I'll be able to use iWork ' 08 with El captain?

Similar Questions

• Norton and 35 of Firefox are not compatible... I ran Norton Live Update... If Norton is up to date. Why am I not able to use my Norton with Firefox toolbar...

  Why am I not able to run my toolbar on Firefox version 35 Norton. I ran Norton Live update... don't give me good results. I have been using an older version of Firefox... Norton is compatible for a while and all of a sudden become compatible... is not acceptable. I don't usually update FireFox immediately due to problems of this kind in the past, but Firefox likes to take over...

  I'm at the point where I feel like forget Firefox and switch him permanently on explore...

  So frustrating.

  I have the same problem. Norton Support just spent 1.5 hours trying to get v35 to accept it is the latest toolbar (v 2014.7.10.12) on my computer that they - Norton - say IS COMPATIBLE WITH the V35. They suggested that I have than uninstall/reinstall Firefox, which I did. It made no difference.

• Questions of the C300. Is no longer able to use the first with these files

  After a week of frustration and try to import files C300 I am about to give up the creation and return to Final Cut Pro 7.

  It seems Adobe have updated to the point of breaking the c300 workflow.

  If anyone can give a method to sort it I would be very happy, but it became unusable.

  I am told that the method is to use "Media Explorer" to import.

  So I open first, select "Media Browser" in the window menu, and then go to my files. Once in the C300 directory "Direcotry Viewer" pop up allows me to display the directory to the Canon XF format. I select who and then it reads the card in the form of a series of. Clips MXF. I select all the clips and right-click. import.

  All very well so far, however files that are split between 2 or more MXF clips come as lasts only 30 seconds.

  It started only hapenning this week and the only solution I got is to use "Media Browser".

  Can someone explain what I am doing wrong please?

  Can I assume that this only happened right after the upgrade?  If so, and your time is near, is it possible to roll back to the version that worked and resume business as usual?  I know what can go against the ongoing subscription model, but the model of continuous update goes against the model of stability, hard wrought by decades of never fix anything if she has not broken.

  I also shoot with cannons and I use their XF utility to ingest/export to MXF (no file - just the video file) file via a card reader.  I can import directly into a tray without problem.  However, I'm still on 2014.2 and especially probably will stay there until something breaks and I have to spend.

• Not able to use moving backward with Quiz?

  I built quiz questions in the presentation. When you get to the first

  quiz question and you want to review the documents before answering the question of the quiz.

  Captivate 5 allows to move you backward; However, when I return the question to answer is said: "you did not answer the question completely" and he does not select an answer.

  I checked my preferences and I did not "allow the selected motion. I was wondering if anyone knows what I'm doing wrong?

  If at first, it may seem confusing, there is a reason behind this behavior.  Captivate has what is called a range of Quiz that starts with the first marked object and ends at the Quiz results slide.

  If allow a movement backward is not selected, you enter once the scope of the quiz, you can not go to any slide before it.  Allowing a moving backward allows you to keep out of reach of quiz, but as you've found, it also means that quiz questions, you have already visited will be locked.  If you do not answer on the slide, you're question is locked as having not replied.

  The solution to your problem is to extend the scope of quiz to all slides containing information that your participant of the course might want to display.  You can do this by placing a button or clickbox on a previous slide in your project.  Set it in relation to the Quiz with a score.  The extent of your quiz starts now with this interactive object, not to the first question of the quiz.

• Using the output with 6009 or 6216 possible buffer?

  Hello

  I have a USB6009 and a USB6216. I need to generate a signal by using the analog output and I would use the output buffer. My questions are:

  -The USB6009 has an output buffer? I always get an error, but I know from experience that this device is very limited, so I wonder if they have not only an output buffer... (Programs in input buffer are not a problem at all).

  -J' took the USB6216 and I tried the example WfmGenUp.c downloaded from somewhere in the area of the developer (sorry I lost the link but fix the code) but I am not all analog output signals and after you press ENTER to stop the program (depending on the show) I get this error message:

  NO MORTALS RUN - TIME ERROR: 'WfmGenUp.c', line 113, col 9, id thread 0x0000088C: DAQmxStopTask function: (is-200016 return value [0xfffcf2b0]). Measurements: On-board memory precision passing. Due to the limitations of system and/or the bandwidth of the bus, the driver could not write data to the device fast enough to track the rate of output of the device.  Reduce your sampling rate, change the method of transfer of data (from interruptions on DMA), use a product with more on-board memory or reduce the number of programs that your computer runs simultaneously. Task name: _unnamedTask<0> Code of State:-200016

  I don't know if the problem is just that the 6216 does not support the output buffering or the other...

  -So, if the output control is not supported by 6009 or 6216 what would be the best way to constantly generate signals to 100 s/s?

  Thank you very much

  Kristel

  Hi Ryan,

  the USB-6009 case has 150 s/s softwaretimed AO, so you won´t be able to use AO stamped with the module.

  The USB-6216 supported in the analog output buffer, just follow the recommendations that the driver gives you,

  for example by reducing the sampling frequency, if there is an overflow memory due to the limitations of system and/or the bandwidth of the bus.

  Experiment with the parameters and the basic to see in what range of sampling it works.

