My FlashDrive adobe quits working all the time why

Similar Questions

• Why internet explores quit working all the time

  every day I get a message telling me internet explore left why is - this? or cannot display a page why?

  Hi Dee Stelte,

  I see that you get the message that internet Explorer has stop working. I'll help you with this problem.

  1. What is the brand and model of the computer?

  2. what security software is installed on the computer?

  3. have you made changes on the computer recently?

  4. you have another browser installed on the computer?

  5. do you have a wired connection to the network or a connection to the wireless network?

  Method 1.

  Start the computer in safe mode with networking and check the status.

  Advanced startup options (including safe mode): http://windows.microsoft.com/en-US/windows7/Advanced-startup-options-including-safe-mode

  Method 2.

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

   

  Warning of Security Scanner: there could be a loss of data while performing an analysis using the Microsoft safety scanner to eliminate viruses as appropriate.

  Method 3.

  "Internet Explorer can not display the webpage" error in Internet Explorer: http://support.microsoft.com/kb/956196

  Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

   

  Warning: If you need to temporarily disable the antivirus to install other software. You must enable the antivirus as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to virus attacks.

  Disclaimer Clean Boot: boot allows you to check if any service or third party application startup is causing this issue. Note: Once you have finished troubleshooting, follow step 3 in the article to start on normal startup.

  How to troubleshoot a problem by performing a boot in Windows Vista or in Windows 7 and Windows 8:http://support.microsoft.com/kb/929135

   

  Important: System Restore will return all system files not as documents, email, music, etc., to a previous state. These files of types are completely affected by the restoration of the system. If it was your intention with this tool to recover a deleted file to non-system, try using a file instead of system restore recovery program.

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• I have iphone5s and my contact id does not work, all the time he show faild Setup touch id please help?

  I have iphone5s and my contact id does not work, all the time he show faild Setup touch id please help?

  Hi yjain51,

  I understand you had some problems recently with getting Touch ID to work reliably on your iPhone 5s. I know that it is a feature of great security for your iPhone, so I'm happy to help you.

  When you use Touch ID, make sure that your hands are free of any dirt or moisture so that fingerprints can be read clearly. This article explains further:

  Use the ID Touch on iPhone and iPad - Apple Support

  Thank you for using communities Support from Apple. See you soon!

• Tecra A9: How I get saved keys FN-esse to work all the time?

  How can I get my saved keys FN-esse to work all the time?

  It is without having to use the Toshiba Assist button to bring up the Fn-esse chart on my desk?

  Hi Cameillia

  Please excuse my question, but what do you do exactly?
  You want to use the FN + F1 - F9 button functionality without using the FN key?

  Sorry, but I think that it is not possible

  But if you use Vista OS, then you can use the mouse cursor and might point up, display area and could activate the Vista FlashCards.
  The FlashCards support the same functionality as the use of the keys FN + F1 - F9

  Concerning

• My screen saver does not work all the time, usually this seems to happen once the aircraft stopped in the energy saving mode.

  Original title: my screensaver does not work all the time

  My screen saver does not work all the time.  First time I have turn on computer, it works OK.  Later in the day, this isn't.  Usually, this seems to happen once the aircraft stopped in the energy saving mode.  After the reactivation of the computer (do not), the screen saver does not work when it should. How to run all the time?  I am running Kapersky Internet Security 2011.  This would be closed by the screen saver?
  Thanks, Garybuyit

  Hi garybuyit,

  Thanks for posting your question in the Microsoft answers Forums.

  Just so I'm clear, updated you the graphics cards in Device Manager? You have access to a Windows XP installation disc. If so, follow the steps in this document to make a scan of the SFC. This analysis will attempt to repair or replace any missing or corrupted system files.

• Computer is very slow and IE does not work all the time.

  I bought a computer from my old employeer.  He is doing all sorts of things, or should I say not to do all sorts of things.  It is very slow and IE does not work all the time.  They have questions arise and ask if the administrator oks things and other things like that.  It came with any disks.  I would like to wipe, clean and load a new disc, but I don't know where to find the disc or if I can do it.   Can someone please?

