My figure number is not picking up from the previous chapter

Similar Questions

• Upgrade to 3.0 asking does not migrate settings from the previous version

  I have two jobs, I'm running and I have SQL Developer 3.0 upwards a race and has been invited to capture my preferences from my previous installation to the new version. Connections and reports have all migrated to this version. The other workstation, I did the same thing and when I tried to run SQL Developer tried to run first using the sqldeveloperW.exe and it hung and would not do anything and I had to reboot my box to use it more. I was able to run sql developer on this box since then however it does not ask me to migrate my settings from my previous installation. How can I do this?
  
  I tried to extract files in the directory running of deletion, I tried to find the registry settings (impossible to locate any for developer sql pertaining to the management of versions), I downloaded the new version again and extracted. Any help on this would be appreciated!
  
  Thanks, Ron

  You can delete all the SQL Developer\systemXXX folder under the (hidden) of your Windows user profile Application data. This will reset all default settings and ask for the migration.

  Have fun
  K.

• I installed Acrobat DC (upgrade) and it will not be installed. When is request a serial number from the previous it is not accepted. I use 9.0 which doesn't show in the drop-down window. How should I proceed?

  I installed Acrobat DC (upgrade) and it will not be installed. When is request a serial number from the previous it is not accepted. I use 9.0 which doesn't show in the drop-down window. How should I proceed?

  Hi davidm1224,

  I regret that we do not any version upgrade to Acrobat DC of Acrobat 9.

  You can buy the full version of Acrobat DC.

  For more details, please visit: Plans and prices | Adobe Acrobat DC

  Let us know if you encounter any problem.

  Concerning

  Meenakshi Negi

• HP Envy 7640: HP Envy 7640 will not print photos from the photo tray

  I bought a HP Envy 7640 today, 11/05/2016.  It will NOT print photos from the photo tray.   The printer has paper in all trays, but keep taking 8 1/2 x 11 paper rather than photo paper.  I use the default application for the display of pictures (Microsoft Office 2010) and have tried selecting both the 4x6in of the index card. and sizes of 4 x 6/10 x 15 cm.  The end result is the same, an image printed in the middle of the plain paper.  I searched the forums and found that two related threads.  Given that I just install the printer today, I figure there will be newer drivers in the last hour, so I finished downloading "printing HP and Scan doctor."  He finds a "Match of Port issue" and that fixed it, but when I printed another picture, he was still on plain paper.  If I remove the paper and leave only in photo paper, the printer throws a fit and said that it is out of paper.  Any ideas?  I'm not a newbie, but in more than 20 years of use of HP products, this is the first time that I had to fill out a problem for a Board of Directors.  (And with the instant the ink program, it starts to accumulate the number of my printing without a single success.)

  RESOLVED - photo, once you select the printer & paper, you must go into OPTIONS, then the properties of the printer, then go to the paper/quality tab, then the paper Source and select manually the specific bac (bac/Photo main tray).  Sheesh, should we not automatic as soon as you select the paper size?

• VI do not transfer data from the instrument.

  Hello to all who are interested.  I'm working on an instrument driver for an Agilent D3000A generator of signal (E4432A) trying to get the generator to sweep the amplitude of - 30dBm to-75dBm and then come back in a loop.  The loop is in a structure of the event and is called by a switch on the front panel.  When the switch is selected event triggers and loop information is passed to the VI.  The problem is the 'Sweeping Steps' VI does not use data from the number of points in the sweep and pause at each time and the tracks of the loop as the amplitude is just switching between the min and Max amplitude levels.  But once I have stop the generator program will continue sweeping (only in a sense) but the correct time and the number of points.  When I use the spy "measurement and Automation Explorer" program AND I do not see that the data are transferred in the instrument.  I don't know if the Subvi the execution order is correct and was amazing if someone could take a look and let me know if I have them in one order incorrectly.  Could not find an example of this type of program examples of the driver so there is little help.  I joined the program and the driver of instruments for your comment, then please take a look and send any information you think will help me to get this working properly.  I have also tried to run the single sweep mode sweep and have just the change of direction for the sweep to the other side of the ramp, but I still get the same results.