  You can find appropriate examples

  ANSI C:

  C:\Dokumente und All Anwendungsdaten Users\Dokumente\National Instruments\NI - DAQ\Beispiele\DAQmx C\Analog Out\Generate Voltage\Cont Gen Volt Wfm - Int Clk ANSI

  LabWindows CVI:

  C:\Dokumente und Users\Dokumente\National Instruments\CVI\samples\DAQmx\Analog Out\Generate Voltage\Cont Gen Volt Wfm - Int Clk Anwendungsdaten All

• keep getting error code0x8ac70013 when I try to use my webcam with live messenger

  When I try to connect to a webcam conversation I get code0x70013 error... help please

  Hello

  1. is the issue limited only when using webcam with live messenger?
  2. What is the operating system installed on your computer?
  3. are you able to use the webcam with any other application?
  4. don't you make changes to the computer before the show?
  5. What is the brand and model of your Webcam?
  6. the drivers for your Webcam is updated?
  7. what version of Windows Live messenger you are using?

  Please follow the steps below.

  Method 1:

  Run the troubleshooter mentioned in the link below.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2:

  If you have installed McAfee SiteAdvisor by chance this is a known issue.

  Click on the link below.
  http://service.McAfee.com/faqdocument.aspx?ID=TS100601

  I would say also, please contact Windows Live Messenger forums.
  http://windowslivehelp.com/forums.aspx?ProductID=2

• I'll be able to use the Apple Watch for two weeks before the arrival of my new iPhone?

  My watch will happen before my iPhone. I'll be able to use it for the basic functions such as read the time and counting took place before my phone arrives?

  Hello

  No, I'm afraid not - you only will be able to set up your Apple Watch after having coupled with your iPhone.

  Set up your Apple Watch - Apple Support

• I would use Yuanti SC police for my web development project. However, my developer is not able to use the file .ttc I extracted from the library of fonts, and .ttf, .otf .woff formats not available anywhere on the web.

  I would use Yuanti SC police for my web development project. However, my developer is not able to use the file .ttc I extracted from the library of fonts, and .ttf, .otf .woff formats not available anywhere on the web. Please, let me know how can I use this font for my project.

  Thank you

  Anton

  Unless the site you develop is for the Asian market, I don't know why you want to use that particular font. The Basic, standard and digital alphabet punctuation glyphs has sans serif, Roman characters, but the rest is thousands of Kanji characters. While you can use the font .ttf and .otf and web fonts, it would be very unusual to use one so great. Pages should load quickly and 78 MB, with a value of faces to download for those who have connections slow Internet is not fast.

  I would take a different font without serifs. There are literally thousands who look identical or virtually identical to Yuanti.

  131 free and high quality without font serif to choose here. I'm sure you can find a desired.

• How can I configure on a second two-factor authentication apple that isn't an icloud but rather my itunes account account ID? Only, I seem to be able to use two steps on the second account.

  How can I configure on a second two-factor authentication apple that isn't an icloud but rather my itunes account account ID? Only, I seem to be able to use two steps on the second account.

  You can not. Two Apple factor authentication is a feature of iOS and OS X, based on your AppleID being associated with iCloud account to send and receive authentication 6-digit codes. An AppleID that is not associated with iCloud account cannot be used for 2-factor authentication.

  For Apple ID - Apple Support two-factor authentication

  You can set up validation in 2 steps (which is different) with any AppleID - see frequently asked questions about check in two steps for Apple ID - Apple Support

• Printing labels direct mail from a worksheet using iWork 09

  I know how to use iWork 09 to perform a normal mailing.  However, to print mailing labels, I have to say that each label is NOT a new page.  By example, if I use 2 "x 4" labels, I need to print 10 labels on each physical page.  Is this possible?

  Thank you.

  If you do not find a way to do it with Numbers/Pages (I don't know of a way, but I do not know much Numbers/Pages), you can download and install Avery Design and printing software. You can save the data of numbers in an Excel format and then import them to the Avery software: http://www.avery.com/avery/en_us/Templates-%26-Software/Software/Avery-Design--P rint.htm

• I need to export contacts as vCard iCloud to able to use android phone, but it does not work

  I need to export contacts as vCard iCloud to able to use android phone, but it does not work

  Help, please

  We need more than "does not work" to be useful.

  How do you try? Is there an error message?

• Not able to use 4 G network Reliance Jio on iPhone 6

  This cellular network has not been certified by the carrier for LTE on iPhone. Battery life, calls, SMS, voicemail and cellular data may be affected. »

  After going to setting-general-carrier-version is 24.1jio and I am using iOS 9.3.2

  There is still no bar to network and I'm not able to use 4G on the iPhone 6

  Apple model 1549

  Please help as soon as possible

  Help what? This carrier does not support LTE on the iPhone. There is nothing we can do about it. Complain to your carrier.

• The new MacBook with touch of force will be able to use the pencil to Apple?

  The new MacBook with Force Touch will be able to use the pencil to Apple?

  N ° of Apple pencil only works with iPad Pro (the iPad Pro is sold in two sizes).

  Use the pencil to Apple with iPad Pro - Apple Support

• I bought an iphone 4 on ebay but it's locked, icloud so I am not able to use it, and the previous owner is available to remove the device from their account: How can I use the appliance?

  I bought an iphone 4 on ebay but it's locked, icloud so I am not able to use it, and the previous owner is available to remove the device from their account: How can I use the appliance?

  You can not. Try to return the unit and get your money back. There is absolutely no way for you to unlock the device,

• I changed my ISP from at &amp; t to time warner cable, I will be able to use firefox in the same way?

  I will be able to use Firefox in the same way after I change my ISP from at & t to time warner cable?

  NoScript is essential. Windows 7 firewall is good. For antivirus, etc., I'm under maximum security from Trend Micro. The price is high, but it usually substantial discounts are available. Some ISPs now offer free versions of Norton or other software, but I don't know about Time Warner.