  Hello

  Proceed as follows to contribute to these two questions. You can probably buy the disks of Vista machine to system or get
  the former employer to do it for you if necessary.

  Try these and it can also be a good idea to update your main drivers later. The General corruption can also play a
  role in this issue. And even the TCP/IP stack might need to be refreshed.

  What antivirus/antispyware/security products do you have on the machine? Be one you ALREADY had on this
  machine, including those you have uninstalled (they leave leftovers behind which can cause strange problems).

  If no joy there's something blocking perhaps.

  Start - All Programs - Accessories - System Tools - IE with no Addons - what works best?

  IE - Tools - Internet Options - Advanced - tab click on restore, and then click Reset - apply / OK

  IE - Tools - Internet Options - Security tab - click on reset all default areas - apply / OK

  Close and restart IE or IE with no addons

  not better?

  IE - tools - manage Addons (for sure disable SSV2 if it is there, it is no longer necessary but Java always install
  "(and it causes problems - you never update Java to go back in and turn it off again)." Search for other possible problems.

  Windows Defender - tools - software explore - look for problems with programs that do not look right. Permit
  are usually OK and "unauthorized" are not always bad. If in doubt about a program to ask about it here.

  Could be that a BHO - BHOremover - free - standalone program, needs no installation, download and run - not all
  are bad, but some can cause your question (toolbars are BHO).
  http://securityxploded.com/bhoremover.php

  Startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  Also get Malwarebytes - free - use as scanner only.

  http://www.Malwarebytes.org/

  --------------------------------

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then, run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------

  Departure - in the search box, type-> order

  at the top of the list to find COMMAND - CLICK RIGHT to it - RUN AS ADMIN

  Type the following commands (or copy and paste one at a time), each followed by pressing on enter.

  ipconfig/flushdns

  nbtstat-r

  nbtstat - RR

  netsh int Reinitialis

  netsh int ip reset

  netsh winsock reset

  RESET

  That resets your TCP/IP stack

  --------------------------------

  Maybe need of these:

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - Device Manager - Display Adapter - note the brand and complete model of your
  video card - double - tab of the driver - write version information. Now click on UPdate Driver (this
  cannot do anything as MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party with their
  own the software and drivers and all other main drivers that you have.

  Now go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restoration) and then of the manufacturer of the device
  (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for the BIOS, Chipset and software)
  updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after each installation.

  Repeat to the manufacturers - BTW on device at the DO NOT RUN THEIR SCANNER - manually check by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver in the Windows updates,
  This leaves ONE of Windows updates, but it will not install the drivers who are generally older and cause
  questions. If updates offers a new driver and then hide it (right click on it) and then go look for new ones
  manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• My driver support does not work all the time, won't let me connect, keeps losing internet connection.

  * Original title: SUPPORT of the PILOTS LOSE INTERNET.

  My driver support does not work all the time, won't let me connect, keeps losing internet connection.

  What do you mean by "driver support?

  If you have installed one of these offers of support software driver, you have installed malware.  The vast majority of them no useful software and installing a lot of malware on your computer.

  The drivers are not the soft thing you should normally be updated.  I recommend the updated drivers only in the case of a problem that has to solve, and it's rare.

  Is the ONLY source, you should consider for driver updates or OEM support site.  Even those who sometimes go way overboard in trying to update the drivers.  The latest Dell systems are equipped with updated software that checks for new updates every day.   In most cases, drivers are rarely updated after the first year of a product.

• Why my A30-S203 fans work all the time?

  Hello everyone,

  Fans of my A30-S203 always working at the intermediate level. In fact my average CPU usage is not more 3 percent. But these fans never cease.
  What could be the problem? This sound is really annoying me. And I think that it could also cause a hardware fault.

  Thank you...
  Tunc

  Hello

  Have you checked the settings of the power management utility?
  As far as I know there is an option called cooling method.
  Please change this option in Mid performance mode or in silent mode.

  Good bye

• Spoolsv.exe process works all the time and lose 50% of power (one of the two cores).

