My development module is not accessible, yet I access has all the others without problem. Do you have any solutions to offer me?

Similar Questions

• On laptop CD/DVD drive is not recognized/is missing. Having read the other topics, problem still not solved.

  I'm on a computer laptop gateway and my cd player does not work all of a sudden. I can eject and put CD in there and it will hum for awhile, but nothing will happen. I went to Device Manager and it is not yet listed. I read the other topics and the problem is still not resolved, please help. Also, my HKEY_LOCAL_MACHINE folder has not all folders in there, so I can't go to system/etc to delete anything because there is nothing to remove. Thank you for your time

  Hello

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers to check with the system manufacturer to see if there is a firmware or drivers for your if necessary.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• I can not print from Firefox, but can all the other browsers and applications (such as MS Word, notepad, etc.). I get a misprint on the print monitor as if it was a problem of queue.

  This is a recent development, but I can not print anything in Firefox. Printing open normally, it's going to the right printer that works... I can print other browsers and applications. It acts like it is in queue and then a printing error occurs and it will not be printed. I closed and reopened Firefox, open in safe mode, cleaned cache/history/cookies and restarted twice. Nothing makes no difference. Also tried printing from the preview before print that had the same result. I can print all other browsers and applications without problem, so it must be within Firefox.

  See this:
  
  http://KB.mozillazine.org/Problems_printing_web_pages

• For the last few weeks, firefox does not open on my computer. Internet explore and Safari opened on the web without problem. I have a Windows 7 computer.

  I don't know whether or not this began after an update.
  Thanks for your help.

  Joe G

  Hi jgorve.

  Looks like it may be better if you got a new start by uninstalling the current version and upgrade to the latest version of Firefox by following these steps:

  • Get the latest version: http://www.mozilla.org/en-US/firefox/new/
  • Uninstall your current version of Firefox.
  • Do not remove the data of a personal nature when you uninstall the current version.
  • Delete the program folder Firefox before installing newly downloaded copy of the Firefox installer.
  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  • Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.
  • It is important to remove the Firefox program folder to delete all the files and make sure that there is no problem with the files that were the remains after uninstallation.
  • Your bookmarks and other profile data stored in the Firefox profile folder and will not be affected by a relocation, but make sure that you do not select delete data of a personal nature if you uninstall Firefox.

  Hope that helps!

• How, as a network administrator, to make Silverlight available not only for me but for all the other users on my network?

  I encountered this problem yesterday during the installation of Adobe Flash Player. To solve it, I had to go to regedit and change the permissions on the four keys on each computer on my network. Once I had the solution that I was able to make the necessary changes in less than an hour and now all users on my network is able to use the Flash Player.

  I have online sought an answer to this problem with Silverlight, but came short. Any help would be appreciated.

  Thank you. Just reply to * address email is removed from the privacy *.

  Hello

  The question you posted would be better suited for COMPUTING public Pro on TechNet. I would recommend posting your query in the TechNet Forums to get help:

  Windows XP TechNet forums

• Lightroom works only with reduced funktionality. Develop module is not available.  Adobe can not find the license associated with my Adobe why identification code? Every month I pay an amount for PS and LR...

  After the upgrade to Windows 10 Lightroom works only with reduced funktionality. Develop module is not available.  Adobe can not find the license associated with my Adobe why identification code? I bought the license more than 1 year ago. Every month I pay an amount for PS and LR, and for the past 4 months I can't work. Russian support team cannot solve this problem and sent me here.

  Thank you! I reset my password, the problem was in it.

• I have an overlay in the "Develop" Module but not in the other modules. What can I do?

  I have an overlay in the "Develop" Module but not in the other modules. What can I do?

  The GPU acceleration works on some computers and not on others. If everything works properly with disabled GPU acceleration should be the parameter, you must use. The function does not in Lightroom automatically faster. I don't have a dedicated in my computer graphics. But I understand that the main advantage of having the GPU acceleration for users who have monitors high resolution.

• In CC, the develop module will not respond.

  I just removed Lightroom 5.1 and went Lightroom CC.  However, the development module will not be resonpond. At the suggestion of someone, I went into preferences and tried to disable the GPU, it too would not respond.

  Version of Lightroom: CC 2015.3 [1052427]

  License: Creative Cloud

  Operating system: Windows 10

  Version: 10.0

  Application architecture: x 64

  System architecture: x 64

  Number of logical CPUs: 4

  Processor speed: 3.3 GHz

  Built-in memory: 11671,2 MB

  Real memory for Lightroom: 11671,2 MB

  Real memory used by Lightroom: MB 716,9 (6.1%)

  Virtual memory used by Lightroom: 871,7 MB

  Memory cache size: 178.1 MB

  Maximum thread count used by Camera Raw: 4

  Camera Raw SIMD optimization: SSE2, AVX

  System DPI setting: 96 DPI

  Composition of the Bureau enabled: Yes

  Exhibition: 1) 1920 x 1080, 2) 1680 x 1050

  Entry types: Multitouch: no, built-in touch: No, built-in pen: no, touch external: No, external pen: no keyboard: No.

