broadcast another program through labview

Similar Questions

• C7280 - cannot scan. Error message indicates another program has control over the device

  I open the HP Device Manager to do a scan. I accepted the parameters and the scanning started. But the part passing through the analysis, I stopped the scan that I realized that I wanted to change the resolution. I leave the Manager device and rebooted but when I did, I got to tell an error message:

  'Cannot perform the function you have requested because another program has control over ice dev'.

  I have nothing else open and so I can't work on what program has control over the printer.

  C7280 Prtinter. Mac OS x 10.7.

  The Device Manager has not been updated for Lion and there is still no specific Lion software for your printer.

  So far, you have the choice of scanning with picture Capture or preview.  I'm sorry.

• How to collect data on the programs of LabView and VC ++ at the same time?

  Hello

  There are two programs in LabVIEW and another is in VC ++. The two programs to collect hardware data.

  Therefore, for the experience, it is necessary to begin to collect data at the same time and lag must be

  less than millisecond (it is essential for the experience). How can this be achieved? BTW, I'm new to LabView.

  I think on the use of network socket to get the message for both applications.

  I was wondering if there is a better way.

  Thank you.

  MARK002-MAB wrote:

  Hello

  There are two programs in LabVIEW and another is in VC ++. The two programs to collect hardware data.

  Therefore, for the experience, it is necessary to begin to collect data at the same time and lag must be

  less than millisecond (it is essential for the experience). How can this be achieved? BTW, I'm new to LabView.

  I think on the use of network socket to get the message for both applications.

  I was wondering if there is a better way.

  Thank you.

  You do not say if two programs access the same material, but I guess not. Because if they did, you probably get conflicts when the two programs try to access the same material at the same time.

  In either case, the only really reliable way to ensure that your needs of< 1ms="" would="" be="" hardware="" triggering.="" one="" hardware="" unit="" is="" programmed="" to="" provide="" a="" hardware="" trigger,="" typically="" a="" digital="" signal="" and="" the="" other="" is="" programmed="" previous="" to="" the="" desired="" start="" point,="" to="" wait="" for="" that="" trigger="" and="" start="" automatically="" when="" it="" is="" received.="" if="" both="" hardware="" units="" are="" ni="" daq="" cards="" you="" can="" do="" that="" fairly="" easily="" using="" the="" rtsi="" bus="" or="" in="" case="" of="" pxi="" the="" pxi="" trigger="" lines.="" if="" they="" are="" different="" hardware="" then="" it="" can="" get="" more="" complicated="" to="">

• What I need to install in another pc without LabView and wants use executable Vi

  Hi, everyone, please, help me

  I want to use another VI without LabVIEW PC executable, what I have to do to run the VI.exe?

  Thank you

  At a minimum, you will need to install the LabVIEW runtime engine.

  You may need to install more depending on what your program does.  Maybe the drivers DAQmx or the VISA run-time.

• How to select the path of data through labview

  Hello gurus...
  I'm new user in labview. I want to read and write to the database via labivew. I have
  read and write the program. Now, I want to choose the way of storage of data through labview.
  I tried different ways, but I couldn't.
  First of all read and write the program I did via the UDL file path. Now, I want to choose ".mdb" file path directly.

  I do not know how...
  So if you know please help me...
  Thanks

  Concerning
  Joel M
  India

  Rather than trying to create an Access database, I have simply included a blank database with the installation.  Open, build the tables as required (as your example shows), and then copy (using the copy of the palette of Advanced File i/o) whenever you need it.  Your program will need to know where it is, therefore, store the connection information in a configuration file (as already mentioned) is a possibility.

  Here's how to use a connection string to open a database:

  

• Try to remove a CD image file, get the error message "this action cannot be completed because the file is open in another program.

  I am trying to remove a file from CD image (.img) of my office

  When I try to put it in the bin I get the message

  "The action cannot be completed because the file is open in another program close the file, and then try again"

  First, I checked the obvious things like if the .img file was mounted in a virtual drive - it isn't so I then used LockHunter to find which application is using the file so I can close by the Task Manager.

