it, it adds the aliasing.  Please see image for better understanding.   Spacing = 98 below is the image starts to overlap and creating a dark seam at the joint of the spaced brush.  I want it to be a smooth transition.

  Any help would be greatly appreciated.  -Tim

  

  If I understand you correctly, you have defined a predefined brush that looks like this:

  

  And you want to caress perpendicular to its long side?

  You see a small gap with spacing set to 100% (the entire width of the brush).

  

  With a spacing of less than 100% of the brush overlaps, the value and more than 100%, you get a gap?  It's exactly what you expect.

  With spacing set to 20%, you would see a stepping

  

  And 1% deepening disappeared, but so has the gradient

  

  But if you set the spacing to 1% and reduce the flow of brush down to 5%, you start to get what I think you're after

  

  You might had feathered the sides of the brush, like this

  

  That would have given you a chance to get the result with spacing of brush, but it's still pretty tedious. The best I could do was with spacing set to 39%

  

  Without knowing exactly what you're trying to create, you have to guess, but I suspect that the brush motor may not be the best tool for this.

  Good luck

• Expansion of the custom brushes creates several objects

  Hi guys,.

  I'm working on an illustration and I used brushes custom, I did to expose the sketch, but I notice that when I develop the paths, each line gets divided into a bunch of objects as shown in the screenshot below.

  It seems to be slowing down the program massively and is also very convenient for storing the line drawings. Is this something to do with the brush settings? Is there a way to solve this problem, so each brushtroke is just an object?

  Thanks for your help!

  

  What do you see if you drag your custom brush from the brushes to the artboard Panel and watch mode plotted?

• Illustrator export to PSD causing of custom brushes to look "rough".

  Hello

  I've recently updated to version 2015.3 of Illustrator and now when I export my files .ai to one. Lines PSD with a custom brush applied pattern look jerky.

  I reinstalled the old version and one is doing the same thing. I enclose some images to illustrate (large images to view details).

  Any ideas or help would be greatly appreciated

  Screenshot of Illustrator

  

  Screenshot of the file exported before update of 2015.3

  

  Screenshot of the file exported after update 2015.3

  

  Screenshot of brush model parameters (these have not changed and I have been using these since Illustrator CS 4)

  

  I exported CMYK and maximum editability.

  You don't need "regular" and the artistic forms. You can do this with only artistic shapes.

  

• How to make a clipping with a custom brush mask?

  Hello

  I don't know if this is possible in illustrator, I'm still learning. I made a custom brush style smoke and I would cut it in an exact form. I was wondering if there is a simple way to do it, either by using a clipping mask or using a met

  The top layer is a shape made out of expanded trails, I also do a compound path. The second layer is made of paint brush strokes, I ungrouped them.

  

  Any suggestion would be appreciated to mush, I learned a lot on these forums.

  Thank you

  Bell

  The mask object must be on top.

  Then select all and object > clipping mask > make

• Transfer of custom brush

  I want to copy my custom brush, (watermark) from one computer to the other.  What are the steps to transfer the custom brush (not screened) to a flash drive?

  Go to the preset manager, click on the brushes tab, select the brush that you want to save, click Save to save simply selected a file ABR brush.  Copy this file to the other machine and load it into Photoshop.

• I need to contact ADOBE customer service, I just bought adobe photoshop and elements for windows first, but I have a Mac. Can I change the purchase? Thank you. Mauro

  I need to contact ADOBE customer service, I just bought adobe photoshop and elements for windows first, but I have a Mac. Can I change the purchase? Thank you. Mauro

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...

  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Get help from cat with orders, refunds and exchanges (non - CC)

  http://helpx.Adobe.com/x-productkb/global/service-b.html ( http://adobe.ly/1d3k3a5 )

• How to change the url link that Slate Adobe provides when you publish your project

  Slate Adobe - I would like to change the url link that Slate Adobe provides when I publish my project... Is it possible

  Hello

  I suggest you view the query on the forum of users of slate: https://feedback.photoshop.com/photoshop_family/categories/photoshop_family_adobe_slate

  Kind regards

  Sheena

• El Capitan is a problem? You cannot open the "Adobe after effects CC 'application because it is damaged or incomplete

  I downloaded After Effects for 30 days, and when I want to send this message appears "you cannot open the"Adobe After Effects CC 'application because' it is damaged or incomplete. (in fact, I speak Spanish, I just translated it...)
  I have OS X El Capitan, maybe that's the problem? How can I solve this problem? Help! Thank you

  First, see if the update to the fixed bug Mac 10.11.1 will help you

  -an exchange of views of 10.11.1 https://forums.adobe.com/thread/1986008

  He has problems with Mac 10.11 El Capitan... which is perhaps one of them

  See answer #5 in https://forums.adobe.com/thread/1965850 for several solution links

  -the first link that the answer is a possible solution to install problems

  -There is also a link on the video display problems in Premiere Pro

  - and many other programs... MORE Microsoft Office also has problems