  I found that spoolsv.exe is given to printing. When this process is killed or ' cache/buffor Impression' service is stopped, printing is impossible. I tried to change to manual (in services.msc) automatic initialization, but this process does not start even I ask any application to print.
  Spoolsv.exe takes all the power of a core of mu CPU (core 2 duo). I have Windows 7 Professional x 86 poles. I have attached a few screenshots that might be useful. Sorry for my bad English.
  http://img693.imageshack.us/i/beznazwy5.PNG/
  http://img46.imageshack.us/i/beznazwy4w.PNG/
  http://img267.imageshack.us/i/beznazwy2c.PNG/

  Hey

  Yes Spoolsv.exe is a service that uses a lot of cache even when its not required.
  Here is a solution for this :->
  1. Go to Start, settings , then click Control Panel
  2. In the Control Panel window, double-click first Administrative Tools , then Services.
  3. In the right pane of the Services window, find and with the button straight on print spooler and then select stop.
  4. You have stopped this process, leave the window open. Now open my computer and navigate to the following folder.
     c:\windows\system32\spool\PRINTERS - in Windows Vista, XP, 95/98/ME

     or

     c:\winnt\system32\spool\PRINTERS - in NT\2000 of Windows

  5. Delete all files in the Printers folder. After you delete the files in this folder, go to the Services window, right-click on print spoolerand then select Startto reactivate the service.

  I hope this will help

  By http://www.exe-error-fixes.com/deal-high-cpu-usage-spoolsvexe-problem/

  Kind regards...

  Vipul Taneja. www.vipultaneja.com

• Create shortcut folders does not work all the time?

  I needed to create multiple folders shortcut for a project that needs them often, and I just couldn't. Still, I remember in the past and one of them actually have on my desktop for my photos.

  It appeared that in folder trees if I right click on the folder you want, "create shortcut" Option did not show upward! the same with the folders on my desktop would be! If rich of this conclusion, I copied my "recalcitrant" folder on the desktop (had to cut short the copy because it was great!), but got a copy of it on my desk (with only what he had time can be fully copied!). Then right clicked on it and the shortcut option appeared! I re routed the path to the original on my D drive folder and it works well.
  Obviously something does not work as it should and I don't have to do all this, so I hope someone knows the answer to this problem. Maybe a stupid option that must be checked on somewhere...

  I don't know if this is your question or not because it should either work, or not at all. The first fix, here is a zip file which will certainly not hurt to try. It's my answer for those who have reported lately that the new folder option did not work in Win7 canned.

  Do, or you have installed Chrome? It appears that an update of Chrome, (mid April 2013), is responsible. Here are two patches.

  How to remove and restore the default context Menu items 'New' in Windows 7 and Windows 8
  http://www.SevenForums.com/tutorials/28677-new-context-menu-remove-restore-default-menu-items.html

  If for any reason, the zip file doesn't work for you, check out the 'response' by Linda Yan in this thread.
  http://social.technet.Microsoft.com/forums/en-us/w7itprogeneral/thread/97de8a2a-12f2-4381-A409-a78f4ae551cf/#99395761-56de-4a76-8C2A-eab498ad735a

  Tip: When you save the text in Notepad, the default file format is .txt. Replace all files.

• Help please! My computer doesn't work all the time when go to different site due to the message that I've never seen before.

  Hello;

  I really need help because I can't use my computer with it this way. First of all, how it works so slow that it drives me crazy! Now, he has started to do something new; When I try to go to another site, it will be like freeze and then tell Internet Explorer {or any site that I find myself be on} has stopped working due to a long-running script and then when I look, and I can finally close this box bottom, he says that I need to retrieve the web page. I don't know what is happening, or what to do. The only thing I found which offers any kind of help, was supposed to deliver {I think} Windows, but that would be to remove all my toolbars, modules, everything and I just can't do that. Can someone help me please? Best Buy has won ' t even talk to me unless I have pay $60,00 the outset simply to look at; and then God knows how much more I have simply don't have everything. Any advice would be greatly appreciated! Thank you

  Bones1961

  Hi Bones1961,

  ·         Did you do changes on the computer before the show?

  ·         What version of IE are you using?

  ·         What is the full error message?