  Unfortunately LockHunter told me that the file is used by 'System' - which cannot be closed through the TM.

  Any help?

  The problem is that the program that allows you to mount the image always uses the image.  In my case I used the magical disc. Go to the start menu find the magic disk or folder folder, there should be an option to uninstall the magic disc. I tried UN-installing conrtol add and remove programs but it wouldn't let me. You can also click on computer in Start menu and see if the file you want to remove is always mounted (appears as a CD image). In this case that you can click the eject disc hit.

• "The player (disc / E :) is used by another program)" Nope.

  "I was about to burn a few cases hidden information sensitive on a CD - R, but initial development right after disk shaped, I suddenly have an alert pop up telling me that the disk drive" is used by another program. "Well, it does not seem, on the surface, and certainly not through any action on my part I W - Vista HP SP-2, with MS Secur. Active essentials, running behind the firewall of the router to a little ordinary. I haven't used the drive E: to what it is today since bringing my laptop from hibernation. There's zilch other clients on this network, as me, home. I've never seen this before alert when using the operation and common sense of burning Windows CD told me to be careful, even if MSSec. Essen. report something when I specifically disk for malware analysis, but I don't know what it is are limits.  Please help, thanks in advance!

  Hello

  You have installed any other software burning CD on your computer?

  If so, then uninstall the software and check if it makes a difference.

  In addition, perform a clean boot to verify if a third party application or service that runs in the background is in conflict with the burning process.

  Refer to this article for more information on the clean boot.
  http://support.Microsoft.com/kb/929135

  NOTE: Please check that you start the computer in normal mode after a repair. Followstep 7 of the above article.

  Kind regards
  Afzal Taher - Microsoft technical support.
  Visit our Microsoft answers Feedback Forum and tell us what you think.

• The action cannot be completed because the folder or file is open in another program

  in my c... home users... drive a folder got locked... when I try to delete this folder

  his message display

  "The action cannot be completed because the folder or file is open in another program."

  I connected to internet through router... is this a problem for... this

  Please

  answer me someone

  Can you please ensure that no other program is using the file to remove or using all the files inside? For example, if you have the Windows command prompt open in the location of your file, you will not be able to remove it.

• "File in use: the action cannot be completed because the folder or file is open in another program" when you rename a folder with Thumbs.db inside

  I looked at many similar responses but no nails really our problem.

  On a Windows client 7 to rename a folder that is located on a file server running SBS 2003.  When you try to rename a file that has a file "thumbs.db" in there he throws the message "file in use: the action cannot be completed because the folder or file is open in another program. and then it won't let you rename it.  This isn't a problem with other XP clients attached to the same server.  We have reduced to folders that have this file thumbs.db in through trial and error.

  It will work when you show just the icons which is unacceptable.  However, you can rename a folder that is located on the customers own local disk.

  Suggestions - we can work around it, but it of inturupting workflow and is old fashioned all simply boring.

  Thank you

  Happy to provide system info, anyone needs

  Hi JustinEllery,

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.
  http://social.technet.Microsoft.com/forums/en-us/WindowsBackup/threads

• Error: cannot print to printer. Printer may have been canceled another program when trying to print from HP wireless printer.

  Original title: cannot print on the HP wireless printer

  Device

  message: cannot print to printer. Printer have been canceled another program.

  I'm trying to e-mail through Quickbooks and I get this message. I have a wireless HP printer (I can print invoices) and the PDF Quickbooks 2.0 Converter. (what

  Maybe the problem?)

  Hi Reymondlucas,

  1. are you able to print using other applications?

  2 did you change on your computer before this problem?

  You can follow this link & check if the problem persists:

  WARNING: Could not print to printer

  Hope the helps of information.

