My DAQ PCIe6361 cannot be programmed through my labview8.0

Similar Questions

• cannot open programs by right click and run as administrator

  had a virus earlier today, I think it was the security of windows one... anyway I got rid of it with malwarebytes and restarted my computer. now, for some reason, I can't run programs without going through a right-click and run as an administrator.
  When I try to run normally (left-click) I get this window "open with."
  I'm not very good with technical terms, but I tried several fixes that have failed

  When I right click, open properties, then open the tab compatibility... "run this program as Administrator" button is grayed out so I can't do anything with that.

  turning UAC enabled or disabled dosent seem to do anything.

  Some programs are completely inaccessible, (like microsoft word)

  I also watched regedit but as didemt not a lot of sense to me at all. If anyone could break how to fix this step by step before reinstalling the DVD (which I did not), you will be my best friend

  EDIT: I followed this link of early wich looked like the same, but the link of download in the best masculine seems to not work
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/cannot-open-programs-unless-run-as-administrator/e939ba45-c6ab-499d-AB21-433e7314d344

  Hello

   

  Method 1: Disable the security software and verify afterwards; Follow the steps mentioned in the link below

  Disable the antivirus software

  If you use a non-Microsoft security software, you can check the documentation provided with the program to achieve this.

  Important: Activate security software once everything is done.

  Method 2: When you run an .exe on a Windows Vista-based or Windows 7 computer file, the file may start another program

  http://support.Microsoft.com/kb/950505

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you follow

• Cannot download programs and basic games after recovery.

  Programs Application Applications Apps game games Legacy Crash crashes Hang Application Compatibility hangs

  All of a sudden we cannot download programs of basic games, after recovery we cannot not even down load dap download eccellerator!

  can help us, that's happened is that during the last 5 days.

  Hi Eric,.

  Chances are, something happened during the recovery process that prevents you from downloading something on the internet. One of the most common reasons for this is that the security settings are set too high. See the link below to learn how to change the security settings.

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-Internet-Explorer-security-settings

  Another reason that you might not be able to download whatever it is could be the settings you have enabled in your anti-virus program, if you are running one. If you are, try to disable the program while you download those

• broadcast another program through labview

  Hello

  I have a question

  is it possible to broadcast another program through LabVIEW?

  for example, I run a program in my computer, is it possible to have the remote people to look at how the program runs through the Internet and LabVIEW?

  Thank you

  Cynitha

  Yes and no.

  Yes - if you are showing them how to use a VI that you configured as a server, they can watch using remote façade. There are also (limited) ActiveX controls that allow you to use external applications in LabVIEW, IE: Word, Excel, WMP, etc.

  No - if there is no involved VI, you want to just show them a random program, you can simply use Remote Desktop connection. Click Start > programs > Accessories > Remote Desktop Connection, its fairly explicit use.

• Web site cannot disply programming page error

  Original title: network map

  I have printed information: workstation because I got in trouble and can't seem to fix.  My computer information - status under Hardware page, network card, the State is not supported, and it is recommended that 'looking for pilot."  I did, and came a message indicating "web site cannot disply programming page error?  How can I fix?  He then shows in Network Diagnostics, network adapters, Intel(r) PRO/1000 PL Network Connection (FAILED).  Connecting TV/video of Microsft says (SUCCESS).  What can be done to change this?

  Hello

  ·         You will remember to do recent changes on the computer before this problem?

  I suggest you follow the steps from the following link:

  "Internet Explorer cannot display the webpage"

  http://support.Microsoft.com/kb/956196

  I hope this helps.

• Cannot receive emails through my Outlook Express 6 account all of a sudden. I have 2 computers set up with it, a Windows XP and the other Windows Vista.

  Cannot receive emails through my Outlook Express 6 account all of a sudden.  I can send messages but not receive. I removed all mail rules and blocked senders and I still cannot receive anything.  I tested it by sending a mail to it through different accounts (gmail, yahoo) so I know that there must be some messages.  I also had people reply to my email that I send to what they do, but I don't get their answers.  I have 2 computers in place, using Windows XP and the other is Windows Vista.  I've never had a problem until now. Any help?

  My server contacted me and told me to check my spam using their webmail account, because it was full.  It seems that when I used the rules of the mail I had clicked on delete from the server, just "do not download".  My spam folder was so full that I couldn't receive. Thanks for all your advice!  Mark as resolved.

• Get the error code: 0 x 80041003 in Event Viewer. Events cannot be delivered through this filter until the problem is resolved

  Original title: - what the heck is - this?

  Can someone tell me what this means - in English?

  Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace '//./root/CIMV2' because of error 0 x 80041003.» Events cannot be delivered through this filter until the problem is resolved.