  Graphic processor News:

  AMD Radeon HD 7660D

  Check the supported OpenGL: past

  Vendor: ATI Technologies Inc.

  Version: 3.3.13399 context 15.200.1062.1004 the base profile

  Renderer: AMD Radeon HD 7660D

  LanguageVersion: 4.40

  Try to disable the GPU outside of Lightroom:

  Close to Lightroom. With Windows Explorer, navigate to C:\Users\ [username]\AppData\Roaming\Adobe\Lightroom\Preferences

  Open the Lightroom 6 Preferences.agprefs file in a text editor such as Notepad.

  Very close to the end of the file, there is a line that says useAutoBahn = true,- change that to useAutoBahn = false,

  Save and close the file. Now, try to start Lightroom.

  

• My performance of the Lightroom Develop Module does not work correctly.

  My performance of Lightroom is not great.  After you have installed the appropriate NVIDIA, GeForce card GTX 970 graph with 4 Gig of Ram, Windows 10 (latest version) with 32 Gig RAM and the latest version of Lightroom CC (2015.3), I am always facing update slow in the develop module image.  The software does not remember the excerpts that I created (1:1).  Whenever I click on a photo of the flows, the share of the image of being clear-> blur-> to clear, which take about 15-20 seconds.  This happens even though I have already generated previews 1:1 for all images in the catalog.  I need help to set the settings so that I can have a good experience with lightroom.

  I tried to follow some recommendations:

  1. leave a 160 Gig camera Raw Cache framework

  2. install an SSD for the start and placed the catalog Lighttroom and Cache folder under the default Images directory, under the my account profile

  3. has created a new catalog that is less than a few LIVE in size

  Posted below is my System Info.   Is there anything else I can do to make this work?  It's very frustrating!

  ---------------  SYSTEM INFO ------------------------------------

  Version of Lightroom: CC 2015.3 [1052427]

  License: Creative Cloud

  Operating system: Windows 10

  Version: 10.0

  Application architecture: x 64

  System architecture: x 64

  Number of logical processors: 8

  Processor speed: 3.5 GHz

  Built-in memory: 32717,7 MB

  Real memory for Lightroom: 32717,7 MB

  Real memory used by Lightroom: 925,4 Mo (2.8%)

  Virtual memory used by Lightroom: 1086,4 MB

  Memory cache size: 0.0 MB

  Maximum thread count used by Camera Raw: 8

  Camera Raw SIMD optimization: SSE2, AVX, AVX2

  System DPI setting: 96 DPI

  Composition of the Bureau enabled: Yes

  Exhibition: 1) 1920 x 1200

  Entry types: Multitouch: no, built-in touch: No, built-in pen: no, touch external: No, external pen: no keyboard: No.

  Graphic processor News:

  GeForce GTX PCIe/970/SSE2

  Check the supported OpenGL: past

  Provider: NVIDIA Corporation

  Version: 3.3.0 NVIDIA 359.00

  Rendering engine: GeForce GTX PCIe/970/SSE2

  LanguageVersion: 3,30 NVIDIA via the Cg compiler

  The application folder: C:\Program Files\Adobe\Adobe Lightroom

  Library path: C:\Users\Johnny\Pictures\Lightroom\Lightroom Catalog.lrcat

  Settings folder: C:\Users\Johnny\AppData\Roaming\Adobe\Lightroom

  Plugins installed:

  (1) home canon Plugin

  (2) Facebook

  (3) Flickr

  (4) HDR Efex Pro 2

  (5) attachment Plugin Leica

  (6) home Plugin Nikon

  (7) perfect B & & W 9

  (8) perfect effects 9

  (9) perfect improve 9

  (10) perfect photo Suite 9

  (11) perfect Portrait 9

  (12) resize perfect 9

  Config.LUA flags: None

  Map #1: Seller: 10de

  Feature: 13 c 2

  Subsystem: 29783842

  Revision: a1

  Video memory: 4008

  Map #2: Seller: 1414

  Device: 8 c

  Subsystem: 0

  Revision: 0

  Video memory: 0

  AudioDeviceIOBlockSize: 1024

  AudioDeviceName: Speakers (Realtek High Definition Audio)

  AudioDeviceNumberOfChannels: 2

  AudioDeviceSampleRate: 44100

  Build: not initialized

  Direct2DEnabled: false

  GPUDevice: not available

  OGLEnabled: true

  I uninstalled Lightroom CC.  renamed the Lightroom to my profile folder, rebooted the PC.  Reinstalled lightroom CC, choose to create a new lightroom catalog, any of a local session of my C:\ Image folder.  The behavior is the same.  Lightroom does not remember previews and continuous 'loading' and make turn the wheel little whenever I click on an image of the band.  It's crazy...