• Impossible to uninstall a program through programs and features

  I had a problem with an excessive amount of pop ups lately in my chrome browser and found a few basic programs installed on my laptop. I tried to uninstall the malicious software through programs and features, but when I type on uninstall or remove nothing happens, and the program won't uninstall.

  I tried to restart and uninstall then again through programs and features, but had the same result.

  Y at - it another way to uninstall programs in windows 8, or someone has suggestions?

  Moved from Forums of Windows 7.

  Hello

  For popup windows.

  Scan your Windows 8 machine for malware, if necessary using the safe mode with networking:

  "How to start Windows 8 and 8.1 in Mode safe '

  http://www.eightforums.com/tutorials/2757-safe-mode-start-Windows-8-a.html

  Download, install, update and scan your system with the free version of Malwarebytes AntiMalware and if necessary do in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  ______________________________________

  And also scan with the free version of SUPERAntiSpyware

  http://www.SUPERAntiSpyware.com/download.html

  SUPERAntiSpyware Free Edition is 100% free and will detect and remove thousands of Spyware, Adware, Malware, Trojans, KeyLoggers, Dialers, Hi-Jackers, and worms. SUPERAntiSpyware features many unique and powerful technologies and removes spyware threats that other applications fail to remove.

  SUPERAntiSpyware Free Edition does not include blocking in real time or scheduled scan.

  ______________________________________

  It is a very good program to scan your system to remove adware, etc.:

  http://www.bleepingcomputer.com/download/adwcleaner/

  AdwCleaner is a program that finds and removes the Adware, toolbars, potentially unwanted programs (PUP) and browser hijackers from your computer.  Using AdwCleaner you can easily more of these types of programs for a better user experience on your computer delete and while browsing the web.

  _____________________________________

  And just to be sure, nothing is lurking in the background:

  'TDSSKiller Rootkit Removal Utility download for free'

  http://USA.Kaspersky.com/downloads/TDSSKiller

  @@@@@@@@@@@@@@@@@@@@@@@

  For problem programs.

  Try this free Revo Uninstaller program to remove it.

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  "How-to" instructions for use are included here: read the information on the tabs at the top.

  ______________________________

  Try this "Fix - It" Microsoft to uninstall programs the problem;

  http://support.Microsoft.com/mats/program_install_and_uninstall/en

  What it fixes...
  • Registry keys damaged on 64-bit operating systems
  • Corrupt registry keys that control the update data
  • Problems that prevent the installation of new programs
  • Problems that prevent existing programs are completely uninstalled or updated
  • Problems that are blocking you from uninstalling a program through the item add or remove programs (or programs and features) in Control Panel

  See you soon.

• Make a prototype for my class of multimedia learning and back to Captivate. This idea is possible? Or should I use another program?

  Hello!

  As mentioned, I'm a bit new to Captivate. I am familiar with its basic functions - I've done a few projects already - but I like to use my homework to help guide my learning through this program.

  For my class of multimedia learning, I do a prototype for a team project that is to teach students about specific plants: how the sunlight they need space, of water, as soon as they are completely mature, etc. Using the principle of guided discovery of Mayer (for learning MM), we want to make a game for students, and this is where my work (I'm the girl who is very quick to learn a technique and has already some experience of Captivate to his credit).

  We want to do a simulation where a character receives a plant at random his MOM. She should take care of this plant based out of the student / knowledge of the player (students will have studied it that the need for plants and made a request now that knowledge in this game). He will ask questions like, "what is this plant?" based on the image. Then, "when we it put? (in the House, on the edge of the window, in the garden, etc.). "When we should he water? (Daily, weekly, never, etc..). And so on.

  I never worked with variables with Captivate and thought this would be a good opportunity to learn. I thought that I could store the responses of the student as a variable and then at the end of the game, count the numbers, and if they have reached a certain threshold, the program will say: "Congratulations!" Your plant survived! "Or... "Oh no!" Your parched plant. You don't water it enough. "Or" Oh no! " Your plant dry too much sun! »

  Another thing to keep in mind is that the plant itself will be random, and the player should hopefully get a new plant whenever they play.