  I get this topic once per hour in my diary of events 'Application '.  The Source is: Microsoft-Windows-WMI and the event number is: 10

  Every word is understandable and I know what they mean, but how they are threaded and beat me to the syntax.

  Bill

  Thanks for the reply, Gerry.  I'm no stranger to computer, having started in 1962 in the Navy for 20 years.  The HD is fine.  I used the Hitachi software testing to verify this.  RAM is also fine after running MEMTest for about 17 hours.  CHKDSK shows up at all no error.

  I agree it could be caused by a hardware fault and looking for that I ran some tension and trials of O-scope on the motherboard.  The only discrepancy I found was Aida64 Pro told me that the 3.3V rail was only 1.75 v.  My DS was told that the rail was 3.327.  This led to the conclusion that maybe the sensor was messed up.  I have an almost identical computer with a motherboard in the same series and Aida reports that rail even as 3.319v.  So, I think that the motherboard may be offset slightly.

  The re - install is an easier way to remove a large number of applications I just didn't need more and had not touched in over a year.  Revo even would have struggled to clear the registry after such massive uninstall.

  I found that the results from a command prompt is quite easy if you issue the command once, read the results on the screen, and then do it again but to redirect the output to a text file ("' do_whatever > test_output.txt '").  All you have to do is cop0y and paste a post.

  This re - install and the subsequent installation of SP2, seems to have solved the error of the event: for now.

  Bill

• Event 10, WMI and error 0 x 80041003, events cannot be delivered through this filter until the issue is resolved.

  Original title: that the error of the Devil: the 10, WMI event

  Log name: Application
  Source: Microsoft-Windows-WMI
  Date: 22/02/2013 20:23:43
  Event ID: 10
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: INTL
  Description:
  Filter event with the query "SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99" could not be reactivated in namespace '//./root/CIMV2' because of error 0 x 80041003.» Events cannot be delivered through this filter until the problem is resolved.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      10
      0
      2
      0
      0
      0 x 80000000000000
     
      2515
     
     
      Application
      INTL
     
   
   
      ./root/CIMV2
      SELECT * FROM __InstanceModificationEvent WITHIN 60 WHERE TargetInstance ISA 'Win32_Processor' AND TargetInstance.LoadPercentage > 99
      0 x 80041003
   
  

  Anyone know what the h___ that's it?

  Hi Al Adams,.

  Thanks for posting your question in the Microsoft Community Forum.

  Based on the information, you receive the event 10, WMI and error 0 x 80041003 on Windows 7 computer.

  It would be useful that you can answer these questions to help you best.

  1. when exactly you receive the error messages?

  2. you remember changes to the computer before the show?

  This problem occurs if the WMI filter is accessible without the necessary permissions. To resolve this problem, refer to the article and try the steps:

  10 event ID is logged in the application log after you install Service Pack 1 for Windows 7 or Windows Server 2008 R2

  It will be useful.

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Error: Cannot run program "jar": CreateProcess = 2 error

  Hi all

  I create a BlackBerry App... All this worked fine until there are times... Now when I agin tried to run during the packaging of the app has been mentioed below error...

  "Error: cannot run program"jar": CreateProcess = 2 error, the system cannot find the file specified."

  Why it is so? Please help me...

  Best regards.

  You can search for java 7, I had problems with it and re-installed java 6 for bb dev.

• Error: Cannot run program "jar": CreateProcess = 2 error, the system cannot find the file specified

  Hello

  My apps works very well for the current code, but if I add a new function or class in my eclipse application code indicates the error of

  Error: Cannot run program "jar": CreateProcess = 2 error, the system cannot find the file specified

  I searched the forum and google for this problem, certain solutions are related to java path but myjava path is ok as the current code works very well

  So what problem here? and whats solution for that?

  
  

  

  has got the solution to the problem of its need for .jar files path previously I did not understand why he neede path of pot now his reason is here

  http://supportforums.BlackBerry.com/T5/Java-development/I-O-error-cannot-run-program-quot-jar-quot-C...

• [HELP] I/o Error: Cannot run program "jar": CreateProcess = 2 error, the system cannot find the file specified

  Hi, I'm new developer on the Blackberry platform.

  I make the first application, but there is a problem when I wanted to install in the Simulator.

  My application has several screen and each take the server data, analyzing the data and displays on the screen.

  My problem is any executable thread.