  The generator has 15th and ONU3 options.

  I, m using LabVIEW 2010 on a Dell Dimension 2400 running Windows XP and service pack Version 5.1.2600 Service Pack 3 Build 2600.
  Please let me know if you need other information.

  Thank you

  Just for the short term, right click on the structure of the event, select Configure the events managed by this case and uncheck the lock front panel.  Also, I don't know if you caught my edit.  I think your problem is your expectation (or lack of).  At your expectations to be slightly more than the number of steps to multiply by the pause time.  You must leave the instrument perform its scanning after all.

• "isass.exe system error indicates an encountered or specified revision number is not one known by the service." System does not boot.

  My roommate has downloaded a manual from LG Electronics cell phone in format .pdf (Adobe). The download is complete on Firefox. It double click on the download finished in the 'Download', its pc box became very slow and finally frozen. It is running Windows XP Media since 2004 / 2005.
  When it tried to reboot, the following message appeared...

  "... isass.exe system error indicates an encountered or specified revision number is not one known by the service." Continues it's maybe a more recent revision, then the service is aware of... »

  Then will continually attempt to restart. by a failure. Note the sequence of the events above are as accurate as the harshness.

  Does this mean the registry is damaged?

  Ran Iolo System Mechanic and has been able to run the tests in two (2). One of the physical drive and the other to the integrity of the partition. Nothing helps. A ran Norton recovery and found no errors. Performed a chkdsk /r and no mistake. Ran a chkdsk/p and found errors, but was not fixed. Any suggestions about where to start?

  I would like to thank all those who helped in my installation of Windows 8 Preview of consumer. He didn't find any problems of incompatibility with Norton a few months back and HP support said that the hard drive has been ruined, and I had to buy one of them after receiving the disks to install Win 7 again. Instead, I have used Drive Scrubber from Iolo System Mechanic and installed Win 7 perfectly. I'm now back with Windows 8. ALL of you are awseome!

  Donnie

  Hello

  Try to start in last know good confriguration pressing f8

  http://support.Microsoft.com/kb/307852

• You just edit Contacts in GMAIL and I can not restore my contacts from the previous version. I followed your instructions, but it has not restored nearly 500

  You just edit Contacts in GMAIL and I can not restore my contacts from the previous version. I followed your instructions, but it has not restored nearly 500 contacts that I have that are in other contacts.

  Hi robertsjohn125,
  Contacts are not supported in Firefox, unless you take on Firefox Desktop and Hello of Firefox?

  Where to manage your contacts, this might help to direct you to the correct support.

• I have HTC HTC ChaCha A810e but not picked up at the Nepal

  I have HTC HTC ChaCha A810e but not picked up at the Nepal.

  James,

  We have actually official ARMv6 builds now available for download: http://nightly.mozilla.org (select the download option ARMv6 downstairs in the Android category).

• I have a project in iMovie HD6 and want export to Final Cut Pro.  I see that it is not possible from the previous questions, but is it possible that I could maybe create a dvd of the iMovie project and then who import in Final Cut?

  I have a project in iMovie HD6 and want export to Final Cut Pro.  I see that it is not possible from the previous questions, but is it possible that I could maybe create a dvd of the iMovie project and then who import in Final Cut?  I just want to make a new trailer for the project.

  What you suggest is possible but it takes software and third-party quality loss.

  Instead, export a QuickTIme movie. If you have a choice of codecs, choose Apple Intermediate Codec. You can save it where you want it-maybe in the movies.

  Then import the movie into FCP as a clip.

  Good luck.

  Russ

• I use windows mail and put so once I go to windows mail notes are deleted from the Yahoo Server. Now, all of a sudden, they go in the trash of Yahoo instead of disappering

  Windows with Yahoo mail.