  You're clicking on between images in the Strip to develop? The develop module does NOT use 1:1 previews. Those that are used only in the library. Develop, Lightroom must load the raw file and return each time, this isn't a good solution to quickly go through images to work to develop. It should take a few seconds to fully make a new raw image loaded it depending on the size of your images are. If you want to speed up switching to develop image there are solutions. One is a raw cache big camera, that you already use and secondly to disable acceleration of graphics card, which, if enabled, slows down the initial loading. Finally, you must ensure that you are the 2015.3 or the 2015.1.1, and that you do not have 2015.2. Version 2 had several bugs that could slow this process terribly.

  15-20 seconds is extremely long for this process of loading in my experience. I can't get it to be slow on a much less powerful system than if the files are > 500 MB high resolution stitched tiff files. Not with RAW files (I pull a 24 Megapixel). If they are raw files, something is wrong. You have turned off the facial recognition?

• develop module will not respond to lightroom6

  develop module will not respond in Lightroom, 6 have tried to uninstall the program and the rotation of the graphics card, but this has not resolved it any ideas.

  Hi Cadete,

  Greetings!

  It could be the reason for the graphics card.

  Please try to disable the GPU in the preferences.

  Open Lightroom

  Click on edit-> preferences-> Performance or Lightroom-> preferences-> performance (MAC)

  Uncheck use graphics processor

  Click OK

  Lightroom nearby

  Reopening of Lightroom and check now.

  Concerning

  Jitendra

• Hello everyone, can someone help me... I just bought my Lightroom for Mac 6.0 and entrust. Unfortunately, development module is not active... He asks me every time to connect to with my Adobe ID... but each time, he told me that I have no inter

  Hi all
  can someone Help me... I just bought my Lightroom 6.0 for Mac et l’ai installed. Unfortunately, development module is not Active ... he asks me each time to connect to with my Adobe ID ... but every time he told me that I no internet connection. While it is true, my internet working properly. I uninstalled lightroom, updated and reinstalled my OS but still the same problem ... what to do?
  Thanks for your help.

  Hello

  Please see the link below see the correct answer.

  Lightroom 5.5 'Module Development disabled, please renew your membership '.

  Also check that you are using your Adobe ID to you connect.

  Try to rename the Gosts file to solve the internet No connection problem.

  Check errors Sign in, activation or connection. CS5.5 and later, Acrobat DC

  Hope this helps

  Assani

• DEVELOPMENT module does not all settings more.

  My DEVELOPMENT module shows not all settings: none balance white, exposure, clarity, etc. From the histogram, it climbs to the tone curve. I have a MacBook Pro late 2013 and the latest versions of OS and Lightroom. Help, please! Thank you.

  Press Cmd/1.

• Using Sansung S3, not yet possible to share all the tabs opened (using NFC) with another phone NFC. But only the a main tab, I'm currently browsing is possible.

  Sansung S3 using, Android 4.1.2 Firefox 24.0; not yet possible to share all the tabs opened (using NFC) with another phone NFC. But only the a main tab, I'm currently browsing is possible to share. It is the function of current NFC function of Firefox?
  If so, when will it feature to share all the tabs?
  Thank you.

  I don't know if we implement this. Sharing of all the tabs you have open have many security and privacy issues. Someone forget that they had a tab open, they didn't want to share or miss-clicks on the sharing of all the option.

  We are looking for ways to better share tabs with devices that are located nearby. Especially if they are on the same WiFi network.

• Cannot update apps. Impossible to reach on the adobe servers. What continues? Its bad enough I have to rent the apps now and it does not work yet. Ive turned off the firewall and my internet connection works perfectly. How to upgrade my applications?

  Cannot update apps. Impossible to reach on the adobe servers. What continues? Its bad enough I have to rent the apps now and it does not work yet. Ive turned off the firewall and my internet connection works perfectly. How to upgrade my applications?

  Hey, if the problem has finally been fixed! I thought you would like to know the solution.

  Select Preferences - network - system - advanced - DNS network - click + symbol - Type 8.8.8.8 - Ok - apply.

  That's all. Works perfectly now. Very much appreciate your help, thank you.

• I installed the free trial version of lightroom. For some reason, the develop module is just a blue screen. I tried to uninstall and reinstall. I have a new computer with the latest version of windows etc.

  I installed the free trial version of lightroom. For some reason, the develop module is just a blue screen. I tried to uninstall and reinstall. I have a new computer with the latest version of windows etc.

  Go in Edition > Preferences > Performance and uncheck CPU graph use.