  When I'm using the code below, it is fine. My application can work perfectly on a simulator.

  public TestingScreen() {
     // Runnable thread = new Runnable(){
     //   public void run() {
      // TODO Auto-generated method stub
          // my code get data from server
          Dialog.alert("Hii");
     //   }
     //};
     //new Thread(run).start();
  }
  

  but, if you use floor area or UiApplication.getUiApplication (.invokeLater), I got error "i/o Error: cannot run program"jar": CreateProcess = 2 error, the system cannot find the file specified"

  public TestingScreen() {
     Runnable thread = new Runnable(){
        public void run() {
      // TODO Auto-generated method stub
          // my code get data from server
          Dialog.alert("Hii");
        }
     };
     new Thread(run).start();
  }
  

  I have the 11 screen and all have executable statement and works perfectly. Can run in the Simulator, can get data from the server. But when I create the new #12 screen (copy paste other on-screen), page couldn't use an executable statement. Each I use Runnable/thread, I got error. But when I remove an executable statement my work normally requires.

  I already have Google but I do not get the answer.

  Please advice. Thank you very much.

  Kind regards.

  hrnt, thanks for your answer on this issue. It helped me solve my problem as well.

  Just to add, for someone else, I use the 32-bit and changed Java SDK my way to the bin folder where the SDK was installed.

• I/o Error: Cannot run program "jar": CreateProcess = 2 error, the system cannot find the file specified

  I/o Error: Cannot run program "jar": CreateProcess = 2 error, the system cannot find the file specified

  Why is the error, how to fix?

  File jar.exe. For example, I have a copy of it in C:\Program Files (x86)\Java\jdk1.6.0_24\bin

• PhoneGap: Cannot run program "C:\Program": CreateProcess = 2 error

  Hi all

  I built my app without problem until now, but now, when I try to build it, I get this error:

  build:
       [exec] [INFO]                      Parsing command line options
       [exec] [INFO]                      Parsing bbwp.properties
       [exec] [INFO]                      Validating application archive
       [exec] [INFO]                      Parsing config.xml
       [exec] [INFO]                      Populating application source
       [exec] [INFO]                      Compiling BlackBerry WebWorks applicatio
  n
       [exec] I/O Error: Cannot run program "C:\Program": CreateProcess error=2, E
  l sistema no puede encontrar el archivo especificado
       [exec] [ERROR]                     RAPC exception occurred
  
  BUILD SUCCESSFUL
  Total time: 27 seconds
  

  The Spanish part of the error is labeled "the system cannot find the file specified."

  I added in the "path" environment variable JAVA_HOME %

  I tried to edit bbwp.properties to change "Program Files (x 86)" to "progra ~ 2" but it fails not before. "

  I have updated java a few days ago and I think it is a problem with spaces in the path of "Program Files" (x 86), but I don't know where is the file that contains the path that is the cause of the problem.

  I tried with - verbose during construction, but it does not help.

  Can you help me?? a solution or trick to solve this problem?

  Thank you very much.

  Thank you all,.

  Java 7 is installed (32-bit), I had, I had a variable JAVA_HOME pointing to the latest version installed and %JAVA_HOME%\bin got in my way, but it failed with all this.

  I've solved an "easy" way I downloaded the latest versions of ant, java and the sdk webworks and them reinstalled in c: in a path without spaces. I changed the value of the variable JAVA_HOME and path in the file project.properties pointing to the new and everything worked as before.

  Hope this can help someone.

  Thank you for your support.

• I/o Error: Cannot run program "C:\Program": error CreateProcess = 87 using ant

  Hi guys,.

  I'm trying to build my console application using Ant. It is a part of my build.xml

  When I try to "build Ant" I get this error returned:

  I/o Error: Cannot run program "C:\Program": error CreateProcess = 87, the parameter is incorrect

  referring to this line:

  I tested the names of directory and environment variables all (the variable

  ${46.jde.home}
  

  too) is set correctly, but the error is still there... How could I solve this problem?

  Thank you very much

  Sometimes, the length of the path give birth this error but I have not seen in a while. I ended up installing most of my OCD: \RIM apps to avoid path issues all together.

• Cannot install programs as an administrator

  I'm trying to install the HP printing software.  I am the administrator, but get message administrator can install only.  I have a click with the button straight on the installation icon and click on run as administrator, but I get the same message.  What should do?

  Question? You are trying to install the HP software is from a disk? If so you will need to go to the HP website and download the program through them more than likely that the software you have is too old for use in Windows 7. Another Question? What OS you are running (32-bit or 64-bit)? If the drivers on the disk are 32-bit, and you try to install a 64-bit system, it won't work; you need 64-bit Windows 7 or Vista 64-bit drivers to install your printer. If you think that the disc is just, only then you can always try compatibility mode. For this right click the set.exe the file on the disk, then go to properties. Here click on the Compatibility tab, and then use an older operating system to install. You can also press the box run as administrator, skip the step of right click again to run as administrator. I always think that the best is to go to the HP website and download your driver online the value of their stock.

  Let me know