my dvd will not eject
I can't eject my dvd even if I go into my computer and right-click on it. I rebooted several times, but he is still blocked. He said always windows does not. I could not save my computer in a long time, either. This sounds like a windows vista problem or a drive problem? Thank you
Hello
First we'll get the disc from the drive.
For the readers of the status bar:
Sometimes they get stuck. There is a small hole on the front of the CD drive that you can stick a
a paper clip that will release him and the reader to open.
Create a trombone in car Opener
http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htm
Open a CD/DVD player with a paper clip.
http://www.josepino.com/?open_cd-dvd_paperclip
=================================
For the readers of the slot:
Check with the manufacturer of system on how do to eject the disc.
Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">-->
http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_eject
Be careful as you may damage the player using the method below:
You may need to get the driver to work 1 However, this could still work.
http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.html
The method used on the Mac could work
http://www.YouTube.com/watch?v=wpWieIoBBrk
How to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">--->
http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330
Also have heard double tape on a credit card or play can work.
I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
Tags: Windows
Similar Questions
-
DVD will not eject! Copy of my 8MM of Sams Club videos
I had transferred three videotapes of movements families on DVD by SAMS Club. I put a disc in my Mac desk top and he can't get out. Will not respond! :-0 ! I tried and think that I downloaded the wwwvidiolan.org news, but still will not eject. Please someone help me. Thank you, Maria
You have a wired USB mouse? Have you tried holding down the click of the mouse while restarting the iMac?
-
THE CD WILL NOT EJECT BUTTON HAVING HIT REJECT BUT THE CD EJECT WONT
If you look at the drive itself, it should be a small hole that you can use a paper clip to manually eject the CD. Have you tried to manually power down/up the PC to see if it makes a difference?
I hope this helps.
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
Hello
For the readers of the status bar:
Sometimes they get stuck. There is a small hole on the front of the CD drive that you can stick a
a paper clip that will release him and the reader to open.Create a trombone in car Opener
http://pcsupport.about.com/od/tipstricks/HT/ppdropen.htmOpen a CD/DVD player with a paper clip.
http://www.josepino.com/?open_cd-dvd_paperclip=================================
For the readers of the slot:
Check with the manufacturer of system on how do to eject the disc.
Dell xps m1330 dvd drive will not eject cd inside<-- check="" these="">-->
http://www.FixYa.com/support/t2643828-dell_xps_m1330_dvd_drive_will_not_ejectBe careful as you may damage the player using the method below:
You may need to get the driver to work 1 However, this could still work.
http://www.tech-tweak.NET/2009/11/how-to-eject-STUK-DVD-from-slot-load.htmlThe method used on the Mac could work
http://www.YouTube.com/watch?v=wpWieIoBBrkHow to disassemble the laptop (Dell XPS M1330)<--- voids="" any="" warranty!="" this="" is="" an="">--->
http://ahwee.com/how-to-disassemble-laptop-Dell-XPS-M1330==============================================================
For any other problem of CD/DVD:
References to Vista also apply to Windows 7.
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The DVD player does not work after installing Windows 7
http://support.Microsoft.com/kb/975270/The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
Setup after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and the
correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry settings for your
CD/DVD drive someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays
all devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Help! Disc will not eject.
I can't get the CD/DvD drive to eject my CD on Windows Vista. Need suggestions from someone who has had this problem.
Nelson of duckI can't get the CD/DvD drive to eject my CD on Windows Vista. Need suggestions from someone who has had this problem.
Nelson of duck========================================================
If you look closely at the front of your CD/DVD drive, you should see a small hole.
If you gently insert a paper clip into the hole, you can release the drive tray.Take a look at the following article:
Laptop DVD tray will not eject - how to open a CD or a DVD player
http://www.fonerbooks.com/laptop12.htm
(should work for laptop or desktop)John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.
-
I have a blank Memorex music CD - R stuck in my superdrive drive and it will not eject. It does not seem to recognize that there is a disc inserted. Any ideas? Help - I'm a rookie.
It worked - search for "Terminal" and then type "drutil eject external" thanks for the help.
DiabloDog
-
Will not eject the disk image of firefox
The Firefox disk image will not eject if I used Firefox since turning on my mac and when I get to eject it it comes back as soon as I open Firefox, how do I get rid of him?
See:
-
Satellite Pro L100 - DVD will not turn even upward
My friend gave me an old Satellite Pro L100 PSLA4E 005009EN to look at. He acknowledges not or read the DVD. I tried using multimedia Nero, Cyberlink and VLC players, but they can't watch a DVD. A CD will play without a problem, but a DVD will not yet run abreast.
When I look in my computer it says that a TSST Corp CD/DVD TS-L632M is installed, but when I look at the edge of the disc itself, it says DVD. R/RW with lightscribe? The software is also the original software yet.
Since the downloads for this model of Toshiba page, I see that the TSST DVD - RAM drive was equipped initially to the laptop so I'm assuming that a DVD - RW was equipped afterwards?I find the hardware changes in device if Manager shows nothing. If I try to update the drivers found nothing? In desperation I tried to reinstall the drivers from the Toshiba site, but it does not help?
If this is the case why Windows XP does not recognize a DVD - RW?If someone sees something I missed please?
Hey,.
Different laptops come with a different material maybe if the laptop was supplied with this player, but in my opinion it of important either.