  So I was wondering...

  (1) variable will help me with this project? Or am I understand the term "variables" incorrectly as it applies to Captivate? It is possible that they work differently to how I imagine - once again, I've never worked with them before.

  (2) does it be a nightmare to create in Captivate or should I learn how to use another program? (I wouldn't mind another program of learning that I can add to my repertoire of skills)

  (3) any tips for this to work? Of course, I ask you to tell me how to do this project completely.

  (4) you say that an immediate return instead of feedback delay would be perhaps better here? If that were the case, I wouldn't need to use variables at all and instead just add a slide if they got the answer 'false '.

  You're talking about how many plants for the random plant? The only way I can imagine is to use a random number generated by JS, and an advanced conditional action which shows the plant based on this number. The random number, or the name of the plant itself could then be used in conditional actions more to ask appropriate questions.

  You can create a sequence of questions for each plant and use conditional navigation to send the student to the right sequence. In this case you can use the slides default question, which will be marked and at the end assess you the total score and provide feedback based on this score. This is possible when you enable branch of knowledge, so that only the questions that have been visited by the student will take into account for the quiz score.

  It is an idea for an answer to your first question. As I have explained, you don't need really variable (perhaps a random number), but advanced authoring knowledge or share actions.

  As a new attempt, the simplest is to restart the course. Maybe I could understand an alternative approach, but not right now.

• Why Firefox tells me "another program is using the file" 1 hour after the update of Firefox, when I click on the desktop icon?

  It happened when I tried to update c. 16 to 17 as well. I had go it and download v. 18 and he told me that she had and he asked me to restart Firefox. I clicked on the "Restart Firefox" button. He closed Firefox 17. I waited an hour and no Firefox had begun. I clicked on the icon on my desktop for Firefox, and I got a window with "another program is using the file.

  The last time that happened, I had to uninstall v. 16, use Opera 12.12 to download version 17 and then installed, to have to set my preferences just a little and then I could start v. 17.

  Why update your program allows me to update, instead of downloading a new program?

  I'm on Windows XP SP3 and a very fast motherboard.

  Finally, I decided to check if my AVG antivirus or IOBit Malware Fighter software is interfering and I disabled them temporarily. I restarted and then turned off these programs and then opens Firefox. It was as usual, 17.0.1 version not updated. I went to help, on Firefox, click Find updates. Downloading updates, invited to restart Firefox, and after closing Firefox, I got the window that says that he was installing the updates, for the first time for an attempt to update to version 17 or 18. He installed the updates and restarted in fact without any problems.

  I was about to turn off all of my Add-ons for the next test. I never had to disable my AVG or IOBit before and they are the latest versions, too. AVG is the same version that allowed the update to v. 16 before. If something is different both Firefox 17 and 18, that it will not allow updates with AVG in force (or possibly IOBit Malware Fighter).

• lovely better does not work with windows vista home Premium what another program removes LSO and HOW to prevent the trackers?

  Question
  better privacy does not work with windows vista home Premium that another program removes LSO and HOW to prevent the trackers? Edit
  Details

  In current versions of Flash you can also do this via the control panel.

  • Control Panel > Flash Player, click on remove and erase data

• When Firefox in reduced and I work with another program, why does automatically optimize (pop-up) every 10 minutes?

  I use Windows 7 and 8.0.1 Firefox on a PC. It's frustrating. I like Firefox, but it keeps popping up every 10 minutes when it is minimized and I work in another program. I can't continue to use if it cannot be repaired. I just changed from 3.6 and never had any problems. In addition, no settings have been changed.

  Start Firefox in Firefox to solve the issues in Safe Mode to check if one of the extensions or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > appearance/themes).

  • Makes no changes on the start safe mode window.
  • https://support.Mozilla.com/kb/safe+mode
  • https://support.Mozilla.com/kb/troubleshooting+extensions+and+themes