  ·         The issue is limited to any particular Web site?

  Follow these methods.

  For the question of Internet Explorer:

  Method 1: Follow the steps in the article.

  How to troubleshoot script errors in Internet Explorer

  Method 2: Perform an optimization of Internet Explorer.

  How to optimize Internet Explorer

  Note: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  For the computer running slow-release:

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode and check if the problem persists.

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 7 the link to start the computer to a Normal startupmode.

  Method 2: Follow the steps in the article.

  Optimize Windows 7 for better performance

  For reference:

  Slow PC? Optimize your computer for peak performance

  How to make a computer faster: 6 ways to speed up your PC

• IdeaPad Y570 sound does not work all the time

  My laptop is Y570

  The question, the sound does not work

  When I start windows I can hear the windows startup melody plays when I start windows media player, video YouTube, VLC player or any other software that requires sound it will not work unless:

  I go to sign in-online sound-online right click test Realtek HD Audio, then the sound works.

  I tried to fix it by the installed driver and reinstall, I went got the driver from Lenovo and it did not work. My speakers are JBL

  Please help me

  uninstall both... reboot then install realtek then reboot then install the drivers of onekey theater.

  http://support.Lenovo.com/en_US/downloads/detail.page?docid=DS018489

• 5 lightrrom crashes all the time

  My 5 Lightroom (Adobe Cloud) 'crash' all the time, with windows telling me there was a problem and I have to close the program. I can't work more than five minutes at a time! Can someone help, please? Thank you!

  This could help. Problem solved.

  I had the same problem but not as bad as you.

  good luck with it

• GeForce 7350LE graphics card fan is running all the time or at certain temperatures?

  I have a HP Pavilion m8147c Media Center with AMD Atlon 64 X 2 Dual Core processor 5600 + 2.80 GHz 3 GB of Ram and run these last time the parser when began to enter the mode "sleep" or something. Sometimes, there is a warning that says something like no signal DVI and one more, but still not long enough to read all this. I am running Vista Home Premium 32 bit. I had just installed a new game but enough course has nothing to do with that I used the system restore and backed up to a time before it was installed. At the beginning it was only when you play, but now, it happens with almost nothing running. This pc was purchased in July 2007 and I have another office but I let my wife use one and I use the other. I opened the folder and clean all the dust but noticed when I booted again that the fan does not work on the video card. I don't know if it lights at certain times or works all the time but I think that's the problem. He was about one hour and lights do not at all. Any information will be appreciated.

  captna wrote: thanks again for the help, I thought it was probably the case but never bothered with graphics cards before today. Any thoughts on an upgrade for not much more money? It was a pretty good pc when I bought it, but it is old, and there should be some video cards better for the same price that would work. I'll add some memory and while I am because the grandchildren need to play their games too. Do you know where to find an upgrade that would be compatible? Yet once again, I appreciate the help.

  Hello captna, here is a link for the specifications of your system. It shows that the system was delivered with a 300 Watt power supply.

  There is not much better performing video cards that work with a 300 Watt power supply. Most require at least a 400 Watt power supply or greater power.

  You could improve the feed and the video card, then possibly 4 new memory modules, but the cost would start to add up. On a system to make a few years about it, I don't know if this would be the way to go, or consider getting a new system.

  You could simply acquire a new video of the same type card and get the system back, because there was, or even try and find a graphics card fan to replace the failed fan. It would be the least expensive option.

  Your system was shipped with the memory 3 X 1 GB modules. It only supports 4 X 1 memory modules, so upgrading the memory would not help all that much. You'd probably remove the existing memory and install 4 new memory modules in order to be compatible with your system memory. It is not recommended to mix memory strips.

  Just some thoughts.

• The Adobe Flash plugin crashed when I pluging in my helmet... This happens all the time.

  All the time when I'm trying to connect my headset. The Adobe Flash Player plugin has crashed. I'm tired of Firefox. All the movies I have already downloaded lost. I have to restart again. I had to use other browsers such as Opera and Chrome. I'm really tired.

  -> Adobe Flash plugin has crashed - avoid that it happen

  Check and tell if its working.