The fact is if DVD is not recognized it seems to be a hardware malfunction, but what you can do is cleaning the lens of the player with a Microfiber towel. Do it carefully you don't zero or destroy the lens (dust could be on the lens). After that he try again if it will recognize a DVD.
Otherwise, the disc must be replaced and contact an authorized service provider. Guys can order a compatible drive and replace it. :)
-
Some DVDs will not play on my laptop satellite
I was redirected here from this forum: http://forums.toshiba.com/t5/Drivers-and-Utilities/tsstcorp-cddvdw-su-208bb-failing-to-recognize-dvd/td-p/463603
I can't read some DVD (which will play on other computers) but some DVD will not work.
As per link above the pilot is tsstcorp cddvdw su-208bb. Tried uninstalling the drive and reboot but no effect.
I don't know my exact model. It's just a Satellite, and this is the only information I can find.It is not easy to say what may be wrong with that. Try to clean the lens and check it once more.
-
The optical drive tray will not eject
My optical drive tray will not eject. Someone else had this problem?
Thought I would ask before you contact Toshiba.
Hello
The drive is visible to the system and you are sure that the drive has power?
By the way: what model of phone you have? -
Pavilion Desktop PC p7-1414: DVD will not play video
All of a sudden my DVD will not play on my computer. DVD will play the data but not video. Check Device Manager, which States that the device is functioning properly. Insert other discs that have always played, but now they are not. Videos will play, however, on television. No new hardware installed to cause a conflict. Checking for updates for the driver, but there are no new updates/drivers to install.
Success... Thanks a lot for the downloads. I currently have 8 CyberlinkPower2Go for burning, but the best new version I guess. Maybe he would correct music hushed on broadcast television. Thanks again... you saved a LOT of frustration!
-
I have an emachine and a disc stuck in the tray, it will not eject
computer eMachine will not eject a disc
I'm sorry, but I think you're in the wrong place, this forum is about the Windows Phone 7 smartphone. Maybe try http://answers.microsoft.com/en-us/windows? (Although I don't know what an emachine, so I don't know if it uses Windows.)
-
I get the message, "DLL could not be opened", and now my DVD will not play on my HP laptop
I get the message, "DLL could not be opened", and now my DVD will not play on my HP laptop
=================================
If it is a recent issue, of what it may be worth trying
do a restore of the system at a time before everything started.See the following article:
(306084) how to restore Windows XP to a
previous state
http://support.Microsoft.com/?kbid=306084 -
Windows XP DVD with Windows Media Player problem
I have a Dell dimension3000 running Windows XP. I have an upgrade video card NVIDIA 8400 GS with memorey upgrade 2 g. I recently installed a DVD from ASUS drive, my DVD will not play on Windows media player plug-in but I bought the Corel DVD freeze and will not play. Is there a better plug-in or a solution to this problem?
Try to download the utility "Windows XP video decoder check utility.
It checks the ability of DVD to WMP encoder
-
Why my self playing dvd will not be recorded dvd?
I have a saved auto dvd that won't play on windows media player despite me download a shedding of different codecs. I don't know what the record was made in format, it comes from a canon camera recorded to a dvd player/burner. My computer is HP pavilion and it sees the drive as white, any ideas anyone please.
I have experienced and recorded the dvd, as well, the DVD - RW and DVD + R with two freewares and I'm able to play an exceptional video on my computer or DVD player. Two freewares are available on internet and their software can be downloaded and run your browser on a computer. The two programs are DVDVideoSoft's "Free Disk Burner" and the other "Convert Video" by X2XSoft. I use video conversion to convert my video the Audio_TS and Video_TS files and output them both in a directory on your hard drive. C:/DVDdirectory/Audio_TS and Video_TS/DVDdirectory/C: use of software Free Burner of disc to burn both files on the DVD. The files to burn must be considered in the as free disc burner: Audio_TS Video_TS, otherwise your DVD will not play on anything!
Free disc burner "finalize" the DVD for you. The Audio_TS is to render the sounds. The Video_TS is the image. Do not be misled by the Audio_TS bend not containing or not list all files! Your good and ready to burn.
A pointer, however. You will find your best record burning SPEED on "more SLOW! You may be using a DVD that can be recorded at 40 x or 48 x or 16 x, or some fast deal, but always choose 4 x or slower. I check in at 2.4 x and get better results than the faster speeds. You paid for the DVD, do what you want to do. Hope you can understand this and happy saving!
Maybe you are looking for
-
Cannot add PDF by using the email Yahoo email
I use email (yahoo product) Rocketmail I can't attach a PDF file to my outgoing emails, also use Norton 360-virus/firewall.Thank you
-
Hello, I have a table with 15 columns, and my 1st column is completed automatically by the database. How can I tell the program '' do not touch the 1st column"or something like that? White or no one is not ok. probably need something that never exec
-
OK brand new windows 7 home premium desktop did yesterday, all the running back usual disks etc. and update, but I was offered and installed the update above about 10 times. How can I fix this, have tried searching and I find Vista responds ok but no
-
Error loading \3\DLBUtime.dll I have a Dell computer that came with Windows XP Home edition. When I start my computer the monitoring of ERROR appears: RUNDLL error loading specified not found \3\DLBUtime.dll module I just click 'ok' and he goes, but
-
Greetings, I spilled a drink sweet in my X 200, fence it beyond all repair. The X 200 hard drive has ONLY one disk HARD password bios I created and you know. To try to recover my files from hard drive of the X 200, I removed the disk and inserted i