  
  
  I use windows mail and put so once I go to windows mail notes are deleted from the Yahoo Server. Now all of a sudden, they go in the trash of Yahoo instead of disappering. I use Yahoo mail for junk and spam of the screen, empty the trash from Yahoo, then open the remaining notes with Windows Mail after the release of Yahoo. This has just begun.

  It is not clear if you use a POP3 server or an IMAP account - it sounds as if it were an IMAP.  I don't know how messages get tossed into the trash from Yahoo rather than be removed.  You could try to remove the account, closing and reopening of Winmail opener and then adding the new account.  This resolve sometimes strange questions.  Also check interference antivirus (see www.oehelp.com/OETips.aspx#3).

  Steve

• Receiving the message "Wireless association failed because Windows did not receive response from the access point or wireless router" _

  My laptop was working fine yesterday, but when I started it today I get the message "Wireless association failed because Windows did not receive response from the access point or wireless router.

  I can see my network and I can connect to the internet using my desktop pc, but just to make complicated I can't even connect to the network when I plug the ethernet cable into my laptop.

  I think it might be a driver problem, but I have no idea how to solve this problem without access to the internet on my laptop.

  I'm running Vista and my wireless router is an Atheros AR5009 809.11a/g/n

  I need step by step instructions on this Yes please treat me like a fool!

  Thank you

  Laptop would not work at home thus concluded that it was a BT Broadband do not issue my driver (despite BT telling me the opposite last night)

  After the call to a fantastic Lady in BT it's all fixed and thanks to Jack I now know a lot more on connecting wireless to my laptop!

• MY sony handycam TRV11E is not picked up with the IEEE 1394 card in Windows.

  MY sony handycam TRV11E is not picked up with the IEEE1394 card.  I had installed Pinnacle and worked properly.  Subsequently, I remove pinnacle and install Platinum Sony vegas, now not working not not and does not detect not not the device.  I did nothing on my PC before or after, with the exception of all updates. I run XP and not even Windows 7 or Vista.  During some attempt at intervals of 2 windows gave me half a detection to ask with what program I want to run my DV on.  Then nothing.  Thanks for the plug-and-play.  What can suggest you I do.

  XP forums:

  http://social.answers.Microsoft.com/forums/en-us/category/WindowsXP

  Link above is for XP Forums.

  There is a list of the different Forums XP to the link above to help you.

  You get the help you need there.

  Here is the Vista Forums.

  See you soon

  Mick Murphy - Microsoft partner

• The lateset, 2015.5 edition, does not transfer data from the metadata, only the focal length objective. Disappointment when you want to know what that lens you used. (It allows to rename the files but after you create a second copy. "It's an improvement.)

  The last edition, 2015.5, does not transfer data from the metadata, only the focal length objective. Disappointment when you want to know what that lens you used. (It allows to rename the files but after you create a second copy. "It's an improvement.)

  Yes, copied files from Nikon NEF, DNG.

• I own 13 element to Win and just got my Mac Book so I downloaded the Mac version of 13 items and trying my serial number, but get the message that this serial number is not valid (I type the exact Win serial number I have my account

  Hello

  I have 13 element to WIN and just got my MacBook so I downloaded the MAC version of 13 items and trying to allow my serial number, but the message that this serial number is not valid (I type the exact Win serial number I have my account on the Adobe website)

  Since version 13 is no longer marketed, I will assume that you are since long TIME 30 days return policy

  You'll have to buy version 14 for your Mac... or install a software emulation to then run your program Windows on a Mac

• Since a windows 10 update on 09/12/15 my lightroom app will does not start I tried signing and return in, restart, reload the application, it will not start either from the desktop or the app cloud have other people encountered this problem?

  Since a windows 10 update on 09/12/15 my lightroom app will does not start I tried signing and return in, restart, reload the application, it will not start either from the desktop or the app cloud have other people encountered this problem?

  Hi rogerk94701487,

  Could you please check the event viewer and let me know the path of the defective Module once.

  How to check the event viewer: Photoshop CC 2015 crashing very frequently

  Kind regards

  Tanuj